LBL logo

Buildings.HeatTransfer.Convection.Functions

Functions for convective heat transfer

Information

This package contains functions that are used in the package Buildings.HeatTransfer.

Package Content

Name Description
Buildings.HeatTransfer.Convection.Functions.windDirectionModifier windDirectionModifier Wind direction modifier that is used to compute the wind-driven convective heat transfer coefficient
Buildings.HeatTransfer.Convection.Functions.HeatFlux HeatFlux Correlations for convective heat flux

Buildings.HeatTransfer.Convection.Functions.windDirectionModifier Buildings.HeatTransfer.Convection.Functions.windDirectionModifier

Wind direction modifier that is used to compute the wind-driven convective heat transfer coefficient

Information

Function that outputs 1 if the incidence angle is below 100 degrees, and 0.5 otherwise. The implementation is once continuously differentiable in its input arguments.

See Buildings.HeatTransfer.Examples.ExteriorConvection for an example that uses this function.

Extends from Modelica.Icons.Function (Icon for functions).

Inputs

TypeNameDefaultDescription
Angleazi Surface azimuth [rad]
Angledir Wind direction (0=wind from North) [rad]

Outputs

TypeNameDescription
RealWWind direction modifier

Modelica definition

function windDirectionModifier "Wind direction modifier that is used to compute the wind-driven convective heat transfer coefficient" extends Modelica.Icons.Function; input Modelica.SIunits.Angle azi "Surface azimuth"; input Modelica.SIunits.Angle dir(min=0, max=2*Modelica.Constants.pi) "Wind direction (0=wind from North)"; output Real W "Wind direction modifier"; protected constant Modelica.SIunits.Angle lee = Modelica.SIunits.Conversions.from_deg(100) "Angle at which the transition occurs"; constant Real cosLee = Modelica.Math.cos(lee) "Cosine of the angle at which the transition occurs"; algorithm // The wind direction is defined in TMY3 as dir=0 if from North, and 0 <= dir < 2*pi // Hence, we subtract pi to redefine dir=0 as wind coming from the south. // This simplifies the implementation since a surface azimuth is defined as azi=0 // if the surface is south-facing W:=Buildings.Utilities.Math.Functions.spliceFunction( pos=0.5, neg=1, x=cosLee-Modelica.Math.cos(azi+Modelica.Constants.pi-dir), deltax=0.05); end windDirectionModifier;

Automatically generated Mon Jul 13 14:26:31 2015.