Buildings.Fluid.HeatExchangers.ActiveBeams.Data

Package with performance data

Package with performance data for active beams.

Extends from Modelica.Icons.MaterialPropertiesPackage (Icon for package containing property classes).

Name	Description
Trox	Performance data for Trox
Generic	Generic data record for active beam
BaseClasses	Base classes for performance data

Buildings.Fluid.HeatExchangers.ActiveBeams.Data.Generic

Generic data record for active beam

Performance data for a generic active beam.

Extends from Modelica.Icons.Record (Icon for records).

Type	Name	Description
AirFlow	primaryAir	Performance data for primary air
WaterFlow	water	Performance data for water
TemperatureDifference	dT	Performance data for normalized temperature difference room minus water inlet
Nominal condition
MassFlowRate	mAir_flow_nominal	Nominal air mass flow rate per beam [kg/s]
MassFlowRate	mWat_flow_nominal	Nominal water mass flow rate per beam [kg/s]
PressureDifference	dpWat_nominal	Water-side nominal pressure drop per beam [Pa]
PressureDifference	dpAir_nominal	Air-side nominal pressure drop [Pa]
TemperatureDifference	dT_nominal	Nominal temperature difference water inlet minus room air [K]
HeatFlowRate	Q_flow_nominal	Nominal capacity per beam [W]

record Generic "Generic data record for active beam" extends Modelica.Icons.Record; parameter BaseClasses.AirFlow primaryAir(r_V={0,0.2,1}, f={0,0.5,1}) "Performance data for primary air"; parameter Buildings.Fluid.HeatExchangers.ActiveBeams.Data.BaseClasses.WaterFlow water(r_V={0,0.5,1}, f={0,0.7,1}) "Performance data for water"; parameter BaseClasses.TemperatureDifference dT(r_dT={0,0.5,1}, f={0,0.5,1}) "Performance data for normalized temperature difference room minus water inlet"; parameter Modelica.SIunits.MassFlowRate mAir_flow_nominal "Nominal air mass flow rate per beam"; parameter Modelica.SIunits.MassFlowRate mWat_flow_nominal "Nominal water mass flow rate per beam"; parameter Modelica.SIunits.PressureDifference dpWat_nominal(displayUnit="Pa") "Water-side nominal pressure drop per beam"; parameter Modelica.SIunits.PressureDifference dpAir_nominal(displayUnit="Pa") "Air-side nominal pressure drop"; parameter Modelica.SIunits.TemperatureDifference dT_nominal "Nominal temperature difference water inlet minus room air"; parameter Modelica.SIunits.HeatFlowRate Q_flow_nominal "Nominal capacity per beam"; end Generic;