Buildings.UsersGuide.ReleaseNotes

• Version 0.7.0 (September 29, 2009)
• Version 0.6.0 (May 15, 2009)
• Version 0.5.0 (February 19, 2009)
• Version 0.4.0 (October 31, 2008)
• Version 0.3.0 (September 30, 2008)
• Version 0.2.0 (June 17, 2008)
• Version 0.1.0 (May 27, 2008)

Package Content

Name	Description
Version_0_7_0	Version 0.7.0
Version_0_6_0	Version 0.6.0
Version_0_5_0	Version 0.5.0
Version_0_4_0	Version 0.4.0
Version_0_3_0	Version 0.3.0
Version_0_2_0	Version 0.2.0
Version_0_1_0	Version 0.1.0

Buildings.UsersGuide.ReleaseNotes.Version_0_7_0

• Updated library from Modelica_Fluid to Modelica.Fluid 1.0
• Merged sensor and source models from Modelica.Fluid to Buildings.Fluid.
• Added sensor for sensible and latent enthalpy flow rate, Buildings.Fluid.Sensors.SensibleEnthalpyFlowRate and Buildings.Fluid.Sensors.LatentEnthalpyFlowRate. These sensors are needed, for example, to interface air-conditioning systems that are modeled with Modelica with the Building Controls Virtual Test Bed.

Buildings.UsersGuide.ReleaseNotes.Version_0_6_0

• Added the package Buildings.Utilities.IO.BCVTB which contains an interface to the Building Controls Virtual Test Bed.
• Updated license to Modelica License 2.
• Replaced Buildings.Utilities.Psychrometrics.HumidityRatioPressure.mo by Buildings.Utilities.Psychrometrics.HumidityRatio_pWat.mo and Buildings.Utilities.Psychrometrics.VaporPressure_X.mo because the old model used RealInput ports, which are obsolete in Modelica 3.0.
• Changed the base class Buildings.Fluid.Interfaces.PartialStaticTwoPortHeatMassTransfer to enable computation of pressure drop of mechanical equipment.
• Introduced package Buildings.Fluid.BaseClasses.FlowModels to model pressure drop, and rewrote Buildings.Fluid.BaseClasses.PartialResistance.
• Redesigned package Buildings.Utilities.Math to allow having blocks and functions with the same name. Functions are now in Buildings.Utilities.Math.Functions.
• Fixed sign error in Buildings.Fluid.Storage.BaseClasses.Stratifier which caused a wrong energy balance in Buildings.Fluid.Storage.StratifiedEnhanced.
• Renamed Buildings.Fluid.HeatExchangers.HeaterCoolerIdeal to Buildings.Fluid.HeatExchangers.HeaterCoolerPrescribed to have the same nomenclatures as is used for Buildings.Fluid.MassExchangers.HumidifierPrescribed
• In Buildings.Fluid/Actuators/BaseClasses/PartialDamperExponential, added option to compute linearization near zero based on the fraction of nominal flow instead of the Reynolds number. This was set as the default, as it leads most reliably to a model parametrization that leads to a derivative d m_flow/d p near the origin that is not too steep for a Newton-based solver.
• In damper and VAV box models, added optional parameters to allow specifying the nominal face velocity instead of the area.
• Set nominal attribute for pressure drop dp in Buildings.Fluid.BaseClasses.PartialResistance and in its child classes.
• Added models for chiller ( Buildings.Fluid.Chillers.Carnot), for occupancy ( Buildings.Controls.SetPoints.OccupancySchedule) and for blocks that take a vector as an argument ( Buildings.Utilities.Math.Min, Buildings.Utilities.Math.Max, and Buildings.Utilities.Math.Average).
• Changed various variable names to be consistent with naming convention used in Modelica.Fluid 1.0.

Buildings.UsersGuide.ReleaseNotes.Version_0_5_0

• Updated library to Modelica.Fluid 1.0.
• Moved most examples from package Buildings.Fluid.Examples to the example directory in the package of the individual model.
• Renamed package Buildings.Utilites.Controls to Buildings.Utilites.Diagnostics.
• Introduced packages Buildings.Controls, Buildings.HeatTransfer (which contains models for heat transfer that generally does not involve modeling of the fluid flow), Buildings.Fluid.Boilers and Buildings.Fluid.HeatExchangers.Radiators.
• Changed valve models in Buildings.Fluid.Actuators.Valves so that Kv or Cv can be used as the flow coefficient (in [m3/h] or [USG/min]).

Buildings.UsersGuide.ReleaseNotes.Version_0_4_0

• Added package Buildings.Fluid.Storage with models for thermal energy storage.
• Added a steady-state model for a heat and moisture exchanger with constant effectiveness. See Buildings.Fluid.MassExchangers.ConstantEffectiveness
• Added package Buildings.Utilities.Reports. The package contains models that facilitate reporting.

Buildings.UsersGuide.ReleaseNotes.Version_0_3_0

• Added package Buildings.Fluid.Sources. The package contains models for modeling species that do not affect the medium balance of volumes. This can be used to track for example carbon dioxide or other species that have a small concentration.
• The package Buildings.Fluid.Actuators.Motors has been added. The package contains a motor model for valves and dampers.
• The package Buildings.Media has been reorganized and the new medium model Buildings.Media.GasesPTDecoupled.MoistAir has been added.
  In addition, this package now contains a bug fix that is needed for Modelica 2.2.1 and 2.2.2. The bugs are fixed by using a new base class Buildings.Media.Interfaces.PartialSimpleIdealGasMedium (that fixes the bugs) instead of Modelica.Media.Interfaces.PartialSimpleIdealGasMedium. In the original implementation, initial states of fluid volumes can be far away from the steady-state value because of an inconsistent implementation of the the enthalpy and internal energy. When the Buildings library is upgraded to to Modelica 3.0.0, it should be safe to remove this bug fix.
• The package Buildings.Fluid.HeatExchangers has been revised and several models have been renamed. The heat exchanger models have been revised to allow computing the fluid volumes either dynamically, or in steady-state.
• The damper with exponential opening characteristic has been revised to allow control signals over the whole range between 0 and 1. This was in earlier versions restricted. In the same model, a bug was fixed that caused the flow to be largest for y=0, i.e., when the damper is closed.
• Additional models for psychrometric equations have been added. The new models contain equations that convert dew point temperature and water vapor pressure, as well as water vapor concentration and water vapor pressure.
• A new mixing volume has been added that allows latent heat exchange with the volume. This model can be used to model a volume of moist air with water vapor condensation inside the volume. The condensate is removed from the volume in its liquid phase.

Buildings.UsersGuide.ReleaseNotes.Version_0_2_0

Buildings.UsersGuide.ReleaseNotes.Version_0_1_0

First release of the library.

This version contains basic models for modeling building HVAC systems. It also contains new medium models in the package Buildings.Media. These medium models have simpler property functions than the ones from Modelica.Media. For example, there is medium model with constant heat capacity which is often sufficiently accurate for building HVAC simulation, in contrast to the more detailed models from Modelica.Media that are valid in a larger temperature range, at the expense of introducing non-linearities due to the medium properties.