Buildings.Fluid.SolarCollectors.Controls.Examples

Information

This package contains examples demonstrating the use of models that can be found in Buildings.Fluid.SolarCollectors.Controls.

Package Content

Name	Description
SolarPumpController	Example for the solar pump controller

Buildings.Fluid.SolarCollectors.Controls.Examples.SolarPumpController

Information

This model illustrates the use of the Buildings.Fluid.SolarCollectors.Controls.SolarPumpController model. Based on weather data and inlet temperature, the controller switches the pump on and off.

Modelica definition

model SolarPumpController "Example for the solar pump controller"
  extends Modelica.Icons.Example;
  Buildings.Fluid.SolarCollectors.Controls.SolarPumpController
        pumCon(per=
        Buildings.Fluid.SolarCollectors.Data.GlazedFlatPlate.FP_ThermaLiteHS20()) 
    "Model controlling the on/off status of the pump";
  Buildings.BoundaryConditions.WeatherData.ReaderTMY3 weaDat(
     filNam="modelica://Buildings/Resources/weatherdata/USA_CA_San.Francisco.Intl.AP.724940_TMY3.mos") 
    "Weather data input file";
  Modelica.Blocks.Sources.Sine sine(
    amplitude=20,
    freqHz=0.0001,
    offset=273.15 + 40) "Water inlet temperature";
equation 
  connect(weaDat.weaBus, pumCon.weaBus);
  connect(sine.y, pumCon.TIn);
end SolarPumpController;