LBL logo

Buildings.Rooms.BaseClasses.Examples

Collection of models that illustrate model use and test models

Information

This package contains examples for the use of models that can be found in Buildings.Rooms.BaseClasses.

Extends from Modelica.Icons.ExamplesPackage (Icon for packages containing runnable examples).

Package Content

NameDescription
Buildings.Rooms.BaseClasses.Examples.AirHeatMassBalance AirHeatMassBalance Test model for air heat and mass balance
Buildings.Rooms.BaseClasses.Examples.HeatGain HeatGain Test model for the HeatGain model
Buildings.Rooms.BaseClasses.Examples.InfraredRadiationGainDistribution InfraredRadiationGainDistribution Test model for infrared radiation gain
Buildings.Rooms.BaseClasses.Examples.InfraredRadiationExchange InfraredRadiationExchange Test model for infrared radiation exchange
Buildings.Rooms.BaseClasses.Examples.RadiationTemperature RadiationTemperature Test model for the radiation temperature
Buildings.Rooms.BaseClasses.Examples.BaseClasses BaseClasses Package with base classes for Buildings.Rooms.BaseClasses.Examples

Buildings.Rooms.BaseClasses.Examples.AirHeatMassBalance Buildings.Rooms.BaseClasses.Examples.AirHeatMassBalance

Test model for air heat and mass balance

Buildings.Rooms.BaseClasses.Examples.AirHeatMassBalance

Information

Extends from Modelica.Icons.Example (Icon for runnable examples), Buildings.Rooms.BaseClasses.Examples.BaseClasses.PartialInfraredRadiation (Partial model to test infrared radiation inside the room).

Parameters

TypeNameDefaultDescription
ParameterConstructiondatConExt[NConExt]datConExt(each A=1)Data for exterior construction
ParameterConstructionWithWindowdatConExtWin[NConExtWin]datConExtWin(each A=1, each ...Data for exterior construction with window
ParameterConstructiondatConPar[NConPar]datConPar(each A=1)Data for partition construction
ParameterConstructiondatConBou[NConBou]datConBou(each A=1)Data for construction boundary
GenericsurBou[NSurBou]surBou(each A=1)Record for data of surfaces whose heat conduction is modeled outside of this room
Exterior constructions
IntegernConExt1Number of exterior constructions
IntegernConExtWin0Number of window constructions
Partition constructions
IntegernConPar0Number of partition constructions
Boundary constructions
IntegernConBou0Number of constructions that have their outside surface exposed to the boundary of this room
IntegernSurBou0Number of surface heat transfer models that connect to constructions that are modeled outside of this room

Modelica definition

model AirHeatMassBalance "Test model for air heat and mass balance"
  extends Modelica.Icons.Example;
  extends Buildings.Rooms.BaseClasses.Examples.BaseClasses.PartialInfraredRadiation
    (
    nConExt=1, nConExtWin=0, nConBou=0, nSurBou=0, nConPar=0);

  Buildings.Rooms.BaseClasses.AirHeatMassBalanceMixed air(
    nConExt=nConExt,
    nConExtWin=nConExtWin,
    nConPar=nConPar,
    nConBou=nConBou,
    nSurBou=nSurBou,
    final datConExt=datConExt,
    final datConExtWin=datConExtWin,
    final datConPar=datConPar,
    final datConBou=datConBou,
    final surBou=surBou,
    redeclare package Medium = Buildings.Media.IdealGases.SimpleAir,
    m_flow_nominal=0.1,
    V=10,
    conMod=Buildings.HeatTransfer.Types.InteriorConvection.Fixed,
    hFixed=3,
    haveShade=datConExtWin[1].glaSys.haveShade) 
    "Convective heat balance of air";
protected 
  Modelica.Thermal.HeatTransfer.Components.ThermalConductor conGlaSha[
    NConExtWin](each G=100) "Heat conductor";
  Buildings.HeatTransfer.Sources.FixedTemperature bouConGlaSha[NConExtWin](
      each T=293.15) "Boundary condition";
  Modelica.Thermal.HeatTransfer.Components.ThermalConductor conGlaUns[
    NConExtWin](each G=100) "Heat conductor";
  Buildings.HeatTransfer.Sources.FixedTemperature bouConGlaUns[NConExtWin](
      each T=293.15) "Boundary condition";
public 
  Modelica.Thermal.HeatTransfer.Sources.FixedHeatFlow QCon_flow(Q_flow=0) 
    "Convective heat input";
  Modelica.Blocks.Sources.Constant uSha[NConExtWin](each k=0) 
    "Shade control signal";
  Modelica.Blocks.Sources.Constant QRadAbs_flow[NConExtWin](each k=0) 
    "Radiation absorbed by shade";
  inner Modelica.Fluid.System system;
equation 
  connect(conConExt.port_a, air.conExt);
  connect(conConExtWin.port_a, air.conExtWin);
  connect(conConExtWinFra.port_a, air.conExtWinFra);
  connect(conConPar_a.port_a, air.conPar_a);
  connect(conConPar_b.port_a, air.conPar_b);
  connect(conConBou.port_a, air.conBou);
  connect(conSurBou.port_a, air.conSurBou);
  connect(bouConGlaUns.port, conGlaUns.port_b);
  connect(conGlaUns.port_a, air.glaUns);
  connect(bouConGlaSha.port, conGlaSha.port_b);
  connect(conGlaSha.port_a, air.glaSha);
  connect(air.heaPorAir, QCon_flow.port);
  connect(uSha.y, air.uSha);
  connect(QRadAbs_flow.y, air.QRadAbs_flow);
end AirHeatMassBalance;

Buildings.Rooms.BaseClasses.Examples.HeatGain Buildings.Rooms.BaseClasses.Examples.HeatGain

Test model for the HeatGain model

Buildings.Rooms.BaseClasses.Examples.HeatGain

Information

Extends from Modelica.Icons.Example (Icon for runnable examples).

Parameters

TypeNameDefaultDescription
AreaAFlo50Floor area [m2]

Modelica definition

model HeatGain "Test model for the HeatGain model"
  extends Modelica.Icons.Example;

  package MediumA = Buildings.Media.GasesPTDecoupled.MoistAirUnsaturated 
    "Medium model";

  Buildings.Rooms.BaseClasses.HeatGain heatGain(redeclare package Medium =
        MediumA, AFlo=AFlo);
  Modelica.Blocks.Sources.Constant qConGai_flow(k=10) "Convective heat gain";
  Modelica.Blocks.Sources.Constant qRadGai_flow1(k=0) "Radiative heat gain";
  Modelica.Blocks.Routing.Multiplex3 multiplex3_1;
  Modelica.Blocks.Sources.Constant qLatGai_flow(k=10) "Latent heat gain";
  Buildings.Fluid.Sensors.SensibleEnthalpyFlowRate QSen_flow(redeclare package
      Medium = MediumA, m_flow_nominal=2E-4,
    tau=0);
  Buildings.Fluid.Sensors.LatentEnthalpyFlowRate QLat_flow(redeclare package
      Medium = MediumA, m_flow_nominal=2E-4,
    tau=0);
  Buildings.Fluid.Sources.Boundary_pT boundary(          redeclare package
      Medium = MediumA, nPorts=1);
  inner Modelica.Fluid.System system;
  Buildings.Utilities.Diagnostics.AssertEquality assertEquality;
  parameter Modelica.SIunits.Area AFlo=50 "Floor area";
  Modelica.Blocks.Math.Gain gainLat(k=AFlo);
  Buildings.Utilities.Diagnostics.AssertEquality assertEquality1;
  Buildings.Fluid.MixingVolumes.MixingVolume vol(
    nPorts=2,
    redeclare package Medium = MediumA,
    V=AFlo*2.5,
    m_flow_nominal=1E-3);
  Modelica.Blocks.Sources.Constant qSenAir_flow(k=0) 
    "Sensible heat flow of air stream (must be zero)";
equation 
  connect(qRadGai_flow1.y,multiplex3_1. u1[1]);
  connect(qConGai_flow.y,multiplex3_1. u2[1]);
  connect(qLatGai_flow.y, multiplex3_1.u3[1]);
  connect(multiplex3_1.y, heatGain.qGai_flow);
  connect(heatGain.QLat_flow, QSen_flow.port_a);
  connect(QSen_flow.port_b, QLat_flow.port_a);
  connect(assertEquality.u2, QSen_flow.H_flow);
  connect(assertEquality1.u2, QLat_flow.H_flow);
  connect(gainLat.y, assertEquality1.u1);
  connect(qLatGai_flow.y, gainLat.u);
  connect(boundary.ports[1], vol.ports[1]);
  connect(vol.ports[2], QLat_flow.port_b);
  connect(qSenAir_flow.y, assertEquality.u1);
  connect(heatGain.QCon_flow, vol.heatPort);
end HeatGain;

Buildings.Rooms.BaseClasses.Examples.InfraredRadiationGainDistribution Buildings.Rooms.BaseClasses.Examples.InfraredRadiationGainDistribution

Test model for infrared radiation gain

Buildings.Rooms.BaseClasses.Examples.InfraredRadiationGainDistribution

Information

Extends from Modelica.Icons.Example (Icon for runnable examples), Buildings.Rooms.BaseClasses.Examples.BaseClasses.PartialInfraredRadiation (Partial model to test infrared radiation inside the room).

Parameters

TypeNameDefaultDescription
ParameterConstructiondatConExt[NConExt]datConExt(each A=1)Data for exterior construction
ParameterConstructionWithWindowdatConExtWin[NConExtWin]datConExtWin(each A=1, each ...Data for exterior construction with window
ParameterConstructiondatConPar[NConPar]datConPar(each A=1)Data for partition construction
ParameterConstructiondatConBou[NConBou]datConBou(each A=1)Data for construction boundary
GenericsurBou[NSurBou]surBou(each A=1)Record for data of surfaces whose heat conduction is modeled outside of this room
Exterior constructions
IntegernConExt1Number of exterior constructions
IntegernConExtWin1Number of window constructions
Partition constructions
IntegernConPar1Number of partition constructions
Boundary constructions
IntegernConBou1Number of constructions that have their outside surface exposed to the boundary of this room
IntegernSurBou1Number of surface heat transfer models that connect to constructions that are modeled outside of this room

Modelica definition

model InfraredRadiationGainDistribution 
  "Test model for infrared radiation gain"
  extends Modelica.Icons.Example;
  extends Buildings.Rooms.BaseClasses.Examples.BaseClasses.PartialInfraredRadiation;
  Buildings.Rooms.BaseClasses.InfraredRadiationGainDistribution irRadGai(
    nConExt=nConExt,
    nConExtWin=nConExtWin,
    nConPar=nConPar,
    nConBou=nConBou,
    nSurBou=nSurBou,
    final datConExt=datConExt,
    final datConExtWin=datConExtWin,
    final datConPar=datConPar,
    final datConBou=datConBou,
    final surBou=surBou,
    haveShade=true) 
    "Distribution for infrared radiative heat gains (e.g., due to equipment and people)";
protected 
  Modelica.Blocks.Sources.Constant QRad_flow(k=1) "Radiative heat gain";
  Modelica.Blocks.Sources.Constant zer[NConExtWin](each k=0) 
    "Outputs zero. This block is needed to send a signal to the shading connector if no window is used in the room model";
    
equation 
  connect(conConExt.port_a, irRadGai.conExt);
  connect(conConExtWin.port_a, irRadGai.conExtWin);
  connect(conConExtWinFra.port_a, irRadGai.conExtWinFra);
  connect(conConPar_a.port_a, irRadGai.conPar_a);
  connect(conConPar_b.port_a, irRadGai.conPar_b);
  connect(conConBou.port_a, irRadGai.conBou);
  connect(conSurBou.port_a, irRadGai.conSurBou);
  connect(QRad_flow.y, irRadGai.Q_flow);
  connect(zer.y, irRadGai.uSha);
end InfraredRadiationGainDistribution;

Buildings.Rooms.BaseClasses.Examples.InfraredRadiationExchange Buildings.Rooms.BaseClasses.Examples.InfraredRadiationExchange

Test model for infrared radiation exchange

Buildings.Rooms.BaseClasses.Examples.InfraredRadiationExchange

Information

Extends from Modelica.Icons.Example (Icon for runnable examples), Buildings.Rooms.BaseClasses.Examples.BaseClasses.PartialInfraredRadiation (Partial model to test infrared radiation inside the room).

Parameters

TypeNameDefaultDescription
ParameterConstructiondatConExt[NConExt]datConExt(each A=1)Data for exterior construction
ParameterConstructionWithWindowdatConExtWin[NConExtWin]datConExtWin(each A=1, each ...Data for exterior construction with window
ParameterConstructiondatConPar[NConPar]datConPar(each A=1)Data for partition construction
ParameterConstructiondatConBou[NConBou]datConBou(each A=1)Data for construction boundary
GenericsurBou[NSurBou]surBou(each A=1)Record for data of surfaces whose heat conduction is modeled outside of this room
Exterior constructions
IntegernConExt1Number of exterior constructions
IntegernConExtWin1Number of window constructions
Partition constructions
IntegernConPar1Number of partition constructions
Boundary constructions
IntegernConBou1Number of constructions that have their outside surface exposed to the boundary of this room
IntegernSurBou1Number of surface heat transfer models that connect to constructions that are modeled outside of this room

Modelica definition

model InfraredRadiationExchange 
  "Test model for infrared radiation exchange"
  extends Modelica.Icons.Example;
  extends Buildings.Rooms.BaseClasses.Examples.BaseClasses.PartialInfraredRadiation;
  Buildings.Rooms.BaseClasses.InfraredRadiationExchange irRadExc(
    nConExt=nConExt,
    nConExtWin=nConExtWin,
    nConPar=nConPar,
    nConBou=nConBou,
    nSurBou=nSurBou,
    final datConExt=datConExt,
    final datConExtWin=datConExtWin,
    final datConPar=datConPar,
    final datConBou=datConBou,
    final surBou=surBou,
    linearizeRadiation=true) 
    "Distribution for infrared radiative heat transfer";
  Buildings.HeatTransfer.Radiosity.Constant radSou[NConExtWin](each k=187) 
    "Radiosity source for window";
equation 
  connect(conConExt.port_a, irRadExc.conExt);
  connect(conConExtWin.port_a, irRadExc.conExtWin);
  connect(conConExtWinFra.port_a, irRadExc.conExtWinFra);
  connect(conConPar_a.port_a, irRadExc.conPar_a);
  connect(conConPar_b.port_a, irRadExc.conPar_b);
  connect(conConBou.port_a, irRadExc.conBou);
  connect(conSurBou.port_a, irRadExc.conSurBou);
  connect(radSou.JOut, irRadExc.JInConExtWin);
end InfraredRadiationExchange;

Buildings.Rooms.BaseClasses.Examples.RadiationTemperature Buildings.Rooms.BaseClasses.Examples.RadiationTemperature

Test model for the radiation temperature

Buildings.Rooms.BaseClasses.Examples.RadiationTemperature

Information

Extends from Modelica.Icons.Example (Icon for runnable examples), Buildings.Rooms.BaseClasses.Examples.BaseClasses.PartialInfraredRadiation (Partial model to test infrared radiation inside the room).

Parameters

TypeNameDefaultDescription
ParameterConstructiondatConExt[NConExt]datConExt(each A=1)Data for exterior construction
ParameterConstructionWithWindowdatConExtWin[NConExtWin]datConExtWin(each A=1, each ...Data for exterior construction with window
ParameterConstructiondatConPar[NConPar]datConPar(each A=1)Data for partition construction
ParameterConstructiondatConBou[NConBou]datConBou(each A=1)Data for construction boundary
GenericsurBou[NSurBou]surBou(each A=1)Record for data of surfaces whose heat conduction is modeled outside of this room
Exterior constructions
IntegernConExt1Number of exterior constructions
IntegernConExtWin1Number of window constructions
Partition constructions
IntegernConPar1Number of partition constructions
Boundary constructions
IntegernConBou1Number of constructions that have their outside surface exposed to the boundary of this room
IntegernSurBou1Number of surface heat transfer models that connect to constructions that are modeled outside of this room

Modelica definition

model RadiationTemperature "Test model for the radiation temperature"
  extends Modelica.Icons.Example;
  extends Buildings.Rooms.BaseClasses.Examples.BaseClasses.PartialInfraredRadiation
    (
    bouConExt(each T=289.15),
    bouConExtWin(each T=290.15),
    bouConExtWinFra(each T=285.15),
    bouConPar_b(each T=291.15),
    bouConBou(each T=295.15),
    bouSurBou(each T=296.15));

  Buildings.Rooms.BaseClasses.RadiationTemperature radTem(
    nConExt=nConExt,
    nConExtWin=nConExtWin,
    nConPar=nConPar,
    nConBou=nConBou,
    nSurBou=nSurBou,
    final datConExt=datConExt,
    final datConExtWin=datConExtWin,
    final datConPar=datConPar,
    final datConBou=datConBou,
    final surBou=surBou,
    haveShade=true) "Radiative temperature";

  Modelica.Blocks.Sources.Constant uSha[NConExtWin](each k=0.5) 
    "Shade control signal";
protected 
  Modelica.Thermal.HeatTransfer.Components.ThermalConductor conGlaUns[
    NConExtWin](each G=100) "Heat conductor";
  Modelica.Thermal.HeatTransfer.Components.ThermalConductor conGlaSha[
    NConExtWin](each G=100) "Heat conductor";
  Modelica.Thermal.HeatTransfer.Components.ThermalConductor conSha[NConExtWin](
      each G=100) "Heat conductor";
  Buildings.HeatTransfer.Sources.FixedTemperature bouGlaUns[NConExtWin](each T=
        288.15) "Boundary condition";
  Buildings.HeatTransfer.Sources.FixedTemperature bouGlaSha[NConExtWin](each T=
        284.15) "Boundary condition";
  Buildings.HeatTransfer.Sources.FixedTemperature bouSha[NConExtWin](
      each T=293.15) "Boundary condition";
equation 
  connect(conConExt.port_a, radTem.conExt);
  connect(conConExtWin.port_a, radTem.conExtWin);
  connect(conConExtWinFra.port_a, radTem.conExtWinFra);
  connect(conConPar_a.port_a, radTem.conPar_a);
  connect(conConPar_b.port_a, radTem.conPar_b);
  connect(conConBou.port_a, radTem.conBou);
  connect(conSurBou.port_a, radTem.conSurBou);

  connect(uSha.y, radTem.uSha);
  connect(bouGlaUns.port, conGlaUns.port_b);
  connect(bouGlaSha.port, conGlaSha.port_b);
  connect(bouSha.port, conSha.port_b);
  connect(radTem.glaUns, conGlaUns.port_a);
  connect(radTem.glaSha, conGlaSha.port_a);
  connect(radTem.sha, conSha.port_a);
end RadiationTemperature;

Automatically generated Fri Dec 13 11:39:40 2013.