Library Rotational is a free Modelica package providing 1-dimensional, rotational mechanical components to model in a convenient way drive trains with frictional losses. A typical, simple example is shown in the next figure:
For an introduction, have especially a look at:
In version 3.0 of the Modelica Standard Library, the basic design of the library has changed: Previously, bearing connectors could or could not be connected. In 3.0, the bearing connector is renamed to "support" and this connector is enabled via parameter "useSupport". If the support connector is enabled, it must be connected, and if it is not enabled, it must not be connected.
Copyright © 1998-2009, Modelica Association and DLR.
This Modelica package is free software; it can be redistributed and/or modified under the terms of the Modelica license, see the license conditions and the accompanying disclaimer here.
Extends from Modelica.Icons.Library2 (Icon for library where additional icon elements shall be added).
| Name | Description |
|---|---|
 UsersGuide
| User's Guide of Rotational Library |
 Examples
| Demonstration examples of the components of this package |
 Components
| Components for 1D rotational mechanical drive trains |
 Sources
| Sources to drive 1D rotational mechanical components |
 Sensors
| Sensors to measure variables in 1D rotational mechanical components |
 Interfaces
| Connectors and partial models for 1D rotational mechanical components |