Modelica.Electrical.Machines.BasicMachines.Transformers.Yd

Transformers: primary Y / secondary d

Information


This package contains transformers primary Y connected / secondary d connected in all possbile vector groups.

Extends from Modelica.Icons.VariantsPackage (Icon for package containing variants).

Package Content

NameDescription
Modelica.Electrical.Machines.BasicMachines.Transformers.Yd.Yd01 Yd01 Transformer Yd1
Modelica.Electrical.Machines.BasicMachines.Transformers.Yd.Yd03 Yd03 Transformer Yd3
Modelica.Electrical.Machines.BasicMachines.Transformers.Yd.Yd05 Yd05 Transformer Yd5
Modelica.Electrical.Machines.BasicMachines.Transformers.Yd.Yd07 Yd07 Transformer Yd7
Modelica.Electrical.Machines.BasicMachines.Transformers.Yd.Yd09 Yd09 Transformer Yd9
Modelica.Electrical.Machines.BasicMachines.Transformers.Yd.Yd11 Yd11 Transformer Yd11


Modelica.Electrical.Machines.BasicMachines.Transformers.Yd.Yd01 Modelica.Electrical.Machines.BasicMachines.Transformers.Yd.Yd01

Transformer Yd1

Modelica.Electrical.Machines.BasicMachines.Transformers.Yd.Yd01

Information


Transformer Yd1

Typical parameters see: PartialBasicTransformer

Extends from Machines.Interfaces.PartialBasicTransformer (Partial model of threephase transformer).

Parameters

TypeNameDefaultDescription
Realn Ratio primary voltage (line-to-line) / secondary voltage (line-to-line)
BooleanuseThermalPortfalseEnable / disable (=fixed temperatures) thermal port
Operational temperatures
TemperatureT1Operational Operational temperature of primary resistance [K]
TemperatureT2Operational Operational temperature of secondary resistance [K]
Nominal resistances and inductances
ResistanceR1 Primary resistance per phase at TRef [Ohm]
TemperatureT1Ref Reference temperature of primary resistance [K]
LinearTemperatureCoefficient20alpha20_1 Temperature coefficient of primary resistance at 20 degC [1/K]
InductanceL1sigma Primary stray inductance per phase [H]
ResistanceR2 Secondary resistance per phase at TRef [Ohm]
TemperatureT2Ref Reference temperature of secondary resistance [K]
LinearTemperatureCoefficient20alpha20_2 Temperature coefficient of secondary resistance at 20 degC [1/K]
InductanceL2sigma Secondary stray inductance per phase [H]

Connectors

TypeNameDescription
PositivePlugplug1Primary plug
NegativePlugplug2Secondary plug
ThermalPortTransformerthermalPort 
NegativePinstarpoint1 

Modelica definition

model Yd01 "Transformer Yd1"

  extends Machines.Interfaces.PartialBasicTransformer(
    final VectorGroup="Yd01");
  Modelica.Electrical.MultiPhase.Basic.Star star1(final m=m);
  Modelica.Electrical.Analog.Interfaces.NegativePin starpoint1;
  Modelica.Electrical.MultiPhase.Basic.Delta Delta2(final m=m);
equation 
  connect(star1.pin_n, starpoint1);
  connect(Delta2.plug_p, r2.plug_n);
  connect(l1sigma.plug_n, core.plug_p1);
  connect(core.plug_n1, star1.plug_p);
  connect(core.plug_n2, core.plug_p3);
  connect(core.plug_n3, Delta2.plug_n);
  connect(core.plug_p2, l2sigma.plug_p);
end Yd01;

Modelica.Electrical.Machines.BasicMachines.Transformers.Yd.Yd03 Modelica.Electrical.Machines.BasicMachines.Transformers.Yd.Yd03

Transformer Yd3

Modelica.Electrical.Machines.BasicMachines.Transformers.Yd.Yd03

Information


Transformer Yd3

Typical parameters see: PartialBasicTransformer

Extends from Machines.Interfaces.PartialBasicTransformer (Partial model of threephase transformer).

Parameters

TypeNameDefaultDescription
Realn Ratio primary voltage (line-to-line) / secondary voltage (line-to-line)
BooleanuseThermalPortfalseEnable / disable (=fixed temperatures) thermal port
Operational temperatures
TemperatureT1Operational Operational temperature of primary resistance [K]
TemperatureT2Operational Operational temperature of secondary resistance [K]
Nominal resistances and inductances
ResistanceR1 Primary resistance per phase at TRef [Ohm]
TemperatureT1Ref Reference temperature of primary resistance [K]
LinearTemperatureCoefficient20alpha20_1 Temperature coefficient of primary resistance at 20 degC [1/K]
InductanceL1sigma Primary stray inductance per phase [H]
ResistanceR2 Secondary resistance per phase at TRef [Ohm]
TemperatureT2Ref Reference temperature of secondary resistance [K]
LinearTemperatureCoefficient20alpha20_2 Temperature coefficient of secondary resistance at 20 degC [1/K]
InductanceL2sigma Secondary stray inductance per phase [H]

Connectors

TypeNameDescription
PositivePlugplug1Primary plug
NegativePlugplug2Secondary plug
ThermalPortTransformerthermalPort 
NegativePinstarpoint1 

Modelica definition

model Yd03 "Transformer Yd3"

  extends Machines.Interfaces.PartialBasicTransformer(
    final VectorGroup="Yd03");
  Modelica.Electrical.MultiPhase.Basic.Star star1(final m=m);
  Modelica.Electrical.Analog.Interfaces.NegativePin starpoint1;
  Modelica.Electrical.MultiPhase.Basic.Delta Delta2(final m=m);
  Modelica.Electrical.MultiPhase.Basic.Delta Rot2(final m=m);
equation 
  connect(star1.pin_n, starpoint1);
  connect(Delta2.plug_n, r2.plug_n);
  connect(l2sigma.plug_p, Rot2.plug_p);
  connect(l1sigma.plug_n, core.plug_p1);
  connect(core.plug_n1, star1.plug_p);
  connect(core.plug_n2, core.plug_p3);
  connect(core.plug_p2, Delta2.plug_p);
  connect(core.plug_n3, Rot2.plug_n);
end Yd03;

Modelica.Electrical.Machines.BasicMachines.Transformers.Yd.Yd05 Modelica.Electrical.Machines.BasicMachines.Transformers.Yd.Yd05

Transformer Yd5

Modelica.Electrical.Machines.BasicMachines.Transformers.Yd.Yd05

Information


Transformer Yd5

Typical parameters see: PartialBasicTransformer

Extends from Machines.Interfaces.PartialBasicTransformer (Partial model of threephase transformer).

Parameters

TypeNameDefaultDescription
Realn Ratio primary voltage (line-to-line) / secondary voltage (line-to-line)
BooleanuseThermalPortfalseEnable / disable (=fixed temperatures) thermal port
Operational temperatures
TemperatureT1Operational Operational temperature of primary resistance [K]
TemperatureT2Operational Operational temperature of secondary resistance [K]
Nominal resistances and inductances
ResistanceR1 Primary resistance per phase at TRef [Ohm]
TemperatureT1Ref Reference temperature of primary resistance [K]
LinearTemperatureCoefficient20alpha20_1 Temperature coefficient of primary resistance at 20 degC [1/K]
InductanceL1sigma Primary stray inductance per phase [H]
ResistanceR2 Secondary resistance per phase at TRef [Ohm]
TemperatureT2Ref Reference temperature of secondary resistance [K]
LinearTemperatureCoefficient20alpha20_2 Temperature coefficient of secondary resistance at 20 degC [1/K]
InductanceL2sigma Secondary stray inductance per phase [H]

Connectors

TypeNameDescription
PositivePlugplug1Primary plug
NegativePlugplug2Secondary plug
ThermalPortTransformerthermalPort 
NegativePinstarpoint1 

Modelica definition

model Yd05 "Transformer Yd5"

  extends Machines.Interfaces.PartialBasicTransformer(
    final VectorGroup="Yd05");
  Modelica.Electrical.MultiPhase.Basic.Star star1(final m=m);
  Modelica.Electrical.Analog.Interfaces.NegativePin starpoint1;
  Modelica.Electrical.MultiPhase.Basic.Delta Delta2(final m=m);
equation 
  connect(star1.pin_n, starpoint1);
  connect(Delta2.plug_n, r2.plug_n);
  connect(l1sigma.plug_n, core.plug_p1);
  connect(core.plug_n1, star1.plug_p);
  connect(core.plug_n2, core.plug_p3);
  connect(core.plug_n3, l2sigma.plug_p);
  connect(core.plug_p2, Delta2.plug_p);
end Yd05;

Modelica.Electrical.Machines.BasicMachines.Transformers.Yd.Yd07 Modelica.Electrical.Machines.BasicMachines.Transformers.Yd.Yd07

Transformer Yd7

Modelica.Electrical.Machines.BasicMachines.Transformers.Yd.Yd07

Information


Transformer Yd7

Typical parameters see: PartialBasicTransformer

Extends from Machines.Interfaces.PartialBasicTransformer (Partial model of threephase transformer).

Parameters

TypeNameDefaultDescription
Realn Ratio primary voltage (line-to-line) / secondary voltage (line-to-line)
BooleanuseThermalPortfalseEnable / disable (=fixed temperatures) thermal port
Operational temperatures
TemperatureT1Operational Operational temperature of primary resistance [K]
TemperatureT2Operational Operational temperature of secondary resistance [K]
Nominal resistances and inductances
ResistanceR1 Primary resistance per phase at TRef [Ohm]
TemperatureT1Ref Reference temperature of primary resistance [K]
LinearTemperatureCoefficient20alpha20_1 Temperature coefficient of primary resistance at 20 degC [1/K]
InductanceL1sigma Primary stray inductance per phase [H]
ResistanceR2 Secondary resistance per phase at TRef [Ohm]
TemperatureT2Ref Reference temperature of secondary resistance [K]
LinearTemperatureCoefficient20alpha20_2 Temperature coefficient of secondary resistance at 20 degC [1/K]
InductanceL2sigma Secondary stray inductance per phase [H]

Connectors

TypeNameDescription
PositivePlugplug1Primary plug
NegativePlugplug2Secondary plug
ThermalPortTransformerthermalPort 
NegativePinstarpoint1 

Modelica definition

model Yd07 "Transformer Yd7"

  extends Machines.Interfaces.PartialBasicTransformer(
    final VectorGroup="Yd07");
  Modelica.Electrical.MultiPhase.Basic.Star star1(final m=m);
  Modelica.Electrical.Analog.Interfaces.NegativePin starpoint1;
  Modelica.Electrical.MultiPhase.Basic.Delta Delta2(final m=m);
equation 
  connect(star1.pin_n, starpoint1);
  connect(Delta2.plug_p, r2.plug_n);
  connect(l1sigma.plug_n, core.plug_p1);
  connect(core.plug_n1, star1.plug_p);
  connect(core.plug_n2, core.plug_p3);
  connect(core.plug_p2, Delta2.plug_n);
  connect(l2sigma.plug_p, core.plug_n3);
end Yd07;

Modelica.Electrical.Machines.BasicMachines.Transformers.Yd.Yd09 Modelica.Electrical.Machines.BasicMachines.Transformers.Yd.Yd09

Transformer Yd9

Modelica.Electrical.Machines.BasicMachines.Transformers.Yd.Yd09

Information


Transformer Yd9

Typical parameters see: PartialBasicTransformer

Extends from Machines.Interfaces.PartialBasicTransformer (Partial model of threephase transformer).

Parameters

TypeNameDefaultDescription
Realn Ratio primary voltage (line-to-line) / secondary voltage (line-to-line)
BooleanuseThermalPortfalseEnable / disable (=fixed temperatures) thermal port
Operational temperatures
TemperatureT1Operational Operational temperature of primary resistance [K]
TemperatureT2Operational Operational temperature of secondary resistance [K]
Nominal resistances and inductances
ResistanceR1 Primary resistance per phase at TRef [Ohm]
TemperatureT1Ref Reference temperature of primary resistance [K]
LinearTemperatureCoefficient20alpha20_1 Temperature coefficient of primary resistance at 20 degC [1/K]
InductanceL1sigma Primary stray inductance per phase [H]
ResistanceR2 Secondary resistance per phase at TRef [Ohm]
TemperatureT2Ref Reference temperature of secondary resistance [K]
LinearTemperatureCoefficient20alpha20_2 Temperature coefficient of secondary resistance at 20 degC [1/K]
InductanceL2sigma Secondary stray inductance per phase [H]

Connectors

TypeNameDescription
PositivePlugplug1Primary plug
NegativePlugplug2Secondary plug
ThermalPortTransformerthermalPort 
NegativePinstarpoint1 

Modelica definition

model Yd09 "Transformer Yd9"

  extends Machines.Interfaces.PartialBasicTransformer(
    final VectorGroup="Yd09");
  Modelica.Electrical.MultiPhase.Basic.Star star1(final m=m);
  Modelica.Electrical.Analog.Interfaces.NegativePin starpoint1;
  Modelica.Electrical.MultiPhase.Basic.Delta Delta2(final m=m);
  Modelica.Electrical.MultiPhase.Basic.Delta Rot2(final m=m);
equation 
  connect(star1.pin_n, starpoint1);
  connect(Rot2.plug_p, l2sigma.plug_p);
  connect(Delta2.plug_n, r2.plug_n);
  connect(l1sigma.plug_n, core.plug_p1);
  connect(core.plug_n1, star1.plug_p);
  connect(core.plug_n2, core.plug_p3);
  connect(core.plug_p2, Rot2.plug_n);
  connect(core.plug_n3, Delta2.plug_p);
end Yd09;

Modelica.Electrical.Machines.BasicMachines.Transformers.Yd.Yd11 Modelica.Electrical.Machines.BasicMachines.Transformers.Yd.Yd11

Transformer Yd11

Modelica.Electrical.Machines.BasicMachines.Transformers.Yd.Yd11

Information


Transformer Yd11

Typical parameters see: PartialBasicTransformer

Extends from Machines.Interfaces.PartialBasicTransformer (Partial model of threephase transformer).

Parameters

TypeNameDefaultDescription
Realn Ratio primary voltage (line-to-line) / secondary voltage (line-to-line)
BooleanuseThermalPortfalseEnable / disable (=fixed temperatures) thermal port
Operational temperatures
TemperatureT1Operational Operational temperature of primary resistance [K]
TemperatureT2Operational Operational temperature of secondary resistance [K]
Nominal resistances and inductances
ResistanceR1 Primary resistance per phase at TRef [Ohm]
TemperatureT1Ref Reference temperature of primary resistance [K]
LinearTemperatureCoefficient20alpha20_1 Temperature coefficient of primary resistance at 20 degC [1/K]
InductanceL1sigma Primary stray inductance per phase [H]
ResistanceR2 Secondary resistance per phase at TRef [Ohm]
TemperatureT2Ref Reference temperature of secondary resistance [K]
LinearTemperatureCoefficient20alpha20_2 Temperature coefficient of secondary resistance at 20 degC [1/K]
InductanceL2sigma Secondary stray inductance per phase [H]

Connectors

TypeNameDescription
PositivePlugplug1Primary plug
NegativePlugplug2Secondary plug
ThermalPortTransformerthermalPort 
NegativePinstarpoint1 

Modelica definition

model Yd11 "Transformer Yd11"

  extends Machines.Interfaces.PartialBasicTransformer(
    final VectorGroup="Yd11");
  Modelica.Electrical.MultiPhase.Basic.Star star1(final m=m);
  Modelica.Electrical.Analog.Interfaces.NegativePin starpoint1;
  Modelica.Electrical.MultiPhase.Basic.Delta Delta2(final m=m);
equation 
  connect(star1.pin_n, starpoint1);
  connect(Delta2.plug_n, r2.plug_n);
  connect(l1sigma.plug_n, core.plug_p1);
  connect(core.plug_n1, star1.plug_p);
  connect(core.plug_n2, core.plug_p3);
  connect(core.plug_n3, Delta2.plug_p);
  connect(core.plug_p2, l2sigma.plug_p);
end Yd11;

Automatically generated Fri Nov 12 16:28:53 2010.