Buildings.Controls.OBC.CDL.Types
Package with type definitions
Information
This package contains type definitions.
Package Content
Name | Description |
---|---|
Extrapolation | Enumeration defining the extrapolation of time table interpolation |
SimpleController | Enumeration defining P, PI, PD, or PID simple controller type |
Smoothness | Enumeration defining the smoothness of table interpolation |
ZeroTime | Use this to set the date corresponding to time = 0 |
Types and constants
type Extrapolation = enumeration( HoldLastPoint "Hold the first/last table point outside of the table scope", LastTwoPoints "Extrapolate by using the derivative at the first/last table points outside of the table scope", Periodic "Repeat the table scope periodically") "Enumeration defining the extrapolation of time table interpolation";
type SimpleController = enumeration( P "P controller", PI "PI controller", PD "PD controller", PID "PID controller") "Enumeration defining P, PI, PD, or PID simple controller type";
type Smoothness = enumeration( LinearSegments "Table points are linearly interpolated", ConstantSegments "Table points are not interpolated, but the previous tabulated value is returned") "Enumeration defining the smoothness of table interpolation";
type ZeroTime = enumeration( UnixTimeStamp "Thu, 01 Jan 1970 00:00:00 local time", UnixTimeStampGMT "Thu, 01 Jan 1970 00:00:00 GMT", Custom "User specified local time", NY2010 "New year 2010, 00:00:00 local time", NY2011 "New year 2011, 00:00:00 local time", NY2012 "New year 2012, 00:00:00 local time", NY2013 "New year 2013, 00:00:00 local time", NY2014 "New year 2014, 00:00:00 local time", NY2015 "New year 2015, 00:00:00 local time", NY2016 "New year 2016, 00:00:00 local time", NY2017 "New year 2017, 00:00:00 local time", NY2018 "New year 2018, 00:00:00 local time", NY2019 "New year 2019, 00:00:00 local time", NY2020 "New year 2020, 00:00:00 local time", NY2021 "New year 2021, 00:00:00 local time", NY2022 "New year 2022, 00:00:00 local time", NY2023 "New year 2023, 00:00:00 local time", NY2024 "New year 2024, 00:00:00 local time", NY2025 "New year 2025, 00:00:00 local time", NY2026 "New year 2026, 00:00:00 local time", NY2027 "New year 2027, 00:00:00 local time", NY2028 "New year 2028, 00:00:00 local time", NY2029 "New year 2029, 00:00:00 local time", NY2030 "New year 2030, 00:00:00 local time", NY2031 "New year 2031, 00:00:00 local time", NY2032 "New year 2032, 00:00:00 local time", NY2033 "New year 2033, 00:00:00 local time", NY2034 "New year 2034, 00:00:00 local time", NY2035 "New year 2035, 00:00:00 local time", NY2036 "New year 2036, 00:00:00 local time", NY2037 "New year 2037, 00:00:00 local time", NY2038 "New year 2038, 00:00:00 local time", NY2039 "New year 2039, 00:00:00 local time", NY2040 "New year 2040, 00:00:00 local time", NY2041 "New year 2041, 00:00:00 local time", NY2042 "New year 2042, 00:00:00 local time", NY2043 "New year 2043, 00:00:00 local time", NY2044 "New year 2044, 00:00:00 local time", NY2045 "New year 2045, 00:00:00 local time", NY2046 "New year 2046, 00:00:00 local time", NY2047 "New year 2047, 00:00:00 local time", NY2048 "New year 2048, 00:00:00 local time", NY2049 "New year 2049, 00:00:00 local time", NY2050 "New year 2050, 00:00:00 local time") "Use this to set the date corresponding to time = 0";
Buildings.Controls.OBC.CDL.Types.Extrapolation
Enumeration defining the extrapolation of time table interpolation
Information
Enumeration for the type of extrapolation that is used when reading data from a table. The possible values are:
Enumeration | Description |
---|---|
HoldLastPoint |
Hold the first or last point outside of the table scope. |
LastTwoPoints |
Extrapolate by using the derivative at the first or last table points outside of the table scope. |
Periodic |
Repeat the table scope periodically. |
Modelica definition
Buildings.Controls.OBC.CDL.Types.SimpleController
Enumeration defining P, PI, PD, or PID simple controller type
Information
Enumeration to define the type of the controller. Possible values are:
Enumeration | Description |
---|---|
P |
Controller with proportional term. |
PI |
Controller with proportional and integral terms. |
PD |
Controller with proportional and derivative term. |
PID |
Controller with proportional, integral and derivative terms. |
Modelica definition
Buildings.Controls.OBC.CDL.Types.Smoothness
Enumeration defining the smoothness of table interpolation
Information
Enumeration for the type of smoothness that is used when interpolating data from a table. The possible values are:
Enumeration | Description |
---|---|
LinearSegments |
Linearly interpolate table points. |
ConstantSegments |
Do not interpolate, but rather use the previously tabulated value. |
Modelica definition
Buildings.Controls.OBC.CDL.Types.ZeroTime
Use this to set the date corresponding to time = 0
Information
Type for choosing how to set the reference time in Buildings.Controls.OBC.CDL.Reals.Sources.CalendarTime.
For example, CDL.Types.TimeReference.NY2016
means that if model time is 0, it is
January 1, 2016, 0:00:00 local time.