Buildings.HeatTransfer.Convection.Examples

Home > Modelica

Buildings.HeatTransfer.Convection.Examples

Collection of models that illustrate model use and test models

Information

This package contains examples for the use of models that can be found in Buildings.HeatTransfer.Convection.

Extends from Modelica.Icons.ExamplesPackage (Icon for packages containing runnable examples).

Package Content

Name Description

Exterior Test model for exterior heat transfer coefficients

Interior Test model for convective heat transfer coefficients

Name	Description
Exterior	Test model for exterior heat transfer coefficients
Interior	Test model for convective heat transfer coefficients

Buildings.HeatTransfer.Convection.Examples.Exterior

Test model for exterior heat transfer coefficients

Buildings.HeatTransfer.Convection.Examples.Exterior

Information

This example tests the convective heat transfer models for exterior surfaces. From t=0...3600 seconds, the wind traverses from North to West to South to East and back to North. The plot shows the influence of the wind direction on the forced convection coefficient for wall surfaces that face North, West, East and South.

Extends from Modelica.Icons.Example (Icon for runnable examples).

Modelica definition

model Exterior "Test model for exterior heat transfer coefficients"
  import Buildings;
  extends Modelica.Icons.Example;
  Modelica.Blocks.Sources.Constant T1(k=290.15);
  Buildings.HeatTransfer.Sources.FixedTemperature TB(T=293.15);
  Buildings.HeatTransfer.Convection.Exterior nor(
    A=1,
    azi=Buildings.HeatTransfer.Types.Azimuth.N,
    til=Buildings.HeatTransfer.Types.Tilt.Wall,
    conMod=Buildings.HeatTransfer.Types.ExteriorConvection.TemperatureWind) 
    "North-facing wall";
  Buildings.HeatTransfer.Convection.Exterior wes(
    A=1,
    azi=Buildings.HeatTransfer.Types.Azimuth.W,
    til=Buildings.HeatTransfer.Types.Tilt.Wall,
    conMod=Buildings.HeatTransfer.Types.ExteriorConvection.TemperatureWind) 
    "West facing wall";
  Buildings.HeatTransfer.Sources.PrescribedTemperature TA1;
  Buildings.HeatTransfer.Sources.PrescribedTemperature TA2;
  Buildings.HeatTransfer.Sources.PrescribedTemperature TA3;
  Buildings.HeatTransfer.Sources.PrescribedTemperature TA4;
  Buildings.HeatTransfer.Convection.Exterior sou(
    A=1,
    azi=Buildings.HeatTransfer.Types.Azimuth.S,
    til=Buildings.HeatTransfer.Types.Tilt.Wall,
    conMod=Buildings.HeatTransfer.Types.ExteriorConvection.TemperatureWind) 
    "South facing wall";
  Buildings.HeatTransfer.Convection.Exterior eas(
    A=1,
    azi=Buildings.HeatTransfer.Types.Azimuth.E,
    til=Buildings.HeatTransfer.Types.Tilt.Wall,
    conMod=Buildings.HeatTransfer.Types.ExteriorConvection.TemperatureWind) 
    "East facing wall";
  Buildings.HeatTransfer.Sources.FixedTemperature TB1(T=293.15);
  Buildings.HeatTransfer.Sources.FixedTemperature TB2(T=293.15);
  Buildings.HeatTransfer.Sources.FixedTemperature TB3(T=293.15);
  Modelica.Blocks.Sources.Ramp direction(duration=3600, height=2*3.14159) 
    "Wind direction (0=from north)";
  Modelica.Blocks.Sources.Constant vWin(k=2) "Wind speed";
equation 
  connect(T1.y, TA4.T);
  connect(T1.y, TA3.T);
  connect(T1.y, TA2.T);
  connect(T1.y, TA1.T);
  connect(TA1.port, nor.solid);
  connect(TA2.port, wes.solid);
  connect(TA3.port, sou.solid);
  connect(TA4.port, eas.solid);
  connect(nor.fluid, TB.port);
  connect(wes.fluid, TB1.port);
  connect(eas.fluid, TB2.port);
  connect(sou.fluid, TB3.port);
  connect(vWin.y, wes.v);
  connect(vWin.y, nor.v);
  connect(vWin.y, eas.v);
  connect(vWin.y, sou.v);
  connect(direction.y, nor.dir);
  connect(direction.y, sou.dir);
  connect(direction.y, wes.dir);
  connect(direction.y, eas.dir);
end Exterior;

Buildings.HeatTransfer.Convection.Examples.Interior

Test model for convective heat transfer coefficients

Buildings.HeatTransfer.Convection.Examples.Interior

Information

This example tests the convective heat transfer models.

Extends from Modelica.Icons.Example (Icon for runnable examples).

Modelica definition

model Interior "Test model for convective heat transfer coefficients"
  import Buildings;
  extends Modelica.Icons.Example;
  Modelica.Blocks.Sources.Ramp step(
    duration=1,
    startTime=0,
    height=10,
    offset=293.15 - 5);
  Buildings.HeatTransfer.Sources.FixedTemperature TB(T=293.15);
  Buildings.HeatTransfer.Convection.Interior conCon(
                                           A=1,
  til=Buildings.HeatTransfer.Types.Tilt.Wall);
  Buildings.HeatTransfer.Convection.Interior conVer(
                                           A=1,
  til=Buildings.HeatTransfer.Types.Tilt.Wall,
  conMod=Buildings.HeatTransfer.Types.InteriorConvection.Temperature);
  Buildings.HeatTransfer.Sources.PrescribedTemperature TA1;
  Buildings.HeatTransfer.Sources.PrescribedTemperature TA2;
  Buildings.HeatTransfer.Sources.PrescribedTemperature TA3;
  Buildings.HeatTransfer.Sources.PrescribedTemperature TA4;
  Buildings.HeatTransfer.Convection.Interior conHorFluTop(
    A=1,
    til=Buildings.HeatTransfer.Types.Tilt.Floor,
    conMod=Buildings.HeatTransfer.Types.InteriorConvection.Temperature) 
    "Convection model with fluid on top";
  Buildings.HeatTransfer.Convection.Interior conHorSolTop(
    A=1,
    til=Buildings.HeatTransfer.Types.Tilt.Ceiling,
    conMod=Buildings.HeatTransfer.Types.InteriorConvection.Temperature) 
    "Convection model with solid on top";
  Buildings.HeatTransfer.Sources.FixedTemperature TB1(T=293.15);
  Buildings.HeatTransfer.Sources.FixedTemperature TB2(T=293.15);
  Buildings.HeatTransfer.Sources.FixedTemperature TB3(T=293.15);
equation 
  connect(conCon.solid, TB.port);
  connect(step.y, TA4.T);
  connect(step.y, TA3.T);
  connect(step.y, TA2.T);
  connect(step.y, TA1.T);
  connect(TA1.port, conCon.fluid);
  connect(TA2.port, conVer.fluid);
  connect(TA3.port, conHorFluTop.fluid);
  connect(TA4.port, conHorSolTop.fluid);
  connect(TB1.port, conVer.solid);
  connect(TB2.port, conHorFluTop.solid);
  connect(TB3.port, conHorSolTop.solid);
end Interior;

Automatically generated Wed Feb 22 15:23:14 2012.