partial model PartialRoom "Partial model for a room" package MediumA = Buildings.Media.Air ( T_default=283.15) "Medium model"; parameter Integer nConExtWin=0 "Number of constructions with a window"; parameter Integer nConBou=0 "Number of surface that are connected to constructions that are modeled inside the room"; parameter Integer nSurBou=0 "Number of surface that are connected to the room air volume"; parameter Integer nConExt=0 "Number of exterior constructions withour a window"; parameter Integer nConPar=0 "Number of partition constructions"; Buildings.Rooms.CFD roo( redeclare package Medium = MediumA, nConBou=nConBou, nSurBou=nSurBou, nConExt=nConExt, sensorName={"Occupied zone air temperature","Velocity"}, useCFD=true, nConPar=nConPar, nConExtWin=nConExtWin, AFlo=1*1, hRoo=1, linearizeRadiation=true, samplePeriod=60, cfdFilNam="modelica://Buildings/Resources/Data/Rooms/FFD/OnlyWall.ffd", massDynamics=Modelica.Fluid.Types.Dynamics.FixedInitial, lat=0.00022318989969804) "Room model"; Modelica.Blocks.Sources.Constant qConGai_flow(k=0) "Convective heat gain"; Modelica.Blocks.Sources.Constant qRadGai_flow(k=0) "Radiative heat gain"; Modelica.Blocks.Routing.Multiplex3 multiplex3_1; Modelica.Blocks.Sources.Constant qLatGai_flow(k=0) "Latent heat gain"; Buildings.BoundaryConditions.WeatherData.ReaderTMY3 weaDat( filNam="modelica://Buildings/Resources/weatherdata/USA_IL_Chicago-OHare.Intl.AP.725300_TMY3.mos", TDryBul= 293.15); equation connect(qRadGai_flow.y, multiplex3_1.u1[1]); connect(qConGai_flow.y, multiplex3_1.u2[1]); connect(qLatGai_flow.y, multiplex3_1.u3[1]); connect(multiplex3_1.y, roo.qGai_flow); connect(weaDat.weaBus, roo.weaBus); end PartialRoom;