Modelica.Thermal.FluidHeatFlow.Examples.Utilities

Utility models for examples

Information

This package contains utility components used for the test examples.

Main Authors:

Anton Haumer
Technical Consulting & Electrical Engineering
A-3423 St.Andrae-Woerdern, Austria
email: a.haumer@haumer.at

Dr. Christian Kral
Austrian Institute of Technology, AIT
Giefinggasse 2
A-1210 Vienna, Austria

This Modelica package is free software and the use is completely at your own risk; it can be redistributed and/or modified under the terms of the Modelica License 2. For license conditions (including the disclaimer of warranty) see Modelica.UsersGuide.ModelicaLicense2 or visit https://www.modelica.org/licenses/ModelicaLicense2.

Extends from Modelica.Icons.UtilitiesPackage (Icon for utility packages).

Package Content

Name	Description
DoubleRamp	Ramp going up and down

Modelica.Thermal.FluidHeatFlow.Examples.Utilities.DoubleRamp

Ramp going up and down

Information

Block generating the sum of two ramps.

Extends from Modelica.Blocks.Interfaces.SO (Single Output continuous control block).

Parameters

Name Description

offset Offset of ramps

startTime StartTime of 1st ramp [s]

interval Interval between end of 1st and beginning of 2nd ramp [s]

Ramp 1

height_1 Height of ramp

duration_1 Duration of ramp [s]

Ramp 2

height_2 Height of ramp

duration_2 Duration of ramp [s]

Name	Description
offset	Offset of ramps
startTime	StartTime of 1st ramp [s]
interval	Interval between end of 1st and beginning of 2nd ramp [s]
Ramp 1
height_1	Height of ramp
duration_1	Duration of ramp [s]
Ramp 2
height_2	Height of ramp
duration_2	Duration of ramp [s]

Connectors

Name Description

y Connector of Real output signal

Name	Description
y	Connector of Real output signal

Automatically generated Mon Sep 23 17:21:08 2013.