Location: LBNL, Berkeley, CA

This training is internal for LBNL. Please see invitation for meeting location.


Install Dymola ( https://www.3ds.com/products-services/catia/products/dymola/trial-version/) and get the information for the license file from Jianjun Hu (jianjunhu@lbl.gov). For the introduction to Modelica, you can also use OpenModelica. However, OpenModelica won’t translate all models that we use in the 2nd day of the training.

You will also need to install the Buildings library. You can either use the latest version or use the latest development version.

For the third day, you will need to install JModelica. You can download JModelica from jmodelica.org. For Linux or OS X, you can also install docker and get the JModelica image using

docker pull michaelwetter/ubuntu-1604_jmodelica_trunk

On Linux or OS X, you can then simulate JModelica as described at https://github.com/lbl-srg/docker-ubuntu-jmodelica.

Make sure you do the installations before the training.

February 11, 2019, 2-4pm

This training gives an introduction to Modelica.

February 13, 2019, 2-4pm

This training gives an introduction to the Modelica Buildings library, to best practices for modeling, and to the development of Modelica models.

February 15, 2019, 2-4pm

This training gives an introduction FMI. Make sure you have JModelica installed which we will use to export and simulate an FMU.