Buildings.Fluid.HeatExchangers.Boreholes.Examples

Name	Description
UTube	Model that tests the borehole model

This example models a borehole heat exchanger with two pipes that are symmetrically spaced. The simulation period is 5 years. From the 4th to the 10th months, the mass flow source switches on the flow rate through the borehole. The leaving water of the mass flow source is 25°C, and the water that returns from the borehole is between 20.5°C and 21.5°C.

model UTube "Model that tests the borehole model" extends Modelica.Icons.Example; package Medium = Buildings.Media.Water; Buildings.Fluid.HeatExchangers.Boreholes.UTube borHol( redeclare each package Medium = Medium, hBor=150, dp_nominal=10000, dT_dz=0.0015, samplePeriod=604800, m_flow_nominal=0.3, redeclare each parameter Buildings.HeatTransfer.Data.BoreholeFillings.Bentonite matFil, redeclare parameter Buildings.HeatTransfer.Data.Soil.Sandstone matSoi, energyDynamics=Modelica.Fluid.Types.Dynamics.FixedInitial, TExt0_start=283.15, TFil0_start=283.15) "Borehole heat exchanger"; Sources.Boundary_ph sin(nPorts=1, redeclare package Medium = Medium) "Sink"; Sources.MassFlowSource_T sou( nPorts=1, redeclare package Medium = Medium, use_m_flow_in=true, T=298.15) "Source"; Modelica.Blocks.Sources.Pulse pulse( amplitude=0.3, period=365*86400, startTime=365*86400/4); equation connect(sou.ports[1], borHol.port_a); connect(borHol.port_b, sin.ports[1]); connect(pulse.y, sou.m_flow_in); end UTube;

Buildings.Fluid.HeatExchangers.Boreholes.Examples

Information

Package Content

Buildings.Fluid.HeatExchangers.Boreholes.Examples.UTube

Information

Modelica definition