Buildings.Electrical.DC.Sources

Package with models for DC sources

Information

This package contains models that represent different types of DC sources.

Extends from Modelica.Icons.SourcesPackage (Icon for packages containing sources).

Package Content

Name	Description
ConstantVoltage	Model of a constant DC voltage source
PVSimple	Simple PV model
PVSimpleOriented	Simple PV model with orientation
VoltageSource	Model of a generoic DC voltage source
WindTurbine	Wind turbine with power output based on table as a function of wind speed
Examples	Package with example models
BaseClasses	Package with base classes for DC sources

Buildings.Electrical.DC.Sources.ConstantVoltage

Model of a constant DC voltage source

Buildings.Electrical.DC.Sources.ConstantVoltage

Information

This model represents a simple DC voltage source with constant voltage.

Extends from Buildings.Electrical.Interfaces.Source (Partial model of a generic source.).

Parameters

Type	Name	Default	Description
replaceable package PhaseSystem		OnePhase	Phase system
Voltage	V		Value of constant voltage [V]
Reference Parameters
Boolean	potentialReference	true	Serve as potential root for the reference angle theta
Boolean	definiteReference	false	Serve as definite root for the reference angle theta

Connectors

Type	Name	Description
replaceable package PhaseSystem		Phase system
NegativePin	n	Negative pin

Modelica definition

model ConstantVoltage "Model of a constant DC voltage source" extends Buildings.Electrical.Interfaces.Source( redeclare package PhaseSystem = PhaseSystems.TwoConductor, redeclare Interfaces.Terminal_p terminal, final potentialReference=true, final definiteReference=false); parameter Modelica.SIunits.Voltage V(start=1) "Value of constant voltage"; Modelica.Electrical.Analog.Interfaces.NegativePin n "Negative pin"; equation terminal.v[1] = V; terminal.v[2] = n.v; sum(terminal.i) + n.i = 0; end ConstantVoltage;

Buildings.Electrical.DC.Sources.PVSimple

Simple PV model

Buildings.Electrical.DC.Sources.PVSimple

Information

Model of a simple photovoltaic array.

This model computes the power as

P=A f_act η G

where A is the panel area, f_act is the fraction of the aperture area, η is the panel efficiency and G is the total solar irradiation. This power is equal to P = v i, where v is the voltage across the panel and i is the current that flows through the panel.

To avoid a large voltage drop the panel electric connector, it is recommended to use this model together with a model that prescribes the voltage. See Buildings.Electrical.DC.Sources.Examples.PVSimple.

Note: This model takes as input the total solar irradiation on the panel. This has to be computed converting the incoming radiation to take tilt and azimuth into account.

Extends from Buildings.Electrical.Interfaces.PartialPV (Base model for a PV system).

Parameters

Type	Name	Default	Description
Area	A		Net surface area [m2]
Real	fAct	0.9	Fraction of surface area with active solar cells [1]
Real	eta	0.12	Module conversion efficiency [1]
replaceable package PhaseSystem		PartialPhaseSystem	Phase system
Nominal conditions
Voltage	V_nominal		Nominal voltage (V_nominal >= 0) [V]

Connectors

Type	Name	Description
output RealOutput	P	Generated power [W]
replaceable package PhaseSystem		Phase system
input RealInput	G	Total solar irradiation per unit area [W/m2]

Modelica definition

model PVSimple "Simple PV model" extends Buildings.Electrical.Interfaces.PartialPV(redeclare package PhaseSystem = PhaseSystems.TwoConductor, redeclare Interfaces.Terminal_p terminal); protected Loads.Conductor con(mode=Types.Load.VariableZ_P_input, V_nominal=V_nominal) "Conductor, used to interface power with electrical circuit"; equation connect(con.terminal, terminal); connect(solarPower.y, con.Pow); end PVSimple;

Buildings.Electrical.DC.Sources.PVSimpleOriented

Simple PV model with orientation

Buildings.Electrical.DC.Sources.PVSimpleOriented

Information

Model of a simple photovoltaic array.

This model computes the power as

P=A f_act η G

where A is the panel area, f_act is the fraction of the aperture area, η is the panel efficiency and G is the total solar irradiation, which is the sum of direct and diffuse irradiation. The model takes into account the location and the orientation of the PV panel, specified by the surface tilt, latitude and azimuth.

This power is equal to P = v i, where v is the voltage across the panel and i is the current that flows through the panel.

This model takes as an input the direct and diffuse solar radiation from the weather data bus.

Extends from Buildings.Electrical.Interfaces.PartialPVOriented (Base model of a PV system with orientation).

Parameters

Type	Name	Default	Description
Area	A		Net surface area [m2]
Real	fAct	0.9	Fraction of surface area with active solar cells [1]
Real	eta	0.12	Module conversion efficiency [1]
replaceable package PhaseSystem		PartialPhaseSystem	Phase system
Orientation
Angle	til		Surface tilt [rad]
Angle	lat		Latitude [rad]
Angle	azi		Surface azimuth [rad]
Nominal conditions
Voltage	V_nominal		Nominal voltage (V_nominal >= 0) [V]

Connectors

Type	Name	Description
output RealOutput	P	Generated power [W]
replaceable package PhaseSystem		Phase system
Bus	weaBus	Weather data

Modelica definition

model PVSimpleOriented "Simple PV model with orientation" extends Buildings.Electrical.Interfaces.PartialPVOriented( redeclare package PhaseSystem = PhaseSystems.TwoConductor, redeclare Interfaces.Terminal_p terminal, redeclare Buildings.Electrical.DC.Sources.PVSimple panel(V_nominal= V_nominal)); end PVSimpleOriented;

Buildings.Electrical.DC.Sources.VoltageSource

Model of a generoic DC voltage source

Buildings.Electrical.DC.Sources.VoltageSource

Information

This model represents a simple DC voltage source with variable voltage.

Extends from Buildings.Electrical.Interfaces.VariableVoltageSource (Partial model of a generic variable voltage source.).

Parameters

Type	Name	Default	Description
replaceable package PhaseSystem		OnePhase	Phase system
Boolean	use_V_in	true	If true, the voltage is an input
Reference Parameters
Boolean	potentialReference	true	Serve as potential root for the reference angle theta
Boolean	definiteReference	false	Serve as definite root for the reference angle theta
Initialization
Voltage	V.start	1	Value of constant voltage [V]
RealInput	V_in.start	1	Input voltage [V]

Connectors

Type	Name	Description
replaceable package PhaseSystem		Phase system
NegativePin	n	Negative pin
Initialization
input RealInput	V_in	Input voltage [V]

Modelica definition

model VoltageSource "Model of a generoic DC voltage source" extends Buildings.Electrical.Interfaces.VariableVoltageSource( V(start=1), redeclare package PhaseSystem = PhaseSystems.TwoConductor, redeclare Interfaces.Terminal_p terminal, final potentialReference=true, final definiteReference=false); Modelica.Electrical.Analog.Interfaces.NegativePin n "Negative pin"; equation terminal.v[1] = V_in_internal; terminal.v[2] = n.v; sum(terminal.i) + n.i = 0; end VoltageSource;

Buildings.Electrical.DC.Sources.WindTurbine

Wind turbine with power output based on table as a function of wind speed

Buildings.Electrical.DC.Sources.WindTurbine

Information

Model of a wind turbine whose power is computed as a function of wind-speed as defined in a table.

Input to the model is the local wind speed. The model requires the specification of a table that maps wind speed in meters per second to generated power P_t in Watts. The model has a parameter called scale with a default value of one that can be used to scale the power generated by the wind turbine. The generated DC electrical power is

P = P_t scale = v i,

where v is the voltage and i is the current. For example, the following specification (with default scale=1) of a wind turbine

  WindTurbine_Table tur(
    table=[3.5, 0;
           5.5,   100;
           12, 900;
           14, 1000;
           25, 1000]) "Wind turbine";

yields the performance shown below. In this example, the cut-in wind speed is 3.5 meters per second, and the cut-out wind speed is 25 meters per second, as entered by the first and last entry of the wind speed column. Below and above these wind speeds, the generated power is zero.

alt-image

Extends from Buildings.Electrical.Interfaces.PartialWindTurbine (Partial model of a wind turbine with power output based on table as a function of wind speed).

Parameters

Type	Name	Default	Description
Real	scale	1	Scaling factor, used to allow adjusting the power output without changing the table
Boolean	tableOnFile	false	true, if table is defined on file or in function usertab
Real	table[:, 2]	[3.5, 0; 5.5, 0.1; 12, 0.9; ...	Table of generated power (first column is wind speed, second column is power)
String	tableName	"NoName"	Table name on file or in function usertab (see documentation)
String	fileName	"NoName"	File where matrix is stored
replaceable package PhaseSystem		PartialPhaseSystem	Phase system
Wind correction
Real	h		Height over ground
Height	hRef	10	Reference height for wind measurement [m]
Real	nWin	0.4	Height exponent for wind profile calculation
Nominal conditions
Voltage	V_nominal		Nominal voltage (V_nominal >= 0) [V]

Connectors

Type	Name	Description
input RealInput	vWin	Steady wind speed [m/s]
output RealOutput	P	Generated power [W]
replaceable package PhaseSystem		Phase system

Modelica definition

model WindTurbine "Wind turbine with power output based on table as a function of wind speed" extends Buildings.Electrical.Interfaces.PartialWindTurbine(redeclare package PhaseSystem = Buildings.Electrical.PhaseSystems.TwoConductor, redeclare Buildings.Electrical.DC.Interfaces.Terminal_p terminal); protected Loads.Conductor con(mode=Buildings.Electrical.Types.Load.VariableZ_P_input, V_nominal=V_nominal) "Conductor, used to interface the power with the electrical circuit"; equation connect(con.terminal, terminal); connect(gain.y, con.Pow); end WindTurbine;