Buildings.Fluid.Storage.Examples

Collection of models that illustrate model use and test models

Information


This package contains examples for the use of models
that can be found in 
Buildings.Fluid.Storage.


Extends from Buildings.BaseClasses.BaseIconExamples (Icon for Examples packages).

Package Content




NameDescription


ExpansionVessel
Test model for expansion vessel


Stratified
Test model for stratified tank








Buildings.Fluid.Storage.Examples.ExpansionVessel

Test model for expansion vessel

Buildings.Fluid.Storage.Examples.ExpansionVessel

Information



This model tests a pressure expansion vessel. The medium model that is used in this
example changes its density as a function of temperature.
To see the effect of the expansion vessel, delete the connecting line between
the volume and the expansion vessel and check how much more the pressure increases
as the fluid is heated.




Modelica definition


model ExpansionVessel "Test model for expansion vessel"
  import Buildings;

 package Medium = Modelica.Media.Water.WaterIF97OnePhase_ph "Medium model";
// package Medium = Buildings.Media.ConstantPropertyLiquidWaterCompressible "Medium model";

  inner Modelica.Fluid.System system(p_ambient=400000, massDynamics=Modelica.Fluid.Types.Dynamics.DynamicFreeInitial);
  Buildings.Fluid.Storage.ExpansionVessel expVes(
    redeclare package Medium = Medium, VTot=0.1) "Expansion vessel";
  Buildings.Fluid.MixingVolumes.MixingVolume vol(
    redeclare package Medium = Medium,
    use_HeatTransfer=true,
    V=1,
    nPorts=1) "Volume of water";
  Modelica.Blocks.Sources.Pulse pulse(
    amplitude=20,
    period=3600,
    offset=293.15);
  Modelica.Thermal.HeatTransfer.Sources.PrescribedTemperature preTem;
  Modelica.Thermal.HeatTransfer.Components.ThermalConductor theCon(G=10000);
equation 
  connect(pulse.y, preTem.T);
  connect(preTem.port, theCon.port_a);
  connect(theCon.port_b, vol.heatPort);
  connect(vol.ports[1], expVes.port_a);
end ExpansionVessel;







Buildings.Fluid.Storage.Examples.Stratified

Test model for stratified tank

Buildings.Fluid.Storage.Examples.Stratified

Information



This test model compares two tank models. The only difference between
the two tank models is that one uses the model from Stefan Wischhusen
that reduces the numerical diffusion that is induced by the upwind
discretization scheme.




Modelica definition


model Stratified "Test model for stratified tank"

 package Medium = Buildings.Media.ConstantPropertyLiquidWater "Medium model";

  Buildings.Fluid.Storage.Stratified tanSim(
    redeclare package Medium = Medium,
    nSeg=10,
    hTan=3,
    dIns=0.3,
    VTan=5,
    m_flow_nominal=10) "Tank";
    Modelica.Blocks.Sources.TimeTable TWat(table=[0,273.15 + 40; 3600,273.15 +
        40; 3600,273.15 + 20; 7200,273.15 + 20]) "Water temperature";
  Buildings.Fluid.Sources.Boundary_pT sou_1(
    p=300000 + 5000,
    T=273.15 + 50,
    redeclare package Medium = Medium,
    use_T_in=true,
    nPorts=2);
  Buildings.Fluid.Sources.Boundary_pT sin_1(
    redeclare package Medium = Medium,
    T=273.15 + 20,
    use_p_in=true,
    p=300000,
    nPorts=2);
    FixedResistances.FixedResistanceDpM res_1(
    from_dp=true,
    redeclare package Medium = Medium,
    dp_nominal=5000,
    m_flow_nominal=10);
  Buildings.Fluid.Storage.StratifiedEnhanced tanEnh(
    redeclare package Medium = Medium,
    nSeg=10,
    a=1E-4,
    hTan=3,
    dIns=0.3,
    VTan=5,
    m_flow_nominal=10) "Tank";
    FixedResistances.FixedResistanceDpM res_2(
    from_dp=true,
    redeclare package Medium = Medium,
    dp_nominal=5000,
    m_flow_nominal=10);
  Buildings.Fluid.Sensors.EnthalpyFlowRate HOut_flow(redeclare package Medium
      = Medium) "Enthalpy flow rate";
  Buildings.Fluid.Sensors.EnthalpyFlowRate HOut_flow1(redeclare package Medium
      = Medium) "Enthalpy flow rate";
  Modelica.Blocks.Continuous.Integrator dH 
    "Differenz in enthalpy (should be zero at steady-state)";
  Modelica.Blocks.Math.Add add(k2=-1);
    Modelica.Blocks.Sources.TimeTable P(table=[0,300000; 4200,300000; 4200,
        305000; 7200,305000; 7200,310000; 10800,310000; 10800,305000]) 
    "Pressure boundary condition";
  Modelica.Blocks.Sources.Sine sine(
    freqHz=1/86400,
    amplitude=10,
    offset=273.15 + 20);
  Modelica.Thermal.HeatTransfer.Sources.PrescribedTemperature TBCSid2 
    "Boundary condition for tank";
  Modelica.Thermal.HeatTransfer.Sources.PrescribedTemperature TBCSid1 
    "Boundary condition for tank";
  Modelica.Thermal.HeatTransfer.Sources.PrescribedTemperature TBCTop1 
    "Boundary condition for tank";
  Modelica.Thermal.HeatTransfer.Sources.PrescribedTemperature TBCTop2 
    "Boundary condition for tank";
  inner Modelica.Fluid.System system;
equation 
  connect(TWat.y, sou_1.T_in);
  connect(tanSim.port_b, HOut_flow.port_a);
  connect(HOut_flow.port_b, res_1.port_a);
  connect(tanEnh.port_b, HOut_flow1.port_a);
  connect(HOut_flow1.port_b, res_2.port_a);
  connect(add.y, dH.u);
  connect(HOut_flow.H_flow, add.u1);
  connect(HOut_flow1.H_flow, add.u2);
  connect(P.y, sin_1.p_in);
  connect(sine.y, TBCSid1.T);
  connect(sine.y, TBCTop1.T);
  connect(sine.y, TBCSid2.T);
  connect(sine.y, TBCTop2.T);
  connect(TBCSid2.port, tanEnh.heaPorSid);
  connect(TBCTop2.port, tanEnh.heaPorTop);
  connect(sin_1.ports[1], res_1.port_b);
  connect(sin_1.ports[2], res_2.port_b);
  connect(sou_1.ports[1], tanSim.port_a);
  connect(sou_1.ports[2], tanEnh.port_a);
  connect(TBCSid1.port, tanSim.heaPorSid);
  connect(TBCTop1.port, tanSim.heaPorTop);
end Stratified;





HTML-documentation generated by Dymola Sat Feb  6 17:38:30 2010.