Buildings.Controls.OBC.CDL.Logical.Sources.Validation
Collection of models that validate the logical sources blocks of the CDL
Information
This package contains models that validate the blocks in Buildings.Controls.OBC.CDL.Logical.Sources.
The examples plot various outputs, which have been verified against analytical solutions. These model outputs are stored as reference data to allow continuous validation whenever models in the library change.
Package Content
| Name | Description |
|---|---|
 Constant
|
Validate the Constant block |
| Pulse
|
Validation model for the Boolean Pulse block |
| PulseNegativeStartTime
|
Validation model for the Boolean Pulse block with negative start time |
| PulsePositiveStartTime
|
Validation model for the Boolean Pulse block with positive, non-zero start time |
| SampleTrigger
|
Validation model for the SampleTrigger block |
| SampleTriggerNegativeStartTime
|
Validation model for the SampleTrigger block with a negative start time |
| SampleTriggerPositiveStartTime
|
Validation model for the SampleTrigger block with a positive start time |
| TimeTable
|
Validation model for TimeTable block |
| TimeTableNegativeStartTime
|
Validation model for TimeTable block with negative start time |
Buildings.Controls.OBC.CDL.Logical.Sources.Validation.Constant
Validate the Constant block
Information
Validation test for the block Buildings.Controls.OBC.CDL.Logical.Sources.Constant.
Modelica definition
model Constant
"Validate the Constant block"
Buildings.Controls.OBC.CDL.Logical.Sources.Constant con(
k=true)
"Block output boolean constant value";
end Constant;
Buildings.Controls.OBC.CDL.Logical.Sources.Validation.Pulse
Validation model for the Boolean Pulse block
Information
Validation test for the block Buildings.Controls.OBC.CDL.Logical.Sources.Pulse.
This validates the blocks with a start time of 0. All blocks with the same letter after the underscore are configured to produce the same output.
Modelica definition
model Pulse
"Validation model for the Boolean Pulse block"
Buildings.Controls.OBC.CDL.Logical.Sources.Pulse booPul_a1(
width=0.2,
period=2)
"Boolean pulse signal";
Buildings.Controls.OBC.CDL.Logical.Sources.Pulse booPul_b1(
width=0.2,
period=2,
shift=0.1)
"Boolean pulse signal";
Buildings.Controls.OBC.CDL.Logical.Sources.Pulse booPul_c1(
width=0.2,
period=2,
shift=0.6)
"Boolean pulse signal";
Buildings.Controls.OBC.CDL.Logical.Sources.Pulse booPul_a2(
width=0.2,
period=2,
shift=2)
"Boolean pulse signal";
Buildings.Controls.OBC.CDL.Logical.Sources.Pulse booPul_b2(
width=0.2,
period=2,
shift=2.1)
"Boolean pulse signal";
Buildings.Controls.OBC.CDL.Logical.Sources.Pulse booPul_c2(
width=0.2,
period=2,
shift=2.6)
"Boolean pulse signal";
Buildings.Controls.OBC.CDL.Logical.Sources.Pulse booPul_a3(
width=0.2,
period=2,
shift=4)
"Boolean pulse signal";
Buildings.Controls.OBC.CDL.Logical.Sources.Pulse booPul_b3(
width=0.2,
period=2,
shift=4.1)
"Boolean pulse signal";
Buildings.Controls.OBC.CDL.Logical.Sources.Pulse booPul_c3(
width=0.2,
period=2,
shift=4.6)
"Boolean pulse signal";
Buildings.Controls.OBC.CDL.Logical.Sources.Pulse booPul_a4(
width=0.2,
period=2,
shift=-2)
"Boolean pulse signal";
Buildings.Controls.OBC.CDL.Logical.Sources.Pulse booPul_b4(
width=0.2,
period=2,
shift=-1.9)
"Boolean pulse signal";
Buildings.Controls.OBC.CDL.Logical.Sources.Pulse booPul_c4(
width=0.2,
period=2,
shift=-1.4)
"Boolean pulse signal";
Buildings.Controls.OBC.CDL.Logical.Sources.Pulse booPul_a5(
width=0.2,
period=2,
shift=-4)
"Boolean pulse signal";
Buildings.Controls.OBC.CDL.Logical.Sources.Pulse booPul_b5(
width=0.2,
period=2,
shift=-3.9)
"Boolean pulse signal";
Buildings.Controls.OBC.CDL.Logical.Sources.Pulse booPul_c5(
width=0.2,
period=2,
shift=-3.4)
"Boolean pulse signal";
end Pulse;
Buildings.Controls.OBC.CDL.Logical.Sources.Validation.PulseNegativeStartTime
Validation model for the Boolean Pulse block with negative start time
Information
Validation test for the block Buildings.Controls.OBC.CDL.Logical.Sources.Pulse.
This validates the blocks with a start time of -10 seconds. All blocks with the same letter after the underscore are configured to produce the same output.
Modelica definition
model PulseNegativeStartTime
"Validation model for the Boolean Pulse block with negative start time"
Buildings.Controls.OBC.CDL.Logical.Sources.Pulse booPul_a1(
width=0.2,
period=2)
"Boolean pulse signal";
Buildings.Controls.OBC.CDL.Logical.Sources.Pulse booPul_b1(
width=0.2,
period=2,
shift=0.1)
"Boolean pulse signal";
Buildings.Controls.OBC.CDL.Logical.Sources.Pulse booPul_c1(
width=0.2,
period=2,
shift=0.6)
"Boolean pulse signal";
Buildings.Controls.OBC.CDL.Logical.Sources.Pulse booPul_a2(
width=0.2,
period=2,
shift=2)
"Boolean pulse signal";
Buildings.Controls.OBC.CDL.Logical.Sources.Pulse booPul_b2(
width=0.2,
period=2,
shift=2.1)
"Boolean pulse signal";
Buildings.Controls.OBC.CDL.Logical.Sources.Pulse booPul_c2(
width=0.2,
period=2,
shift=2.6)
"Boolean pulse signal";
Buildings.Controls.OBC.CDL.Logical.Sources.Pulse booPul_a3(
width=0.2,
period=2,
shift=4)
"Boolean pulse signal";
Buildings.Controls.OBC.CDL.Logical.Sources.Pulse booPul_b3(
width=0.2,
period=2,
shift=4.1)
"Boolean pulse signal";
Buildings.Controls.OBC.CDL.Logical.Sources.Pulse booPul_c3(
width=0.2,
period=2,
shift=4.6)
"Boolean pulse signal";
Buildings.Controls.OBC.CDL.Logical.Sources.Pulse booPul_a4(
width=0.2,
period=2,
shift=-2)
"Boolean pulse signal";
Buildings.Controls.OBC.CDL.Logical.Sources.Pulse booPul_b4(
width=0.2,
period=2,
shift=-1.9)
"Boolean pulse signal";
Buildings.Controls.OBC.CDL.Logical.Sources.Pulse booPul_c4(
width=0.2,
period=2,
shift=-1.4)
"Boolean pulse signal";
Buildings.Controls.OBC.CDL.Logical.Sources.Pulse booPul_a5(
width=0.2,
period=2,
shift=-4)
"Boolean pulse signal";
Buildings.Controls.OBC.CDL.Logical.Sources.Pulse booPul_b5(
width=0.2,
period=2,
shift=-3.9)
"Boolean pulse signal";
Buildings.Controls.OBC.CDL.Logical.Sources.Pulse booPul_c5(
width=0.2,
period=2,
shift=-3.4)
"Boolean pulse signal";
end PulseNegativeStartTime;
Buildings.Controls.OBC.CDL.Logical.Sources.Validation.PulsePositiveStartTime
Validation model for the Boolean Pulse block with positive, non-zero start time
Information
Validation test for the block Buildings.Controls.OBC.CDL.Logical.Sources.Pulse.
This validates the blocks with a start time of 9 seconds. All blocks with the same letter after the underscore are configured to produce the same output.
Modelica definition
model PulsePositiveStartTime
"Validation model for the Boolean Pulse block with positive, non-zero start time"
Buildings.Controls.OBC.CDL.Logical.Sources.Pulse booPul_a1(
width=0.2,
period=2)
"Boolean pulse signal";
Buildings.Controls.OBC.CDL.Logical.Sources.Pulse booPul_b1(
width=0.2,
period=2,
shift=0.1)
"Boolean pulse signal";
Buildings.Controls.OBC.CDL.Logical.Sources.Pulse booPul_c1(
width=0.2,
period=2,
shift=0.6)
"Boolean pulse signal";
Buildings.Controls.OBC.CDL.Logical.Sources.Pulse booPul_a2(
width=0.2,
period=2,
shift=2)
"Boolean pulse signal";
Buildings.Controls.OBC.CDL.Logical.Sources.Pulse booPul_b2(
width=0.2,
period=2,
shift=2.1)
"Boolean pulse signal";
Buildings.Controls.OBC.CDL.Logical.Sources.Pulse booPul_c2(
width=0.2,
period=2,
shift=2.6)
"Boolean pulse signal";
Buildings.Controls.OBC.CDL.Logical.Sources.Pulse booPul_a3(
width=0.2,
period=2,
shift=4)
"Boolean pulse signal";
Buildings.Controls.OBC.CDL.Logical.Sources.Pulse booPul_b3(
width=0.2,
period=2,
shift=4.1)
"Boolean pulse signal";
Buildings.Controls.OBC.CDL.Logical.Sources.Pulse booPul_c3(
width=0.2,
period=2,
shift=4.6)
"Boolean pulse signal";
Buildings.Controls.OBC.CDL.Logical.Sources.Pulse booPul_a4(
width=0.2,
period=2,
shift=-2)
"Boolean pulse signal";
Buildings.Controls.OBC.CDL.Logical.Sources.Pulse booPul_b4(
width=0.2,
period=2,
shift=-1.9)
"Boolean pulse signal";
Buildings.Controls.OBC.CDL.Logical.Sources.Pulse booPul_c4(
width=0.2,
period=2,
shift=-1.4)
"Boolean pulse signal";
Buildings.Controls.OBC.CDL.Logical.Sources.Pulse booPul_a5(
width=0.2,
period=2,
shift=-4)
"Boolean pulse signal";
Buildings.Controls.OBC.CDL.Logical.Sources.Pulse booPul_b5(
width=0.2,
period=2,
shift=-3.9)
"Boolean pulse signal";
Buildings.Controls.OBC.CDL.Logical.Sources.Pulse booPul_c5(
width=0.2,
period=2,
shift=-3.4)
"Boolean pulse signal";
end PulsePositiveStartTime;
Buildings.Controls.OBC.CDL.Logical.Sources.Validation.SampleTrigger
Validation model for the SampleTrigger block
Information
Validation test for the block
Buildings.Controls.OBC.CDL.Logical.Sources.SampleTrigger.
The instances samTri and samTri1 use a different value for the parameter shift.
Modelica definition
model SampleTrigger
"Validation model for the SampleTrigger block"
Buildings.Controls.OBC.CDL.Logical.Sources.SampleTrigger samTri(
period=0.5)
"Block that generates sample trigger signal";
Buildings.Controls.OBC.CDL.Continuous.Sources.Ramp ramp(
duration=5,
offset=0,
height=20)
"Block that generates ramp signal";
Buildings.Controls.OBC.CDL.Discrete.TriggeredSampler triggeredSampler
"Triggered sampler";
Buildings.Controls.OBC.CDL.Logical.Sources.SampleTrigger samTri1(
period=0.5,
shift=1.3)
"Block that generates sample trigger signal";
Buildings.Controls.OBC.CDL.Discrete.TriggeredSampler triggeredSampler1
"Triggered sampler";
equation
connect(ramp.y,triggeredSampler.u);
connect(samTri.y,triggeredSampler.trigger);
connect(samTri1.y,triggeredSampler1.trigger);
connect(triggeredSampler1.u,ramp.y);
end SampleTrigger;
Buildings.Controls.OBC.CDL.Logical.Sources.Validation.SampleTriggerNegativeStartTime
Validation model for the SampleTrigger block with a negative start time
Information
Validation test for the block
Buildings.Controls.OBC.CDL.Logical.Sources.SampleTrigger
with negative start time.
The instances samTri and samTri1 use a different value for the parameter shift.
Modelica definition
model SampleTriggerNegativeStartTime
"Validation model for the SampleTrigger block with a negative start time"
Buildings.Controls.OBC.CDL.Logical.Sources.SampleTrigger samTri(
period=0.5)
"Block that generates sample trigger signal";
Buildings.Controls.OBC.CDL.Continuous.Sources.Ramp ramp(
duration=5,
offset=0,
height=20,
startTime=-2)
"Block that generates ramp signal";
Buildings.Controls.OBC.CDL.Discrete.TriggeredSampler triggeredSampler
"Triggered sampler";
Buildings.Controls.OBC.CDL.Logical.Sources.SampleTrigger samTri1(
period=0.5,
shift=3.2)
"Block that generates sample trigger signal";
Buildings.Controls.OBC.CDL.Discrete.TriggeredSampler triggeredSampler1
"Triggered sampler";
equation
connect(ramp.y,triggeredSampler.u);
connect(samTri.y,triggeredSampler.trigger);
connect(samTri1.y,triggeredSampler1.trigger);
connect(triggeredSampler1.u,ramp.y);
end SampleTriggerNegativeStartTime;
Buildings.Controls.OBC.CDL.Logical.Sources.Validation.SampleTriggerPositiveStartTime
Validation model for the SampleTrigger block with a positive start time
Information
Validation test for the block
Buildings.Controls.OBC.CDL.Logical.Sources.SampleTrigger
with positive start time.
The instances samTri and samTri1 use a different value for the parameter shift.
Modelica definition
model SampleTriggerPositiveStartTime
"Validation model for the SampleTrigger block with a positive start time"
Buildings.Controls.OBC.CDL.Logical.Sources.SampleTrigger samTri(
period=0.5)
"Block that generates sample trigger signal";
Buildings.Controls.OBC.CDL.Continuous.Sources.Ramp ramp(
duration=5,
offset=0,
height=20)
"Block that generates ramp signal";
Buildings.Controls.OBC.CDL.Discrete.TriggeredSampler triggeredSampler
"Triggered sampler";
Buildings.Controls.OBC.CDL.Logical.Sources.SampleTrigger samTri1(
period=0.5,
shift=0.3)
"Block that generates sample trigger signal";
Buildings.Controls.OBC.CDL.Discrete.TriggeredSampler triggeredSampler1(
y_start=-2)
"Triggered sampler";
equation
connect(ramp.y,triggeredSampler.u);
connect(samTri.y,triggeredSampler.trigger);
connect(samTri1.y,triggeredSampler1.trigger);
connect(triggeredSampler1.u,ramp.y);
end SampleTriggerPositiveStartTime;
Buildings.Controls.OBC.CDL.Logical.Sources.Validation.TimeTable
Validation model for TimeTable block
Information
Validation test for the block Buildings.Controls.OBC.CDL.Logical.Sources.TimeTable.
Modelica definition
model TimeTable
"Validation model for TimeTable block"
Buildings.Controls.OBC.CDL.Logical.Sources.TimeTable booTimTab(
table=[
0,1,0;
1.3,1,1;
2.9,0,0;
4,1,0],
period=5)
"Time table with boolean output";
Buildings.Controls.OBC.CDL.Logical.Sources.TimeTable booTimTabOneRow(
table=[
0,1,0],
period=1)
"Time table with boolean output for a single table row";
Buildings.Controls.OBC.CDL.Logical.Sources.TimeTable booTimTabTwi(
table=[
0,1,0;
1.3,1,1;
2.9,0,0;
4,1,0],
period=10,
timeScale=2)
"Time table with boolean output, periodic repetition, and doubled time";
end TimeTable;
Buildings.Controls.OBC.CDL.Logical.Sources.Validation.TimeTableNegativeStartTime
Validation model for TimeTable block with negative start time
Information
This model validates the block Buildings.Controls.OBC.CDL.Logical.Sources.TimeTable. The model is identical to Buildings.Controls.OBC.CDL.Logical.Sources.Validation.TimeTable except that the start time is negative.
Modelica definition
model TimeTableNegativeStartTime
"Validation model for TimeTable block with negative start time"
Buildings.Controls.OBC.CDL.Logical.Sources.TimeTable booTimTab(
table=[
0,1,0;
1.3,1,1;
2.9,0,0;
4,1,0],
period=5)
"Time table with boolean output";
Buildings.Controls.OBC.CDL.Logical.Sources.TimeTable booTimTabOneRow(
table=[
0,1,0],
period=1)
"Time table with boolean output for a single table row";
Buildings.Controls.OBC.CDL.Logical.Sources.TimeTable booTimTabTwi(
table=[
0,1,0;
1.3,1,1;
2.9,0,0;
4,1,0],
period=10,
timeScale=2)
"Time table with boolean output, periodic repetition, and doubled time";
end TimeTableNegativeStartTime;