Buildings.Electrical.DC.Conversion.Examples
Package with example models
Information
This package contains examples for the use of models that can be found in Buildings.Electrical.DC.Conversion.
Extends from Modelica.Icons.ExamplesPackage (Icon for packages containing runnable examples).
Package Content
| Name | Description |
|---|---|
 DCDCConverter
|
Test model DC to DC converter |
Buildings.Electrical.DC.Conversion.Examples.DCDCConverter
Test model DC to DC converter
Information
This model illustrates the use of a model that converts between DC voltages.
Extends from Modelica.Icons.Example (Icon for runnable examples).
Modelica definition
model DCDCConverter "Test model DC to DC converter"
extends Modelica.Icons.Example;
Buildings.Electrical.DC.Loads.Conductor resistor(
mode=Buildings.Electrical.Types.Load.FixedZ_steady_state,
P_nominal=-2000,
V_nominal=60) "Resistive load";
Buildings.Electrical.DC.Sources.ConstantVoltage sou(V=120) "Voltage source";
Buildings.Electrical.DC.Conversion.DCDCConverter conDCDC(
VHigh=120,
VLow=60,
eta=0.9) "DC/DC transformer";
Buildings.Electrical.DC.Loads.Conductor conductor(
mode=Buildings.Electrical.Types.Load.VariableZ_P_input,
V_nominal=60,
P_nominal=10e3) "Variable resistive load";
Modelica.Blocks.Sources.Ramp varLoad_P(
duration=0.5,
startTime=0.3,
offset=-1000,
height=10000);
Buildings.Electrical.DC.Sensors.GeneralizedSensor sen "Power sensor";
equation
connect(varLoad_P.y, conductor.Pow);
connect(conDCDC.terminal_p, resistor.terminal);
connect(conDCDC.terminal_p, conductor.terminal);
connect(sou.terminal, sen.terminal_n);
connect(sen.terminal_p, conDCDC.terminal_n);
end DCDCConverter;