partial model PartialTestModel "Partial model that is used to build the test cases" package MediumA = Buildings.Media.GasesPTDecoupled.MoistAirUnsaturated "Medium model"; parameter Integer nConExt "Number of exterior constructions that do not have a window"; parameter Integer nConExtWin "Number of exterior constructions that do have a window"; parameter Integer nConPar "Number of partition constructions"; parameter Integer nConBou "Number of surface that are connected to constructions that are modeled inside the room"; parameter Integer nSurBou "Number of surface that are connected to the room air volume"; MixedAir roo( redeclare package Medium = MediumA, final nConExt=nConExt, final nConExtWin=nConExtWin, final nConPar=nConPar, final nConBou=nConBou, final nSurBou=nSurBou, AFlo=20, hRoo=2.7, linearizeRadiation = true, lat=0.73268921998722) "Room model"; inner Modelica.Fluid.System system; parameter HeatTransfer.Data.OpaqueConstructions.Insulation100Concrete200 matLayExt "Construction material for exterior walls"; parameter HeatTransfer.Data.OpaqueConstructions.Brick120 matLayPar "Construction material for partition walls"; Modelica.Blocks.Sources.Constant qConGai_flow(k=0) "Convective heat gain"; Modelica.Blocks.Sources.Constant qRadGai_flow(k=0) "Radiative heat gain"; Modelica.Blocks.Routing.Multiplex3 multiplex3_1; Modelica.Blocks.Sources.Constant qLatGai_flow(k=0) "Latent heat gain"; BoundaryConditions.WeatherData.ReaderTMY3 weaDat(filNam="modelica://Buildings/Resources/weatherdata/USA_IL_Chicago-OHare.Intl.AP.725300_TMY3.mos"); parameter HeatTransfer.Data.GlazingSystems.DoubleClearAir13Clear glaSys(UFra=2, shade=Buildings.HeatTransfer.Data.Shades.Gray(), haveExteriorShade=false, haveInteriorShade=false) "Data record for the glazing system"; equation connect(qRadGai_flow.y, multiplex3_1.u1[1]); connect(qConGai_flow.y, multiplex3_1.u2[1]); connect(qLatGai_flow.y, multiplex3_1.u3[1]); connect(multiplex3_1.y, roo.qGai_flow); connect(weaDat.weaBus, roo.weaBus); end PartialTestModel;