Buildings.Obsolete.Fluid.Movers.Data.Pumps.Wilo
Package with performance data for Wilo pumps
Information
This package contains performance data for Wilo pumps.
Extends from Modelica.Icons.Package (Icon for standard packages).
Package Content
Name | Description |
---|---|
Stratos25slash1to4 | Pump data for a Wilo Stratos 25/1-4 pump |
Stratos32slash1to12 | Pump data for a Wilo Stratos 32/1-12 pump |
Buildings.Obsolete.Fluid.Movers.Data.Pumps.Wilo.Stratos25slash1to4
Pump data for a Wilo Stratos 25/1-4 pump
Information
Data from: http://productfinder.wilo.com/en/COM/product/0000000e000379df0002003a/fc_product_datasheet
See Buildings.Fluid.Movers.Data.Pumps.Wilo.Stratos25slash1to6 for more information about how the data is derived.
Extends from Generic (Generic data record for movers).
Parameters
Type | Name | Default | Description |
---|---|---|---|
VolumeFlowRate | V_flow_max | if havePressureCurve then (p... | Volume flow rate on the curve when pressure rise is zero [m3/s] |
PressureDifference | dpMax | if havePressureCurve then (p... | Pressure rise on the curve when flow rate is zero [Pa] |
Power computation | |||
HydraulicEfficiencyMethod | etaHydMet | Buildings.Fluid.Movers.BaseC... | Efficiency computation method for the hydraulic efficiency etaHyd |
MotorEfficiencyMethod | etaMotMet | if powerOrEfficiencyIsHydrau... | Efficiency computation method for the motor efficiency etaMot |
Boolean | powerOrEfficiencyIsHydraulic | false | =true if hydraulic power or efficiency is provided, instead of total |
efficiencyParameters | efficiency | Total or hydraulic efficiency vs. volumetric flow rate | |
efficiencyParameters | motorEfficiency | Motor efficiency vs. volumetric flow rate | |
efficiencyParameters_yMot | motorEfficiency_yMot | Motor efficiency vs. part load ratio yMot, where yMot = WHyd/WMot_nominal | |
peak | peak | Volume flow rate, pressure rise, and efficiency (either total or hydraulic) at peak condition | |
Power | WMot_nominal | if max(power.P) > Modelica.C... | Rated motor power [W] |
Efficiency | etaMot_max | 0.7 | Maximum motor efficiency [1] |
Motor heat rejection | |||
Boolean | motorCooledByFluid | true | If true, then motor heat is added to fluid stream |
Normalized speeds (used in model, default values assigned from speeds in rpm) | |||
Real | speed_nominal | 1 | Nominal rotational speed for flow characteristic [1] |
Real | constantSpeed | constantSpeed_rpm/speed_rpm_... | Normalized speed set point, used if inputType = Buildings.Fluid.Types.InputType.Constant [1] |
Real | speeds[:] | speeds_rpm/speed_rpm_nominal | Vector of normalized speed set points, used if inputType = Buildings.Fluid.Types.InputType.Stages [1] |
Speeds in RPM | |||
AngularVelocity_rpm | speed_rpm_nominal | 1800 | Nominal rotational speed for flow characteristic [rev/min] |
AngularVelocity_rpm | constantSpeed_rpm | speed_rpm_nominal | Speed set point, used if inputType = Buildings.Fluid.Types.InputType.Constant [rev/min] |
AngularVelocity_rpm | speeds_rpm[:] | {speed_rpm_nominal} | Vector of speed set points, used if inputType = Buildings.Fluid.Types.InputType.Stages [rev/min] |
Modelica definition
Buildings.Obsolete.Fluid.Movers.Data.Pumps.Wilo.Stratos32slash1to12
Pump data for a Wilo Stratos 32/1-12 pump
Information
Data from: http://productfinder.wilo.com/en/COM/product/0000000e000379df0002003a/fc_product_datasheet
See Buildings.Fluid.Movers.Data.Pumps.Wilo.Stratos25slash1to6 for more information about how the data is derived.
Extends from Generic (Generic data record for movers).
Parameters
Type | Name | Default | Description |
---|---|---|---|
VolumeFlowRate | V_flow_max | if havePressureCurve then (p... | Volume flow rate on the curve when pressure rise is zero [m3/s] |
PressureDifference | dpMax | if havePressureCurve then (p... | Pressure rise on the curve when flow rate is zero [Pa] |
Power computation | |||
HydraulicEfficiencyMethod | etaHydMet | Buildings.Fluid.Movers.BaseC... | Efficiency computation method for the hydraulic efficiency etaHyd |
MotorEfficiencyMethod | etaMotMet | if powerOrEfficiencyIsHydrau... | Efficiency computation method for the motor efficiency etaMot |
Boolean | powerOrEfficiencyIsHydraulic | false | =true if hydraulic power or efficiency is provided, instead of total |
efficiencyParameters | efficiency | Total or hydraulic efficiency vs. volumetric flow rate | |
efficiencyParameters | motorEfficiency | Motor efficiency vs. volumetric flow rate | |
efficiencyParameters_yMot | motorEfficiency_yMot | Motor efficiency vs. part load ratio yMot, where yMot = WHyd/WMot_nominal | |
peak | peak | Volume flow rate, pressure rise, and efficiency (either total or hydraulic) at peak condition | |
Power | WMot_nominal | if max(power.P) > Modelica.C... | Rated motor power [W] |
Efficiency | etaMot_max | 0.7 | Maximum motor efficiency [1] |
Motor heat rejection | |||
Boolean | motorCooledByFluid | true | If true, then motor heat is added to fluid stream |
Normalized speeds (used in model, default values assigned from speeds in rpm) | |||
Real | speed_nominal | 1 | Nominal rotational speed for flow characteristic [1] |
Real | constantSpeed | constantSpeed_rpm/speed_rpm_... | Normalized speed set point, used if inputType = Buildings.Fluid.Types.InputType.Constant [1] |
Real | speeds[:] | speeds_rpm/speed_rpm_nominal | Vector of normalized speed set points, used if inputType = Buildings.Fluid.Types.InputType.Stages [1] |
Speeds in RPM | |||
AngularVelocity_rpm | speed_rpm_nominal | 3580 | Nominal rotational speed for flow characteristic [rev/min] |
AngularVelocity_rpm | constantSpeed_rpm | speed_rpm_nominal | Speed set point, used if inputType = Buildings.Fluid.Types.InputType.Constant [rev/min] |
AngularVelocity_rpm | speeds_rpm[:] | {speed_rpm_nominal} | Vector of speed set points, used if inputType = Buildings.Fluid.Types.InputType.Stages [rev/min] |