LBL logo

Buildings.Utilities.Math.Functions

Package with mathematical functions

Information

This package contains functions for commonly used mathematical operations. The functions are used in the blocks Buildings.Utilities.Math.

Extends from Modelica.Icons.VariantsPackage (Icon for package containing variants).

Package Content

Name Description
Buildings.Utilities.Math.Functions.average average Average of a vector
Buildings.Utilities.Math.Functions.bicubic bicubic Bicubic function
Buildings.Utilities.Math.Functions.biquadratic biquadratic Biquadratic function
Buildings.Utilities.Math.Functions.booleanReplicator booleanReplicator Replicates Boolean signals
Buildings.Utilities.Math.Functions.cubicHermiteLinearExtrapolation cubicHermiteLinearExtrapolation Interpolate using a cubic Hermite spline with linear extrapolation
Buildings.Utilities.Math.Functions.integerReplicator integerReplicator Replicates integer signals
Buildings.Utilities.Math.Functions.inverseXRegularized inverseXRegularized Function that approximates 1/x by a twice continuously differentiable function
Buildings.Utilities.Math.Functions.isMonotonic isMonotonic Returns true if the argument is a monotonic sequence
Buildings.Utilities.Math.Functions.polynomial polynomial Polynomial function
Buildings.Utilities.Math.Functions.powerLinearized powerLinearized Power function that is linearized below a user-defined threshold
Buildings.Utilities.Math.Functions.quadraticLinear quadraticLinear Function that is quadratic in first argument and linear in second argument
Buildings.Utilities.Math.Functions.regNonZeroPower regNonZeroPower Power function, regularized near zero, but nonzero value for x=0
Buildings.Utilities.Math.Functions.smoothExponential smoothExponential Once continuously differentiable approximation to exp(-|x|) in interval |x| < delta
Buildings.Utilities.Math.Functions.smoothHeaviside smoothHeaviside Once continuously differentiable approximation to the Heaviside function
Buildings.Utilities.Math.Functions.smoothLimit smoothLimit Once continuously differentiable approximation to the limit function
Buildings.Utilities.Math.Functions.smoothMax smoothMax Once continuously differentiable approximation to the maximum function
Buildings.Utilities.Math.Functions.smoothMin smoothMin Once continuously differentiable approximation to the minimum function
Buildings.Utilities.Math.Functions.spliceFunction spliceFunction  
Buildings.Utilities.Math.Functions.splineDerivatives splineDerivatives Function to compute the derivatives for cubic hermite spline interpolation
Buildings.Utilities.Math.Functions.trapezoidalIntegration trapezoidalIntegration Integration using the trapezoidal rule
Buildings.Utilities.Math.Functions.Examples Examples Collection of models that illustrate model use and test models
Buildings.Utilities.Math.Functions.BaseClasses BaseClasses Package with base classes for Buildings.Utilities.Math.Functions

Buildings.Utilities.Math.Functions.average

Average of a vector

Information

This block outputs the average of the vector.

Inputs

TypeNameDefaultDescription
Integernin Number of inputs
Realu[nin] Input vector

Outputs

TypeNameDescription
RealyResult

Modelica definition

function average "Average of a vector" input Integer nin "Number of inputs"; input Real u[nin] "Input vector"; output Real y "Result"; algorithm y := sum(u)/nin; end average;

Buildings.Utilities.Math.Functions.bicubic

Bicubic function

Information

This function computes

y = a1 + a2 x1 + a3 x12 + a4 x2 + a5 x22 + a6 x1 x2 + a7 x1^3 + a8 x2^3 + a9 x12 x2 + a10 x1 x22

Inputs

TypeNameDefaultDescription
Reala[10] Coefficients
Realx1 Independent variable
Realx2 Independent variable

Outputs

TypeNameDescription
RealyResult

Modelica definition

function bicubic "Bicubic function" input Real a[10] "Coefficients"; input Real x1 "Independent variable"; input Real x2 "Independent variable"; output Real y "Result"; protected Real x1Sq "= x1^2"; Real x2Sq "= x2^2"; algorithm x1Sq :=x1*x1; x2Sq :=x2*x2; y := a[1] + a[2] * x1 + a[3] * x1^2 + a[4] * x2 + a[5] * x2^2 + a[6] * x1 * x2 + a[7] * x1Sq * x1 + a[8] * x2Sq * x2 + a[9] * x1Sq * x2 + a[10] * x1 * x2Sq; end bicubic;

Buildings.Utilities.Math.Functions.biquadratic

Biquadratic function

Information

This function computes

y = a1 + a2 x1 + a3 x12 + a4 x2 + a5 x22 + a6 x1 x2

Inputs

TypeNameDefaultDescription
Reala[6] Coefficients
Realx1 Independent variable
Realx2 Independent variable

Outputs

TypeNameDescription
RealyResult

Modelica definition

function biquadratic "Biquadratic function" input Real a[6] "Coefficients"; input Real x1 "Independent variable"; input Real x2 "Independent variable"; output Real y "Result"; algorithm y :=a[1] + x1*(a[2] + a[3]*x1) + x2*(a[4]+ a[5]*x2) + a[6]*x1*x2; end biquadratic;

Buildings.Utilities.Math.Functions.booleanReplicator

Replicates Boolean signals

Information

This function replicates the boolean input signal to an array of nout identical output signals.

Inputs

TypeNameDefaultDescription
Integernout1Number of outouts
Booleanu Boolean input signal

Outputs

TypeNameDescription
Booleany[nout]Boolean output signals

Modelica definition

function booleanReplicator "Replicates Boolean signals" input Integer nout=1 "Number of outouts"; input Boolean u "Boolean input signal"; output Boolean y[nout] "Boolean output signals"; algorithm y :=fill(u, nout); end booleanReplicator;

Buildings.Utilities.Math.Functions.cubicHermiteLinearExtrapolation

Interpolate using a cubic Hermite spline with linear extrapolation

Information

For x1 < x < x2, this function interpolates using cubic hermite spline. For x outside this interval, the function linearly extrapolates.

For how to use this function, see Buildings.Utilities.Math.Functions.Examples.CubicHermite.

Inputs

TypeNameDefaultDescription
Realx Abscissa value
Realx1 Lower abscissa value
Realx2 Upper abscissa value
Realy1 Lower ordinate value
Realy2 Upper ordinate value
Realy1d Lower gradient
Realy2d Upper gradient

Outputs

TypeNameDescription
RealyInterpolated ordinate value

Modelica definition

function cubicHermiteLinearExtrapolation "Interpolate using a cubic Hermite spline with linear extrapolation" input Real x "Abscissa value"; input Real x1 "Lower abscissa value"; input Real x2 "Upper abscissa value"; input Real y1 "Lower ordinate value"; input Real y2 "Upper ordinate value"; input Real y1d "Lower gradient"; input Real y2d "Upper gradient"; output Real y "Interpolated ordinate value"; algorithm if (x > x1 and x < x2) then y:=Modelica.Fluid.Utilities.cubicHermite( x=x, x1=x1, x2=x2, y1=y1, y2=y2, y1d=y1d, y2d=y2d); elseif x <= x1 then // linear extrapolation y:=y1 + (x - x1)*y1d; else y:=y2 + (x - x2)*y2d; end if; end cubicHermiteLinearExtrapolation;

Buildings.Utilities.Math.Functions.integerReplicator

Replicates integer signals

Information

This function replicates the integer input signal to an array of nout identical output signals.

Inputs

TypeNameDefaultDescription
Integernout Number of outputs
Integeru Integer input signal

Outputs

TypeNameDescription
Integery[nout]Integer output signals

Modelica definition

function integerReplicator "Replicates integer signals" input Integer nout "Number of outputs"; input Integer u "Integer input signal"; output Integer y[nout] "Integer output signals"; algorithm y :=fill(u, nout); end integerReplicator;

Buildings.Utilities.Math.Functions.inverseXRegularized

Function that approximates 1/x by a twice continuously differentiable function

Information

Function that approximates y=1 ⁄ x inside the interval -δ ≤ x ≤ δ. The approximation is twice continuously differentiable with a bounded derivative on the whole real line.

See the package Examples for the graph.

Inputs

TypeNameDefaultDescription
Realx Abscissa value
Realdelta Abscissa value below which approximation occurs

Outputs

TypeNameDescription
RealyFunction value

Modelica definition

function inverseXRegularized "Function that approximates 1/x by a twice continuously differentiable function" input Real x "Abscissa value"; input Real delta(min=0) "Abscissa value below which approximation occurs"; output Real y "Function value"; protected Real delta2 "Delta^2"; Real x2_d2 "=x^2/delta^2"; algorithm if (abs(x) > delta) then y := 1/x; else delta2 :=delta*delta; x2_d2 := x*x/delta2; y := x/delta2 + x*abs(x/delta2/delta*(2 - x2_d2*(3 - x2_d2))); end if; end inverseXRegularized;

Buildings.Utilities.Math.Functions.isMonotonic

Returns true if the argument is a monotonic sequence

Information

This function returns true if its argument is monotonic increasing or decreasing, and false otherwise. If strict=true, then strict monotonicity is tested, otherwise weak monotonicity is tested.

Inputs

TypeNameDefaultDescription
Realx[:] Sequence to be tested
BooleanstrictfalseSet to true to test for strict monotonicity

Outputs

TypeNameDescription
BooleanmonotonicTrue if x is monotonic increasing or decreasing

Modelica definition

function isMonotonic "Returns true if the argument is a monotonic sequence" input Real x[:] "Sequence to be tested"; input Boolean strict=false "Set to true to test for strict monotonicity"; output Boolean monotonic "True if x is monotonic increasing or decreasing"; protected Integer n=size(x, 1) "Number of data points"; algorithm if n == 1 then monotonic := true; else monotonic := true; if strict then if (x[1] >= x[n]) then for i in 1:n - 1 loop if (not x[i] > x[i + 1]) then monotonic := false; end if; end for; else for i in 1:n - 1 loop if (not x[i] < x[i + 1]) then monotonic := false; end if; end for; end if; else // not strict if (x[1] >= x[n]) then for i in 1:n - 1 loop if (not x[i] >= x[i + 1]) then monotonic := false; end if; end for; else for i in 1:n - 1 loop if (not x[i] <= x[i + 1]) then monotonic := false; end if; end for; end if; end if; // strict end if; end isMonotonic;

Buildings.Utilities.Math.Functions.polynomial

Polynomial function

Information

This function computes a polynomial of arbitrary order. The polynomial has the form

y = a1 + a2 x + a3 x2 + ...

Inputs

TypeNameDefaultDescription
Realx Independent variable
Reala[:] Coefficients

Outputs

TypeNameDescription
RealyResult

Modelica definition

function polynomial "Polynomial function" annotation(derivative=Buildings.Utilities.Math.Functions.BaseClasses.der_polynomial); input Real x "Independent variable"; input Real a[:] "Coefficients"; output Real y "Result"; protected parameter Integer n = size(a, 1)-1; Real xp[n+1] "Powers of x"; algorithm xp[1] :=1; for i in 1:n loop xp[i+1] :=xp[i]*x; end for; y :=a*xp; end polynomial;

Buildings.Utilities.Math.Functions.powerLinearized

Power function that is linearized below a user-defined threshold

Information

Function that approximates y=xn where 0 < n so that

For x < x0, this function replaces y=xn by a linear function that is continuously differentiable everywhere.

A typical use of this function is to replace T = T4(1/4) in a radiation balance to ensure that the function is defined everywhere. This can help solving the initialization problem when a solver may be far from a solution and hence T4 < 0.

See the package Examples for the graph.

Inputs

TypeNameDefaultDescription
Realx Abscissa value
Realn Exponent
Realx0 Abscissa value below which linearization occurs

Outputs

TypeNameDescription
RealyFunction value

Modelica definition

function powerLinearized "Power function that is linearized below a user-defined threshold" input Real x "Abscissa value"; input Real n "Exponent"; input Real x0 "Abscissa value below which linearization occurs"; output Real y "Function value"; algorithm if x > x0 then y := x^n; else y := x0^n * (1-n) + n * x0^(n-1) * x; end if; end powerLinearized;

Buildings.Utilities.Math.Functions.quadraticLinear

Function that is quadratic in first argument and linear in second argument

Information

This function computes

y = a1 + a2 x1 + a3 x12 + (a4 + a5 x1 + a6 x12) x2

Inputs

TypeNameDefaultDescription
Reala[6] Coefficients
Realx1 Independent variable for quadratic part
Realx2 Independent variable for linear part

Outputs

TypeNameDescription
RealyResult

Modelica definition

function quadraticLinear "Function that is quadratic in first argument and linear in second argument" input Real a[6] "Coefficients"; input Real x1 "Independent variable for quadratic part"; input Real x2 "Independent variable for linear part"; output Real y "Result"; protected Real x1Sq; algorithm x1Sq :=x1*x1; y :=a[1] + a[2]*x1 + a[3]*x1Sq + (a[4] + a[5]*x1 + a[6]*x1Sq)*x2; end quadraticLinear;

Buildings.Utilities.Math.Functions.regNonZeroPower

Power function, regularized near zero, but nonzero value for x=0

Information

Function that approximates y=|x|n where n > 0 so that

This function replaces y=|x|n in the interval -δ...+δ by a 4-th order polynomial that has the same function value and the first and second derivative at x=± δ.

A typical use of this function is to replace the function for the convective heat transfer coefficient for forced or free convection that is of the form h=c |dT|n for some constant c and exponent 0 ≤ n ≤ 1. By using this function, the original function that has an infinite derivative near zero and that takes on zero at the origin is replaced by a function with a bounded derivative and a non-zero value at the origin. Physically, the region -δ...+δ may be interpreted as the region where heat conduction dominates convection in the boundary layer.

See the package Examples for the graph.

Inputs

TypeNameDefaultDescription
Realx Abscissa value
Realn Exponent
Realdelta0.01Abscissa value where transition occurs

Outputs

TypeNameDescription
RealyFunction value

Modelica definition

function regNonZeroPower "Power function, regularized near zero, but nonzero value for x=0" annotation(derivative=BaseClasses.der_regNonZeroPower); input Real x "Abscissa value"; input Real n "Exponent"; input Real delta = 0.01 "Abscissa value where transition occurs"; output Real y "Function value"; protected Real a1; Real a3; Real a5; Real delta2; Real x2; Real y_d "=y(delta)"; Real yP_d "=dy(delta)/dx"; Real yPP_d "=d^2y(delta)/dx^2"; algorithm if abs(x) > delta then y := abs(x)^n; else delta2 :=delta*delta; x2 :=x*x; y_d :=delta^n; yP_d :=n*delta^(n - 1); yPP_d :=n*(n - 1)*delta^(n - 2); a1 := -(yP_d/delta - yPP_d)/delta2/8; a3 := (yPP_d - 12 * a1 * delta2)/2; a5 := (y_d - delta2 * (a3 + delta2 * a1)); y := a5 + x2 * (a3 + x2 * a1); assert(a5>0, "Delta is too small for this exponent."); end if; end regNonZeroPower;

Buildings.Utilities.Math.Functions.smoothExponential

Once continuously differentiable approximation to exp(-|x|) in interval |x| < delta

Information

Function to provide a once continuously differentiable approximation to exp(- |x| ) in the interval |x| < δ for some positive δ

Inputs

TypeNameDefaultDescription
Realx Input argument
Realdelta Transition point where approximation occurs

Outputs

TypeNameDescription
RealyOutput argument

Modelica definition

function smoothExponential "Once continuously differentiable approximation to exp(-|x|) in interval |x| < delta" input Real x "Input argument"; input Real delta "Transition point where approximation occurs"; output Real y "Output argument"; protected Real absX "Absolute value of x"; Real a2 "Coefficient for approximating function"; Real a3 "Coefficient for approximating function"; Real e; Real d2; Real x2; algorithm absX :=abs(x); if absX > delta then y := exp(-absX); else d2 := delta*delta; e := exp(-delta); a2 := (delta*e-4*(1-e))/2/d2; a3 := (e-1-a2*d2)/d2/d2; x2 := x*x; y := 1+x2*(a2+x2*a3); end if; end smoothExponential;

Buildings.Utilities.Math.Functions.smoothHeaviside

Once continuously differentiable approximation to the Heaviside function

Information

Once Lipschitz continuously differentiable approximation to the Heaviside(.,.) function.

Inputs

TypeNameDefaultDescription
Realx Argument
Realdelta Parameter used for scaling

Outputs

TypeNameDescription
RealyResult

Modelica definition

function smoothHeaviside "Once continuously differentiable approximation to the Heaviside function" input Real x "Argument"; input Real delta "Parameter used for scaling"; output Real y "Result"; algorithm y := Buildings.Utilities.Math.Functions.spliceFunction(1, 0, x, delta); end smoothHeaviside;

Buildings.Utilities.Math.Functions.smoothLimit

Once continuously differentiable approximation to the limit function

Information

Once continuously differentiable approximation to the limit(.,.) function. The output is bounded to be in [l, u].

Note that the limit need not be respected, such as illustrated in Buildings.Utilities.Math.Examples.SmoothMin.

Inputs

TypeNameDefaultDescription
Realx Variable
Reall Low limit
Realu Upper limit
RealdeltaX Width of transition interval

Outputs

TypeNameDescription
RealyResult

Modelica definition

function smoothLimit "Once continuously differentiable approximation to the limit function" input Real x "Variable"; input Real l "Low limit"; input Real u "Upper limit"; input Real deltaX "Width of transition interval"; output Real y "Result"; protected Real cor; algorithm cor :=deltaX/10; y := Buildings.Utilities.Math.Functions.smoothMax(x,l+deltaX,cor); y := Buildings.Utilities.Math.Functions.smoothMin(y,u-deltaX,cor); end smoothLimit;

Buildings.Utilities.Math.Functions.smoothMax

Once continuously differentiable approximation to the maximum function

Information

Once continuously differentiable approximation to the max(.,.) function.

Note that the maximum need not be respected, such as illustrated in Buildings.Utilities.Math.Examples.SmoothMin.

Inputs

TypeNameDefaultDescription
Realx1 First argument
Realx2 Second argument
RealdeltaX Width of transition interval

Outputs

TypeNameDescription
RealyResult

Modelica definition

function smoothMax "Once continuously differentiable approximation to the maximum function" input Real x1 "First argument"; input Real x2 "Second argument"; input Real deltaX "Width of transition interval"; output Real y "Result"; algorithm y := Buildings.Utilities.Math.Functions.spliceFunction( pos=x1, neg=x2, x=x1-x2, deltax=deltaX); end smoothMax;

Buildings.Utilities.Math.Functions.smoothMin

Once continuously differentiable approximation to the minimum function

Information

Once continuously differentiable approximation to the min(.,.) function.

Note that the minimum need not be respected, such as illustrated in Buildings.Utilities.Math.Examples.SmoothMin.

Inputs

TypeNameDefaultDescription
Realx1 First argument
Realx2 Second argument
RealdeltaX Width of transition interval

Outputs

TypeNameDescription
RealyResult

Modelica definition

function smoothMin "Once continuously differentiable approximation to the minimum function" input Real x1 "First argument"; input Real x2 "Second argument"; input Real deltaX "Width of transition interval"; output Real y "Result"; algorithm y := Buildings.Utilities.Math.Functions.spliceFunction( pos=x1, neg=x2, x=x2-x1, deltax=deltaX); end smoothMin;

Buildings.Utilities.Math.Functions.spliceFunction

Information

Function to provide a once continuously differentialbe transition between to arguments.

The function is adapted from Modelica.Media.Air.MoistAir.Utilities.spliceFunction and provided here for easier accessability to model developers.

Inputs

TypeNameDefaultDescription
Realpos Argument of x > 0
Realneg Argument of x < 0
Realx Independent value
Realdeltax Half width of transition interval

Outputs

TypeNameDescription
RealoutSmoothed value

Modelica definition

function spliceFunction annotation(derivative=BaseClasses.der_spliceFunction); input Real pos "Argument of x > 0"; input Real neg "Argument of x < 0"; input Real x "Independent value"; input Real deltax "Half width of transition interval"; output Real out "Smoothed value"; protected Real scaledX1; Real y; constant Real asin1 = Modelica.Math.asin(1); algorithm scaledX1 := x/deltax; if scaledX1 <= -0.999999999 then out := neg; elseif scaledX1 >= 0.999999999 then out := pos; else y := (Modelica.Math.tanh(Modelica.Math.tan(scaledX1*asin1)) + 1)/2; out := pos*y + (1 - y)*neg; end if; end spliceFunction;

Buildings.Utilities.Math.Functions.splineDerivatives

Function to compute the derivatives for cubic hermite spline interpolation

Information

This function computes the derivatives at the support points xi that can be used as input for evaluating a cubic hermite spline. If ensureMonotonicity=true, then the support points yi need to be monotone increasing (or increasing), and the computed derivatives di are such that the cubic hermite is monotone increasing (or decreasing). The algorithm to ensure monotonicity is based on the method described in Fritsch and Carlson (1980) for ρ = ρ2.

This function is typically used with Buildings.Utilities.Math.Functions.cubicHermiteLinearExtrapolation which is used to evaluate the cubic spline. Because in many applications, the shape of the spline depends on parameters, this function has been implemented in such a way that all derivatives can be computed at once and then stored for use during the time stepping, in which the above function may be called.

References

F.N. Fritsch and R.E. Carlson, Monotone piecewise cubic interpolation. SIAM J. Numer. Anal., 17 (1980), pp. 238?246.

Inputs

TypeNameDefaultDescription
Realx[:] Support point, strict monotone increasing
Realy[size(x, 1)] Function values at x
BooleanensureMonotonicityisMonotonic(y, strict=false)Set to true to ensure monotonicity of the cubic hermite

Outputs

TypeNameDescription
Reald[size(x, 1)]Derivative at the support points

Modelica definition

function splineDerivatives "Function to compute the derivatives for cubic hermite spline interpolation" input Real x[:] "Support point, strict monotone increasing"; input Real y[size(x, 1)] "Function values at x"; input Boolean ensureMonotonicity=isMonotonic(y, strict=false) "Set to true to ensure monotonicity of the cubic hermite"; output Real d[size(x, 1)] "Derivative at the support points"; protected Integer n=size(x, 1) "Number of data points"; Real delta[n - 1] "Slope of secant line between data points"; Real alpha "Coefficient to ensure monotonicity"; Real beta "Coefficient to ensure monotonicity"; Real tau "Coefficient to ensure monotonicity"; algorithm if (n>1) then assert(x[1] < x[n], "x must be strictly increasing. Received x[1] = " + String(x[1]) + " x[" + String(n) + "] = " + String(x[n])); // Check data assert(isMonotonic(x, strict=true), "x-values must be strictly monontone increasing or decreasing."); if ensureMonotonicity then assert(isMonotonic(y, strict=false), "If ensureMonotonicity=true, y-values must be monontone increasing or decreasing."); end if; end if; // Compute derivatives at the support points if n == 1 then // only one data point d[1] :=0; elseif n == 2 then // linear function d[1] := (y[2] - y[1])/(x[2] - x[1]); d[2] := d[1]; else // Slopes of the secant lines between i and i+1 for i in 1:n - 1 loop delta[i] := (y[i + 1] - y[i])/(x[i + 1] - x[i]); end for; // Initial values for tangents at the support points. // End points use one-sided derivatives d[1] := delta[1]; d[n] := delta[n - 1]; for i in 2:n - 1 loop d[i] := (delta[i - 1] + delta[i])/2; end for; end if; // Ensure monotonicity if n > 2 and ensureMonotonicity then for i in 1:n - 1 loop if (abs(delta[i]) < Modelica.Constants.small) then d[i] := 0; d[i + 1] := 0; else alpha := d[i]/delta[i]; beta := d[i + 1]/delta[i]; // Constrain derivative to ensure monotonicity in this interval if (alpha^2 + beta^2) > 9 then tau := 3/(alpha^2 + beta^2)^(1/2); d[i] := delta[i]*alpha*tau; d[i + 1] := delta[i]*beta*tau; end if; end if; end for; end if; end splineDerivatives;

Buildings.Utilities.Math.Functions.trapezoidalIntegration

Integration using the trapezoidal rule

Information

This function computes a definite integral using the trapezoidal rule.

Inputs

TypeNameDefaultDescription
IntegerN Number of integrand points
Realf[:] Integrands
RealdeltaX Width of interval for Trapezoidal integration

Outputs

TypeNameDescription
RealresultResult

Modelica definition

function trapezoidalIntegration "Integration using the trapezoidal rule" input Integer N "Number of integrand points"; input Real[:] f "Integrands"; input Real deltaX "Width of interval for Trapezoidal integration"; output Real result "Result"; algorithm assert(N >= 2, "N must be no less than 2."); result := 0; for i in 1:N loop result := result + f[i]; end for; result := 2*result; result := result - f[1] - f[N]; result := result*deltaX/2; end trapezoidalIntegration;

Automatically generated Mon May 4 10:27:20 2015.