Buildings.Fluid.HeatExchangers.ActiveBeams.Data.Trox
Performance data for Trox
Information
Package with performance data for active beams from Trox.
Package Content
| Name | Description |
|---|---|
 DID632A_nozzleH_length6ft_cooling
|
Performance data for Trox DID 632A for cooling mode |
| DID632A_nozzleH_length6ft_heating
|
Performance data for Trox DID 632A for heating mode |
Buildings.Fluid.HeatExchangers.ActiveBeams.Data.Trox.DID632A_nozzleH_length6ft_cooling
Performance data for Trox DID 632A for cooling mode
Information
Performance data for Trox active beam for cooling mode.
Extends from Buildings.Fluid.HeatExchangers.ActiveBeams.Data.Generic (Generic data record for active beam).
Contents
| Type | Name | Default | Description |
|---|---|---|---|
| Nominal condition | |||
| MassFlowRate | mAir_flow_nominal | 0.0792 | Nominal air mass flow rate per beam [kg/s] |
| MassFlowRate | mWat_flow_nominal | 0.094 | Nominal water mass flow rate per beam [kg/s] |
| PressureDifference | dpWat_nominal | 10000 | Water-side nominal pressure drop per beam [Pa] |
| PressureDifference | dpAir_nominal | 100 | Air-side nominal pressure drop [Pa] |
| TemperatureDifference | dT_nominal | -10 | Nominal temperature difference water inlet minus room air [K] |
| HeatFlowRate | Q_flow_nominal | -1092 | Nominal capacity per beam [W] |
Modelica definition
record DID632A_nozzleH_length6ft_cooling =
Buildings.Fluid.HeatExchangers.ActiveBeams.Data.Generic (
primaryAir(
r_V = {0,0.714286, 1,1.2857},
f = {0,0.823403, 1,1.1256}),
dT(
f = {0,0.5,1},
r_dT=
{0,0.5,1}),
water(
r_V = {0,0.33333,0.5,0.666667,0.833333,1,1.333333},
f = {0,0.71,0.85,0.92,0.97,1,1.04}),
mAir_flow_nominal=0.0792,
mWat_flow_nominal = 0.094,
dpWat_nominal = 10000,
dpAir_nominal = 100,
dT_nominal = -10,
Q_flow_nominal = -1092)
"Performance data for Trox DID 632A for cooling mode";
Buildings.Fluid.HeatExchangers.ActiveBeams.Data.Trox.DID632A_nozzleH_length6ft_heating
Performance data for Trox DID 632A for heating mode
Information
Performance data for Trox active beam for heating mode.
Extends from Buildings.Fluid.HeatExchangers.ActiveBeams.Data.Generic (Generic data record for active beam).
Contents
| Type | Name | Default | Description |
|---|---|---|---|
| Nominal condition | |||
| MassFlowRate | mAir_flow_nominal | 0.0792 | Nominal air mass flow rate per beam [kg/s] |
| MassFlowRate | mWat_flow_nominal | 0.094 | Nominal water mass flow rate per beam [kg/s] |
| PressureDifference | dpWat_nominal | 10000 | Water-side nominal pressure drop per beam [Pa] |
| PressureDifference | dpAir_nominal | 100 | Air-side nominal pressure drop [Pa] |
| TemperatureDifference | dT_nominal | 27.8 | Nominal temperature difference water inlet minus room air [K] |
| HeatFlowRate | Q_flow_nominal | 2832 | Nominal capacity per beam [W] |
Modelica definition
record DID632A_nozzleH_length6ft_heating =
Buildings.Fluid.HeatExchangers.ActiveBeams.Data.Generic (
dT(
f = {0,0.5,1},
r_dT=
{0,0.5,1}),
primaryAir(
r_V = {0,0.714286, 1, 1.2857},
f = {0,0.8554, 1, 1.0778}),
water(
r_V = {0,0.33333,0.5,0.666667,0.833333,1,1.333333},
f = {0,0.71,0.85,0.92,0.97,1,1.04}),
mAir_flow_nominal=0.0792,
mWat_flow_nominal = 0.094,
dpWat_nominal = 10000,
dpAir_nominal = 100,
dT_nominal = 27.8,
Q_flow_nominal = 2832)
"Performance data for Trox DID 632A for heating mode";