Buildings.Fluid.Geothermal.Borefields
Package with borefield models
Information
Package with models for geothermal borefields.
Extends from Modelica.Icons.VariantsPackage (Icon for package containing variants).
Package Content
| Name | Description |
|---|---|
 UsersGuide
|
User's Guide |
 OneUTube
|
Borefield model containing single U-tube boreholes |
| TwoUTubes
|
Borefield model containing double U-tube boreholes |
 Data
|
Collection of data records for ground heat exchanger models |
 Types
|
Package with type definitions |
 Examples
|
Example models for Buildings.Fluid.Geothermal.Borefields |
| Validation
|
Validation models for Buildings.Fluid.Geothermal.Borefields |
 BaseClasses
|
Base classes used in Buildings.Fluid.HeatExchangers.Ground |
Buildings.Fluid.Geothermal.Borefields.OneUTube
Borefield model containing single U-tube boreholes
Information
This model simulates a borefield containing one or many single U-tube boreholes
using the parameters in the borFieDat record.
Heat transfer to the soil is modeled using only one borehole heat exchanger. The fluid mass flow rate into the borehole is divided to reflect the per-borehole fluid mass flow rate. The borehole model calculates the dynamics within the borehole itself using an axial discretization and a resistance-capacitance network for the internal thermal resistances between the individual pipes and between each pipe and the borehole wall.
Extends from Buildings.Fluid.Geothermal.Borefields.BaseClasses.PartialBorefield (Borefield model using single U-tube borehole heat exchanger configuration.Calculates the average fluid temperature T_fts of the borefield for a given (time dependent) load Q_flow).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| replaceable package Medium | PartialMedium | Medium in the component | |
| Time | tLoaAgg | 300 | Time resolution of load aggregation [s] |
| Integer | nCel | 5 | Number of cells per aggregation level |
| Integer | nSeg | 10 | Number of segments to use in vertical discretization of the boreholes |
| Template | borFieDat | Borefield data | |
| Assumptions | |||
| Boolean | allowFlowReversal | true | = false to simplify equations, assuming, but not enforcing, no flow reversal |
| Advanced | |||
| MassFlowRate | m_flow_small | 1E-4*abs(m_flow_nominal) | Small mass flow rate for regularization of zero flow [kg/s] |
| Boolean | forceGFunCalc | false | Set to true to force the thermal response to be calculated at the start instead of checking whether this has been pre-computed |
| Diagnostics | |||
| Boolean | show_T | false | = true, if actual temperature at port is computed |
| Flow resistance | |||
| Boolean | from_dp | false | = true, use m_flow = f(dp) else dp = f(m_flow) |
| Boolean | linearizeFlowResistance | false | = true, use linear relation between m_flow and dp for any flow rate |
| Real | deltaM | 0.1 | Fraction of nominal flow rate where flow transitions to laminar |
| Dynamics | |||
| Conservation equations | |||
| Dynamics | energyDynamics | Modelica.Fluid.Types.Dynamic... | Type of energy balance: dynamic (3 initialization options) or steady state |
| Boolean | dynFil | true | Set to false to remove the dynamics of the filling material. |
| Initialization | |||
| AbsolutePressure | p_start | Medium.p_default | Start value of pressure [Pa] |
| Temperature | TFlu_start[nSeg] | TGro_start | Start value of fluid temperature [K] |
| Soil | |||
| Temperature | TExt0_start | 283.15 | Initial far field temperature [K] |
| Temperature | TExt_start[nSeg] | {if z[i] >= z0 then TExt0_st... | Temperature of the undisturbed ground [K] |
| Filling material | |||
| Temperature | TGro_start[nSeg] | TExt_start | Start value of grout temperature [K] |
| Temperature profile | |||
| Height | z0 | 10 | Depth below which the temperature gradient starts [m] |
| Real | dT_dz | 0.01 | Vertical temperature gradient of the undisturbed soil for h below z0 [K/m] |
Connectors
| Type | Name | Description |
|---|---|---|
| FluidPort_a | port_a | Fluid connector a (positive design flow direction is from port_a to port_b) |
| FluidPort_b | port_b | Fluid connector b (positive design flow direction is from port_a to port_b) |
| output RealOutput | TBorAve | Average borehole wall temperature in the borefield [K] |
Modelica definition
Buildings.Fluid.Geothermal.Borefields.TwoUTubes
Borefield model containing double U-tube boreholes
Information
This model simulates a borefield containing one or many double U-tube boreholes
using the parameters in the borFieDat record.
Heat transfer to the soil is modeled using only one borehole heat exchanger. The fluid mass flow rate into the borehole is divided to reflect the per-borehole fluid mass flow rate. The borehole model calculates the dynamics within the borehole itself using an axial discretization and a resistance-capacitance network for the internal thermal resistances between the individual pipes and between each pipe and the borehole wall.
Extends from Buildings.Fluid.Geothermal.Borefields.BaseClasses.PartialBorefield (Borefield model using single U-tube borehole heat exchanger configuration.Calculates the average fluid temperature T_fts of the borefield for a given (time dependent) load Q_flow).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| replaceable package Medium | PartialMedium | Medium in the component | |
| Time | tLoaAgg | 300 | Time resolution of load aggregation [s] |
| Integer | nCel | 5 | Number of cells per aggregation level |
| Integer | nSeg | 10 | Number of segments to use in vertical discretization of the boreholes |
| Template | borFieDat | Borefield data | |
| Assumptions | |||
| Boolean | allowFlowReversal | true | = false to simplify equations, assuming, but not enforcing, no flow reversal |
| Advanced | |||
| MassFlowRate | m_flow_small | 1E-4*abs(m_flow_nominal) | Small mass flow rate for regularization of zero flow [kg/s] |
| Boolean | forceGFunCalc | false | Set to true to force the thermal response to be calculated at the start instead of checking whether this has been pre-computed |
| Diagnostics | |||
| Boolean | show_T | false | = true, if actual temperature at port is computed |
| Flow resistance | |||
| Boolean | from_dp | false | = true, use m_flow = f(dp) else dp = f(m_flow) |
| Boolean | linearizeFlowResistance | false | = true, use linear relation between m_flow and dp for any flow rate |
| Real | deltaM | 0.1 | Fraction of nominal flow rate where flow transitions to laminar |
| Dynamics | |||
| Conservation equations | |||
| Dynamics | energyDynamics | Modelica.Fluid.Types.Dynamic... | Type of energy balance: dynamic (3 initialization options) or steady state |
| Boolean | dynFil | true | Set to false to remove the dynamics of the filling material. |
| Initialization | |||
| AbsolutePressure | p_start | Medium.p_default | Start value of pressure [Pa] |
| Temperature | TFlu_start[nSeg] | TGro_start | Start value of fluid temperature [K] |
| Soil | |||
| Temperature | TExt0_start | 283.15 | Initial far field temperature [K] |
| Temperature | TExt_start[nSeg] | {if z[i] >= z0 then TExt0_st... | Temperature of the undisturbed ground [K] |
| Filling material | |||
| Temperature | TGro_start[nSeg] | TExt_start | Start value of grout temperature [K] |
| Temperature profile | |||
| Height | z0 | 10 | Depth below which the temperature gradient starts [m] |
| Real | dT_dz | 0.01 | Vertical temperature gradient of the undisturbed soil for h below z0 [K/m] |
Connectors
| Type | Name | Description |
|---|---|---|
| FluidPort_a | port_a | Fluid connector a (positive design flow direction is from port_a to port_b) |
| FluidPort_b | port_b | Fluid connector b (positive design flow direction is from port_a to port_b) |
| output RealOutput | TBorAve | Average borehole wall temperature in the borefield [K] |