Modelica Buildings library 8.0.0 released
The Modelica Buildings library 8.0.0 was released on June 08, 2021.
Version 8.0.0 is a major release that contains the first version of the Spawn of EnergyPlus coupling that has been developed by LBNL and NREL in collaboration with Modelon and Objexx Engineering.
The library has been tested with Dymola 2021 and 2022, JModelica (revision 14023), and OPTIMICA (revision OCT-stable-r19089_JM-r14295).
The following major changes have been made:
- The package
Buildings.ThermalZones.EnergyPluscontains the first version of the Spawn of EnergyPlus coupling that is being developed at lbl-srg.github.io/soep. The Spawn coupling allows modeling HVAC and controls in Modelica, and graphically connecting to EnergyPlus models for thermal zones, schedules, EMS actuators and output variables. This allows, for example, modeling HVAC systems, HVAC controls and controls for active facade systems in Modelica, and using the EnergyPlus envelope model to simulate heat transfer through the building envelope, including the heat and light transmission through the windows for the current control signal of the active shade. - The package
Buildings.Experimental.DHCcontains models for district heating and cooling systems that are being developed for the URBANopt District Energy System software. - The new medium package
Buildings.Media.Antifreeze.PropyleneGlycolWaterallows modeling of propylene glycol–water mixtures. - A new cooling coil model
Buildings.Fluid.HeatExchangers.WetCoilEffectivenessNTUhas been added. This model is applicable for fully dry, partially wet, and fully wet regimes. In contrast toBuildings.Fluid.HeatExchangers.WetCoilCounterFlowand toBuildings.Fluid.HeatExchangers.WetCoilDiscretized, this model uses the epsilon-NTU relationship rather than a spatial discretization of the coil. This leads to fewer state variables and generally to a faster simulation. - New simplified door models for bidirectional air exchange between thermal zones are implemented in
Buildings.Airflow.Multizone. - Various other models have been improved or added, in particular for modeling of control sequences using the Control Description Language that has been developed in the OpenBuildingControl project at obc.lbl.gov.
For a detailed list of changes, see the release notes.
