Buildings.Rooms.Examples.TestConditionalConstructions

Package that tests if constructions can be conditionally removed

Information

The thermal zone model Buildings.Rooms.MixedAir allows the conditional declaration of constructions for exterior walls without windows, for exterior walls with windows, for partition walls, for interior surfaces, and for interior surfaces. The models in this package test if the model is well-defined if such constructions are removed. The models in this package do not represent realistic buildings, but are rather designed to test the thermal zone model.

Extends from Modelica.Icons.ExamplesPackage (Icon for packages containing runnable examples).

Package Content

Name Description

BaseClasses Package with base classes for Buildings.Rooms.Examples.TestConditionalConstructions

OnlyExteriorWallNoWindow Test model for room model

OnlyExteriorWallWithWindow Test model for room model

OnlyExteriorWallWithWindowExteriorShade Test model for room model

OnlyExteriorWallWithWindowInteriorShade Test model for room model

OnlyPartition Test model for room model

OnlyConstructionBoundary Test model for room model

OnlySurfaceBoundary Test model for room model

Name	Description
BaseClasses	Package with base classes for Buildings.Rooms.Examples.TestConditionalConstructions
OnlyExteriorWallNoWindow	Test model for room model
OnlyExteriorWallWithWindow	Test model for room model
OnlyExteriorWallWithWindowExteriorShade	Test model for room model
OnlyExteriorWallWithWindowInteriorShade	Test model for room model
OnlyPartition	Test model for room model
OnlyConstructionBoundary	Test model for room model
OnlySurfaceBoundary	Test model for room model

Buildings.Rooms.Examples.TestConditionalConstructions.OnlyExteriorWallNoWindow

Test model for room model

Buildings.Rooms.Examples.TestConditionalConstructions.OnlyExteriorWallNoWindow

Information

Extends from Modelica.Icons.Example (Icon for runnable examples), BaseClasses.PartialTestModel (Partial model that is used to build the test cases).

Parameters

Type Name Default Description

Integer nConExt 1 Number of exterior constructions that do not have a window

Integer nConExtWin 0 Number of exterior constructions that do have a window

Integer nConPar 0 Number of partition constructions

Integer nConBou 0 Number of surface that are connected to constructions that are modeled inside the room

Integer nSurBou 0 Number of surface that are connected to the room air volume

Type	Name	Default	Description
Integer	nConExt	1	Number of exterior constructions that do not have a window
Integer	nConExtWin	0	Number of exterior constructions that do have a window
Integer	nConPar	0	Number of partition constructions
Integer	nConBou	0	Number of surface that are connected to constructions that are modeled inside the room
Integer	nSurBou	0	Number of surface that are connected to the room air volume

Modelica definition

model OnlyExteriorWallNoWindow "Test model for room model"
  extends Modelica.Icons.Example;
  extends BaseClasses.PartialTestModel(
   nConExt=1,
   nConExtWin=0,
   nConPar=0,
   nConBou=0,
   nSurBou=0,
   roo(
    datConExt(layers={matLayExt}, each A=10,
           each til=Buildings.HeatTransfer.Types.Tilt.Floor, each azi=Buildings.HeatTransfer.Types.Azimuth.W)));
end OnlyExteriorWallNoWindow;

Buildings.Rooms.Examples.TestConditionalConstructions.OnlyExteriorWallWithWindow

Test model for room model

Buildings.Rooms.Examples.TestConditionalConstructions.OnlyExteriorWallWithWindow

Information

Extends from Modelica.Icons.Example (Icon for runnable examples), BaseClasses.PartialTestModel (Partial model that is used to build the test cases).

Parameters

Type Name Default Description

Integer nConExt 0 Number of exterior constructions that do not have a window

Integer nConExtWin 2 Number of exterior constructions that do have a window

Integer nConPar 0 Number of partition constructions

Integer nConBou 0 Number of surface that are connected to constructions that are modeled inside the room

Integer nSurBou 0 Number of surface that are connected to the room air volume

Type	Name	Default	Description
Integer	nConExt	0	Number of exterior constructions that do not have a window
Integer	nConExtWin	2	Number of exterior constructions that do have a window
Integer	nConPar	0	Number of partition constructions
Integer	nConBou	0	Number of surface that are connected to constructions that are modeled inside the room
Integer	nSurBou	0	Number of surface that are connected to the room air volume

Modelica definition

model OnlyExteriorWallWithWindow "Test model for room model"
  extends Modelica.Icons.Example;
  extends BaseClasses.PartialTestModel(
   nConExt=0,
   nConExtWin=2,
   nConPar=0,
   nConBou=0,
   nSurBou=0,
   roo(
    datConExtWin(layers={matLayExt, matLayExt}, each A=10,
                 glaSys={glaSys, glaSys},
                 each AWin=4, each fFra=0.1,
                 til={Buildings.HeatTransfer.Types.Tilt.Floor, Buildings.HeatTransfer.Types.Tilt.Ceiling},
                 each azi=Buildings.HeatTransfer.Types.Azimuth.W)));
end OnlyExteriorWallWithWindow;

Buildings.Rooms.Examples.TestConditionalConstructions.OnlyExteriorWallWithWindowExteriorShade

Test model for room model

Buildings.Rooms.Examples.TestConditionalConstructions.OnlyExteriorWallWithWindowExteriorShade

Information

Extends from Modelica.Icons.Example (Icon for runnable examples), BaseClasses.PartialTestModel (Partial model that is used to build the test cases).

Parameters

Type	Name	Default	Description
Integer	nConExt	0	Number of exterior constructions that do not have a window
Integer	nConExtWin	2	Number of exterior constructions that do have a window
Integer	nConPar	0	Number of partition constructions
Integer	nConBou	0	Number of surface that are connected to constructions that are modeled inside the room
Integer	nSurBou	0	Number of surface that are connected to the room air volume

Modelica definition

model OnlyExteriorWallWithWindowExteriorShade 
  "Test model for room model"
  extends Modelica.Icons.Example;
  extends BaseClasses.PartialTestModel(
   nConExt=0,
   nConExtWin=2,
   nConPar=0,
   nConBou=0,
   nSurBou=0,
   roo(
    datConExtWin(layers={matLayExt, matLayExt}, each A=10,
                 glaSys={glaSys, glaSys},
                 each AWin=4, each fFra=0.1,
                 til={Buildings.HeatTransfer.Types.Tilt.Floor, Buildings.HeatTransfer.Types.Tilt.Ceiling},
                 each azi=Buildings.HeatTransfer.Types.Azimuth.W)),
    glaSys(haveExteriorShade=true));
  Modelica.Blocks.Sources.Constant uSha(k=0.5) 
    "Control signal for the shading device";
  Modelica.Blocks.Routing.Replicator replicator(nout=max(1,nConExtWin));
equation 
  connect(uSha.y,replicator. u);
  connect(roo.uSha,replicator. y);
end OnlyExteriorWallWithWindowExteriorShade;

Buildings.Rooms.Examples.TestConditionalConstructions.OnlyExteriorWallWithWindowInteriorShade

Test model for room model

Buildings.Rooms.Examples.TestConditionalConstructions.OnlyExteriorWallWithWindowInteriorShade

Information

Extends from Modelica.Icons.Example (Icon for runnable examples), BaseClasses.PartialTestModel (Partial model that is used to build the test cases).

Parameters

Type	Name	Default	Description
Integer	nConExt	0	Number of exterior constructions that do not have a window
Integer	nConExtWin	2	Number of exterior constructions that do have a window
Integer	nConPar	0	Number of partition constructions
Integer	nConBou	0	Number of surface that are connected to constructions that are modeled inside the room
Integer	nSurBou	0	Number of surface that are connected to the room air volume

Modelica definition

model OnlyExteriorWallWithWindowInteriorShade 
  "Test model for room model"
  extends Modelica.Icons.Example;
  extends BaseClasses.PartialTestModel(
   nConExt=0,
   nConExtWin=2,
   nConPar=0,
   nConBou=0,
   nSurBou=0,
   roo(
    datConExtWin(layers={matLayExt, matLayExt}, each A=10,
                 glaSys={glaSys, glaSys},
                 each AWin=4, each fFra=0.1,
                 til={Buildings.HeatTransfer.Types.Tilt.Floor, Buildings.HeatTransfer.Types.Tilt.Ceiling},
                 each azi=Buildings.HeatTransfer.Types.Azimuth.W)),
    glaSys(haveInteriorShade=true));
  Modelica.Blocks.Sources.Constant uSha(k=0.5) 
    "Control signal for the shading device";
  Modelica.Blocks.Routing.Replicator replicator(nout=max(1,nConExtWin));
equation 
  connect(uSha.y,replicator. u);
  connect(roo.uSha,replicator. y);
end OnlyExteriorWallWithWindowInteriorShade;

Buildings.Rooms.Examples.TestConditionalConstructions.OnlyPartition

Test model for room model

Buildings.Rooms.Examples.TestConditionalConstructions.OnlyPartition

Information

Extends from Modelica.Icons.Example (Icon for runnable examples), BaseClasses.PartialTestModel (Partial model that is used to build the test cases).

Parameters

Type Name Default Description

Integer nConExt 0 Number of exterior constructions that do not have a window

Integer nConExtWin 0 Number of exterior constructions that do have a window

Integer nConPar 1 Number of partition constructions

Integer nConBou 0 Number of surface that are connected to constructions that are modeled inside the room

Integer nSurBou 0 Number of surface that are connected to the room air volume

Type	Name	Default	Description
Integer	nConExt	0	Number of exterior constructions that do not have a window
Integer	nConExtWin	0	Number of exterior constructions that do have a window
Integer	nConPar	1	Number of partition constructions
Integer	nConBou	0	Number of surface that are connected to constructions that are modeled inside the room
Integer	nSurBou	0	Number of surface that are connected to the room air volume

Modelica definition

model OnlyPartition "Test model for room model"
  extends Modelica.Icons.Example;
  extends BaseClasses.PartialTestModel(
   nConExt=0,
   nConExtWin=0,
   nConPar=1,
   nConBou=0,
   nSurBou=0,
   roo(
    datConPar(layers={matLayPar}, each A=10,
    each til=Buildings.HeatTransfer.Types.Tilt.Floor,
    each azi=Buildings.HeatTransfer.Types.Azimuth.W)));

end OnlyPartition;

Buildings.Rooms.Examples.TestConditionalConstructions.OnlyConstructionBoundary

Test model for room model

Buildings.Rooms.Examples.TestConditionalConstructions.OnlyConstructionBoundary

Information

Extends from Modelica.Icons.Example (Icon for runnable examples), BaseClasses.PartialTestModel (Partial model that is used to build the test cases).

Parameters

Type Name Default Description

Integer nConExt 0 Number of exterior constructions that do not have a window

Integer nConExtWin 0 Number of exterior constructions that do have a window

Integer nConPar 0 Number of partition constructions

Integer nConBou 1 Number of surface that are connected to constructions that are modeled inside the room

Integer nSurBou 0 Number of surface that are connected to the room air volume

Type	Name	Default	Description
Integer	nConExt	0	Number of exterior constructions that do not have a window
Integer	nConExtWin	0	Number of exterior constructions that do have a window
Integer	nConPar	0	Number of partition constructions
Integer	nConBou	1	Number of surface that are connected to constructions that are modeled inside the room
Integer	nSurBou	0	Number of surface that are connected to the room air volume

Modelica definition

model OnlyConstructionBoundary "Test model for room model"
  extends Modelica.Icons.Example;
  extends BaseClasses.PartialTestModel(
   nConExt=0,
   nConExtWin=0,
   nConPar=0,
   nConBou=1,
   nSurBou=0,
   roo(
    datConBou(layers={matLayPar}, each A=12, each til=Buildings.HeatTransfer.Types.Tilt.Floor,
    each azi=Buildings.HeatTransfer.Types.Azimuth.W)));
  Buildings.HeatTransfer.Sources.FixedTemperature TBou1[nConBou](each T=288.15) 
    "Boundary condition for construction";
equation 
  connect(TBou1.port, roo.surf_conBou);
end OnlyConstructionBoundary;

Buildings.Rooms.Examples.TestConditionalConstructions.OnlySurfaceBoundary

Test model for room model

Buildings.Rooms.Examples.TestConditionalConstructions.OnlySurfaceBoundary

Information

Extends from Modelica.Icons.Example (Icon for runnable examples), BaseClasses.PartialTestModel (Partial model that is used to build the test cases).

Parameters

Type Name Default Description

Integer nConExt 0 Number of exterior constructions that do not have a window

Integer nConExtWin 0 Number of exterior constructions that do have a window

Integer nConPar 0 Number of partition constructions

Integer nConBou 0 Number of surface that are connected to constructions that are modeled inside the room

Integer nSurBou 1 Number of surface that are connected to the room air volume

Type	Name	Default	Description
Integer	nConExt	0	Number of exterior constructions that do not have a window
Integer	nConExtWin	0	Number of exterior constructions that do have a window
Integer	nConPar	0	Number of partition constructions
Integer	nConBou	0	Number of surface that are connected to constructions that are modeled inside the room
Integer	nSurBou	1	Number of surface that are connected to the room air volume

Modelica definition

model OnlySurfaceBoundary "Test model for room model"
  extends Modelica.Icons.Example;
  extends BaseClasses.PartialTestModel(
   nConExt=0,
   nConExtWin=0,
   nConPar=0,
   nConBou=0,
   nSurBou=1,
   roo(
    surBou(each A=15, each absIR=0.9, each absSol=0.9, each til=Buildings.HeatTransfer.Types.Tilt.Floor)));
  Buildings.HeatTransfer.Sources.FixedTemperature TBou[nSurBou](each T=288.15) 
    "Boundary condition for construction";
  HeatTransfer.Conduction.MultiLayer conOut[nSurBou](each A=15, redeclare Buildings.HeatTransfer.Data.OpaqueConstructions.Brick120
                                                               layers) 
    "Construction that is modeled outside of room";
equation 
  connect(TBou.port, conOut.port_b);
  connect(roo.surf_surBou, conOut.port_a);
end OnlySurfaceBoundary;

Automatically generated Fri Nov 4 08:29:25 2011.