Buildings.UsersGuide.ReleaseNotes
Release notes
Information
This section summarizes the changes that have been performed on the Buildings library.
- Version 9.0.0 (May 31, 2022)
- Version 8.1.3 (May 31, 2022)
- Version 8.1.2 (May 26, 2022)
- Version 8.1.1 (May 12, 2022)
- Version 8.1.0 (December 9, 2021)
- Version 8.0.0 (June 8, 2021)
- Version 7.0.2 (December 9, 2021)
- Version 7.0.1 (June 4, 2021)
- Version 7.0.0 (May 28, 2020)
- Version 6.0.0 (July 15, 2019)
- Version 5.1.0 (June 14, 2018)
- Version 5.0.1 (November 22, 2017)
- Version 5.0.0 (November 17, 2017)
- Version 4.0.0 (March 29, 2017)
- Version 3.0.0 (March 29, 2016)
- Version 2.1.0 (July 13, 2015)
- Version 2.0.0 (May 4, 2015)
- Version 1.6 build1 (June 19, 2014)
- Version 1.5 build3 (February 12, 2014)
- Version 1.5 build2 (December 13, 2013)
- Version 1.5 build1 (October 24, 2013)
- Version 1.4 build1 (May 15, 2013)
- Version 1.3 build1 (January 8, 2013)
- Version 1.2 build1 (July 26, 2012)
- Version 1.1 build1 (February 29, 2012)
- Version 1.0 build2 (December 8, 2011)
- Version 1.0 build1 (November 4, 2011)
- Version 0.12.0 (May 6, 2011)
- Version 0.11.0 (March 17, 2011)
- Version 0.10.0 (July 30, 2010)
- Version 0.9.1 (June 24, 2010)
- Version 0.9.0 (June 11, 2010)
- Version 0.8.0 (February 6, 2010)
- Version 0.7.0 (September 29, 2009)
- Version 0.6.0 (May 15, 2009)
- Version 0.5.0 (February 19, 2009)
- Version 0.4.0 (October 31, 2008)
- Version 0.3.0 (September 30, 2008)
- Version 0.2.0 (June 17, 2008)
- Version 0.1.0 (May 27, 2008)
Extends from Modelica.Icons.ReleaseNotes (Icon for release notes in documentation).
Package Content
Name | Description |
---|---|
Version_9_0_0 | Version 9.0.0 |
Version_8_1_3 | Version 8.1.3 |
Version_8_1_2 | Version 8.1.2 |
Version_8_1_1 | Version 8.1.1 |
Version_8_1_0 | Version 8.1.0 |
Version_8_0_0 | Version 8.0.0 |
Version_7_0_2 | Version 7.0.2 |
Version_7_0_1 | Version 7.0.1 |
Version_7_0_0 | Version 7.0.0 |
Version_6_0_0 | Version 6.0.0 |
Version_5_1_0 | Version 5.1.0 |
Version_5_0_1 | Version 5.0.1 |
Version_5_0_0 | Version 5.0.0 |
Version_4_0_0 | Version 4.0.0 |
Version_3_0_0 | Version 3.0.0 |
Version_2_1_0 | Version 2.1.0 |
Version_2_0_0 | Version 2.0.0 |
Version_1_6_build1 | Version 1.6 build 1 |
Version_1_5_build3 | Version 1.5 build 3 |
Version_1_5_build2 | Version 1.5 build 2 |
Version_1_5_build1 | Version 1.5 build 1 |
Version_1_4_build1 | Version 1.4 build 1 |
Version_1_3_build1 | Version 1.3 build 1 |
Version_1_2_build1 | Version 1.2 build 1 |
Version_1_1_build1 | Version 1.1 build 1 |
Version_1_0_build2 | Version 1.0 build 2 |
Version_1_0_build1 | Version 1.0 build 1 |
Version_0_12_0 | Version 0.12.0 |
Version_0_11_0 | Version 0.11.0 |
Version_0_10_0 | Version 0.10.0 |
Version_0_9_1 | Version 0.9.1 |
Version_0_9_0 | Version 0.9.0 |
Version_0_8_0 | Version 0.8.0 |
Version_0_7_0 | Version 0.7.0 |
Version_0_6_0 | Version 0.6.0 |
Version_0_5_0 | Version 0.5.0 |
Version_0_4_0 | Version 0.4.0 |
Version_0_3_0 | Version 0.3.0 |
Version_0_2_0 | Version 0.2.0 |
Version_0_1_0 | Version 0.1.0 |
Buildings.UsersGuide.ReleaseNotes.Version_9_0_0
Version 9.0.0
Information
Version 9.0.0 is a major release that updates the Modelica version from 3.2.3 to 4.0.0.
The library has been tested with Dymola 2022x, OpenModelica 1.19.0-dev (613-gd6e04c0-1), OPTIMICA (revision 2022-05-09-master-4b0cd2bf71) and recent versions of Impact.
The following major changes have been done:
- The Modelica version has been updated from version 3.2.3 to 4.0.0.
-
Most fluid component models have been updated to remove the parameter
massDynamics
, which is now set to the same value as the parameterenergyDynamics
. -
The models for coupling with EnergyPlus have been moved to the package
Buildings.ThermalZones.EnergyPlus_9_6_0
to allow support for more than one EnergyPlus version in future releases. -
The BESTEST validation in the package
Buildings.ThermalZones.Detailed.Validation.BESTEST
has been updated to the latest BESTEST version, and new tests have been added. -
The package
Buildings.Fluid.Geothermal.BuriedPipes
has been added to model heat transfer between buried pipes and the ground, such as for district energy systems. -
The package
Buildings.Media.Steam
for modeling steam has been added. -
Various new models have been added to the package
Buildings.Airflow.Multizone
for modeling multizone air exchange. -
Models for ice tanks have been added to the package
Buildings.Fluid.Storage.Ice
. - Various models, such as for PV, solar collectors and thermal zones have been improved to obtain the latitude of the building from the weather data bus, rather than requiring the user to specify it.
-
The run-time coupling with Python has been updated to Python version 3.8,
and it has been renamed to
Buildings.Utilities.IO.Python_3_8
. - Various other models have been improved or added, in particular for modeling of control sequences using the Control Description Language that has been developed in the OpenBuildingControl project at https://obc.lbl.gov.
The following new libraries have been added:
Buildings.Fluid.Geothermal | |
Buildings.Fluid.Geothermal.BuriedPipes | Package with models for modeling thermal coupling between buried pipes and ground. |
Buildings.Media | |
Buildings.Media.Steam | Package with medium model for steam heating applications. |
The following new components have been added to existing libraries:
Buildings.ThermalZones.Detailed.Validation.BESTEST | |
Buildings.ThermalZones.Detailed.Validation.BESTEST.Case660 Buildings.ThermalZones.Detailed.Validation.BESTEST.Case670 Buildings.ThermalZones.Detailed.Validation.BESTEST.Case680 Buildings.ThermalZones.Detailed.Validation.BESTEST.Case680FF Buildings.ThermalZones.Detailed.Validation.BESTEST.Case685 Buildings.ThermalZones.Detailed.Validation.BESTEST.Case695 Buildings.ThermalZones.Detailed.Validation.BESTEST.Case910 Buildings.ThermalZones.Detailed.Validation.BESTEST.Case930 Buildings.ThermalZones.Detailed.Validation.BESTEST.Case980 Buildings.ThermalZones.Detailed.Validation.BESTEST.Case980FF Buildings.ThermalZones.Detailed.Validation.BESTEST.Case985 Buildings.ThermalZones.Detailed.Validation.BESTEST.Case995 |
Added new test cases based on the ASHRAE 140-2020. This is for #3005. |
Buildings.Air | |
Buildings.Air.Systems.SingleZone.VAV.Examples.OptimalStart | Added example models for the use of the block optimal start controller. This is for #2126. |
Buildings.Airflow.Multizone | |
Buildings.Airflow.Multizone.Coefficient_V_flow Buildings.Airflow.Multizone.Coefficient_m_flow Buildings.Airflow.Multizone.Point_m_flow Buildings.Airflow.Multizone.Points_m_flow Buildings.Airflow.Multizone.Table_V_flow Buildings.Airflow.Multizone.Table_m_flow |
Added new component models for multizone air exchange. This is for IBPSA, #1436. |
Buildings.Fluid | |
Buildings.Fluid.FixedResistances.PlugFlowPipeDiscretized | Added model for multiple plug flow pipes in series, which can be used to vary boundary conditions over the length of a pipe. |
Buildings.Fluid.Sources.Outside_CpData | Added new component model that allows specifying a wind pressure profile for an exterior construction. This is for IBPSA, #1436. |
Buildings.Controls.OBC.CDL | |
Buildings.Controls.OBC.CDL.Continuous.Asin Buildings.Controls.OBC.CDL.Continuous.Acos Buildings.Controls.OBC.CDL.Continuous.Subtract Buildings.Controls.OBC.CDL.Integers.Subtact |
Created new blocks based on the discussion from ASHRAE Standard 231P Committee. This is for #2865. |
Buildings.Controls.OBC.CDL.Continuous.Derivative | Created new block which is required for PID controller with gain scheduling. This is for #3022. |
Buildings.Controls.OBC.CDL.Integers.AddParameter | Created new block based on the discussion from ASHRAE Standard 231P Committee. This is for #2876. |
Buildings.Controls.OBC.RadiantSystems | |
Buildings.Controls.OBC.RadiantSystems.Cooling.HighMassSupplyTemperature_TSurRelHum | Added controller for radiant cooling that controls the surface temperature
using constant mass flow and variable supply temperature. This is for #2823. |
Buildings.Controls.OBC.Utilities | |
Buildings.Controls.OBC.Utilities.PIDWithInputGains | Added PID controller with anti-windup and control gains exposed as inputs. This is for #2993. |
Buildings.Fluid.Storage.Ice | |
Buildings.Fluid.Storage.Ice.ControlledTank Buildings.Fluid.Storage.Ice.Tank |
Added models for ice storage tank whose performance is characterized by performance curves. This is for #2820. |
The following existing components have been improved in a backward compatible way:
Buildings.HeatTransfer | |
Buildings.HeatTransfer.Windows.BaseClasses.CenterOfGlass | Changed the gas layer to be conditional. This is for #3026. |
Buildings.ThermalZones.Detailed.Validation.BESTEST | |
Buildings.ThermalZones.Detailed.Validation.BESTEST.Case600FF Buildings.ThermalZones.Detailed.Validation.BESTEST.Case640 Buildings.ThermalZones.Detailed.Validation.BESTEST.Case650 Buildings.ThermalZones.Detailed.Validation.BESTEST.Case650FF Buildings.ThermalZones.Detailed.Validation.BESTEST.Case950 Buildings.ThermalZones.Detailed.Validation.BESTEST.Case950FF |
Updated the test cases based on the ASHRAE 140-2020. This is for #3005. |
Buildings.Applications.DataCenters | |
Buildings.Applications.DataCenters.ChillerCooled.Equipment.BaseClasses.AHUParameters Buildings.Applications.DataCenters.ChillerCooled.Equipment.BaseClasses.PartialCoolingCoilHumidifyingHeating |
Changed cooling coil model and removed unused parameters. This is for #2549. |
Buildings.BoundaryConditions | |
Buildings.BoundaryConditions.WeatherData.ReaderTMY3 | The weather data reader is now reading the altitude above sea level from the weather data file.
This new version also outputs this altitude and the latitude of the location on the weather data bus. This is for IBPSA, #1477. |
Buildings.Controls.Continuous | |
Buildings.Controls.Continuous.SignalRanker | Changed implementation to use sort function from Modelica Standard Library,
and updated its example to avoid simultaneous state and time events. This is for IBPSA, #1534. |
Buildings.Controls.OBC.ASHRAE | |
Buildings.Controls.OBC.ASHRAE.G36_PR1.Generic.SetPoints.GroupStatus | Added filters to select which zones are used in group. This is for # 2544. |
Buildings.Controls.OBC.CDL | |
Buildings.Controls.OBC.CDL.Continuous.Sources.CalendarTime | Increased number of years that block will output the calendar time. This is for issue 2942. |
Buildings.Controls.OBC.CDL.Conversions.BooleanToInteger Buildings.Controls.OBC.CDL.Conversions.BooleanToReal |
Corrected documentation texts where the variables were described with wrong types. This is for issue 3016. |
Buildings.Controls.OBC.CDL.Discrete.TriggeredMovingMean |
Added missing discrete keyword to sampled variable.This is for issue 2942. |
Buildings.Controls.OBC.CDL.Utilities.SunRiseSet | Changed implementation to avoid NaN in OpenModelica. This is for issue 2835. |
Buildings.Electrical.AC.ThreePhasesUnbalanced | |
Buildings.Electrical.AC.ThreePhasesUnbalanced.Lines.Line Buildings.Electrical.AC.ThreePhasesUnbalanced.Lines.Line_N Buildings.Electrical.AC.ThreePhasesUnbalanced.Lines.TwoPortMatrixRLC Buildings.Electrical.AC.ThreePhasesUnbalanced.Lines.TwoPortMatrixRLC_N Buildings.Electrical.AC.ThreePhasesUnbalanced.Lines.TwoPortMatrixRL_N Buildings.Electrical.AC.ThreePhasesUnbalanced.Lines.TwoPortRLC Buildings.Electrical.AC.ThreePhasesUnbalanced.Lines.TwoPortRLC_N |
Set nominal attribute for voltage at terminal.
This change enables Dymola 2023 beta3 to solve
Buildings.Electrical.AC.ThreePhasesUnbalanced.Validation.IEEETests.Test4NodesFeeder.UnbalancedStepDown.DY
and
Buildings.Electrical.AC.ThreePhasesUnbalanced.Validation.IEEETests.Test4NodesFeeder.UnbalancedStepUp.DD
which otherwise fail during the initialization as the homotopy steps
obtain unreasonable values for the voltages.
|
Buildings.Fluid.Boilers | |
Buildings.Fluid.Boilers.Data.Lochinvar | Added annotation defaultComponentPrefixes = "parameter" .
|
Buildings.Fluid.Boilers.Polynomial | Moved part of the code to Buildings.Fluid.Boilers.BaseClasses.PartialBoiler
to support the new model Buildings.Fluid.Boilers.BoilerTable . This is for # 2651. |
Buildings.Fluid.HeatExchangers | |
Buildings.Fluid.HeatExchangers.PlateHeatExchangerEffectivenessNTU | Exposed ratio of convection coefficients, set its default values based on fluid properties and flow rates,
and exposed exponents for convective heat transfer coefficients. This is for #2918. |
Buildings.Fluid.HeatPumps | |
Buildings.Fluid.HeatPumps.Data.EquationFitReversible.Generic | Removed protected declaration inside the record as the Modelica Language Specification
only allows public sections in a record.This is for #3009. |
Buildings.Examples | |
Buildings.Examples.VAVReheat.Controls.DuctStaticPressureSetpoint | Removed hysteresis that disabled duct static pressure reset based on outdoor air temperature. This is for #2545. |
Buildings.Examples.VAVReheat.Validation.BaseClasses.Floor | Update CO2 generation expressions. This is for #2781. |
Buildings.Examples.VAVReheat.BaseClasses.Controls.FreezeStat | Added hysteresis. Without it, models can stall due to state events. This is for #2975. |
Buildings.Examples.DualFanDualDuct.ClosedLoop Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone Buildings.Examples.VAVReheat.BaseClasses.PartialOpenLoop |
Changed cooling coil model. This is for #2549. |
Buildings.Examples.Tutorial.Boiler.System7 | Changed block downstream of greThrTRoo from and to or block.
This ensures that the system is off when the outdoor air or room air is sufficiently warm.
|
Buildings.Examples.Tutorial.SpaceCooling.System2 Buildings.Examples.Tutorial.SpaceCooling.System3 |
Correct supply and return water parameterization. Use design conditions for UA parameterization in cooling coil. Use explicit calculation of sensible and latent load to determine design load on cooling coil. This is for #2624. |
Buildings.Examples.ChillerPlant.BaseClasses.DataCenter | Set nominalValuesDefaultPressureCurve=true to avoid warnings.This is for Buildings, #2761. |
Buildings.Experimental.DHC | |
Buildings.Experimental.DHC.Plants.Cooling | Revised the model for extensibility. This is for #2749. |
Buildings.Fluid.Actuators | |
Buildings.Fluid.Movers.FlowControlled_dp Buildings.Fluid.Movers.FlowControlled_m_flow Buildings.Fluid.Movers.SpeedControlled_Nrpm Buildings.Fluid.Movers.SpeedControlled_y |
Changed implementation of the filter.
The new implementation uses a simpler model. This is for IBPSA #1498. |
Buildings.Fluid.FMI | |
Buildings.Fluid.FMI.ExportContainers.HVACZone Buildings.Fluid.FMI.ExportContainers.HVACZones |
Correct supply and return water parameterization. Use explicit calculation of sensible and latent load to determine design load on cooling coil. This is for #2624. |
Buildings.Fluid.FMI.ExportContainers.Validation.RoomHVAC | Changed cooling coil model. This is for #2549. Correct supply and return water parameterization. Use explicit calculation of sensible and latent load to determine design load on cooling coil. This is for #2624. |
Buildings.Fluid.HeatExchangers | |
Buildings.Fluid.HeatExchangers.CoolingTowers.Examples.BaseClasses.PartialStaticTwoPortCoolingTower | Added a temperature sensor for better measurement of the entering water temperature. This is for #2866. |
Buildings.Media | |
Buildings.Media.Air | Made the BaseProperties replaceable.This is for IBPSA #1516. |
Buildings.ThermalZones.ReducedOrder | |
Buildings.ThermalZones.ReducedOrder.Validation.VDI6007.BaseClasses.VerifyDifferenceThreePeriods | Improved model to guard against approximation errors of event handling.
With this change, the models in Buildings.ThermalZones.ReducedOrder.Validation.VDI6007
all simulate with OpenModelica.This is for Buidings, #2713. |
Buildings.Utilities.IO | |
Buildings.Utilities.IO.Files.Examples.CSVReader | Updated example so it works with future versions of the Modelica Standard Library which
supports reading csv files. This is for IBPSA #1572. |
Buildings.Utilities.Math | |
Buildings.Utilities.Math.Functions.BaseClasses.der_spliceFunction | Reimplemented function to avoid a potential overflow caused by the cosh function.This is for IBPSA #1531. |
Buildings.Experimental.DHC | |
Buildings.Experimental.DHC.Plants.Cooling.Subsystems.Examples.BaseClasses.PartialCoolingTowersSubsystem | Added a temperature sensor for better measurement of the entering water temperature. This is for #2866. |
The following existing components have been improved in a non-backward compatible way:
Buildings.Applications | |
Buildings.Applications.DataCenters.ChillerCooled.Equipment.FlowMachine_y Buildings.Applications.DataCenters.ChillerCooled.Equipment.FlowMachine_m Buildings.Applications.DataCenters.ChillerCooled.Equipment.ElectricChillerParallel Buildings.Applications.DataCenters.ChillerCooled.Controls.VariableSpeedPumpStage |
Moved to Buildings.Applications.BaseClasses .This is for # 2264. This change is supported in the conversion script. |
Buildings.BoundaryConditions | |
Buildings.BoundaryConditions.SolarGeometry.IncidenceAngle Buildings.BoundaryConditions.SolarGeometry.BaseClasses.IncidenceAngle Buildings.BoundaryConditions.SolarGeometry.ZenithAngle Buildings.BoundaryConditions.SolarIrradiation.DiffusePerez Buildings.BoundaryConditions.SolarIrradiation.DirectTiltedSurface Buildings.BoundaryConditions.SolarGeometry.BaseClasses.SolarAzimuth |
Removed parameter lat for the latitude as this is now obtained from the weather data bus.This is for IBPSA, #1477. This change is supported in the conversion script. |
Buildings.BoundaryConditions.SolarIrradiation.BaseClasses.RelativeAirMass | Introduced altitude attenuation for relative air mass calculation.
This required adding a new input. This is for IBPSA, #1477. |
Buildings.BoundaryConditions.SolarIrradiation.BaseClasses.SkyClearness | Changed input connector HGloHor to HDirHor .This is for IBPSA, #1477. |
Buildings.Controls.Continuous | |
Buildings.Controls.Continuous.PIDHysteresisTimer Buildings.Controls.Continuous.PIDHysteresis |
Moved blocks to Buildings.Obsolete.Controls.Continuous .This is for IBPSA, #1522. This change is supported in the conversion script. |
Buildings.Controls.OBC.CDL | |
Buildings.Controls.OBC.CDL.Continuous.Add Buildings.Controls.OBC.CDL.Integers.Add Buildings.Controls.OBC.CDL.Continuous.AddParameter |
Moved classes to Obsolete package and created new blocks to avoid using input gain factor.
This is for #2865 and
#2876.This change is supported in the conversion script. |
Buildings.Controls.OBC.CDL.Continuous.Feedback | Moved the class to Obsolete package.
This is for #2865.This change is supported in the conversion script. |
Buildings.Controls.OBC.CDL.Continuous.Division Buildings.Controls.OBC.CDL.Continuous.Gain Buildings.Controls.OBC.CDL.Continuous.MovingMean Buildings.Controls.OBC.CDL.Continuous.Product Buildings.Controls.OBC.CDL.Integers.Product Buildings.Controls.OBC.CDL.Continuous.SlewRateLimiter |
Renamed the blocks to Divide , MultiplyByParameter , MovingAverage ,
Multiply , LimitSlewRate .
This is for #2865.This change is supported in the conversion script. |
Buildings.Controls.OBC.CDL.Interfaces.DayTypeInput Buildings.Controls.OBC.CDL.Interfaces.DayTypeOutput Buildings.Controls.OBC.CDL.Discrete.DayType Buildings.Controls.OBC.CDL.Conversions.IsHoliday Buildings.Controls.OBC.CDL.Conversions.IsWorkingDay Buildings.Controls.OBC.CDL.Conversions.IsNonWorkingDay Buildings.Controls.OBC.CDL.Discrete.Examples.DayType Buildings.Controls.OBC.CDL.Conversions.Validation.DayTypeCheck Buildings.Controls.OBC.CDL.Types.Day |
Moved classes to Obsolete package.
This is for #2839.This change is supported in the conversion script. |
Buildings.Controls.OBC.CDL.Logical.MultiAnd Buildings.Controls.OBC.CDL.Logical.MultiOr |
Renamed parameter nu to nin .
This is for #2580.This change is supported in the conversion script. |
Buildings.Controls.OBC.CDL.Routing.BooleanReplicator Buildings.Controls.OBC.CDL.Routing.IntegerReplicator Buildings.Controls.OBC.CDL.Routing.RealReplicator |
Renamed to include BooleanScalarReplicator , IntegerScalarReplicator ,
and RealScalarReplicator .This is for #2544. This change is supported in the conversion script. |
Buildings.Controls.OBC.CDL.Logical.IntegerSwitch Buildings.Controls.OBC.CDL.Logical.LogicalSwitch Buildings.Controls.OBC.CDL.Logical.Switch |
Moved the blocks to CDL.Integers.Switch , CDL.Logical.Switch ,
and CDL.Continuous.Switch .This is for #2650. This change is supported in the conversion script. |
Buildings.Controls.OBC.CDL.Integers.Change | Renamed parameter for start value from y_start to pre_u_start
for consistency with Buildings.Controls.OBC.CDL.Logical.Change .This is for #2990. This change is supported in the conversion script. |
Buildings.Electrical | |
Buildings.Electrical.AC.ThreePhasesUnbalanced.Sources.PVsimpleOriented Buildings.Electrical.AC.ThreePhasesUnbalanced.Sources.PVsimpleOriented_N Buildings.Electrical.DC.Sources.PVSimpleOriented Buildings.Electrical.AC.OnePhase.Sources.PVSimpleOriented Buildings.Electrical.AC.ThreePhasesBalanced.Sources.PVSimpleOriented Buildings.Electrical.DC.Sources.PVSimpleOriented Buildings.Electrical.Interfaces.PartialPVOriented |
Removed parameter lat for the latitude as this is now obtained from the weather data bus.This is for IBPSA, #1477. This change is supported in the conversion script. |
Buildings.Examples.VAVReheat | |
Buildings.Examples.VAVReheat.ASHRAE2006 Buildings.Examples.VAVReheat.Guideline36 Buildings.Examples.VAVReheat.BaseClasses.PartialOpenLoop |
Changed models to include the hydraulic configurations of the cooling coil,
heating coil and VAV terminal box. Changed heating supply water temperature at design condition to 45°C. Corrected implementation of freeze protection for ASHRAE 2006 models. This is for #2594. Changed model structure to separate building and HVAC system. This is for #2652. Changed parameter declarations and added to Guideline 36 models the optimal start up calculation. This is for issue #2829. |
Buildings.Examples.ScalableBenchmarks | |
Buildings.Examples.ScalableBenchmarks.BuildingVAV.ThermalZones.ThermalZone | Reimplemented computation of energy provided by HVAC system to also include the latent load.
The new implementation uses the enthalpy sensor, and therefore the mass flow rate and temperature
sensors have been removed. Also, rather than load in Watts, it outputs the energy in Joules. This version also improves the infiltration. Now, exactly the same amount of air in infiltrated and exfiltrated. This was not the case previously because the infiltration was a prescribed air flow rate, and the exfiltration was based on pressure difference. This caused an inbalance in the HVAC supply and return air flow rate. |
Buildings.Fluid.Actuators | |
Buildings.Fluid.Actuators.Dampers.Exponential Buildings.Fluid.Actuators.Dampers.MixingBox Buildings.Fluid.Actuators.Dampers.MixingBoxMinimumFlow Buildings.Fluid.Actuators.Dampers.PressureIndependent Buildings.Fluid.Actuators.Valves.ThreeWayEqualPercentageLinear Buildings.Fluid.Actuators.Valves.ThreeWayLinear Buildings.Fluid.Actuators.Valves.ThreeWayTable Buildings.Fluid.Actuators.Valves.TwoWayEqualPercentage Buildings.Fluid.Actuators.Valves.TwoWayLinear Buildings.Fluid.Actuators.Valves.TwoWayPolynomial Buildings.Fluid.Actuators.Valves.TwoWayPressureIndependent Buildings.Fluid.Actuators.Valves.TwoWayQuickOpening Buildings.Fluid.Actuators.Valves.TwoWayTable |
Changed implementation of the filter and changed the parameter order to be a constant
because typical users have no need to change this value.
The new implementation uses a simpler model.This is for IBPSA #1498. This change is only backwards incompatible if a user propagated the value of order to a high-level parameter.
|
Buildings.Fluid.FixedResistances | |
Buildings.Fluid.FixedResistances.PlugFlowPipe Buildings.Fluid.FixedResistances.BaseClasses.PlugFlowCore |
In Buildings.Fluid.FixedResistances.PlugFlowPipe , changed ports_b ,
which was a vectorized port, to port_b which is a scalar port.
This has been done in order for the model to have the same connectors as
are used for other pipe models.Refactored implementation and made various classes in this model protected. This is for IBPSA #1494. For Dymola, a conversion script renames existing models to Buildings.Obsolete.Fluid.FixedResistances.PlugFlowPipe and
Buildings.Obsolete.Fluid.FixedResistances.BaseClasses.PlugFlowCore .
|
Buildings.Fluid.Movers | |
Buildings.Fluid.Movers.FlowControlled_dp Buildings.Fluid.Movers.FlowControlled_m_flow |
Removed parameter y_start which is not needed by this model because the models
use dp_start and m_flow_start , respectively.This is for IBPSA #1498. This change is supported in the conversion script. |
Buildings.Fluid.SolarCollectors | |
Buildings.Fluid.SolarCollectors.EN12975 Buildings.Fluid.SolarCollectors.ASHRAE93 |
Removed parameter lat for the latitude as this is now obtained from the weather data bus.This is for IBPSA, #1477. This change is supported in the conversion script. |
Buildings.Fluid.Storage | |
Buildings.Fluid.Storage.ExpansionVessel | Removed parameter p which was not used.This is for IBPSA, #1614. This change is supported in the conversion script. |
Buildings.HeatTransfer.Windows | |
Buildings.HeatTransfer.Windows.FixedShade Buildings.HeatTransfer.Windows.Overhang Buildings.HeatTransfer.Windows.BaseClasses.Overhang |
Removed parameter lat for the latitude as this is now obtained from the weather data bus.This is for IBPSA, #1477. This change is supported in the conversion script. |
Buildings.Obsolete | |
Buildings.Obsolete.Utilities.IO.Python27 | Removed support for Python 27. Use instead Buildings.Utilities.IO.Python36 .
|
Buildings.ThermalZones.Detailed | |
Buildings.ThermalZones.Detailed.MixedAir Buildings.ThermalZones.Detailed.CFD Buildings.ThermalZones.Detailed.BaseClasses.ExteriorBoundaryConditions Buildings.ThermalZones.Detailed.BaseClasses.ExteriorBoundaryConditionsWithWindow Buildings.ThermalZones.Detailed.Validation.BaseClasses.SingleZoneFloor |
Removed parameter lat for the latitude as this is now obtained from the weather data bus.This is for IBPSA, #1477. This change is supported in the conversion script. |
Buildings.ThermalZones.Detailed.MixedAir | Set final massDynamics=energyDynamic .This is for IBPSA, #1542. This change is supported in the conversion script. |
Buildings.ThermalZones.EnergyPlus_9_6_0 | |
Buildings.ThermalZones.EnergyPlus_9_6_0 | Renamed package to add the version number for EnergyPlus. This will allow supporting more than
one version of EnergyPlus. This is for #2851. |
Buildings.ThermalZones.EnergyPlus_9_6_0.Building | This model, which needs to be part of every model that uses EnergyPlus, now
requires the specification of the EnergyPlus weather data file (.epw file)
through the parameter epwName .This is for #2443. Removed the parameters showWeatherData and generatePortableFMU .
Now, the weather data bus is always enabled as it is used in almost all simulations.
This change is supported in the conversion script.Converted usePrecompiledFMU and the associated fmuName from
parameter to a constant as these are only used for debugging by developers.This is for #2759. |
Buildings.ThermalZones.EnergyPlus_9_6_0.Examples.SmallOffice.ASHRAE2006Spring Buildings.ThermalZones.EnergyPlus_9_6_0.Examples.SmallOffice.ASHRAE2006Summer Buildings.ThermalZones.EnergyPlus_9_6_0.Examples.SmallOffice.ASHRAE2006Winter Buildings.ThermalZones.EnergyPlus_9_6_0.Examples.SmallOffice.Guideline36Spring Buildings.ThermalZones.EnergyPlus_9_6_0.Examples.SmallOffice.Guideline36Summer Buildings.ThermalZones.EnergyPlus_9_6_0.Examples.SmallOffice.Guideline36Winter |
Changed models to include the hydraulic configurations of the cooling coil,
heating coil and VAV terminal box. This is for #2594. Changed model structure to separate building and HVAC system. This is for #2652. Changed parameter declarations and added to Guideline 36 models the optimal start up calculation. This is for issue #2829. |
Buildings.Utilities.IO | |
Buildings.Utilities.IO.Python36 | Replaced package with Buildings.Utilities.IO.Python_3_8
and moved the old package to Buildings.Obsolete.Utilities.IO.Python36 .This is for #2599. For Dymola, a conversion script will rename models that use Python36
to use Python_3_8 .
|
Buildings.Utilities.Math | |
Buildings.Utilities.Math.Polynominal Buildings.Utilities.Math.Examples.Polynominal |
Corrected name to Polynomial .This is for IBPSA, #1524. This change is supported in the conversion script. |
The following critical errors have been fixed (i.e., errors that can lead to wrong simulation results):
Buildings.Controls.OBC.CDL | |
Buildings.Controls.OBC.CDL.Continuous.Greater Buildings.Controls.OBC.CDL.Continuous.GreaterThreshold Buildings.Controls.OBC.CDL.Continuous.Less Buildings.Controls.OBC.CDL.Continuous.LessThreshold |
Corrected the condition of switching true back to false. It is caused by the wrong inequality check. This is for #2981. |
Buildings.Experimental.DHC | |
Buildings.Experimental.DHC.Examples.Combined.ParallelConstantFlow | Removed the model that represented an incorrect hydronic configuration. This is for #2967. |
Buildings.Fluid.Chillers | |
Buildings.Fluid.Chillers.BaseClasses.PartialElectric | Corrected calculation of entering condenser temperature
when using a moist air media model.
This is important for modeling air-cooled chillers using the model
Buildings.Fluid.Chillers.ElectricEIR
This is for #2770. |
Buildings.Fluid.HeatExchangers | |
Buildings.Fluid.HeatExchangers.WetCoilCounterFlow Buildings.Fluid.HeatExchangers.WetCoilDiscretized |
Corrected removal of latent heat from component. This is for #3027. |
Buildings.Occupants | |
Buildings.Occupants.Office.Occupancy.Wang2005Occupancy | Reformulated model so it works also if the simulation does not start at 0. To improve efficiency, this reformulation also changes the event triggering function so that it leads to time events rather than state events. This is for #2590. |
The following uncritical errors have been fixed (i.e., errors that do not lead to wrong simulation results, e.g., units are wrong or errors in documentation):
Buildings.Airflow | |
Buildings.Airflow.Multizone.DoorOperable | Removed duplicate declaration of VABp_flow .This is for Buildings, #1496. |
Buildings.Applications.DataCenters | |
Buildings.Applications.DataCenters.ChillerCooled.Equipment.Validation.IntegratedPrimaryLoadSide | Removed duplicate instances of blocks that generate control signals. This is for Buildings, issue 2963. |
Buildings.Applications.DataCenters.ChillerCooled.Examples.IntegratedPrimaryLoadSideEconomizer Buildings.Applications.DataCenters.ChillerCooled.Examples.IntegratedPrimarySecondaryEconomizer Buildings.Applications.DataCenters.ChillerCooled.Examples.NonIntegratedPrimarySecondaryEconomizer |
Corrected weather data bus connection which was structurally incorrect
and did not parse in OpenModelica. This is for Buildings, issue 2706. |
Buildings.Controls.OBC.CDL | |
Buildings.Controls.OBC.CDL.PID Buildings.Controls.OBC.CDL.PIDWithReset |
Corrected wrong documentation in how the derivative of the control error is approximated. This is for Buildings, issue 2994. |
Buildings.Electrical | |
Buildings.Electrical.AC.OnePhase.Sources.PVSimple Buildings.Electrical.AC.OnePhase.Sources.PVSimpleOriented Buildings.Electrical.AC.ThreePhasesBalanced.Sources.PVSimple Buildings.Electrical.AC.ThreePhasesBalanced.Sources.PVSimpleOriented Buildings.Electrical.AC.ThreePhasesUnbalanced.Sources.PVsimple Buildings.Electrical.AC.ThreePhasesUnbalanced.Sources.PVsimple Buildings.Electrical.AC.ThreePhasesUnbalanced.Sources.PVsimpleOriented Buildings.Electrical.AC.ThreePhasesUnbalanced.Sources.PVsimpleOriented_N Buildings.Electrical.DC.Sources.PVSimple Buildings.Electrical.DC.Sources.PVSimpleOriented Buildings.Electrical.Interfaces.PartialPvBase |
Corrected wrong documentation string for surface area which should be gross rather than net area. |
Buildings.Experimental | |
Buildings.Experimental.DHC.Plants.Cooling.Controls.ChillerStage | Corrected parameter value for twoOn.nOut .
This correction is required to simulate the model in Dymola 2022
if the model has been updated to MSL 4.0.0. With MSL 3.2.3, the simulation
works without this correction.This is for Buildings, #1563. |
Buildings.Media | |
Buildings.Media.Specialized.Water.TemperatureDependentDensity | Corrected assignment of gas constant which lead to a unit error.
This change does not affect the results as the value is not used for this liquid medium. This is for IBPSA, #1603. |
Buildings.ThermalZones.Detailed | |
Buildings.ThermalZones.Detailed.BaseClasses.RadiationTemperature | Corrected annotation. This is for Buildings, #2550. |
Buildings.ThermalZones.Detailed.Constructions.Examples.ExteriorWallTwoWindows Buildings.ThermalZones.Detailed.Constructions.Examples.ExteriorWallWithWindow Buildings.ThermalZones.Detailed.FLEXLAB.Rooms.X3B.Electrical Buildings.ThermalZones.Detailed.Validation.BESTEST.Cases6xx.Case600FF |
Added missing parameter declaration. This is for Buildings, #2556. |
Buildings.Utilities.IO.Python_3_8 | |
Buildings.Utilities.IO.Python_3_8.Functions.Examples.Exchange | Removed call to impure function removeFile .
This removal is required for MSL 4.0.0.This is for Buildings, #1563. |
Extends from Modelica.Icons.ReleaseNotes (Icon for release notes in documentation).
Modelica definition
Buildings.UsersGuide.ReleaseNotes.Version_8_1_3
Version 8.1.3
Information
Version 8.1.3 is a patch that has backward compatible bug fixes. It is backwards compatible with versions 8.0.0, 8.1.0, 8.1.1 and 8.1.2.
The library has been tested with Dymola 2022, JModelica (revision 14023), OpenModelica 1.19.0-dev (449+g4f16e6af22), OPTIMICA (revision OCT-dev-r26446_JM-r14295) and recent versions of Impact.
The following critical errors have been fixed (i.e., errors that can lead to wrong simulation results):
Buildings.Fluid.HeatExchangers | |
Buildings.Fluid.HeatExchangers.WetCoilCounterFlow Buildings.Fluid.HeatExchangers.WetCoilDiscretized |
Corrected removal of latent heat from component. This is for #3027. |
Extends from Modelica.Icons.ReleaseNotes (Icon for release notes in documentation).
Modelica definition
Buildings.UsersGuide.ReleaseNotes.Version_8_1_2
Version 8.1.2
Information
Version 8.1.2 is a patch that has backward compatible bug fixes. It is backwards compatible with versions 8.0.0, 8.1.0 and 8.1.1.
The library has been tested with Dymola 2022, JModelica (revision 14023), OpenModelica 1.19.0-dev (449+g4f16e6af22), OPTIMICA (revision OCT-dev-r26446_JM-r14295) and recent versions of Impact.
The following existing components have been improved in a backward compatible way:
Buildings.HeatTransfer | |
Buildings.HeatTransfer.Windows.BaseClasses.CenterOfGlass | Changed the gas layer to be conditional. This is for #3026. |
Buildings.Fluid | |
Buildings.Fluid.Boilers.Data.Lochinvar | Added annotation defaultComponentPrefixes = "parameter" .
|
Buildings.Fluid.HeatPumps.Data.EquationFitReversible.Generic | Removed protected declaration inside the record as the Modelica Language Specification
only allows public sections in a record.This is for #3009. |
The following uncritical errors have been fixed (i.e., errors that do not lead to wrong simulation results, e.g., units are wrong or errors in documentation):
Buildings.Controls | |
Buildings.Controls.OBC.CDL.Conversions.BooleanToInteger Buildings.Controls.OBC.CDL.Conversions.BooleanToReal |
Corrected documentation texts where the variables were described with wrong types. This is for #3016. |
Extends from Modelica.Icons.ReleaseNotes (Icon for release notes in documentation).
Modelica definition
Buildings.UsersGuide.ReleaseNotes.Version_8_1_1
Version 8.1.1
Information
Version 8.1.1 is a patch that has backward compatible bug fixes. It is backwards compatible with version 8.0.0 and 8.1.0.
The library has been tested with Dymola 2022, JModelica (revision 14023), OpenModelica 1.19.0-dev (449+g4f16e6af22), OPTIMICA (revision OCT-dev-r26446_JM-r14295) and recent versions of Impact.
The following existing components have been improved in a backward compatible way:
Buildings.Examples.VAVReheat | |
Buildings.Examples.VAVReheat.BaseClasses.Controls.FreezeStat | Added hysteresis. Without it, models can stall due to state events. This is for #2975. |
Buildings.Controls.OBC | |
Buildings.Controls.OBC.Utilities.SunRiseSet | Changed implementation to avoid NaN in OpenModelica. This is for issue 2835. |
Buildings.Electrical.AC.ThreePhasesUnbalanced.Lines.Line Buildings.Electrical.AC.ThreePhasesUnbalanced.Lines.Line_N Buildings.Electrical.AC.ThreePhasesUnbalanced.Lines.TwoPortMatrixRLC Buildings.Electrical.AC.ThreePhasesUnbalanced.Lines.TwoPortMatrixRLC_N Buildings.Electrical.AC.ThreePhasesUnbalanced.Lines.TwoPortMatrixRL_N Buildings.Electrical.AC.ThreePhasesUnbalanced.Lines.TwoPortRLC Buildings.Electrical.AC.ThreePhasesUnbalanced.Lines.TwoPortRLC_N |
Set nominal attribute for voltage at terminal.
This change enables Dymola 2023 beta3 to solve
Buildings.Electrical.AC.ThreePhasesUnbalanced.Validation.IEEETests.Test4NodesFeeder.UnbalancedStepDown.DY
and
Buildings.Electrical.AC.ThreePhasesUnbalanced.Validation.IEEETests.Test4NodesFeeder.UnbalancedStepUp.DD
which otherwise fail during the initialization as the homotopy steps
obtain unreasonable values for the voltages.
|
Buildings.ThermalZones.EnergyPlus | |
Buildings.ThermalZones.EnergyPlus | Changed handling of forward and backward slashes on Windows. Now models in this package also work with OpenModelica on Windows. |
The following critical errors have been fixed (i.e., errors that can lead to wrong simulation results):
Buildings.Experimental.DHC | |
Buildings.Experimental.DHC.Examples.Combined.ParallelConstantFlow | Removed the model that represented an incorrect hydronic configuration. This is for #2967. |
The following uncritical errors have been fixed (i.e., errors that do not lead to wrong simulation results, e.g., units are wrong or errors in documentation):
Buildings.Applications | |
Buildings.Applications.DataCenters.ChillerCooled.Equipment.Validation.IntegratedPrimaryLoadSide | Removed duplicate instances of blocks that generate control signals. This is for Buildings, issue 2963. |
Buildings.Controls.OBC.CDL | |
Buildings.Controls.OBC.CDL.PID Buildings.Controls.OBC.CDL.PIDWithReset |
Corrected wrong documentation in how the derivative of the control error is approximated. This is for Buildings, issue 2994. |
Buildings.Experimental | |
Buildings.Experimental.DHC.CentralPlants.Cooling.Controls.ChillerStage | Corrected parameter value for twoOn.nOut .
This correction is required to simulate the model in Dymola 2022
if the model has been updated to MSL 4.0.0. With MSL 3.2.3, the simulation
works without this correction.This is for Buildings, #1563. |
Buildings.Media | |
Buildings.Media.Specialized.Water.TemperatureDependentDensity | Corrected assignment of gas constant which lead to a unit error.
This change does not affect the results as the value is not used for this liquid medium. This is for IBPSA, #1603. |
Buildings.Utilities.IO.Python36 | |
Buildings.Utilities.IO.Python36.Functions.Examples.Exchange | Removed call to impure function removeFile .
This removal is required for MSL 4.0.0.This is for Buildings, #1563. |
Extends from Modelica.Icons.ReleaseNotes (Icon for release notes in documentation).
Modelica definition
Buildings.UsersGuide.ReleaseNotes.Version_8_1_0
Version 8.1.0
Information
Version 8.1.0 is a minor release that is backwards compatible with version 8.0.0. The library has been tested with Dymola 2022, JModelica (revision 14023), OpenModelica 1.19.0-dev (449+g4f16e6af22), and OPTIMICA (revision OCT-stable-r19089_JM-r14295).
The following changes have been done:
- Added a package to compute undisturbed ground temperatures.
- Added controller for radiant cooling and heating systems.
- Added a package for district cooling applications.
- Added a new boiler model that is suitable for condensing boilers.
- Corrected various errors and improved compliance with Modelica Language Standard.
The following new libraries have been added:
Buildings.BoundaryConditions | |
Buildings.BoundaryConditions.GroundTemperature | Package with models and climatic data for computing ground temperature. |
Buildings.Controls | |
Buildings.Controls.OBC.RadiantSystems | Package with controllers for radiant cooling and heating systems such for pipes embedded in the concrete slab. |
Buildings.Experimental.DHC | |
Buildings.Experimental.DHC.Plants.Cooling | Package with models for a chilled water plant adapted to
district cooling applications. This is for issue 2264 |
The following new components have been added to existing libraries:
Buildings.Controls.OBC | |
Buildings.Controls.OBC.ASHRAE.G36_PR1.Generic.SetPoints.ZoneStatusDuplicator | Block that duplicates the zone status to be connected to all zone groups. This is for issue 2544. |
Buildings.Controls.OBC.CDL.Routing.BooleanVectorFilter Buildings.Controls.OBC.CDL.Routing.BooleanVectorReplicator Buildings.Controls.OBC.CDL.Routing.IntegerVectorFilter Buildings.Controls.OBC.CDL.Routing.IntegerVectorReplicator Buildings.Controls.OBC.CDL.Routing.RealVectorFilter Buildings.Controls.OBC.CDL.Routing.RealVectorReplicator |
Blocks for filtering and replicating vectors of signals. This is for issue 2544. |
Buildings.Fluid.Boilers | |
Buildings.Fluid.Boilers.BoilerTable Buildings.Fluid.Boilers.Examples.BoilerTable Buildings.Fluid.Boilers.Validation.BoilerTableEfficiencyCurves Buildings.Fluid.Boilers.BaseClasses.PartialBoiler Buildings.Fluid.Boilers.Data.Generic Buildings.Fluid.Boilers.Data.Lochinvar.Crest.FBdash2501 Buildings.Fluid.Boilers.Data.Lochinvar.Crest.FBdash3001 Buildings.Fluid.Boilers.Data.Lochinvar.Crest.FBdash3501 Buildings.Fluid.Boilers.Data.Lochinvar.Crest.FBdash4001 Buildings.Fluid.Boilers.Data.Lochinvar.Crest.FBdash5001 Buildings.Fluid.Boilers.Data.Lochinvar.Crest.FBdash6001 Buildings.Fluid.Boilers.Data.Lochinvar.FTXL.FTX400 Buildings.Fluid.Boilers.Data.Lochinvar.FTXL.FTX500 Buildings.Fluid.Boilers.Data.Lochinvar.FTXL.FTX600 Buildings.Fluid.Boilers.Data.Lochinvar.FTXL.FTX725 Buildings.Fluid.Boilers.Data.Lochinvar.FTXL.FTX850 Buildings.Fluid.Boilers.Data.Lochinvar.KnightXL.KBXdash0400 Buildings.Fluid.Boilers.Data.Lochinvar.KnightXL.KBXdash0500 Buildings.Fluid.Boilers.Data.Lochinvar.KnightXL.KBXdash0650 Buildings.Fluid.Boilers.Data.Lochinvar.KnightXL.KBXdash0800 Buildings.Fluid.Boilers.Data.Lochinvar.KnightXL.KBXdash1000 |
Classes for modeling boilers whose efficiency curves are provided as a table.
Part of the code from the old Buildings.Fluid.Boilers.BoilerPolynomial
has been moved to Buildings.Fluid.Boilers.BaseClasses.PartialBoiler
to support the new model Buildings.Fluid.Boilers.BoilerTable . This is for issue 2651. In the moved code, the boiler's heating power output is now corrected by its loss to the ambient. This is for #2725. |
Buildings.Fluid.Chillers | |
Buildings.Fluid.Chillers.Data.ElectricEIR.ElectricEIRChiller_York_YCAL0033EE_101kW_3_1COP_AirCooled | Data for air cooled chiller. This is for issue #2770. |
The following existing components have been improved in a backward compatible way:
Buildings.Controls.Continuous | |
Buildings.Controls.Continuous.SignalRanker | Changed implementation to use sort function from Modelica Standard Library,
and updated its example to avoid simultaneous state and time events. This is for IBPSA, #1534. |
Buildings.Examples.ChillerPlant | |
Buildings.Examples.ChillerPlant.BaseClasses.DataCenter | Set nominalValuesDefaultPressureCurve=true to avoid warnings.This is for Buildings, issue #2761. Changed initialization from steady state initial to fixed initial for some components. This is for Buildings, issue #2798. |
Buildings.ThermalZones.ReducedOrder | |
Buildings.ThermalZones.ReducedOrder.Validation.VDI6007.BaseClasses.VerifyDifferenceThreePeriods | Improved model to guard against approximation errors of event handling.
With this change, the models in Buildings.ThermalZones.ReducedOrder.Validation.VDI6007
all simulate with OpenModelica.This is for Buildings, issue #2713. |
Buildings.Utilities.Math | |
Buildings.Utilities.Math.Functions.BaseClasses.der_spliceFunction | Reimplemented function to avoid a potential overflow caused by the cosh function.This is for IBPSA #1531. |
The following critical errors have been fixed (i.e., errors that can lead to wrong simulation results):
Buildings.Fluid.Chillers | |
Buildings.Fluid.Chillers.BaseClasses.PartialElectric | Corrected calculation of entering condenser temperature
when using a moist air media model.
This is important for modeling air-cooled chillers using the model
Buildings.Fluid.Chillers.ElectricEIR .
This is for issue #2770. |
Buildings.Occupants | |
Buildings.Occupants.Office.Occupancy.Wang2005Occupancy | Reformulated model so it works also if the simulation does not start at 0. To improve efficiency, this reformulation also changes the event triggering function so that it leads to time events rather than state events. This is for Buildings, #2590. |
The following uncritical errors have been fixed (i.e., errors that do not lead to wrong simulation results, e.g., units are wrong or errors in documentation):
Buildings.Airflow | |
Buildings.Airflow.Multizone.DoorOperable | Removed duplicate declaration of VABp_flow .This is for Buildings, issue #1496. |
Buildings.Applications.DataCenters | |
Buildings.Applications.DataCenters.ChillerCooled.Examples.IntegratedPrimaryLoadSideEconomizer Buildings.Applications.DataCenters.ChillerCooled.Examples.IntegratedPrimarySecondaryEconomizer Buildings.Applications.DataCenters.ChillerCooled.Examples.NonIntegratedPrimarySecondaryEconomizer |
Corrected weather data bus connection which was structurally incorrect
and did not parse in OpenModelica. This is for Buildings, issue 2706. |
Buildings.Electrical | |
Buildings.Electrical.AC.OnePhase.Storage.Battery Buildings.Electrical.DC.Storage.BaseClasses.Charge Buildings.Electrical.DC.Storage.Battery |
Corrected unit string. This is for Buildings, issue #2798. |
Buildings.ThermalZones.Detailed | |
Buildings.ThermalZones.Detailed.BaseClasses.RadiationTemperature | Corrected annotation. This is for Buildings, issue #2550. |
Buildings.ThermalZones.Detailed.Constructions.Examples.ExteriorWallTwoWindows Buildings.ThermalZones.Detailed.Constructions.Examples.ExteriorWallWithWindow Buildings.ThermalZones.Detailed.FLEXLAB.Rooms.X3B.Electrical Buildings.ThermalZones.Detailed.Validation.BESTEST.Cases6xx.Case600FF |
Added missing parameter declaration. This is for Buildings, issue #2556. |
Buildings.ThermalZones.ReducedOrder | |
Buildings.ThermalZones.ReducedOrder.Validation.VDI6007.BaseClasses.VerifyDifferenceThreePeriods | Improved model to guard against approximation errors of event handling.
With this change, the models in Buildings.ThermalZones.ReducedOrder.Validation.VDI6007
all simulate with OpenModelica.This is for Buildings, issue #2713. |
Extends from Modelica.Icons.ReleaseNotes (Icon for release notes in documentation).
Modelica definition
Buildings.UsersGuide.ReleaseNotes.Version_8_0_0
Version 8.0.0
Information
Version 8.0.0 is a major release that contains the first version of the Spawn of EnergyPlus coupling. The library has been tested with Dymola 2021, JModelica (revision 14023), and OPTIMICA (revision OCT-stable-r19089_JM-r14295).
The following major changes have been done:
-
The package
Buildings.ThermalZones.EnergyPlus
contains the first version of the Spawn of EnergyPlus coupling that is being developed at https://lbl-srg.github.io/soep. The Spawn coupling allows to model HVAC and controls in Modelica, and graphically connect to EnergyPlus models for thermal zones, schedules, EMS actuators and output variables. This allows for example to model HVAC systems, HVAC controls and controls for active facade systems in Modelica, and use the EnergyPlus envelope model to simulate heat transfer through the building envelope, including the heat and light transmission through the windows for the current control signal of the active shade. -
The package
Buildings.Experimental.DHC
contains models for district heating and cooling systems that are being developed for the URBANopt District Energy System software. -
The new media
Buildings.Media.Antifreeze.PropyleneGlycolWater
allows modeling of propylene-glycol water mixtures. -
A new cooling coil model
Buildings.Fluid.HeatExchangers.WetCoilEffectivenessNTU
has been added. This model is applicable for fully-dry, partially-wet, and fully-wet regimes. In contrast toBuildings.Fluid.HeatExchangers.WetCoilCounterFlow
and toBuildings.Fluid.HeatExchangers.WetCoilDiscretized
, this model uses the epsilon-NTU relationship rather than a spatial discretization of the coil. This leads to fewer state variables and generally to a faster simulation. -
New simplified door models for bi-directional air exchange between thermal zones are
implemented in
Buildings.Airflow.Multizone
. - Various other models have been improved or added, in particular for modeling of control sequences using the Control Description Language that has been developed in the OpenBuildingControl project at https://obc.lbl.gov.
For more details, please see the release notes below.
The following new libraries have been added:
Buildings.BoundaryConditions | |
Buildings.BoundaryConditions.Validation.BESTEST | Packages with validation models for the weather data BESTEST. This is for IBPSA, issue 1314. |
Buildings.Experimental | |
Buildings.Experimental.DHC | Packages for modeling district heating
and cooling systems. These packages contain components supporting the integration within the URBANopt SDK. The development is in progress. |
Buildings.Media | |
Buildings.Media.Antifreeze.PropyleneGlycolWater | Package with medium model for propylene glycol water mixtures. This is for IBPSA, issue 1410. |
Buildings.ThermalZones | |
Buildings.ThermalZones.EnergyPlus | Package for Spawn of EnergyPlus that couples Modelica directly
to the EnergyPlus envelope model. The models in this package allow simulating the envelope heat transfer of one or several buildings in EnergyPlus, and simulating HVAC and controls in Modelica. EnergyPlus objects are represented graphically as any other Modelica models, and the coupling and co-simulation is done automatically based on these models. |
The following new components have been added to existing libraries:
Buildings.Airflow.Multizone | |
Buildings.Airflow.Multizone.DoorOpen Buildings.Airflow.Multizone.DoorOperable |
Simplified model for large openings with bi-directional, buoyancy-induced air flow, such as open doors. This is for IBPSA, issue 1353. |
Buildings.Controls.OBC | |
Buildings.Controls.OBC.ASHRAE.G36_PR1.Generic.SetPoints.GroupStatus | Find minimum and maximum values regarding the status of zones in one group. This is needed
for specifying the group operating mode according to ASHRAE Guideline 36, May 2020 version. This is for # 1893. |
Buildings.Controls.OBC.ASHRAE.G36_PR1.AHUs.SingleZone.VAV.SetPoints.ModeAndSetPoints | Moved from Buildings.Controls.OBC.ASHRAE.G36_PR1.TerminalUnits.ModeAndSetPoints,
reimplemented to use the operating mode specified according to ASHRAE G36 official release and changed
the heating and cooling demand limit level to be inputs. This is for # 1893. |
Buildings.Controls.OBC.CDL.Continuous.PID | New implementation of the PID controller. This is for # 2056 and for # 2182. |
Buildings.Controls.OBC.CDL.Continuous.PIDWithReset | New implementation of the PID controller with output reset based on a boolean trigger.
This implementation allows to reset the output of the controller
to a parameter value. (Resetting it to an input was never used and is now removed for simplicity.) This is for # 2056 and for # 2182. |
Buildings.Controls.OBC.CDL.Logical.TimerAccumulating | New timer that accumulates time. The output will be reset to zero when the reset input
becomes true .This is for # 2101. |
Buildings.Controls.OBC.CDL.Integers.Sources.Pulse | Integer pulse source signal.This is for # 2125 and # 2282. |
Buildings.Controls.OBC.CDL.Integers.Sources.TimeTable | Time table for Integer outputs.Each output is held constant between two consecutive entries in each column of the table parameters.This is for # 2125. |
Buildings.Controls.OBC.CDL.Logical.Sources.TimeTable | Time table for Boolean outputs.This is for # 2125. |
Buildings.Examples | |
Buildings.Examples.VAVReheat.Controls.SupplyAirTemperature | Control block for tracking the supply air temperature set point. This is for # 2024. |
Buildings.Examples.VAVReheat.Controls.SupplyAirTemperatureSetpoint | Computation of the supply air temperature set point based on the operation mode. This is for # 2024. |
Buildings.Fluid | |
Buildings.Fluid.Actuators.Valves.TwoWayButterfly | Two way valve with the flow characteristic of a butterfly valve. This is for IBPSA, issue 975. |
Buildings.Fluid.HeatExchangers.WetCoilEffectivenessNTU | Cooling coil model applicable for fully-dry, partially-wet, and fully-wet regimes.
In contrast to Buildings.Fluid.HeatExchangers.WetCoilCounterFlow and
to Buildings.Fluid.HeatExchangers.WetCoilDiscretized ,
this model uses the epsilon-NTU relationship rather than a spatial discretization of the coil.
This leads to fewer state variables and generally to a faster simulation.This is for # 622. |
The following existing components have been improved in a backward compatible way:
Buildings.Air | |
Buildings.Air.Systems.SingleZone.VAV.Examples.Guideline36 | Updated AHU controller which applies the sequence of specifying operating mode
according to G36 official release. This is for # 1893. |
Buildings.Controls.OBC.ASHRAE | |
Buildings.Controls.OBC.ASHRAE.G36_PR1.TerminalUnits.Controller | Changed the default heating maximum airflow setpoint to 30% of the zone nominal airflow. This is for # 2172. |
Buildings.Controls.OBC.CDL | |
Buildings.Controls.OBC.CDL.Continuous.MovingMean Buildings.Controls.OBC.CDL.Continuous.PID Buildings.Controls.OBC.CDL.Continuous.PIDWithReset Buildings.Controls.OBC.CDL.Continuous.SlewRateLimiter Buildings.Controls.OBC.CDL.Continuous.Sources.CalendarTime Buildings.Controls.OBC.CDL.Continuous.Sources.Pulse Buildings.Controls.OBC.CDL.Continuous.Sources.Ramp Buildings.Controls.OBC.CDL.Continuous.Sources.Sine Buildings.Controls.OBC.CDL.Continuous.Sources.TimeTable Buildings.Controls.OBC.CDL.Discrete.DayType Buildings.Controls.OBC.CDL.Discrete.FirstOrderHold Buildings.Controls.OBC.CDL.Discrete.Sampler Buildings.Controls.OBC.CDL.Discrete.UnitDelay Buildings.Controls.OBC.CDL.Discrete.ZeroOrderHold Buildings.Controls.OBC.CDL.Logical.Sources.Pulse Buildings.Controls.OBC.CDL.Logical.Sources.SampleTrigger Buildings.Controls.OBC.CDL.Logical.Timer Buildings.Controls.OBC.CDL.Logical.TimerAccumulating Buildings.Controls.OBC.CDL.Logical.TriggeredTrapezoid Buildings.Controls.OBC.CDL.Logical.TrueDelay Buildings.Controls.OBC.CDL.Logical.TrueFalseHold Buildings.Controls.OBC.CDL.Logical.TrueHoldWithReset Buildings.Controls.OBC.CDL.Psychrometrics.DewPoint_TDryBulPhi Buildings.Controls.OBC.CDL.Psychrometrics.SpecificEnthalpy_TDryBulPhi Buildings.Controls.OBC.CDL.Psychrometrics.WetBulb_TDryBulPhi Buildings.Controls.OBC.Utilities.SetPoints.SupplyReturnTemperatureReset Buildings.Controls.OBC.CDL.Utilities.SunRiseSet |
Reformulated to remove dependency to Modelica.Units.SI .This is for issue 2243. |
Buildings.Controls.OBC.CDL.Continuous.Greater Buildings.Controls.OBC.CDL.Continuous.GreaterThreshold Buildings.Controls.OBC.CDL.Continuous.Less Buildings.Controls.OBC.CDL.Continuous.LessThreshold |
Added option to specify a hysteresis, which by default is set to 0. |
Buildings.Controls.OBC.Utilities | |
Buildings.Controls.OBC.Utilities.OptimalStart | Refactored sampling of history of temperature slope to only sample when control error requires optimal start up. This is for #2345. |
Buildings.Examples | |
Buildings.Examples.HydronicHeating.TwoRoomsWithStorage | Changed dpVal_nominal to 6 kPa.
This is for issue 2378.
|
Buildings.Examples.VAVReheat.BaseClasses.Floor | Refactored model to extend from the newly added Buildings.Examples.VAVReheat.BaseClasses.PartialFloor model.This is for issue 1502. |
Buildings.Examples.VAVReheat.BaseClasses.PartialOpenLoop | Declared the rooms in a new model Buildings.Examples.VAVReheat.BaseClasses.Floor
to allow use of the model with the Modelica or the Spawn envelope model. |
Buildings.Examples.DualFanDualDuct.ClosedLoop Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.OneFloor_OneZone Buildings.Examples.ScalableBenchmarks.BuildingVAV.Examples.TwoFloor_TwoZone Buildings.Examples.VAVReheat.ASHRAE2006 Buildings.Examples.VAVReheat.Guideline36 |
Adapted the model to the updated control of supply air temperature. This is for issue 2024. |
Buildings.Examples.VAVReheat.Guideline36 | Upgraded sequence of specifying operating mode according to G36 official release. This is for issue 1893. |
Buildings.Examples.VAVReheat.Guideline36 | Change component name yOutDam to yExhDam
and update documentation graphic to include relief damper.This is for #2399. |
Buildings.Examples.VAVReheat.ASHRAE2006 | Update documentation graphic to include relief damper. This is for #2399. |
Buildings.Fluid | |
Buildings.Fluid.FixedResistances.PlugFlowPipe | Improved calculation of time constant to avoid negative values in some special cases. This is for IBPSA, issue 1427. |
Buildings.Fluid.HeatExchangers.DryCoilEffectivenessNTU Buildings.Fluid.HeatExchangers.PlateHeatExchangerEffectivenessNTU Buildings.Fluid.HeatExchangers.PartialEffectivenessNTU |
Added a warning for when Q_flow_nominal is specified with the wrong sign.
|
Buildings.Fluid.HeatExchangers.RadiantSlabs Buildings.Fluid.HeatExchangers.RadiantSlabs.BaseClasses.Functions.AverageResistance |
Corrected inequality test on alpha ,
and changed print statement to an assertion with assertion level set to warning.This is for issue 2009. |
Buildings.Fluid.HeatExchangers.DryCoilEffectivenessNTU Buildings.Fluid.HeatExchangers.PlateHeatExchangerEffectivenessNTU Buildings.Fluid.HeatExchangers.PartialEffectivenessNTU |
Added a warning for when Q_flow_nominal is specified with the wrong sign.
|
Buildings.Fluid.HeatExchangers.RadiantSlabs Buildings.Fluid.HeatExchangers.RadiantSlabs.BaseClasses.Functions.AverageResistance |
Corrected inequality test on alpha ,
and changed print statement to an assertion with assertion level set to warning.This is for issue 2009. |
Buildings.Fluid.Sensors.EnthalpyFlowRate Buildings.Fluid.Sensors.EntropyFlowRate Buildings.Fluid.Sensors.LatentEnthalpyFlowRate Buildings.Fluid.Sensors.SensibleEnthalpyFlowRate Buildings.Fluid.Sensors.VolumeFlowRate |
Changed parameter values to use as default a steady-state sensor signal. This is for IBPSA, issue 1406. |
Buildings.Media | |
Buildings.Media.Refrigerants.R410A | Improved implementation, which now works with OpenModelica. This is for IBPSA, issue 1414. |
Buildings.Utilities | |
Buildings.Utilities.Cryptographics.sha | Corrected memory leak. |
The following existing components have been improved in a non-backward compatible way:
Buildings.Air | |
Buildings.Air.Systems.SingleZone.VAV | Updated parameters of the two HVAC controllers such as PI gains, damper positions,
and supply air temperature limits to make example models comparable.
Added CO2 monitoring. This is for issue 1608. |
Buildings.Air.Systems.SingleZone.VAV.ChillerDXHeatingEconomizerController | Moved and renamed to
Buildings.Air.Systems.SingleZone.VAV.BaseClasses.ControllerChillerDXHeatingEconomizer .
Also a bug fix was implemented that enables the fan when cooling needed during unoccupied hours.This is for issue 2265. For Dymola, a conversion script makes this change. |
Buildings.Controls.Continuous | |
Buildings.Controls.Continuous.LimPID Buildings.Controls.Continuous.PIDHysteresis Buildings.Controls.Continuous.PIDHysteresisTimer |
Corrected wrong convention of reverse and direct action.
The previous parameter reverseAction with a default of false
has been removed, and
a new parameter reverseActing with a default of true
has been added. This was done because the previous implementation wrongly interpreted reverse action
as the control output changing in reverse to the change in control error, but the
industry convention is that reverse action means that the control output
changes in reverse to the measurement signal.This is for IBPSA, #1365. For Dymola, a conversion script makes this change. |
Buildings.Controls.OBC.ASHRAE.G36_PR1 | |
Buildings.Controls.OBC.ASHRAE.G36_PR1.AHUs.MultiZone.VAV.Economizers.Subsequences.Modulation | Removed parameter samplePeriod and removed delay on actuator signal
to avoid a large delay in this feedback loop.This is for issue 2454. |
Buildings.Controls.OBC.ASHRAE.G36_PR1.AHUs.SingleZone.VAV.Controller | Updated the block of specifying operating mode and setpoints. This is for issue 1893. |
Buildings.Controls.OBC.ASHRAE.G36_PR1.Generic.SetPoints.OperationMode | Upgraded the sequence according to ASHRAE Guideline 36, May 2020 version. This is for issue 1893. |
Buildings.Controls.OBC.CDL.Continuous | |
Buildings.Controls.OBC.CDL.Continuous.ChangeSign Buildings.Controls.OBC.CDL.Continuous.HysteresisWithHold |
Moved blocks to Obsolete package because they can be implemented with other blocks
and have only rarely been used.This is for issue 2134. For Dymola, a conversion script makes this change. |
Buildings.Controls.OBC.CDL.Continuous.LimPID | Corrected wrong convention of reverse and direct action.
The previous parameter reverseAction with a default of false
has been removed, and
a new parameter reverseActing with a default of true
has been added. This was done because the previous implementation wrongly interpreted reverse action
as the control output changing in reverse to the change in control error, but the
industry convention is that reverse action means that the control output
changes in reverse to the measurement signal.This is for IBPSA, #1365. For Dymola, a conversion script makes this change. |
Buildings.Controls.OBC.CDL.Continuous.LimPID | Moved model to Building.Obsolete.Controls.OBC.CDL.Continuous .Instead of this model, use the new model Buildings.Controls.Continuous.PID or
Buildings.Controls.Continuous.PIDWithReset .This is for issue 2056. |
Buildings.Controls.OBC.CDL.Continuous.GreaterEqualThreshold Buildings.Controls.OBC.CDL.Continuous.GreaterEqual Buildings.Controls.OBC.CDL.Continuous.LessEqualThreshold Buildings.Controls.OBC.CDL.Continuous.LessEqual |
Moved blocks to obsolete package. Instead of these blocks, use the ones that
do not contain the word Equal
in their name. This was done because for real-valued, measured quantities, there is
no reason to distinguish between weak and strict inequality
(due to sensor noise, or within a simulation, due to solver noise or rounding errors).This is for #2076. For Dymola, a conversion script makes this change. |
Buildings.Controls.OBC.CDL.Continuous.GreaterThreshold Buildings.Controls.OBC.CDL.Continuous.LessThreshold Buildings.Controls.OBC.CDL.Continuous.NumberOfRequests |
Renamed parameter threshold to t .This is for #2076. For Dymola, a conversion script makes this change. |
Buildings.Controls.OBC.CDL.Continuous.NumberOfRequests | Moved block to obsolete package because this block is not needed,
and it would need to be refactored to add hysteresis. This is for #2124. For Dymola, a conversion script makes this change. |
Buildings.Controls.OBC.CDL.Continuous.Sources.Pulse | Removed startTime parameter. Introduced shift parameter.This is for issue 2170 and issue 2282. For Dymola, a conversion script makes this change. |
Buildings.Controls.OBC.CDL.Continuous.Sources.Pulse | Removed parameter nperiod .This is for issue 2170. |
Buildings.Controls.OBC.CDL.Logical | |
Buildings.Controls.OBC.CDL.Logical.Latch Buildings.Controls.OBC.CDL.Logical.Toggle |
Removed the parameter pre_y_start , and made the initial output to be equal to
latch or toggle input when the clear input is false .This is for #2177. For Dymola, a conversion script makes this change. |
Buildings.Controls.OBC.CDL.Logical.Timer | Removed reset boolean input and added boolean output passed
to show if the time becomes greater than threshold time.This is for #2101. |
Buildings.Controls.OBC.CDL.Logical.Sources.SampleTrigger Buildings.Controls.OBC.CDL.Logical.Sources.Pulse |
Removed startTime parameter. Introduced shift parameter.This is for issue 2170 and issue 2282. For Dymola, a conversion script makes this change. |
Buildings.Controls.OBC.CDL.Integers | |
Buildings.Controls.OBC.CDL.Integers.GreaterEqualThreshold Buildings.Controls.OBC.CDL.Integers.LessEqualThreshold Buildings.Controls.OBC.CDL.Integers.GreaterThreshold Buildings.Controls.OBC.CDL.Integers.LessThreshold |
Renamed parameter threshold to t .This is for #2076. For Dymola, a conversion script makes this change. |
Buildings.Controls.OBC.CDL.Psychrometrics | |
Buildings.Controls.OBC.CDL.Psychrometrics.TDewPoi_TDryBulPhi Buildings.Controls.OBC.CDL.Psychrometrics.TWetBul_TDryBulPhi Buildings.Controls.OBC.CDL.Psychrometrics.h_TDryBulPhi |
Renamed blocks and removed input connector for pressure. This is for #2139. For Dymola, a conversion script will rename existing instance to use the old versions which have been moved to the Buildings.Obsolete package. |
Buildings.Controls.OBC.Utilities | |
Buildings.Controls.OBC.Utilities.SetPoints | Moved package from Buildings.Controls.OBC.CDL.SetPoints .This is for #2355. |
Buildings.Controls.OBC.UnitConversions | |
Buildings.Controls.OBC.UnitConversions.From_Btu Buildings.Controls.OBC.UnitConversions.From_quad Buildings.Controls.OBC.UnitConversions.To_Btu Buildings.Controls.OBC.UnitConversions.To_quad |
Corrected quantity from Work to Energy .This is for #2245. |
Buildings.Examples.VAVReheat | |
Buildings.Examples.VAVReheat.ASHRAE2006 Buildings.Examples.VAVReheat.Guideline36 Buildings.Examples.VAVReheat.BaseClasses.PartialOpenLoop |
Refactored model to implement the economizer dampers directly in
Buildings.Examples.VAVReheat.BaseClasses.PartialOpenLoop rather than through the
model of a mixing box. Since the version of the Guideline 36 model has no exhaust air damper,
this leads to simpler equations.
This is for issue #2454. |
Buildings.Examples.VAVReheat.BaseClasses.VAVBranch | Moved to Buildings.Obsolete.Examples.VAVReheat.BaseClasses.VAVBranch
and replaced by Buildings.Examples.VAVReheat.BaseClasses.VAVReheatBox .
This is for issue #2059. For Dymola, a conversion script makes this change. |
Buildings.Examples.VAVReheat.Controls.Economizer | Updated the block with an input for enabling outdoor air damper opening and an input for
economizer cooling signal. This is for issue 2024. |
Buildings.Examples.VAVReheat.Controls.EconomizerTemperatureControl | This block is now retired. This is for issue 2024. |
Buildings.Experimental | |
Buildings.Experimental.DistrictHeatingCooling | Moved package to Buildings.Obsolete.DistrictHeatingCooling .Generic components for DHC system modeling are now developed under Buildings.Experimental.DHC .
|
The following critical errors have been fixed (i.e., errors that can lead to wrong simulation results):
Buildings.Applications.DataCenters.ChillerCooled.Equipment | |
Buildings.Applications.DataCenters.ChillerCooled.Equipment.BaseClasses.FourPortResistanceChillerWSE Buildings.Applications.DataCenters.ChillerCooled.Equipment.BaseClasses.PartialChillerWSE Buildings.Applications.DataCenters.ChillerCooled.Equipment.BaseClasses.PartialCoolingCoilHumidifyingHeating Buildings.Applications.DataCenters.ChillerCooled.Equipment.BaseClasses.PartialHeatExchanger Buildings.Applications.DataCenters.ChillerCooled.Equipment.BaseClasses.PartialIntegratedPrimary Buildings.Applications.DataCenters.ChillerCooled.Equipment.BaseClasses.PartialPlantParallel Buildings.Applications.DataCenters.ChillerCooled.Equipment.BaseClasses.PartialPumpParallel Buildings.Applications.DataCenters.ChillerCooled.Equipment.BaseClasses.ThreeWayValveParameters Buildings.Applications.DataCenters.ChillerCooled.Equipment.IntegratedPrimaryLoadSide Buildings.Applications.DataCenters.ChillerCooled.Equipment.IntegratedPrimaryPlantSide Buildings.Applications.DataCenters.ChillerCooled.Equipment.IntegratedPrimarySecondary Buildings.Applications.DataCenters.ChillerCooled.Equipment.NonIntegrated Buildings.Applications.DataCenters.ChillerCooled.Equipment.WatersideEconomizer |
Corrected fixed flow resistance settings and added ideal mixing junctions. This is for issue 2446. |
Buildings.Controls.OBC.CDL.Integers | |
Buildings.Controls.OBC.CDL.Integers.Change | Corrected initialization of previous value of input to use the current input rather than 0 .This is for issue 2294. |
The following uncritical errors have been fixed (i.e., errors that do not lead to wrong simulation results, e.g., units are wrong or errors in documentation):
Buildings.Controls.OBC.CDL.Continuous | |
Buildings.Controls.OBC.CDL.Continuous.Greater Buildings.Controls.OBC.CDL.Continuous.GreaterThreshold Buildings.Controls.OBC.CDL.Continuous.Less Buildings.Controls.OBC.CDL.Continuous.LessThreshold |
Corrected documentation. This is for issue 2246. |
Note:
- This version also corrects a possible memory violation when reading weather data files that have very long lines, as reported in IBPSA, #1432.
Extends from Modelica.Icons.ReleaseNotes (Icon for release notes in documentation).
Modelica definition
Buildings.UsersGuide.ReleaseNotes.Version_7_0_2
Version 7.0.2
Information
Version 7.0.2 is a bug fix release. The library has been tested with Dymola 2022, JModelica (revision 14023), OpenModelica 1.19.0-dev (449+g4f16e6af22) and OPTIMICA (revision OCT-stable-r19089_JM-r14295).
The following changes have been done:
- Improved models to comply with Modelica Language Standard. Now all models translate with OpenModelica.
- Corrected chiller models for situation where condenser is air cooled.
- Corrected occupancy models for simulations that do not start at time equal to zero.
- Implemtend various other improvements.
The following new components have been added to existing libraries:
Buildings.Fluid.Chillers | |
Buildings.Fluid.Chillers.Data.ElectricEIR.ElectricEIRChiller_York_YCAL0033EE_101kW_3_1COP_AirCooled | Data for air cooled chiller. This is for Buildings, issue #2770. |
The following existing components have been improved in a backward compatible way:
Buildings.Controls.Continuous | |
Buildings.Controls.Continuous.SignalRanker | Changed implementation to use sort function from Modelica Standard Library,
and updated its example to avoid simultaneous state and time events. This is for IBPSA, #1534. |
Buildings.Examples.ChillerPlant | |
Buildings.Examples.ChillerPlant.BaseClasses.DataCenter | Set nominalValuesDefaultPressureCurve=true to avoid warnings.This is for Buildings, issue #2761. Changed initialization from steady state initial to fixed initial for some components. This is for Buildings, issue #2798. |
Buildings.ThermalZones.ReducedOrder | |
Buildings.ThermalZones.ReducedOrder.Validation.VDI6007.BaseClasses.VerifyDifferenceThreePeriods | Improved model to guard against approximation errors of event handling.
With this change, the models in Buildings.ThermalZones.ReducedOrder.Validation.VDI6007
all simulate with OpenModelica.This is for Buildings, issue #2713. |
Buildings.Utilities.Math | |
Buildings.Utilities.Math.Functions.BaseClasses.der_spliceFunction | Reimplemented function to avoid a potential overflow caused by the cosh function.This is for IBPSA #1531. |
The following critical errors have been fixed (i.e., errors that can lead to wrong simulation results):
Buildings.Fluid.Chillers | |
Buildings.Fluid.Chillers.BaseClasses.PartialElectric | Corrected calculation of entering condenser temperature
when using a moist air media model.
This is important for modeling air-cooled chillers using the model
Buildings.Fluid.Chillers.ElectricEIR .
This is for Buildings, issue #2770. |
Buildings.Occupants | |
Buildings.Occupants.Office.Occupancy.Wang2005Occupancy | Reformulated model so it works also if the simulation does not start at 0. To improve efficiency, this reformulation also changes the event triggering function so that it leads to time events rather than state events. This is for Buildings, #2590. |
The following uncritical errors have been fixed (i.e., errors that do not lead to wrong simulation results, e.g., units are wrong or errors in documentation):
Buildings.Airflow | |
Buildings.Airflow.Multizone.DoorOperable | Removed duplicate declaration of VABp_flow .This is for Buildings, issue #1496. |
Buildings.Electrical | |
Buildings.Electrical.AC.OnePhase.Storage.Battery Buildings.Electrical.DC.Storage.BaseClasses.Charge Buildings.Electrical.DC.Storage.Battery |
Corrected unit string. This is for Buildings, issue #2798. |
Buildings.Applications.DataCenters | |
Buildings.Applications.DataCenters.ChillerCooled.Examples.IntegratedPrimaryLoadSideEconomizer Buildings.Applications.DataCenters.ChillerCooled.Examples.IntegratedPrimarySecondaryEconomizer Buildings.Applications.DataCenters.ChillerCooled.Examples.NonIntegratedPrimarySecondaryEconomizer |
Corrected weather data bus connection which was structurally incorrect
and did not parse in OpenModelica. This is for Buildings, issue 2706. |
Buildings.ThermalZones.Detailed | |
Buildings.ThermalZones.Detailed.BaseClasses.RadiationTemperature | Corrected annotation. This is for Buildings, issue #2550. |
Buildings.ThermalZones.Detailed.Constructions.Examples.ExteriorWallTwoWindows Buildings.ThermalZones.Detailed.Constructions.Examples.ExteriorWallWithWindow Buildings.ThermalZones.Detailed.FLEXLAB.Rooms.X3B.Electrical Buildings.ThermalZones.Detailed.Validation.BESTEST.Cases6xx.Case600FF |
Added missing parameter declaration. This is for Buildings, issue #2556. |
Extends from Modelica.Icons.ReleaseNotes (Icon for release notes in documentation).
Modelica definition
Buildings.UsersGuide.ReleaseNotes.Version_7_0_1
Version 7.0.1
Information
Version 7.0.1 is a bug fix release. The library has been tested with Dymola 2021 and 2022, JModelica (revision 14023), and OPTIMICA (revision OCT-stable-r12473_JM-r14295).
The following changes have been done:
- Corrected memory violation on Windows for weather data file with long header lines.
-
Corrected various misplaced or missing
each
declarations. - Corrected access to protected classes.
- Reformulated replaceable class to avoid access of components that are not in the constraining type.
- Added missing parameter declarations for records.
The following existing components have been improved in a backward compatible way:
Buildings.Applications | |
Buildings.Applications.DataCenters.ChillerCooled.Equipment.Validation | Changed boundary condition model to prescribed pressure rather than prescribed mass flow rate.
Prescribing the mass flow rate caused
unreasonably large pressure drop because the mass flow rate was forced through a closed valve. This is for #2488. |
Buildings.Electrical | |
Buildings.Electrical.AC.ThreePhasesUnbalanced.Validation.IEEETests.Test4NodesFeeder.BalancedStepUp.YD | Set better start values for algebraic variables. This is for #2432. |
The following uncritical errors have been fixed (i.e., errors that do not lead to wrong simulation results, e.g., units are wrong or errors in documentation):
Buildings.Fluid | |
Buildings.Fluid.CHPs.BaseClasses.EnergyConversionNormal Buildings.Fluid.CHPs.ThermalElectricalFollowing |
Reformulated replaceable class to avoid access of components that are not in the constraining type. This is for issue #2471. |
Buildings.Fluid.Geothermal.Borefields.BaseClasses.PartialBorefield | Corrected placement of each keyword.
See Buildings, #2440.
Switched port connections for masFloDiv .
See IBPSA, #41.
Propagated flowReversal into masFloDiv and masFloMul .
|
Buildings.Fluid.Geothermal.Borefields.Examples.Borefields Buildings.Fluid.Geothermal.Borefields.Validation.ConstantHeatInjection_100Boreholes Buildings.Fluid.Geothermal.Borefields.Validation.Sandbox |
Added missing parameter keyword for data records. |
Buildings.Fluid.HeatExchangers.BaseClasses.CoilRegister Buildings.Fluid.HeatExchangers.BaseClasses.HexElementLatent |
Changed constant simplify_mWat_flow from protected to public because it is assigned by
Buildings.Fluid.HeatExchangers.WetCoilCounterFlow.This is for #2387. |
Buildings.Fluid.HeatExchangers.BaseClasses.PartialPrescribedOutlet | Removed duplicate declaration of m_flow_nominal which is already
declared in the base class.
|
Buildings.Fluid.HeatExchangers.DXCoils.AirCooled.Examples.MultiStage Buildings.Fluid.HeatExchangers.DXCoils.AirCooled.Examples.PerformanceCurves.Curve_I Buildings.Fluid.HeatExchangers.DXCoils.AirCooled.Examples.PerformanceCurves.Curve_II Buildings.Fluid.HeatExchangers.DXCoils.AirCooled.Examples.PerformanceCurves.Curve_III Buildings.Fluid.HeatExchangers.DXCoils.AirCooled.Examples.SingleSpeed Buildings.Fluid.HeatExchangers.DXCoils.AirCooled.Examples.SpaceCooling Buildings.Fluid.HeatExchangers.DXCoils.AirCooled.Examples.VariableSpeed Buildings.Fluid.HeatExchangers.DXCoils.AirCooled.Validation.SingleSpeedEnergyPlus Buildings.Fluid.HeatExchangers.DXCoils.AirCooled.Validation.SingleSpeedPLREnergyPlus Buildings.Fluid.HeatExchangers.DXCoils.BaseClasses.Examples.WetCoil Buildings.Fluid.HeatExchangers.DXCoils.WaterCooled.Examples.MultiStage Buildings.Fluid.HeatExchangers.DXCoils.WaterCooled.Examples.SingleSpeed Buildings.Fluid.HeatExchangers.DXCoils.WaterCooled.Examples.VariableSpeed Buildings.Fluid.HeatExchangers.DXCoils.WaterCooled.Validation.VariableSpeedEnergyPlus Buildings.Fluid.HeatExchangers.DXCoils.WaterCooled.Validation.VariableSpeedEnergyPlusPartLoad |
Corrected placement of each keyword.See Buildings, PR #2440. Added missing parameter declaration for data record. |
Buildings.Fluid.HeatExchangers.WetCoilCounterFlow | Removed final declaration in redeclaration.This is for #2392. |
Buildings.Fluid.Interfaces.PrescribedOutlet | Removed duplicate declaration of m_flow_nominal which is already
declared in the base class.
|
Buildings.Fluid.Sources.BaseClasses.PartialSource Buildings.Fluid.Storage.BaseClasses.IndirectTankHeatExchanger |
Corrected misplaced each and added missing instance comment.This is for IBPSA, #1462. |
Buildings.BoundaryConditions.WeatherData.BaseClasses.getTimeSpanTMY3 | Corrected memory access violation on Windows for files with long header. This is for IBPSA, #1432. |
Buildings.BoundaryConditions.WeatherData.BaseClasses.getTimeSpanTMY3 Buildings.Utilities.Cryptographics.sha |
Corrected memory leak in C function. |
Buildings.Utilities.IO.BCVTB.BaseClasses.FluidInterface | Corrected missing each keyword.
|
Extends from Modelica.Icons.ReleaseNotes (Icon for release notes in documentation).
Modelica definition
Buildings.UsersGuide.ReleaseNotes.Version_7_0_0
Version 7.0.0
Information
Version 7.0.0 is a major release that contains various new packages, new models and improvements to existing models. The library has been tested with Dymola 2020x and 2021, JModelica (revision 14023), and OPTIMICA (revision OCT-stable-r12473_JM-r14295).
The following major changes have been done:
-
New packages have been added to model building controls (
Buildings.Controls.OBC.Utilities
) and to support the creation of emulators that compare the performance of building control sequences in the Building Optimization Performance Tests framework BOPTEST. -
Various new control blocks have been added to
Buildings.Controls.OBC.CDL
. - Various new equipment models have been added, such as models of absorption chillers, CHP equipment and heat pumps.
- The reduced order building models now also allow modeling air moisture and air contaminant balance.
- A tutorial has been added to explain how to implement control sequences using the Control Description Language that is being developed in the OpenBuildingControl project.
- The icons of many components have been updated so that they visualize temperatures, flow rates or control signals while the simulation is running.
-
Results of the ANSI/ASHRAE Standard 14 validation (BESTEST) are now integrated in the user's guide
Buildings.ThermalZones.Detailed.Validation.BESTEST.UsersGuide
.
The following new libraries have been added:
Buildings.Controls.OBC.Utilities | Package with utility blocks, base classes and validation models for the OpenBuildingControl (OBC) library. |
Buildings.Utilities.IO.SignalExchange | Package with blocks that can be used to identify and activate control signal overwrites, and to identify and read sensor signals. This package is used by the Building Optimization Performance Test software BOPTEST. |
Buildings.Utilities.IO.Python36 | Upgraded from Buildings.Utilities.IO.Python27
since Python2.7 has been deprecated.This is for issue #1760. |
The following new components have been added to existing libraries:
Buildings.Controls | |
Buildings.Controls.OBC.ASHRAE.G36_PR1.AHUs.MultiZone.VAV.SetPoints.OutdoorAirFlow | Package of sequences for specifying the minimum outdoor airflow rate.
This replaces Buildings.Controls.OBC.ASHRAE.G36_PR1.AHUs.MultiZone.VAV.SetPoints.OutsideAirFlow .
The new implemented sequences separate zone level calculation from the system level calculation.
It avoids vector-valued calculations.This is for #1829. |
Buildings.Controls.OBC.ASHRAE.G36_PR1.Generic.SetPoints.ZoneStatus | Block that outputs zone temperature status by comparing it with setpoint temperatures, with the maximum and
minimum temperature of the group which the zone is in. This allows separating the vector-valued calculations
from control sequences. This is for #1709. |
Buildings.Controls.OBC.CDL.Discrete.TriggeredMovingMean | Block that outputs the triggered discrete moving mean of an input signal.
This replaces Buildings.Controls.OBC.CDL.Discrete.MovingMean , which
has been moved to Buildings.Obsolete .This is for #1588. |
Buildings.Controls.OBC.Utilities.OptimalStart | Block that outputs optimal start time for an HVAC system prior to the occupancy. This is for #1589. |
Buildings.Fluid | |
Buildings.Fluid.Actuators.Valves.ThreeWayTable | Three way valves with opening characteristics based on a user-provided table. |
Buildings.Fluid.CHPs | Package with model for combined heat and power device. |
Buildings.Fluid.Chillers.AbsorptionIndirectSteam | Indirect steam heated absorption chiller based on performance curves. |
Buildings.Fluid.FixedResistances.CheckValve | Check valve that prevents backflow, except for a small leakage flow rate. This is for IBPSA, #1198 |
Buildings.Fluid.HeatPumps.EquationFitReversible | Heat pump model that can be reversed between heating and cooling mode, that takes as a set point the leaving fluid temperature, and that computes its performance based on an equation fit. |
Buildings.Examples.Tutorial | |
Buildings.Examples.Tutorial.CDL | Tutorial that explains how to implement control sequences using the Control Description Language. |
The following existing components have been improved in a backward compatible way:
Buildings.BoundaryConditions.WeatherData | |
Buildings.BoundaryConditions.WeatherData.ReaderTMY3 | Refactored weather data reader and changed implementation to allow exactly zero radiation rather
than a small positive value.
This was required to allow simulating buildings at steady-state, which is needed
for some controls design.
For examples in which buildings are simulated at steady-state, see
Buildings.ThermalZones.Detailed.Validation.MixedAirFreeResponseSteadyState ,
Buildings.Examples.VAVReheat.Validation.Guideline36SteadyState and
Buildings.ThermalZones.ReducedOrder.Validation.RoomSteadyState .This is for IBPSA, #1340. |
Buildings.Controls.Continuous | |
Buildings.Controls.Continuous.LimPID | Removed homotopy that may be used during initialization to ensure that outputs are bounded. This is for IBPSA, #1221. |
Buildings.Controls.OBC.CDL | |
Buildings.Controls.OBC.CDL.Continuous.Derivative | Removed parameter initType and x_start .This is for IBPSA, #1887. For Dymola, a conversion script makes this change. |
Buildings.Controls.OBC.CDL.Continuous.IntegratorWithReset | Removed parameter initType .This is for IBPSA, #1887. For Dymola, a conversion script makes this change. |
Buildings.Controls.OBC.CDL.Continuous.LimPID | Removed homotopy that may be used during initialization to ensure that outputs are bounded. This is for IBPSA, #1221. |
Buildings.Controls.OBC.CDL.Continuous.Sources.CalendarTime Buildings.Controls.OBC.CDL.Types.ZeroTime |
Revised implementation such that the meaning of time is better explained
and unix time stamps are correctly defined with respect to GMT.
Added option unix time stamp GMT.This is for IBPSA, #1232. |
Buildings.Controls.OBC.CDL.Continuous.Sources.CalendarTime Buildings.Controls.OBC.CDL.Types.ZeroTime |
Revised implementation such that the meaning of time is better explained
and unix time stamps are correctly defined with respect to GMT.
Added option unix time stamp GMT.This is for IBPSA, #1232. |
Buildings.Controls.OBC.CDL.Logical.Latch Buildings.Controls.OBC.CDL.Logical.Toggle |
Simplified implementation, which makes them work with OpenModelica. This is for #1823. |
Buildings.Controls.OBC.CDL.Logical.Timer | Added a boolean input to reset the accumulated timer. This is for #1221. |
Buildings.Controls.OBC.CDL.Types.Init | Removed this enumeration because it is no longer used. This is for #1887. |
Buildings.Controls.OBC.ASHRAE.G36_PR1 | |
Buildings.Controls.OBC.ASHRAE.G36_PR1.Generic.SetPoints.TrimAndRespond | Corrected to delay the true initial device status. This is for #1876 |
Buildings.Controls.OBC.ASHRAE.G36_PR1.TerminalUnits.Reheat.DamperValves | Replaced multisum block with add blocks, replaced gain block used for normalization
with division block. This is for #1830 |
Buildings.Controls.OBC.ASHRAE.G36_PR1.AHUs.SingleZone.VAV.Controller | Replaced the mode and setpoint calculation block with
Buildings.Controls.OBC.ASHRAE.G36_PR1.TerminalUnits.ModeAndSetPoints .This is for #1709 |
Buildings.Controls.OBC.ASHRAE.G36_PR1.TerminalUnits.Reheat.SetPoints.ActiveAirFlow | Used hysteresis to check occupancy. This is for #1788. |
Buildings.Controls.OBC.ASHRAE.G36_PR1.AHUs.MultiZone.VAV.SetPoints.OutsideAirFlow | Applied hysteresis for checking ventilation efficiency. This is for #1787. |
Buildings.Controls.OBC.ASHRAE.G36_PR1.Generic.SetPoints.TrimAndRespond | Added assertions and corrected implementation when respond amount is negative. This is for #1503. |
Buildings.Examples.Tutorial | |
Buildings.Examples.Tutorial.Boiler Buildings.Examples.Tutorial.SpaceCooling |
Updated examples to use the control blocks from the Control Description Language package
Buildings.Controls.OBC.CDL .
|
Buildings.Examples.VAVReheat | |
Buildings.Examples.VAVReheat.BaseClasses.VAVBranch | Added output connector for returned damper position. |
Buildings.Fluid | |
Buildings.Fluid.Actuators.BaseClasses.ActuatorSignal Buildings.Fluid.Actuators.Dampers.PressureIndependent |
Added the computation of the damper opening. |
Buildings.Fluid.Actuators.BaseClasses.PartialTwoWayValve Buildings.Fluid.Actuators.Valves.TwoWayEqualPercentage Buildings.Fluid.Actuators.Valves.TwoWayLinear Buildings.Fluid.Actuators.Valves.TwoWayPolynomial Buildings.Fluid.Actuators.Valves.TwoWayPressureIndependent Buildings.Fluid.Actuators.Valves.TwoWayQuickOpening Buildings.Fluid.Actuators.Valves.TwoWayTable |
Improved implementation to guard against control input that is negative.
The new implementation constrains the input to be bigger than 0. This is for IBPSA, #1233. |
Buildings.Fluid.Geothermal.Borefields.BaseClasses.HeatTransfer.ThermalResponseFactors.shaGFunction | Declared string as a constant due to JModelica's tigther type checking. This is for IBPSA, #1230. |
Buildings.Fluid.HeatExchangers.DXCoils.AirCooled.MultiStage Buildings.Fluid.HeatExchangers.DXCoils.AirCooled.SingleSpeed Buildings.Fluid.HeatExchangers.DXCoils.AirCooled.VariableSpeed Buildings.Fluid.HeatExchangers.DXCoils.WaterCooled.MultiStage Buildings.Fluid.HeatExchangers.DXCoils.WaterCooled.SingleSpeed Buildings.Fluid.HeatExchangers.DXCoils.WaterCooled.VariableSpeed |
Corrected wrong min and max attribute for change in humidity.This is for #1933. |
Buildings.Fluid.Storage.Stratified Buildings.Fluid.Storage.StratifiedEnhanced Buildings.Fluid.Storage.StratifiedEnhancedInternalHex |
Provided option to initialize the tank temperature at different values across the height of the tank. This is for IBPSA, #1246. |
Buildings.Fluid.SolarCollectors.BaseClasses.PartialSolarCollector | In volume, set prescribedHeatFlowRate=false .This is for #1636. |
Buildings.HeatTransfer | |
Buildings.HeatTransfer.Convection.Exterior | Set wind direction modifier to a constant as wind speed approaches zero. This is for #1923. |
Buildings.ThermalZones.Detailed.Validation.BESTEST.Cases6xx | |
Buildings.ThermalZones.Detailed.Validation.BESTEST.Cases6xx.Case600 Buildings.ThermalZones.Detailed.Validation.BESTEST.Cases6xx.Case600FF |
Changed computation of time averaged values to avoid a time event every hour. This is for #1714. |
Buildings.ThermalZones.ReducedOrder | |
Buildings.ThermalZones.ReducedOrder.RC.OneElement Buildings.ThermalZones.ReducedOrder.RC.TwoElements Buildings.ThermalZones.ReducedOrder.RC.ThreeElements Buildings.ThermalZones.ReducedOrder.RC.FourElements |
Added option to also simulate moisture balance in room air volume.
This can be enabled by setting the parameter use_moisture_balance = true .This is for IBPSA, #1209. |
Buildings.Utilities | |
Buildings.Utilities.IO.Files.CSVWriter Buildings.Utilities.IO.Files.CombiTimeTableWriter Buildings.Utilities.IO.Files.CombiTimeTableWriter |
Revised to avoid overflow of string buffer in Dymola. This is for IBPSA, #1219. |
Buildings.Utilities.Math.SmoothHeaviside Buildings.Utilities.Math.Functions.SmoothHeaviside |
This function is now twice instead of only once Lipschitz continuously differentiable. This is for IBPSA, #1202. |
Buildings.Utilities.Time.CalendarTime Buildings.Utilities.Time.Types.ZeroTime |
Revised implementation such that the meaning of time is better explained
and unix time stamps are correctly defined with respect to GMT.
Added option unix time stamp GMT.This is for IBPSA, #1192. |
Buildings.Utilities.Comfort.Fanger | Updated the model from ASHRAE 1997 to ANSI/ASHRAE 55-2017
and added a validation model which compares the PMV
with an implementation from the University of California at Berkeley. This is for #1936. |
Buildings.Examples | |
Buildings.Examples.VAVReheat.BaseClasses.Floor Buildings.Examples.VAVReheat.ASHRAE2006 Buildings.Examples.VAVReheat.Guideline36 Buildings.Examples.DualFanDualDuct |
Updated core zone geometry parameters related to room heat and mass balance.
This change was done in
Buildings.Examples.VAVReheat.BaseClasses.Floor .This is for #1719. |
The following existing components have been improved in a non-backward compatible way:
Buildings.Airflow | |
Buildings.Airflow.Multizone | Set parameters m_flow_small , m1_flow_small
and m2_flow_small to final so that they do
no longer appear on the GUI. These parameters are not used by models
in this package.
This is for IBPSA, #1362.For Dymola, a conversion script makes this change. |
Buildings.Controls.OBC.CDL | |
Buildings.Controls.OBC.CDL.Continuous.LimPID | Refactored model so that it is itself a CDL conformant composite block.
This refactoring removes the no longer use parameters xd_start that was
used to initialize the state of the derivative term. This state is now initialized
based on the requested initial output yd_start which is a new parameter
with a default of 0 .
Also, removed the parameters y_start and initType because
the initial output of the controller can be set by using xi_start
and yd_start .
This refactoring also removes the parameter strict that
was used in the output limiter. The new implementation enforces a strict check by default.This is for #1878. For Dymola, a conversion script makes this change. |
Buildings.Controls.OBC.CDL.Continuous.LimPID | Changed the default values for the output limiter from yMin=-yMax to yMin=0
and from yMax being unspecified to yMax=1 .This is for #1888. For Dymola, a conversion script makes this change. |
Buildings.Controls.OBC.CDL.Discrete.MovingMean | This block became obsolete, use Buildings.Controls.OBC.CDL.Discrete.TriggeredMovingMean instead.For Dymola, a conversion script makes this change. |
Buildings.Controls.OBC.Utilities.SetPoints.SupplyReturnTemperatureReset | Changed name from HotWaterTemperatureReset to SupplyReturnTemperatureReset .This is for #860. For Dymola, a conversion script makes this change. |
Buildings.Controls.OBC.ASHRAE.G36_PR1 | |
Buildings.Controls.OBC.ASHRAE.G36_PR1.AHUs.MultiZone.VAV.Controller | Reimplemented to add new block for specifying the minimum outdoor airfow setpoint.
The new block avoids vector-valued calculations. The reimplemented controller needs to work with Buildings.Controls.OBC.ASHRAE.G36_PR1.AHUs.MultiZone.VAV.SetPoints.OutdoorAirFlow.Zone and
Buildings.Controls.OBC.ASHRAE.G36_PR1.AHUs.MultiZone.VAV.SetPoints.OutdoorAirFlow.SumZone ,
to calculate the zone level minimum outdoor airflow setpoints and then find the sum, the minimum and
the maximum of these setpoints. See
Buildings.Examples.VAVReheat.Guideline36 .
This is for #1829. |
Buildings.Controls.OBC.ASHRAE.G36_PR1.Generic.SetPoints.OperationMode | Reimplemented to remove the vector-valued calculations. This is for #1709 |
Buildings.Controls.OBC.ASHRAE.G36_PR1.AHUs.SingleZone.VAV.ModeAndSetPoints | Removed from the library as it can be replaced by
Buildings.Controls.OBC.ASHRAE.G36_PR1.TerminalUnits.ModeAndSetPoints .This is for #1709 |
Buildings.Controls.OBC.ASHRAE.G36_PR1.AHUs.SingleZone.VAV.Controller | Added cooling coil control and the controller validation model. This is for #1265 |
Buildings.Controls.OBC.ASHRAE.G36_PR1.AHUs.SingleZone.VAV.Economizers.Subsequences.Enable | Added the option to allow fixed plus differential dry bulb temperature cutoff. |
Buildings.Controls.OBC.ASHRAE.G36_PR1.AHUs.SingleZone.VAV.Economizers.Subsequences.Modulation | Added heating coil control sequences. |
Buildings.Controls.OBC.ASHRAE.G36_PR1.AHUs.SingleZone.VAV.SetPoints.Supply | Added a switch for fan control. |
Buildings.Controls.OBC.ASHRAE.G36_PR1.AHUs.SingleZone.VAV.ZoneState | Improved the implementation to avoid issues when heating and cooling controls occur at the same time. |
Buildings.Controls.OBC.ASHRAE.G36_PR1.TerminalUnits.Reheat.SystemRequests | Changed the actual damper position name from uDam to yDam_actual .This is for #1873 |
Buildings.Controls.OBC.ASHRAE.G36_PR1.TerminalUnits.Controller | Added actual VAV damper position as the input for generating system request. This is for #1873 |
Buildings.Controls.OBC.ASHRAE.G36_PR1.TerminalUnits.Reheat.DamperValves | Added option to check if the VAV damper is pressure independent. This is for #1873 |
Buildings.Controls.SetPoints | |
Buildings.Controls.SetPoints.SupplyReturnTemperatureReset | Changed name from HotWaterTemperatureReset to SupplyReturnTemperatureReset .This is for #860. For Dymola, a conversion script makes this change. |
Buildings.Fluid.Actuators | |
Buildings.Fluid.Actuators.BaseClasses.PartialDamperExponential Buildings.Fluid.Actuators.Dampers.Exponential Buildings.Fluid.Actuators.Dampers.MixingBox Buildings.Fluid.Actuators.Dampers.MixingBoxMinimumFlow Buildings.Fluid.Actuators.Dampers.PressureIndependent Buildings.Fluid.Actuators.Dampers.VAVBoxExponential |
Merged VAVBoxExponential into Exponential .Exponential now provides all modeling capabilities previously
implemented in VAVBoxExponential which is no more needed and
has been removed from the library.New parameters dpDamper_nominal and dpFixed_nominal
have been introduced in Exponential , consistent with the
valve models.Parameter k0 has been replaced by a leakage coefficient.For Dymola, a conversion script makes this change. However the script will not make the each keyword persist in array declarations. The
keyword will have to be manually reintroduced after applying the script.This is for IBPSA, #1188. |
Buildings.ThermalZones.ReducedOrder | |
Buildings.ThermalZones.ReducedOrder.RC.OneElement Buildings.ThermalZones.ReducedOrder.RC.OneElement Buildings.ThermalZones.ReducedOrder.RC.OneElement Buildings.ThermalZones.ReducedOrder.RC.OneElement Buildings.ThermalZones.ReducedOrder.RC.ThreeElements Buildings.ThermalZones.ReducedOrder.RC.ThreeElements Buildings.ThermalZones.ReducedOrder.RC.TwoElements Buildings.ThermalZones.ReducedOrder.RC.TwoElements Buildings.ThermalZones.ReducedOrder.RC.FourElements Buildings.ThermalZones.ReducedOrder.RC.FourElements Buildings.ThermalZones.ReducedOrder.RC.OneElement Buildings.ThermalZones.ReducedOrder.EquivalentAirTemperature.BaseClasses.PartialVDI6007 Buildings.ThermalZones.ReducedOrder.EquivalentAirTemperature.BaseClasses.PartialVDI6007 Buildings.ThermalZones.ReducedOrder.EquivalentAirTemperature.VDI6007WithWindow |
Renamed convection coefficient from alpha* to hCon* .For Dymola, a conversion script makes this change. This is for IBPSA, #1168. |
The following critical errors have been fixed (i.e., errors that can lead to wrong simulation results):
Buildings.Controls.OBC.CDL | |
Buildings.Controls.OBC.CDL.Continuous.Sources.TimeTable | Corrected implementation so that it gives the correct periodicity
of the table if the simulation starts at a negative time. This is for 1834. |
Buildings.Electrical | |
Buildings.Electrical.AC.OnePhase.Sources.PVSimple Buildings.Electrical.AC.OnePhase.Sources.PVSimpleOriented Buildings.Electrical.AC.ThreePhasesBalanced.Sources.PVSimple Buildings.Electrical.AC.ThreePhasesBalanced.Sources.PVSimpleOriented Buildings.Electrical.AC.ThreePhasesUnbalanced.Sources.PVsimple Buildings.Electrical.AC.ThreePhasesUnbalanced.Sources.PVsimpleOriented Buildings.Electrical.AC.ThreePhasesUnbalanced.Sources.PVsimpleOriented_N Buildings.Electrical.AC.ThreePhasesUnbalanced.Sources.PVsimple_N Buildings.Electrical.Interfaces.PartialPV |
Corrected model so that reported power P also includes the DCAC conversion.
Note that the power added to the elecrical system was correct, but the power reported in
the output connector P did not include this conversion factor.This is for 1577. |
Buildings.Electrical.AC.OnePhase.Storage.Battery Buildings.Electrical.AC.ThreePhasesBalanced.Storage.Battery |
Corrected model and improved the documentation. The previous model extracted from
the AC connector the input power P plus the AC/DC conversion losses, but P
should be the power exchanged at the AC connector. Conversion losses are now only
accounted for in the energy exchange at the battery.This is for 1865. |
Buildings.Examples.VAVReheat | |
Buildings.Examples.VAVReheat.ASHRAE2006 Buildings.Examples.VAVReheat.Guideline36 |
Connected actual VAV damper position as the measured input data for
defining duct static pressure setpoint. This is for #1873. |
Buildings.Examples.VAVReheat.Controls.DuctStaticPressureSetpoint | Reverse action changed to true for the pressure set-point controller.
|
Buildings.Examples.VAVReheat.Controls.RoomVAV | Refactored the model to implement a single maximum control logic.
The previous implementation led to a maximum air flow rate in heating demand. The input connector TDis is removed. This is non backward compatible.This is for #1873. |
Buildings.Fluid | |
Buildings.Fluid.HeatExchangers.CoolingTowers.YorkCalc Buildings.Fluid.HeatExchangers.CoolingTowers.BaseClasses.Characteristics.normalizedPower |
Corrected error in computing the cooling tower fan power consumption. This is for 1691. |
Buildings.Utilities | |
Buildings/Resources/Python-Sources/KalmanFilter.py Buildings.Utilities.IO.Python27.Examples.KalmanFilter |
Changed the temporary file format from pickle to json as the former can trigger a
segfault with JModelica simulation run in a subprocess.This is for Buildings, #1587. |
The following uncritical errors have been fixed (i.e., errors that do not lead to wrong simulation results, e.g., units are wrong or errors in documentation):
Buildings.Controls.OBC.CDL | |
Buildings.Controls.OBC.CDL.Continuous.LimPID | Removed wrong unit declaration for gain k .This is for Buildings, #1821. |
Buildings.Fluid.Sources | |
Buildings.Fluid.Sources.Boundary_pT Buildings.Fluid.Sources.Boundary_ph Buildings.Fluid.Sources.MassFlowSource_T Buildings.Fluid.Sources.MassFlowSource_h |
Refactored handling of mass fractions which was needed to handle media such as
Modelica.Media.IdealGases.MixtureGases.FlueGasSixComponents and
Modelica.Media.IdealGases.MixtureGases.SimpleNaturalGas .Prior to this change, use of these media led to a translation error. This is for IBPSA, #1205. |
Buildings.ThermalZones.Detailed | |
Buildings.ThermalZones.Detailed.Constructions.Examples.ExteriorWallTwoWindows Buildings.ThermalZones.Detailed.Constructions.Examples.ExteriorWallWithWindow |
Corrected wrong assignment of a parameter. This is for IBPSA, #1766. |
Buildings/Resources | |
Buildings/Resources/C-Sources/cryptographicsHash.c | Add a #ifndef clause.This is for IBPSA, #1278. |
The following components have become obsolete:
Buildings.Obsolete | |
Buildings.Obsolete.Controls.OBC.CDL.Discrete.MovingMean | The block Buildings.Controls.OBC.CDL.Discrete.TriggeredMovingMean
replaced the original MovingMean block.For Dymola, a conversion script makes this change. This is for #1588. |
Buildings.Obsolete.Utilities.IO.Python27 | The package Buildings.Utilities.IO.Python27
has been upgraded to Buildings.Utilities.IO.Python36 .For Dymola, a conversion script moves the Python27 package to here. This is for issue #1760. |
Extends from Modelica.Icons.ReleaseNotes (Icon for release notes in documentation).
Modelica definition
Buildings.UsersGuide.ReleaseNotes.Version_6_0_0
Version 6.0.0
Information
Version 6.0.0 is a major new release that contains various new packages, new models and improvements to existing models. The library has been tested with Dymola 2019FD01 and with JModelica (revision 12903).
The following major changes have been done:
-
Various new packages have been added, such as:
- A package for simulating occupancy and occupancy that resulted from IEA EBC Annex 66.
- A package with models for geothermal borefields.
- A package with blocks for control of shades and of outdoor lights.
- A package with blocks that allow generating time series and scatter plots, and writing these plots to one or several html files.
- A package with blocks for unit conversion.
-
Various new control blocks have been added to
Buildings.Controls.OBC.CDL
.
The following new libraries have been added:
Buildings.Controls.OBC.OutdoorLights | Package with outdoor lighting controllers. |
Buildings.Controls.OBC.Shade | Package with shade controllers. |
Buildings.Controls.OBC.UnitConversions | Package with blocks for unit conversion. Blocks in this package are meant to use when reading data from a building automation system, or writing data to a building automation system, that uses units that are different from the units used by Modelica. |
Buildings.Fluid.Geothermal | Package with models for geothermal heat exchangers. This package has models for borefields with vertical boreholes, and for a single vertical borehole with a U-tube heat exchanger. The borefield models can have any geometrical configuration, and either one or two U-tube heat exchangers. |
Buildings.Occupants | Package with occupant behavior models and functions to simulate the occupancy and the interaction of occupants with air-conditioning and heating systems, windows, blinds, and lighting in residential and office buildings. |
Buildings.Utilities.Cryptographics | Package with a function to compute a SHA1 encrypted string. |
Buildings.Utilities.IO.Files | Package with blocks to write CSV files, JSON files or combi time table files. |
Buildings.Utilities.Plotters | Package with blocks that allow generating time series and scatter plots, and writing these plots to one or several html files. The plots can be deactivated based on an input signal and a time delay, for example, to plot data only while the HVAC system operates for at least 30 minutes. |
The following new components have been added to existing libraries:
Buildings.Controls.OBC.CDL | |
Buildings.Controls.OBC.CDL.Continuous.MultiOr | Block that outputs true boolean signal if and only if any element of the boolean input vector is true. |
Buildings.Controls.OBC.CDL.Continuous.MatrixMin | Block that outputs vector of row- or column-wise minimum values. |
Buildings.Controls.OBC.CDL.Continuous.MatrixMax | Block that outputs vector of row- or column-wise maximum values. |
Buildings.Controls.OBC.CDL.Continuous.MatrixGain | Block that outputs the product of a gain matrix with the input signal vector. |
Buildings.Controls.OBC.CDL.Discrete.MovingMean | Block that outputs the discrete moving mean of a sampled input signal. |
Buildings.Controls.OBC.CDL.Integers.Change | Block that outputs whether its Integer input changed its value, and whether it increased or decreased. |
Buildings.Controls.OBC.CDL.Logical.IntegerSwitch | Block that outputs one of two integer input signals based on a boolean input signal. |
Buildings.Controls.OBC.CDL.Routing.RealExtractor | Block that extracts a scalar signal from a signal vector dependent on an Integer-valued input. |
Buildings.Controls.OBC.CDL.Utilities.SunRiseSet | Block that outputs sunrise and sunset time for each day. |
Buildings.Fluid | |
Buildings.Fluid.HeatExchangers | Added Buildings.Fluid.HeatExchangers.PlateHeatExchangerEffectivenessNTU
which computes the effectiveness of a plate heat exchanger
based on design conditions and current mass flow rates.
|
Buildings.Utilities | |
Buildings.Utilities.Math | Added Bessel, exponential integral, factorial, falling factorial and binomial functions. |
Buildings.Utilities.Psychrometrics.Functions.X_pTphi | Added function to compute humidity mass fraction for given pressure, temperature and relative humidity. |
The following existing components have been improved in a backward compatible way:
Buildings.BoundaryConditions | |
Buildings.BoundaryConditions.WeatherData.ReaderTMY3 | Updated implementation to allow for weather data file that span less than a year and cross New Year,
and for weather data files that span more than a year. This is for IBPSA, #842. |
Buildings.Controls.OBC.CDL | |
Buildings.Controls.OBC.CDL.Logical.Timer | Updated implementation to output accumulated time when input is true .This is for issue 1212. |
Buildings.Controls.OBC.CDL.Logical.TrueDelay | Added parameter delayOnInit to optionally delay the initial true input.This is for issue 1346. |
Buildings.Controls.OBC.ASHRAE.G36_PR1 | |
Buildings.Controls.OBC.ASHRAE.G36_PR1/AHUs.SingleZone.VAV.SetPoints.OutsideAirFlow | Made input connector for occupancy conditionally removable to avoid having to set the
number of occupants as an input if there is no occupancy sensor. This is for issue 1270. |
Buildings.Fluid | |
Buildings.Fluid.Interfaces.ConservationEquation Buildings.Fluid.MixingVolumes.MixingVolume Buildings.Fluid.MixingVolumes.MixingVolumeMoistAir |
Changed model so that the volume is no longer fixed at compilation time. This is for issue 1411. |
Buildings.Media | |
Buildings.Media.Air Buildings.Media.Water Buildings.Media.Antifreeze.PropyleneGlycolWater Buildings.Media.Specialized.Air.PerfectGas |
Improved error message when temperature or mass fraction is outside the allowed range. This is for IBPSA, issue 1045. |
Buildings.Utilities.IO.Python27 | |
Buildings.Utilities.IO.Python27.Functions.exchange |
Refactored setting the PYTHONPATH environment variable.This is for issue 1421. |
The following existing components have been improved in a non-backward compatible way:
Buildings.Airflow.Multizone | |
Buildings.Airflow.Multizone.DoorDiscretizedOperable | Removed parameter CD .For Dymola, a conversion script makes this change. This is for IBPSA, #971. |
Buildings.Airflow.Multizone.EffectiveAirLeakageArea | Removed parameters A , CD and lWet .For Dymola, a conversion script makes this change. This is for IBPSA, #932. |
Buildings.Airflow.Multizone.MediumColumnDynamic | Removed parameter m_flow_nominal .For Dymola, a conversion script makes this change. This is for IBPSA, #970. |
Buildings.Airflow.Multizone.Orifice | Removed parameter lWet .For Dymola, a conversion script makes this change. This is for IBPSA, #932. |
Buildings.Airflow.Multizone.MediumColumnDynamic Buildings.Airflow.Multizone.MediumColumn Buildings.Airflow.Multizone.EffectiveAirLeakageArea Buildings.Airflow.Multizone.Orifice |
Removed parameter allowFlowReversal as this is not meaningful
for these models.For Dymola, a conversion script makes this change. This is for IBPSA, #877. |
Buildings.BoundaryConditions | |
Buildings.BoundaryConditions.WeatherData.BaseClasses.ConvertTime | Added new parameters needed for weather data files that span multiple years.
Models of users are not likely to be affected by this change as this model
is part of the weather data file reader that implements all required changes. This is for IBPSA, #842. |
Buildings.Controls.OBC.ASHRAE | |
Buildings.Controls.OBC.ASHRAE.G36_PR1.AHUs.SingleZone Buildings.Controls.OBC.ASHRAE.G36_PR1.AHUs.MultiZone |
Renamed packages to
Buildings.Controls.OBC.ASHRAE.G36_PR1.AHUs.SingleZone.VAV
and Buildings.Controls.OBC.ASHRAE.G36_PR1.AHUs.MultiZone.VAV ,
and renamed various signals and parameters for consistency.For Dymola, a conversion script makes this change. |
Buildings.Controls.OBC.CDL | |
Buildings.Controls.OBC.CDL.RealExtractSignal | Changed block name from ExtractSignal .For Dymola, a conversion script makes this change. |
Buildings.Controls.OBC.CDL.Continuous.MultiMax | Changed output variable name from yMax to y .For Dymola, a conversion script makes this change. This is for issue 1252. |
Buildings.Controls.OBC.CDL.Continuous.MultiMin | Changed output variable name from yMin to y .For Dymola, a conversion script makes this change. This is for issue 1252. |
Buildings.Fluid | |
Buildings.Fluid.HeatExchangers.DryEffectivenessNTU | Renamed model to
Buildings.Fluid.HeatExchangers.DryCoilEffectivenessNTU
because the convective heat transfer coefficients are for air.For Dymola, a conversion script makes this change. Removed variable Z as it is not used.
|
Buildings.Fluid.HeatExchangers.PlateHeatExchangerEffectivenessNTU | Removed variable Z as it is not used.
|
Buildings.Fluid.HeatExchangers.Ground.Boreholes.BaseClasses.factorial | Renamed function to
Buildings.Utilities.Math.Functions.factorial
because it is also used by the new Geothermal package.For Dymola, a conversion script makes this change. |
Buildings.Fluid.HeatExchangers.Ground.Boreholes | Renamed package to
Buildings.Fluid.Geothermal.Boreholes
due to the introduction of the new Geothermal package.For Dymola, a conversion script makes this change. |
Buildings.Fluid.HeatExchangers.RadiantSlabs.BaseClasses.MassFlowRateMultiplier | Renamed model to
Buildings.Fluid.BaseClasses.MassFlowRateMultiplier
because it is also used by the new Geothermal package.For Dymola, a conversion script makes this change. |
Buildings.Fluid.Sources.FixedBoundary | This model is now obsolete and will be removed in future releases.
The model has been renamed model to
Buildings.Obsolete.Fluid.Sources.FixedBoundary .
Use Buildings.Fluid.Sources.Boundary_pT instead.For Dymola, a conversion script makes this change. |
Buildings.Media | |
Buildings.Media.Refrigerants.R410A | Removed the function pressureSatLiq_T as it was not used.This is for IBPSA, #995. |
Buildings.Utilities.Reports | |
Buildings.Utilities.Reports.Printer Buildings.Utilities.Reports.printRealArray |
Moved Buildings.Utilities.Reports.Printer to
Buildings.Utilities.IO.Files.Printer and moved
Buildings.Utilities.Reports.printRealArray to
Buildings.Utilities.IO.Files.BaseClasses.printRealArray .For Dymola, a conversion script makes this change. This is due to the newly introduced package Buildings.Utilities.IO.Files .
|
The following critical errors have been fixed (i.e., errors that can lead to wrong simulation results):
Buildings.Controls.OBC.CDL | |
Buildings.Controls.OBC.CDL.Logical.Latch | Corrected implementation that causes wrong output at initial stage. This is for issue 1402. |
Buildings.Controls.OBC.CDL.Logical.Toggle | Corrected implementation that causes wrong output at initial stage. This is for issue 1402. |
Buildings.Fluid.Geothermal | |
Buildings.Fluid.Geothermal.Borefields.Data.Soil.SandStone | Corrected wrong thermal properties. This is for IBPSA, #1062. |
Buildings.Fluid.HeatExchangers | |
Buildings.Fluid.HeatExchangers.Heater_T Buildings.Fluid.HeatExchangers.SensibleCooler_T |
Corrected missing propagation of initial conditions. This is for IBPSA, #1016. |
Buildings.ThermalZones.Detailed | |
Buildings.ThermalZones.Detailed.MixedAir | Propagated parameter mSenFac which
increased the thermal capacity of the room air, such as
to account for furniture.This is for issue 1405. |
Buildings.ThermalZones.ReducedOrder | |
Buildings.ThermalZones.ReducedOrder.RC.ThreeElements Buildings.ThermalZones.ReducedOrder.RC.FourElements |
The RC element of the roof roofRC
was flipped to have its port_b on the outside.
The resistances RRem and R
of the roof and floor have been switched
in the documentation.This is for IBPSA, #997. |
The following uncritical errors have been fixed (i.e., errors that do not lead to wrong simulation results, e.g., units are wrong or errors in documentation):
Buildings.Controls.OBC.ASHRAE | |
Buildings.Controls.OBC.ASHRAE.G36_PR1.Generic.SetPoints.OperationMode | Corrected wrong time in the documentation of the parameters. This is for issue 1409. |
Extends from Modelica.Icons.ReleaseNotes (Icon for release notes in documentation).
Modelica definition
Buildings.UsersGuide.ReleaseNotes.Version_5_1_0
Version 5.1.0
Information
Version 5.1.0 adds new libraries, new components and improves various existing components. Version 5.1.0 updates the license to a 3-clause BSD license. It is backward compatible with versions 5.0.0 and 5.0.1.
This release adds a model for propylene glycol - water mixtures, a model for long pipes suited for district heating and cooling simulations, a new valve model whose opening characteristics can be fit to measured data, and idealized models that allow to prescribe the temperature and humidity in any part of a fluid flow system.
The following new libraries have been added:
Buildings.Media.Antifreeze.PropyleneGlycolWater | Package with medium model for propylene glycol - water mixture. The concentration and the medium temperature for which the properties are evaluated can be set when instantiating the medium. |
The following new components have been added to existing libraries:
Buildings.Fluid | |
Buildings.Fluid.Actuators.Valves.TwoWayPolynomial | Two-way valve with opening characteristics specified by a polynomial. This model may be used if a valve characteristics needs to be matched to measured data. |
Buildings.Fluid.FixedResistances.PlugFlowPipe | Pipe with heat loss and transport of the fluid using a plug flow model. This model is applicable for simulation of long pipes such as in district heating and cooling systems. |
Buildings.Fluid.Sources.PropertySource_T Buildings.Fluid.Sources.PropertySource_h |
Model that changes the fluid properties of the medium that flows through it based on input signals. These idealized models can be used to force a certain temperature, enthalpy or humidity in a fluid flow system. |
The following existing components have been improved in a backward compatible way:
Buildings.Airflow.Multizone | |
Buildings.Airflow.Multizone.DoorDiscretizedOpen Buildings.Airflow.Multizone.DoorDiscretizedOperable |
Removed term that assures non-zero flow rate in each path,
reformulated flow balance to ensure that model is symmetric,
and improved implementation to reduce number of calculations. This is for IBPSA, issue 937. |
Buildings.Applications.DataCenters | |
Buildings.Applications.DataCenters.ChillerCooled.Equipment.BaseClasses.PartialParallelElectricEIR | Added constrainedby to declaration of chiller.This is for issue 1118. |
Buildings.Controls.OBC.ASHRAE.G36_PR1 | |
Buildings.Controls.OBC.ASHRAE.G36_PR1.AHUs.SingleZone.VAV.SetPoints.Supply | Revised implementation of fan speed control signal calculation
to remove the hysteresis blocks. This is for issue 1153. |
Buildings.Controls.OBC.CDL | |
Buildings.Controls.OBC.CDL.Continuous.Line | Improved documentation and icon, and added a warning if the limits are used and x1 > x2. |
Buildings.Fluid.SolarCollectors | |
Buildings.Fluid.SolarCollectors.ASHRAE93 Buildings.Fluid.SolarCollectors.EN12975 |
Improved calculation of heat loss. This is for issue 1100. |
Buildings.Fluid.Sources | |
Buildings.Fluid.Sources.Boundary_pT Buildings.Fluid.Sources.Boundary_ph Buildings.Fluid.Sources.FixedBoundary Buildings.Fluid.Sources.MassFlowSource_T Buildings.Fluid.Sources.MassFlowSource_h |
Refactored models to allow using Xi rather
than X as an input.By default, the check on the medium base properties is now removed to reduce translation and simulation time. This is for IBPSA, issue 882. |
Buildings.Fluid.Storage.Stratified | Refactored tank to allow modeling of tanks that have multiple inlets or outlets along the height.
The tank now has for each control volume a fluid port that can be connected from outside the model. This is for issue 1182. |
Buildings.Utilities.IO | |
Buildings.Utilities.IO.Python27 | Added option for a Python object
to be passed from one Python function invocation to the next.
This allows to build up a Python data structure (or to instantiate a Python object),
and do computations on this object at each function invocation. For example,
a Model Predictive Control algorithm or a machine learning algorithm,
implemented in Python, could be fed with data at each time step.
It could then store this data
and use the current and its historical data to feed its algorithm.
Based on this algorithm, it could output a control signal for use in another Modelica model.
The function Buildings.Utilities.IO.Python27.Functions.exchange now takes
two additional arguments: A class that contains a pointer to the Python interpreter
(for efficiency, as this avoids initializing Python at each call), and
a flag that determines whether the Python function returns an object and receives this
object at the next invocation. See
Buildings.Utilities.IO.Python27.UsersGuide and
Buildings.Utilities.IO.Python27.Real_Real for how to use
these two arguments.
Models that use Buildings.Utilities.IO.Python27.Real_Real
will still work as before. The change only affects the low-level function
Buildings.Utilities.IO.Python27.Functions.exchange .
|
Buildings.Utilities.IO.Python27 |
Corrected LibraryDirectory annotation.This is for issue 1160. |
The following critical errors have been fixed (i.e., errors that can lead to wrong simulation results):
Buildings.Fluid.Interfaces | |
Buildings.Fluid.Interfaces.PrescribedOutlet | Corrected error that caused the old model do not track TSet and X_wSet
simultaneously.This is for IBPSA, issue 893. |
Extends from Modelica.Icons.ReleaseNotes (Icon for release notes in documentation).
Modelica definition
Buildings.UsersGuide.ReleaseNotes.Version_5_0_1
Version 5.0.1
Information
Version 5.0.1 corrects an error in Buildings.Fluid.SolarCollectors
that led to too small heat losses if a collector has more than one panel.
Also, Dymola specific annotations to load data files in a GUI have been replaced
for compatibility with other tools.
Otherwise, version 5.0.1 is identical to 5.0.0.
All models simulate with Dymola 2017FD01, Dymola 2018 and JModelica (revision 10374).
The following critical errors have been fixed (i.e., errors that can lead to wrong simulation results):
Buildings.Fluid.SolarCollectors | |
Buildings.Fluid.SolarCollectors.ASHRAE93 Buildings.Fluid.SolarCollectors.EN12975 |
Corrected error in parameterization of heat loss calculation
that led to too small heat losses if a collector has more than one panel. This is for issue 1073. |
Extends from Modelica.Icons.ReleaseNotes (Icon for release notes in documentation).
Modelica definition
Buildings.UsersGuide.ReleaseNotes.Version_5_0_0
Version 5.0.0
Information
Version 5.0.0 is a major new release that contains new packages to model control sequences, a package with control sequences from ASHRAE Guideline 36 and a package with pre-configured models for data center chilled water plants. All models simulate with Dymola 2017FD01, Dymola 2018 and with JModelica (revision 10374).
The following major changes have been done:
-
The package
Buildings.Controls.OBC.CDL
has been added. This package provides elementary blocks to implemented control sequences. The blocks conform to the Control Description Language specification published at http://obc.lbl.gov. -
The package
Buildings.Controls.OBC.ASHRAE.G36_PR1
has been added. This package contains control sequences for variable air volume flow systems according to ASHRAE Guideline 36, public review draft 1. The implementation uses blocks from the above describedBuildings.Controls.OBC.CDL
package, and conforms to the Control Description Language specification. - New models for ideal heaters and sensible coolers, and ideal humidifiers have been added.
- Various models have been improved.
The following new libraries have been added:
Buildings.Applications.DataCenter | Library with component models and pre-configured system models for data centers. |
Buildings.Controls.OBC | Library with basic control blocks and ready-to-use control sequences
from the OpenBuildingControl project
(http://obc.lbl.gov). The subpackage Buildings.Controls.OBC.ASHRAE
contains control sequences
for HVAC systems as described in ASHRAE Guideline 36.The subpackage Buildings.Controls.OBC.CDL
contains libraries with basic control blocks.
These are a part of a Control Description Language (CDL)
currently being developed, which is used to compose
the sequences in Buildings.Controls.OBC.ASHRAE .
The intent of this implementation is that
Modelica models that are conformant with the CDL
can be translated to product lines of different control vendors.
|
Buildings.Fluid.Humidifiers | Package with spray air washer, steam humidifier and a humidifer that adds a water vapor mass flow rate that is proportional to the control input. |
The following new components have been added to existing libraries:
Buildings.Fluid.HeatExchangers | |
Buildings.Fluid.HeatExchangers.Heater_T Buildings.Fluid.HeatExchangers.SensibleCooler_T |
Added these new components to allow modeling a heater and a sensible-only cooler that use an input signal to ideally control their outlet temperature, with optional capacity limitation and optional first order dynamics. |
Buildings.Fluid.MassExchangers | |
Buildings.Fluid.Humidifiers.SprayAirWasher_X Buildings.Fluid.Humidifiers.SteamHumidifier_X |
Added component which allows setting the outlet water vapor mass fraction using an input signal, and controlling it ideally with optional capacity limitation and optional first order dynamics. |
Buildings.Fluid.Sources | |
Buildings.Fluid.Sources.MassFlowSource_WeatherData | Added component which allows prescribing a mass flow rate that has thermal properties obtained from weather data. |
The following existing components have been improved in a backward compatible way:
Buildings.Fluid.Chillers | |
Buildings.Fluid.Chillers.Carnot_TEva Buildings.Fluid.Chillers.Carnot_y |
Added approach temperature to avoid
too large COPs if the temperature lift is small. This is for IBPSA, #698. |
Buildings.Fluid.HeatExchangers | |
Buildings.Fluid.HeatExchangers.DryCoilCounterFlow Buildings.Fluid.HeatExchangers.DryCoilDiscretized Buildings.Fluid.HeatExchangers.WetCoilCounterFlow Buildings.Fluid.HeatExchangers.WetCoilDiscretized |
Improved model so that for certain parameters (dynamic balance,
or steady-state balance and no reverse flow,
or hA-calculation that is independent of temperature),
two fast state variables can be removed. This is for Buildings, #678. Added approximation of diffusion, which is needed for very small flow rates which can happen if fans are off but wind pressure entrains cold air through the HVAC system. This is for Buildings, #1038. |
Buildings.Fluid.HeatPumps | |
Buildings.Fluid.HeatPumps.Carnot_TCon Buildings.Fluid.HeatPumps.Carnot_y |
Added approach temperature to avoid
too large COPs if the temperature lift is small. This is for IBPSA, #698. |
Buildings.Fluid.Movers | |
Buildings.Fluid.Movers.FlowControlled_dp | Added optional input signal for differential pressure measurement, which will then be tracked by the model. |
Buildings.Fluid.Sensors | |
Buildings.Fluid.Sensors.TemperatureTwoPort | Improved optional heat loss model. This is for IBPSA, #840. |
Buildings.Fluid.SolarCollectors | |
Buildings.Fluid.SolarCollectors.ASHRAE93 Buildings.Fluid.SolarCollectors.EN12975 |
Changed models for incidence angles below 60°
in order to increase the accuracy near sunrise and sunset. This is for #785. |
Buildings.ThermalZones.Detailed | |
Buildings.ThermalZones.Detailed.MixedAir | Added an optional input that allows injecting trace substances, such as CO2 release from people, to the room air. |
The following existing components have been improved in a non-backward compatible way:
Buildings.Fluid | |
Buildings.Fluid.HeatExchangers.HeaterCooler_T | Renamed Buildings.Fluid.HeatExchangers.HeaterCooler_T
to Buildings.Fluid.HeatExchangers.PrescribedOutlet
as it now also allows to set the outlet water vapor mass fraction.For Dymola, a conversion script makes this change. This is for IBPSA, #763. |
Buildings.Fluid.MassExchangers.Humidifier_u | Moved model to Buildings.Fluid.Humidifiers.Humidifier_u .Removed parameters use_T_in and T ,
and removed input connector T_in , as these are no
longer needed.For Dymola, the conversion script will remove the parameter settings. For Dymola, a conversion script makes this change. This is for #704. |
Buildings.Fluid.Interfaces | Renamed PrescribedOutletState to PrescribedOutlet
and removed PrescribedOutletStateParameters .This is for IBPSA, #763. |
Buildings.Fluid.HeatExchangers | Removed the function
Buildings.Fluid.HeatExchangers.BaseClasses.appartusDewPoint
as it was nowhere used, and it also has no validation test.This is for Buildings, #724. |
The following critical errors have been fixed (i.e., errors that can lead to wrong simulation results):
Buildings.Airflow | |
Buildings.Airflow.Multizone.EffectiveAirLeakageArea | Corrected error in computation of A which was
A=CD/CDRat * L * dpRat^(0.5-m)) rather than
A=CDRat/CD * L * dpRat^(0.5-m)) .See #743. |
Buildings.Controls | |
Buildings.Controls.Continuous.OffTimer | Corrected implementation as the timer had the wrong
if the simulation did not start at time = 0 .
After the first reset, the value was correct.See IBPSA, #743. |
Buildings.Fluid | |
Buildings.Fluid.Interfaces.TwoPortHeatMassExchanger Buildings.Fluid.Interfaces.FourPortHeatMassExchanger |
Corrected assignment of Q_flow (or Q1_flow
and Q2_flow ).
Previously, these variables were assigned only the sensible heat flow rate,
but they should include the latent heat exhange to be consistent with
the variable naming, and because the cooling coils interpret these variables
as if they contain the latent heat flow rate.This is for #704. |
Buildings.Fluid.HeatExchangers.WetCoilCounterFlow Buildings.Fluid.HeatExchangers.WetCoilDiscretized Buildings.Fluid.HeatExchangers.BaseClasses.HexElementLatent |
Added heat of condensation to coil surface heat balance
and removed it from the air stream.
This gives higher coil surface temperature and avoids
overestimating the latent heat ratio that was
observed in the previous implementation.
The code change was in
Buildings.Fluid.HeatExchangers.BaseClasses.HexElementLatent This is for #711. |
Buildings.Fluid.HeatExchangers.BaseClasses.HADryCoil | Corrected coefficient for temperature-dependency correction
of air-side convection coefficient.
By default, the convection coefficient
is assumed to be temperature-independent, in which cases this
correction has no effect on the results. This is for #698. |
The following uncritical errors have been fixed (i.e., errors that do not lead to wrong simulation results, e.g., units are wrong or errors in documentation):
Buildings.HeatTransfer | |
Buildings.HeatTransfer.Conduction.MultiLayer | Corrected wrong result variable R and UA .
These variables are only used for reporting.
All other calculations are not affected by this error.
|
Extends from Modelica.Icons.ReleaseNotes (Icon for release notes in documentation).
Modelica definition
Buildings.UsersGuide.ReleaseNotes.Version_4_0_0
Version 4.0.0
Information
Version 4.0.0 is a major new release. It is the first release that is based on the Modelica IBPSA Library (https://github.com/ibpsa/modelica). All models simulate with Dymola 2017 FD01 and with JModelica, and the results of these simulators have been cross-compared and are equal within the expected tolerance.
The following major changes have been done:
-
It no longer uses the
Modelica_StateGraph2
library. Instead, it usesModelica.StateGraph
which is part of the Modelica Standard Library. -
The models in
Buildings.Fluid.Movers
have been refactored to increase the numerical robustness at very low speed when the fans or pumps are switched on or off. -
The following new packages have been added:
-
Buildings.Obsolete.DistrictHeatingCooling
with models for district heating and cooling with bi-directional flow in the distribution pipes. -
Buildings.Fluid.FMI.Adaptors
andBuildings.Fluid.FMI.ExportContainers
, which allow export of HVAC systems and of thermal zones as Functional Mockup Units. -
Buildings.Fluid.HeatExchangers.ActiveBeams
, with active beams for cooling and heating. -
Buildings.Fluid.HeatExchangers.DXCoils.WaterCooled
, with water-cooled direct expansion cooling coils. -
Buildings.ThermalZones.ReducedOrder
, with reduced order models of thermal zones based on VDI 6007 that are suitable for district energy simulation.
-
-
The package
Buildings.Rooms
has been renamed toBuildings.ThermalZones.Detailed
. This was done because of the introduction ofBuildings.ThermalZones.ReducedOrder
, which is from theAnnex60
library, in order for thermal zones to be in the same top-level package.
For Dymola, the conversion script will update models that use any model of the packageBuildings.Rooms
. -
The model
Buildings.Fluid.FixedResistances.FixedResistanceDpM
has been refactored. Now, if the hydraulic diameter is not yet known, one can use the simpler modelBuildings.Fluid.FixedResistances.PressureDrop
, otherwise the modelBuildings.Fluid.FixedResistances.HydraulicDiameter
may be used. With this refactoring, also the modelBuildings.Fluid.FixedResistances.SplitterFixedResistanceDpM
has been renamed toBuildings.Fluid.FixedResistances.Junction
and parameters that use the hydraulic diameter have been removed. -
The models
Buildings.HeatTransfer.Conduction.SingleLayer
,Buildings.HeatTransfer.Conduction.MultiLayer
, andBuildings.HeatTransfer.Windows.Window
have been refactored to add the option to place a state at the surface of a construction. This leads in many examples that use the room model to a smaller number of non-linear system of equations and a 20% to 40% faster simulation. -
The models
Buildings.Fluid.HeatPumps.ReciprocatingWaterToWater
andBuildings.Fluid.HeatPumps.ScrollWaterToWater
have been added. Parameters to these models rely on calibration with tabulated heat pump performance data. Python scripts for the calibration of the heat pump models are inBuildings/Resources/src/fluid/heatpumps/calibration
. This is for issue 587.
The following new libraries have been added:
Buildings.Obsolete.DistrictHeatingCooling | Package with models for district heating and cooling with bi-directional flow in the distribution pipes. |
Buildings.Fluid.FMI.Adaptors Buildings.Fluid.FMI.ExportContainers |
Library with adaptors to export HVAC systems and thermal zones
as a Functional Mockup Unit for Model Exchange. This is for Buildings, #506. |
Buildings.Fluid.HeatExchangers.ActiveBeams | Package with models of active beams for space cooling and heating. |
Buildings.Fluid.HeatExchangers.DXCoils.WaterCooled | Package with models of water-cooled direct expansion cooling coils with single speed, variable speed or multi-stage compressor. |
Buildings.Fluid.HeatPumps.Compressors | Package with models of compressors for heat pumps. |
Buildings.ThermalZones.ReducedOrder | Package with reduced order models of thermal zones based on VDI 6007. |
The following new components have been added to existing libraries:
Buildings.Fluid.Sensors | |
Buildings.Fluid.Sensors.Velocity | Sensor for the flow velocity. |
Buildings.Fluid.HeatExchangers | |
Buildings.Fluid.HeatExchangers.EvaporatorCondenser | Model for evaporator/condenser with refrigerant experiencing constant temperature phase change. |
Buildings.Fluid.HeatPumps | |
Buildings.Fluid.HeatPumps.ReciprocatingWaterToWater | Model for water to water heat pump with a reciprocating compressor. |
Buildings.Fluid.HeatPumps.ScrollWaterToWater | Model for water to water heat pump with a scroll compressor. |
Buildings.HeatTransfer.Windows.BaseClasses | |
Buildings.HeatTransfer.Windows.BaseClasses.HeatCapacity | Model for adding a state on the room-facing surface of a window. This closes issue 565. |
Buildings.Media | |
Buildings.Media.Refrigerants.R410A | Model for thermodynamic properties of refrigerant R410A. |
Buildings.Media.Specialized.Water.ConstantProperties_pT | Model for liquid water with constant properties at user-selected temperature. This closes IBPSA, #511. |
Buildings.Utilities.Math | |
Buildings.Utilities.Math.IntegratorWithReset | Integrator with optional input that allows
resetting the state if the input changes from false
to true .This closes IBPSA, #494. |
Buildings.Utilities.Time | |
Buildings.Utilities.Time.CalendarTime | Block that outputs the calendar time, time of the week, hour of the day etc. This closes IBPSA, #501. |
The following existing components have been improved in a backward compatible way:
Buildings.BoundaryConditions | |
Buildings.BoundaryConditions.WeatherData.BaseClasses.Examples.GetHeaderElement Buildings.BoundaryConditions.WeatherData.BaseClasses.getAbsolutePath Buildings.BoundaryConditions.WeatherData.BaseClasses.getHeaderElementTMY3 Buildings.BoundaryConditions.WeatherData.ReaderTMY3 Buildings.BoundaryConditions.SolarGeometry.ProjectedShadowLength |
Refactored the use of Modelica.Utilities.Files.loadResource
to make the model work in JModelica.
This closes
issue 506.
Removed the use of Modelica.Utilities.Files.fullPathName
in Buildings.BoundaryConditions.WeatherData.BaseClasses.getAbsolutePath
which is implicitly done in Modelica.Utilities.Files.loadResource.
Removed in Buildings.BoundaryConditions.WeatherData.BaseClasses.getAbsolutePath
the addition of file:// to file names which do not start
with file:// , or modelica:// .
This is not required when using
Modelica.Utilities.Files.loadResource .
This closes
issue 539.
|
Buildings.BoundaryConditions.WeatherData.ReaderTMY3 | Shifted the computation of the infrared irradiation such that
the results in Buildings.BoundaryConditions.SkyTemperature.Examples.BlackBody
are consistent for both option of the black-body sky temperature calculation.
This closes
IBPSA, #648.
|
Buildings.BoundaryConditions.SolarIrradiation.BaseClasses.SkyClearness | Reduced tolerance for regularization if the sky clearness is near one or eight. This closes IBPSA, #521. |
Buildings.Controls | |
Buildings.Controls.Continuous.LimPID Buildings.Controls.Continuous.PIDHysteresis Buildings.Controls.Continuous.PIDHysteresisTimer |
Added option to reset the control output when an optional Boolean input signal
changes from false to true .This closes IBPSA, #494. |
Buildings.Electrical | |
Buildings.Electrical.DC.Storage.Examples.Battery | Replaced Modelica_StateGraph2 with
Modelica.StateGraph .
This closes
issue 504.
|
Buildings.Examples | |
Buildings.Examples.DualFanDualDuct.ClosedLoop Buildings.Examples.VAVReheat.ClosedLoop |
Added hysteresis to the economizer control to avoid many events.
This change was done in
Buildings.Examples.VAVReheat.Controls.EconomizerTemperatureControl .
This closes
issue 502.
|
Buildings.Examples.DualFanDualDuct.ClosedLoop | Set filteredSpeed=false in fan models to avoid a large
increase in computing time when simulated between t=1.60E7
and t=1.66E7.
|
Buildings.Examples.VAVReheat.ClosedLoop | Changed chilled water supply temperature to 6°C. This closes issue 509. |
Buildings.Examples.ChillerPlant.BaseClasses.Controls.BatteryControl Buildings.Examples.ChillerPlant.BaseClasses.Controls.WSEControl Buildings.Examples.HydronicHeating.TwoRoomsWithStorage Buildings.Examples.Tutorial.Boiler.System7 |
Replaced Modelica_StateGraph2 with
Modelica.StateGraph .
This closes
issue 504.
|
Buildings.HeatTransfer | |
Buildings.HeatTransfer.Conduction.SingleLayer | Added option to place a state at the surface of a construction. This closes issue 565. |
Buildings.HeatTransfer.Conduction.MultiLayer | Added option to place a state at the surface of a construction. This closes issue 565. |
Buildings.HeatTransfer.Windows.Window | Added option to place a state at the surface of a construction. This closes issue 565. |
Buildings.HeatTransfer.Windows.BeamDepthInRoom | Refactored the use of Modelica.Utilities.Files.loadResource .
This closes
issue 506.
|
Buildings.ThermalZones | |
Buildings.ThermalZones.Detailed.CFD Buildings.ThermalZones.Detailed.BaseClasses.CFDExchange |
Refactored the use of Modelica.Utilities.Files.loadResource .
This closes
issue 506.
|
Buildings.ThermalZones.Detailed.MixedAir Buildings.ThermalZones.Detailed.CFD |
Refactored the distribution of the diffuse solar irradiation. Previously, the model assumed that all diffuse irradiation first hits the floor before it is diffusely reflected to all other surfaces. Now, the incoming diffuse solar irradiation is distributed to all surfaces, proportional to their emissivity plus transmissivity times area. This closes issue 451. |
The following existing components have been improved in a non-backward compatible way:
Buildings.BoundaryConditions | |
Buildings.BoundaryConditions.WeatherData.BaseClasses.getHeaderElementTMY3 | This function is used to read location coordinates
from the TMY3 weather data file. The call to
Buildings.BoundaryConditions.WeatherData.BaseClasses.getAbsolutePath
has been removed as it calls the function
Modelica.Utilities.Files.loadResource , whose return value needs
to be known at compilation time to store the weather data in the FMU.
This is not supported by JModelica.
Most models should still work as this call has been added at a higher level
of the model hierarchy. If models don't work, add a call to loadResource
at the top-level.
This closes
Buildings, #506.
|
Buildings.Controls | |
Buildings.Controls.Continuous.PIDHysteresis | Set zer(final k=0) and made
swi , zer and
zer1 protected, as they are for
Buildings.Controls.Continuous.PIDHysteresis .
Only models that access these instances, which typically is not the case,
are affected by this change.
|
Buildings.Controls.Continuous.LimPID Buildings.Controls.Continuous.PIDHysteresis Buildings.Controls.Continuous.PIDHysteresisTimer |
Removed the parameter limitsAtInit as
it is not used.For Dymola, the conversion script will update models that set this parameter. |
Buildings.Controls.SetPoints.Table | Changed protected final parameter nCol to nRow .For Dymola, the conversion script will update models that access this parameter. This is for issue 555. |
Buildings.Fluid.Actuators | |
Buildings.Fluid.Actuators.Dampers.Exponential Buildings.Fluid.Actuators.Dampers.MixingBox Buildings.Fluid.Actuators.Dampers.MixingBoxMinimumFlow Buildings.Fluid.Actuators.Dampers.VAVBoxExponential Buildings.Fluid.Actuators.Dampers.MixingBoxMinimumFlow Buildings.Fluid.Actuators.Valves.ThreeWayEqualPercentageLinear Buildings.Fluid.Actuators.Valves.ThreeWayLinear Buildings.Fluid.Actuators.Valves.TwoWayEqualPercentage Buildings.Fluid.Actuators.Valves.TwoWayLinear Buildings.Fluid.Actuators.Valves.TwoWayPressureIndependent Buildings.Fluid.Actuators.Valves.TwoWayQuickOpening Buildings.Fluid.Actuators.Valves.TwoWayTable |
Renamed the parameter
filteredOpening to
use_inputFilter .For Dymola, the conversion script will update models that access this parameter. This is for IBPSA, #665 |
Buildings.Fluid.Actuators.Dampers.Exponential Buildings.Fluid.Actuators.Dampers.MixingBox Buildings.Fluid.Actuators.Dampers.MixingBoxMinimumFlow Buildings.Fluid.Actuators.Dampers.VAVBoxExponential Buildings.Fluid.Actuators.Dampers.MixingBoxMinimumFlow |
Renamed the parameters
use_v_nominal and all area related parameters,
because m_flow_nominal and v_nominal
are used to compute the area.For Dymola, the conversion script will update models that access this parameter. This is for IBPSA, #544 |
Buildings.Fluid.Chillers | |
Buildings.Fluid.Chillers.Carnot_TEva Buildings.Fluid.Chillers.Carnot_y |
Removed the parameters
effInpEva and
effInpCon .
Now, always the leaving water temperatures are used to compute the coefficient
of performance (COP). Previously, the
entering water temperature could be used, but this can give COPs that are higher than
the Carnot efficiency if the temperature lift is small.
For Dymola, the conversion script will update models.This is for IBPSA, #497 |
Buildings.Fluid.FixedResistances | |
Buildings.Fluid.FixedResistances.FixedResistanceDpM | Renamed
Buildings.Fluid.FixedResistances.FixedResistanceDpM to
Buildings.Fluid.FixedResistances.PressureDrop
and removed the parameters use_dh , dh and ReC .
For Dymola, the conversion script will update models.
If a model needs to be used that allows specifying dh and ReC ,
then the new model
Buildings.Fluid.FixedResistances.HydraulicDiameter can be used.
|
Buildings.Fluid.FixedResistances.SplitterFixedResistanceDpM | Renamed
Buildings.Fluid.FixedResistances.SplitterFixedResistanceDpM to
Buildings.Fluid.FixedResistances.Junction
and removed the parameters use_dh , dh and ReC .
For Dymola, the conversion script will update models.
If a model needs to be used that allows specifying dh and ReC ,
then use Buildings.Fluid.FixedResistances.Junction with
dp_nominal = 0 (which removes the pressure drop) and use
Buildings.Fluid.FixedResistances.HydraulicDiameter at each fluid port.
|
Buildings.Fluid.FMI | |
Buildings.Fluid.FMI.InletAdaptor Buildings.Fluid.FMI.OutletAdaptor Buildings.Fluid.FMI.TwoPort Buildings.Fluid.FMI.TwoPortComponent |
Renamed
Buildings.Fluid.FMI.InletAdaptor to
Buildings.Fluid.FMI.Adaptors.Inlet ,renamed Buildings.Fluid.FMI.OutletAdaptor to
Buildings.Fluid.FMI.Adaptors.Outlet ,renamed Buildings.Fluid.FMI.TwoPort to
Buildings.Fluid.FMI.ExportContainers.PartialTwoPort ,renamed Buildings.Fluid.FMI.TwoPortComponent to
Buildings.Fluid.FMI.ExportContainers.ReplaceableTwoPort .
This was due to the restructuring of the Buildings.Fluid.FMI
package for
Buildings, #506.For Dymola, the conversion script updates these models. |
Buildings.Fluid.HeatExchangers | |
Buildings.Fluid.HeatExchangers.DXCoils.AirCooled.SingleSpeed Buildings.Fluid.HeatExchangers.DXCoils.AirCooled.VariableSpeed Buildings.Fluid.HeatExchangers.DXCoils.AirCooled.MultiStage Buildings.Fluid.HeatExchangers.DXCoils.Data |
Renamed
Buildings.Fluid.HeatExchangers.DXCoils.AirCooled.SingleSpeed toBuildings.Fluid.HeatExchangers.DXCoils.AirCooled.SingleSpeed ,Buildings.Fluid.HeatExchangers.DXCoils.AirCooled.VariableSpeed toBuildings.Fluid.HeatExchangers.DXCoils.AirCooled.VariableSpeed ,Buildings.Fluid.HeatExchangers.DXCoils.AirCooled.MultiStage toBuildings.Fluid.HeatExchangers.DXCoils.AirCooled.MultiStage andBuildings.Fluid.HeatExchangers.DXCoils.Data toBuildings.Fluid.HeatExchangers.DXCoils.AirCooled.Data .This was due to the addition of the new package Buildings.Fluid.HeatExchangers.DXCoils.WaterCooled .
This is for
Buildings, #635.For Dymola, the conversion script updates these models. |
Buildings.Fluid.HeatPumps | |
Buildings.Fluid.HeatPumps.Carnot_TEva Buildings.Fluid.HeatPumps.Carnot_y |
Removed the parameters
effInpEva and
effInpCon .
Now, always the leaving water temperatures are used to compute the coefficient
of performance (COP). Previously, the
entering water temperature could be used, but this can give COPs that are higher than
the Carnot efficiency if the temperature lift is small.
For Dymola, the conversion script will update models.This is for IBPSA, #497 |
Buildings.Fluid.HeatExchangers.Boreholes | Moved the package Buildings.Fluid.HeatExchangers.Boreholes to
Buildings.Fluid.Geothermal.Boreholes .
This is for compatibility with an ongoing model development that will include
a borefield model.For Dymola, the conversion script will update models that use any model of the package Buildings.Fluid.HeatExchangers.Boreholes .
|
Buildings.Fluid.Movers | Removed the function
Buildings.Fluid.Movers.BaseClasses.Characteristics.flowApproximationAtOrigin
and changed the arguments of the function
Buildings.Fluid.Movers.BaseClasses.Characteristics.pressure .This was done due to the refactoring of the fan and pump model for low speed. This is for IBPSA, #458. Users who simply use the existing model in Buildings.Fluid.Movers are not affected by
this change as the function are called by a low-level implementation only.
|
Buildings.Fluid.Movers.
Buildings.Fluid.Movers.FlowControlled_dp Buildings.Fluid.Movers.FlowControlled_m_flow Buildings.Fluid.Movers.SpeedControlled_Nrpm Buildings.Fluid.Movers.SpeedControlled_y |
Renamed the parameter
filteredSpeed to
use_inputFilter .For Dymola, the conversion script will update models that access this parameter. This is for IBPSA, #665 |
Buildings.Fluid.HeatExchangers.CoolingTowers | Changed the name of the function
Buildings.Fluid.HeatExchangers.CoolingTowers.BaseClasses.Characteristics.efficiency
to
Buildings.Fluid.HeatExchangers.CoolingTowers.BaseClasses.Characteristics.normalizedPower .
Changed the name of the record
Buildings.Fluid.HeatExchangers.CoolingTowers.BaseClasses.Characteristics.efficiencyParameters
to
Buildings.Fluid.HeatExchangers.CoolingTowers.BaseClasses.Characteristics.fan ,
and changed the parameter of this record from
eta to r_P .
This change was done as the performance is for the relative power consumption, and not the fan
efficiency, as the old parameter name suggests.
Users who use the default parameters are not affected by this change.
If the default parameters were changed, then for Dymola,
the conversion script will update the model.
|
Buildings.HeatTransfer | |
Buildings.HeatTransfer.BaseClasses.TransmittedRadiation Buildings.HeatTransfer.BaseClasses.WindowRadiation |
Refactored the model to allow separate treatment for the diffuse and direct irradiation, which is needed for issue 451. |
Buildings.HeatTransfer.Conduction.BaseClasses.PartialConstruction | Removed parameter A as it is already declared in
Buildings.HeatTransfer.Conduction.BaseClasses.PartialConductor
which is often used with this class.
|
Buildings.ThermalZones | |
Buildings.ThermalZones.Detailed | Moved package from Buildings.Rooms to Buildings.ThermalZones.Detailed .
This was done because Buildings has a new package
Buildings.ThermalZones.ReducedOrder with reduced order building models.
Hence, the more detailed room models should be in the same top-level package as they
are also for modeling of thermal zones.For Dymola, the conversion script will update models that use any model of the package Buildings.ThermalZones .
|
Buildings.ThermalZones.Detailed.CFD Buildings.ThermalZones.Detailed.MixedAir Buildings.ThermalZones.Detailed.BaseClasses.CFDAirHeatMassBalance Buildings.ThermalZones.Detailed.BaseClasses.MixedAirHeatMassBalance Buildings.ThermalZones.Detailed.BaseClasses.PartialAirHeatMassBalance Buildings.ThermalZones.Detailed.BaseClasses.RoomHeatMassBalance |
Refactored implementation of latent heat gain for
Buildings, #515.
Users who simply use Buildings.MixedAir.Rooms.CFD or
Buildings.MixedAir.Rooms.MixedAir will not be affected by this change,
except if they access variables related to the heat gain.
|
Buildings.ThermalZones.Detailed.BaseClasses.AirHeatMassBalanceMixed Buildings.ThermalZones.Detailed.BaseClasses.MixedAirHeatGain |
Removed models as these are no longer needed due after the refactoring of the room model for Buildings, #515. |
Buildings.ThermalZones.Detailed.BaseClasses.RoomHeatMassBalance Buildings.ThermalZones.Detailed.BaseClasses.SolarRadiationExchange |
Refactored the distribution of the diffuse solar irradiation, which required replacing the
input and output signals.
Previously, the model assumed that all diffuse irradiation first hits the floor before it is
diffusely reflected to all other surfaces. Now, the incoming diffuse solar irradiation is distributed
to all surfaces, proportional to their emissivity plus transmissivity times area. This closes issue 451. |
Buildings.ThermalZones.Detailed.BaseClasses.CFDHeatGain | Renamed model from Buildings.ThermalZones.Detailed.BaseClasses.CFDHeatGain to
Buildings.ThermalZones.Detailed.BaseClasses.HeatGain .This is for Buildings, #515. |
Buildings.ThermalZones.Detailed.BaseClasses.CFDExchange | Removed the parameter uStart as it is not required. As this is in a base
class, users typically won't need to change their models
unless they use this base class directly.This is for Buildings, #579. |
Buildings.Utilities | |
Buildings.Utilities.Psychrometrics.WetBul_pTX | Deleted the model
Buildings.Utilities.Psychrometrics.WetBul_pTX
as the same functionality is provided by
Buildings.Utilities.Psychrometrics.TWetBul_TDryBulXi .
Users who use Buildings.Utilities.Psychrometrics.WetBul_pTX
need to replace the model manually and reconnect the input and output ports.This is for IBPSA, #475. |
The following critical errors have been fixed (i.e., errors that can lead to wrong simulation results):
Buildings.Fluid | |
Buildings.Fluid.HeatExchangers.DXCoils.AirCooled.MultiStage Buildings.Fluid.HeatExchangers.DXCoils.AirCooled.SingleSpeed Buildings.Fluid.HeatExchangers.DXCoils.AirCooled.VariableSpeed Buildings.Fluid.HeatExchangers.DXCoils.AirCooled.BaseClasses.Evaporation |
Corrected the computation of the wet bulb state in the model that computes the reevaporation of water vapor into the air stream when the coil is switched off. The results change slightly. This closes issue 520 and integrates the change of IBPSA, #474. |
Buildings.Fluid.Storage.StratifiedEnhancedInternalHex | Corrected computation of the heat exchanger location which was wrong
if hHex_a < hHex_b , e.g., the port a of the heat exchanger
is below the port b.
This closes
issue 531.
|
Buildings.Examples | |
Buildings.Examples.VAVReheat.ClosedLoop Buildings.Examples.DualFanDualDuct.ClosedLoop Buildings.Examples.VAVReheat.Controls.Economizer |
Corrected the economizer controller which closed the outside air when there was no freeze concern during summer. This closes issue 511. |
The following uncritical errors have been fixed (i.e., errors that do not lead to wrong simulation results, e.g., units are wrong or errors in documentation):
Buildings.Electrical | |
Buildings.Electrical.AC.OnePhase.Sources.Grid Buildings.Electrical.AC.ThreePhasesUnbalanced.Sources.Grid Buildings.Electrical.AC.ThreePhasesUnbalanced.Sources.Grid_N |
Corrected sign error in documentation string of
variable P .
|
Buildings.Fluid | |
Buildings.Fluid.HeatExchanger.WetCoilCounterFlow Buildings.Fluid.HeatExchanger.WetCoilDiscretized |
Redeclared Medium2 to force it to be a subclass
of Modelica.Media.Interfaces.PartialCondensingGases .This is for issue 544. |
Buildings.Fluid.Storage | Removed medium declaration, which is not needed and inconsistent with
the declaration in the base class. This is for issue 544. |
Buildings.ThermalZones.Detailed.Validation.BESTEST | |
Buildings.ThermalZones.Detailed.Validation.BESTEST.Cases9xx.Case900 Buildings.ThermalZones.Detailed.Validation.BESTEST.Cases9xx.Case900 |
Added missing parameter keyword,
which is required as the variable (for the materials) is assigned to a parameter.
This is for
issue 543.
|
Extends from Modelica.Icons.ReleaseNotes (Icon for release notes in documentation).
Modelica definition
Buildings.UsersGuide.ReleaseNotes.Version_3_0_0
Version 3.0.0
Information
Version 3.0.0 is a major new release.
The following major changes have been done:
-
Electrochromic windows have been added. See
Buildings.ThermalZones.Detailed.Examples.ElectroChromicWindow
. -
The models in
Buildings.Fluid.Movers
can now be configured to use three different control input signals: a continuous signal (depending on the model either normalized speed, speed in rpm, prescribed mass flow rate or prescribed head), discrete stages of these quantities, or on/off. The models also have been refactored to make their implementation clearer. -
The new package
Buildings.Fluid.HeatPumps
has been added. This package contains models for idealized heat pumps whose COP changes proportional to the change in COP of a Carnot cycle, with an optional correction for the part load efficiency. -
Various models, in particular in the package
Buildings.Electrical
, have been reformulated to comply with the Modelica Language Definition. All models comply with the pedantic Modelica check of Dymola.
The following new libraries have been added:
Buildings.Fluid.HeatPumps | Library with heat pump models.
This library contains models for idealized heat pumps
whose COP changes proportional to the change in COP of a Carnot cycle.
Optionally, a part load efficiency curve can be specified.
The model Buildings.Fluid.HeatPumps.Carnot_TCon
takes as a control input the leaving
condenser fluid temperature, and the model
Buildings.Fluid.HeatPumps.Carnot_y takes as
a control signal the compressor speed.
|
The following new components have been added to existing libraries:
Buildings.BoundaryConditions.SolarGeometry | |
Buildings.BoundaryConditions.SolarGeometry.ProjectedShadowLength | Block that computes the length of a shadow projected onto a horizontal plane into the direction that is perpendicular to the azimuth of a surface. |
Buildings.Electrical | |
Buildings.Electrical.AC.ThreePhasesUnbalanced.Interfaces.Adapter3to3 Buildings.Electrical.AC.ThreePhasesUnbalanced.Interfaces.Connection3to3Ground_n Buildings.Electrical.AC.ThreePhasesUnbalanced.Interfaces.Connection3to3Ground_p |
Adapters for unbalanced three phase systems which are required because the previous formulation used connect statements that violate the Modelica Language Definition. This change was required to enable pedantic model check and translation in Dymola 2016 FD01. This is for #426. |
Buildings.Fluid.Chillers | |
Buildings.Fluid.Chillers.Carnot_TEva | Chiller model whose efficiency changes with temperatures similarly to a change in Carnot efficiency. The control input signal is the evaporator leaving fluid temperature. This is for IBPSA, #353. |
Buildings.Fluid.Sensors | |
Buildings.Fluid.Sensors.PPM Buildings.Fluid.Sensors.PPMTwoPort |
Sensors that measure trace substances in parts per million. |
Buildings.HeatTransfer.Windows | |
Buildings.HeatTransfer.Windows.BeamDepthInRoom | Block that computes the maximum distance at which a solar beam that enters the window hits the workplane. |
Buildings.Utilities.Math | |
Buildings.Utilities.Math.Functions.smoothInterpolation | Function that interpolates for vectors xSup[] , ySup[]
and independent variable x .
The interpolation is done using a cubic Hermite spline with linear extrapolation.
|
The following existing components have been improved in a backward compatible way:
Buildings.Fluid | |
Buildings.Fluid.Actuators.Valves.ThreeWayEqualPercentageLinear Buildings.Fluid.Actuators.Valves.ThreeWayLinear |
Changed the default value for valve leakage
parameter l from 0 to 0.0001 .
This is the same value as is used for the two-way valves,
and avoids an assertion that would be triggered if l=0 .
|
Buildings.Fluid.Geothermal.Boreholes.UTube | Updated code for 64 bit on Linux and Windows. This closes issue 485. |
Buildings.Fluid.HeatExchangers.DryEffectivenessNTU | Reformulated model to allow translation in OpenModelica. This is for issue #490. |
Buildings.Fluid.Chillers.Carnot | Changed the sign convention for dTEva_nominal .
Now, this quantity needs to be negative.
This change was done to be consistent with other models.
In this version, a warning will be written if the sign
is not updated, but the results will be the same.
In future versions the warning will be
changed to an error.The parameters dTEva_nominal and
dTCon_nominal are now used
to assign default values for the nominal mass flow rates.
|
Buildings.Fluid.MixingVolumes.MixingVolume Buildings.Fluid.MixingVolumes.MixingVolumeMoistAir |
Added the parameter use_C_flow . If set
to true , an input connector will be enabled that can be used
to add a trace substance flow rate, such as CO2, to the volume.
|
Buildings.Fluid.Movers.FlowControlled_dp Buildings.Fluid.Movers.FlowControlled_m_flow Buildings.Fluid.Movers.FlowControlled_Nrpm Buildings.Fluid.Movers.FlowControlled_y |
Added the parameter inputType which allows
to set the input as an continuous input signal,
to set the input as an Integer input signal that selects the stage of the mover,
or to remove the input connector and use a parameter
to assign the control signal.
|
Buildings.Fluid.Storage.StratifiedEnhancedInternalHex | Added option to set dynamics of heat exchanger material separately from the dynamics of the fluid inside the heat exchanger. This is for issue #434. |
Buildings.Fluid.Interfaces.FourPortHeatMassExchanger Buildings.Fluid.Interfaces.TwoPortHeatMassExchanger |
Propagated parameter allowFlowReversal
which can cause a simpler energy balance to be used.
|
Buildings.Fluid.Interfaces.PartialTwoPortTransport | Implemented more efficient computation of port_a.Xi_outflow
and port_a.C_outflow when allowFlowReversal=false .
This is for
IBPSA issue 305.
|
Buildings.Fluid.BaseClasses.FlowModels.basicFlowFunction_dp Buildings.Fluid.BaseClasses.FlowModels.basicFlowFunction_m_flow |
Refactored for a more efficient implementation.
Removed double declaration of smooth(..) and smoothOrder
and changed Inline=true to LateInline=true .
This is for
IBPSA issue 301
and for IBPSA issue 279.
|
Buildings.ThermalZones | |
Buildings.ThermalZones.Detailed.BaseClasses.CFDExchange | Set start and fixed
attributes in
u[nWri](start=_uStart, each fixed=true)
to avoid a warning in Dymola 2016 about unspecified initial conditions.
This closes
issue 422.Set start and fixed
attributes in
firstTrigger(start=false, fixed=true) ,
retVal(start=0, fixed=true) and modTimRea(fixed=false)
to avoid such a warning in the pedantic Modelica check in Dymola 2016.
This closes
issue 459.
|
Buildings.ThermalZones.Detailed.CFD | Updated code for 64 bit on Linux and Windows. This closes issue 485. |
Buildings.Utilities.Math.Functions | Refactored Buildings.Utilities.Math.Functions.inverseXRegularized
to make it more efficient as it is used in many steady-state energy balances.
This closes
IBPSA issue 302.
|
The following existing components have been improved in a non-backward compatible way:
Buildings.BoundaryConditions | |
Buildings.BoundaryConditions.SkyTemperature.BlackBody Buildings.BoundaryConditions.WeatherData.Bus |
Renamed the connector from radHorIR to HHorIR
This is for
IBPSA issue 376.
For Dymola, the conversion script updates these connections.
However, this also results in a renaming of the weather bus variable
weaBus.radHorIR to HHorIR , which may
require a manual update.
|
Buildings.Fluid | |
Buildings.Fluid.Interfaces.StaticTwoPortConservationEquation | Removed the constant sensibleOnly and
introduced instead the parameter use_mWat_flow .
The new parameter, if set to true , will enable an input connector
that can be used to add water to the conservation equation.
For Dymola, the conversion script updates the model for these changes.
|
Buildings.Fluid.Chillers.Carnot | Renamed the model to Buildings.Fluid.Chillers.Carnot_y
due to the addition of the new model Buildings.Fluid.Chillers.Carnot_TEva .
In addition, the following parameter names were changed:
use_eta_Carnot was changed to use_eta_Carnot_nominal , and
etaCar was changed to etaCarnot_nominal .
This is for
IBPSA issue 353.
For Dymola, the conversion script removes these parameters.
|
Buildings.Fluid.Movers.FlowControlled_dp Buildings.Fluid.Movers.FlowControlled_m_flow Buildings.Fluid.Movers.FlowControlled_Nrpm Buildings.Fluid.Movers.FlowControlled_y |
Removed the parameters use_powerCharacteristics
and motorCooledByFluid as these are already
declared in the performance data record per .
This is for issue
#457.
For Dymola, the conversion script removes these parameters.
|
Buildings.Fluid.Movers.FlowControlled_dp Buildings.Fluid.Movers.FlowControlled_m_flow Buildings.Fluid.Movers.FlowControlled_Nrpm Buildings.Fluid.Movers.FlowControlled_y |
Removed the public variable r_N .
This is for
IBPSA issue 417.
For Dymola, the conversion script removes
assignments of r_N(start) .
|
Buildings.Fluid.Movers.FlowControlled_dp Buildings.Fluid.Movers.FlowControlled_m_flow |
Write a warning if no pressure curve is provided because
the efficiency calculation can only be done correctly if a pressure curve
is provided. The warning can be suppressed by providing a pressure curve, or
by setting nominalValuesDefineDefaultPressureCurve=true .
|
Buildings.Fluid.Movers.Data | Replaced the parameters
Buildings.Fluid.Movers.Data.FlowControlled ,
Buildings.Fluid.Movers.Data.SpeedControlled_y , and
Buildings.Fluid.Movers.Data.SpeedControlled_Nrpm by
the parameter
Buildings.Fluid.Movers.Data.Generic
which is used for all four types of movers.
This is for
IBPSA issue 417.
This change allows to correctly compute the fan or pump power also for the models
Buildings.Fluid.Movers.FlowControlled_dp ,
Buildings.Fluid.Movers.FlowControlled_m_flow
for speeds that are different from the nominal speed, provided that the user
specifies the pressure curve.
For Dymola, the conversion script updates this parameter.In the previous record Buildings.Fluid.Movers.Data.SpeedControlled_Nrpm ,
changed the parameter N_nominal to speed_rpm_nominal .
This is for
IBPSA issue 396.
For Dymola, the conversion script updates this parameter.
|
Buildings.Fluid.BaseClasses.PartialThreeWayResistance Buildings.Fluid.Movers.BaseClasses.PartialFlowMachine Buildings.Fluid.Movers.FlowControlled_dp Buildings.Fluid.Movers.FlowControlled_m_flow Buildings.Fluid.Movers.FlowControlled_Nrpm Buildings.Fluid.Movers.FlowControlled_y Buildings.Fluid.Actuators.Valves.ThreeWayEqualPercentageLinear Buildings.Fluid.Actuators.Valves.ThreeWayLinear Buildings.Fluid.Actuators.Valves.TwoWayEqualPercentage |
Removed parameter dynamicBalance that overwrote the setting
of energyDynamics and massDynamics .
This is for
IBPSA, issue 411.
For Dymola, the conversion script updates the models.
|
Buildings.Fluid.Interfaces.PartialTwoPort | Renamed the protected parameters
port_a_exposesState , port_b_exposesState and
showDesignFlowDirection .
This is for
IBPSA issue 349
and
IBPSA issue 351.
For Dymola, the conversion script updates models
that extend from Buildings.Fluid.Interfaces.PartialTwoPort .
|
Buildings.Fluid.Interfaces.FourPort | Renamed model to Buildings.Fluid.Interfaces.PartialFourPort and
removed the parameters
h_outflow_a1_start ,
h_outflow_b1_start ,
h_outflow_a2_start and
h_outflow_b2_start
to make the model similar to Buildings.Fluid.Interfaces.PartialTwoPort .
See IBPSA issue 299
for a discussion.
For Dymola, the conversion script updates models
that extend from Buildings.Fluid.Interfaces.FourPort .
|
Buildings.Fluid.Interfaces.StaticTwoPortConservationEquation |
Revised implementation of conservation equations and
added default values for outlet quantities at port_a
if allowFlowReversal=false .
This is for IBPSA issue 281.
Also, revised implementation so that equations are always consistent
and do not lead to division by zero,
also when connecting a prescribedHeatFlowRate
to MixingVolume instances.
Renamed use_safeDivision to prescribedHeatFlowRate .
See IBPSA issue 282
for a discussion.
For users who simply instantiate existing component models, this change is backward
compatible.
However, developers who implement component models that extend from
Buildings.Fluid.Interfaces.StaticTwoPortConservationEquation may need to update
the parameter use_safeDivision and use instead prescribedHeatFlowRate .
See the model documentation.
|
Buildings.ThermalZones | |
Buildings.ThermalZones.Detailed.MixedAir Buildings.ThermalZones.Detailed.CFD |
These models can now be used with electrochromic windows.
This required to change the glass properties
tauSol , rhoSol_a and rhoSol_b
to be arrays. For example, to convert an existing model, use
tauSol={0.6} instead of tauSol=0.6 .
For Dymola, the conversion script will automatically
update existing models.
|
Buildings.Obsolete | |
Buildings.Obsolete.Fluid.Movers Buildings.Obsolete.Media |
Removed these packages which have models from release 2.0.0. |
The following critical errors have been fixed (i.e., errors that can lead to wrong simulation results):
Buildings.Fluid.Chillers | |
Buildings.Fluid.Chillers.Carnot | Corrected wrong computation of state of leaving fluid
staB1 and staB2
for the configuration without flow reversal.
The previous implementation mistakenly used the inStream operator.
This is for
issue 476
|
The following uncritical errors have been fixed (i.e., errors that do not lead to wrong simulation results, e.g., units are wrong or errors in documentation):
Buildings.Electrical | |
Buildings.Electrical.Interfaces.PartialWindTurbine | Reformulated test for equality of Real variables. This closes
issue 493.
|
Buildings.HeatTransfer | |
Buildings.HeatTransfer.Conduction.SingleLayer Buildings.HeatTransfer.Data.BaseClasses |
Reformulated test for equality of Real variables. This closes
issue 493.
|
Buildings.Fluid | |
Buildings.Fluid.FMI.FlowSplitter_u | Corrected wrong assert statement. This closes issue 442. |
Buildings.Fluid.Chillers.Carnot | Corrected wrong assert statement for test on the efficiency function. This closes issue 468. |
Buildings.Media | |
Buildings.Media.Specialized.Water.TemperatureDependentDensity | Removed dublicate entry of smooth and smoothOrder .
This is for
IBPSA issue 303.
|
Buildings.ThermalZones | |
Buildings.ThermalZones.Detailed.BaseClasses.MixedAirHeatGain | Reformulated test for equality of Real variables. This closes
issue 493.
|
Buildings.Utilities.Math | |
Buildings.Utilities.Math.Functions.BaseClasses.der_2_regNonZeroPower Buildings.Utilities.Math.Functions.BaseClasses.der_polynomial Buildings.Utilities.Math.Functions.BaseClasses.der_regNonZeroPower |
Corrected wrong derivative implementation and improved their regression tests. This is for IBPSA issue 303. |
Buildings.Utilities.Psychrometrics | |
Buildings.Utilities.Psychrometrics.Density_pTX | Corrected wrong default component name. |
Buildings.Utilities.Psychrometrics.Functions.saturationPressure | Changed smoothOrder from 5 to 1 as
Buildings.Utilities.Math.Functions.spliceFunction is only once
continuously differentiable.
Inlined the function.
|
Buildings.Utilities.IO.Python27 | |
Buildings.Utilities.IO.Python27.exchange | Updated Python implementation to allow compiling code
on 64 bit Linux. Previously, on Linux a segmentation fault
occurred during run-time if 64 bit code rather than
32 bit code was generated. This is now corrected. Also, Windows 64 bit binaries have been added. This closes issue 287. |
Extends from Modelica.Icons.ReleaseNotes (Icon for release notes in documentation).
Modelica definition
Buildings.UsersGuide.ReleaseNotes.Version_2_1_0
Version 2.1.0
Information
Version 2.1.0 is fully compatible with version 2.0.0.
It adds the package Buildings.Fluid.FMI
that provides containers
for exporting thermofluid flow components as FMUs.
It also updates the temperature sensor to optionally simulate heat losses,
and it contains bug fixes for the trace substance sensor if used without flow reversal.
Improvements have been made to various models to reduce the simulation time, and
to Buildings.Examples.Tutorial.Boiler
to simplify the control implementation.
The following new libraries have been added:
Buildings.Fluid.FMI | This package contains blocks that serve as containers for exporting
models from Buildings.Fluid as a Functional Mockup Unit (FMU).This allows using models from Buildings.Fluid , add them
to a block that only has input and output signals, but no acausal connectors,
and then export the model as a Functional Mockup Unit.
Models can be individual models or systems that are composed of various
models.
For more information, see the
User's Guide.
|
The following existing components have been improved in a backward compatible way:
Buildings.Examples | |
Buildings.Examples.Tutorial.Boiler.System5 Buildings.Examples.Tutorial.Boiler.System6 Buildings.Examples.Tutorial.Boiler.System7 |
Changed control input for conPIDBoi and set
reverseAction=true
to address issue
#436.
|
Buildings.Fluid | |
Buildings.Fluid.Chillers.Carnot Buildings.Fluid.HeatExchangers.DXCoils.BaseClasses.PartialDXCoil Buildings.Fluid.HeatExchangers.HeaterCooler_u Buildings.Fluid.MassExchangers.Humidifier_u |
Set parameter prescribedHeatFlowRate=true
which causes a simpler energy balance to be used.
|
Buildings.Fluid.Sensors.TemperatureTwoPort | Added option to simulate thermal loss, which is useful if the sensor is used to measure the fluid temperature in a system with on/off control for the mass flow rate. |
Buildings.Fluid.SolarCollectors.ASHRAE93 Buildings.Fluid.SolarCollectors.EN12975 |
Corrected sign error in computation of heat loss
that prevents the medium to exceed Medium.T_min
or Medium.T_max . With the previous implementation,
an assertion may be generated unnecessarily rather than
the model guiding against the violation of these bounds.
|
Buildings.Fluid.MixingVolumes.BaseClasses.PartialMixingVolume | Added test on allowFlowReversal in criteria
about what energy balance implementation to use.
This causes simpler models, for example when exporting
Buildings.Fluid.HeatExchangers.HeaterCooler_u
as an FMU.
|
The following critical errors have been fixed (i.e., errors that can lead to wrong simulation results):
Buildings.Fluid | |
Buildings.Fluid.Sensors.TraceSubstanceTwoPort | Corrected wrong sensor signal if allowFlowReversal=false .
For this setting, the sensor output was for the wrong flow direction.
This corrects
issue 249.
|
The following uncritical errors have been fixed (i.e., errors that do not lead to wrong simulation results, e.g., units are wrong or errors in documentation):
Buildings.Fluid | |
Buildings.Fluid.Interfaces.ConservationEquation Buildings.Fluid.Interfaces.StaticTwoPortConservationEquation |
Corrected documentation. |
Extends from Modelica.Icons.ReleaseNotes (Icon for release notes in documentation).
Modelica definition
Buildings.UsersGuide.ReleaseNotes.Version_2_0_0
Version 2.0.0
Information
Version 2.0.0 is a major release that contains various new packages, models and improvements.
The following major additions have been done in version 2.0:
-
A CFD model
that is embedded in a thermal zone has been added.
This model is implemented in
Buildings.ThermalZones.Detailed.CFD
. The CFD model is an implementation of the Fast Fluid Dynamics code that allows three-dimensional CFD inside a thermal zone, coupled to building heat transfer, HVAC components and feedback control loops. -
A new package
Buildings.Electrical
has been added. This package allows studying buildings to electrical grid integration. It includes models for loads, transformers, cables, batteries, PV and wind turbines. Models exist for DC and AC systems with two- or three-phase that can be balanced and unbalanced. The models compute voltage, current, active and reactive power based on the quasi-stationary assumption or using the dynamic phasorial representation. -
The new package
Buildings.Controls.DemandResponse
contains models for demand response simulation. -
The new package
Buildings.Controls.Predictors
contains a data-driven model that predicts the electrical load of a building. The prediction can be done either using an average baseline or a linear regression with respect to outside temperature. For both, optionally a day-of adjustment can be made.
The tables below give more detailed information to the revisions of this library compared to the previous release 1.6 build 1.
The following new libraries have been added:
Buildings.Electrical | Library for electrical grid simulation that allows to study building to electrical grid integration. The library contains models of loads, generation and transmission for DC and AC systems. |
Buildings.Controls.DemandResponse | Library with a model for demand response prediction. |
Buildings.Controls.Predictors | Library with a data-driven model that predicts the electrical load of a building. The prediction can be done either using an average baseline or a linear regression with respect to outside temperature. For both, optionally a day-of adjustment can be made. |
The following new components have been added to existing libraries:
Buildings.Fluid | |
Buildings.Fluid.Actuators.Valves.TwoWayPressureIndependent | Model of a pressure-independent two way valve. |
Buildings.Fluid.HeatExchangers.HeaterCooler_T | Model of a heater or cooler that takes as an input the set point for the temperature of the fluid that leaves the component. The set point is tracked exactly if the component has sufficient capacity. Optionally, the component can be configured to compute a dynamic rather than a steady-state response. |
Buildings.Utilities | |
Buildings.Utilities.Psychrometrics.Phi_pTX Buildings.Utilities.Psychrometrics.Functions.phi_pTX |
Block and function that computes the relative humidity for given pressure, temperature and water vapor mass fraction. |
Buildings.ThermalZones | |
Buildings.ThermalZones.Detailed.CFD | Room model that computes the room air flow
using computational fluid dynamics (CFD).
The CFD simulation is coupled to the thermal simulation of the room
and, through the fluid port, to the air conditioning system.
Currently, the supported CFD program is the
Fast Fluid Dynamics (FFD) program.
See Buildings.ThermalZones.Detailed.UsersGuide.CFD
for detailed explanations.
|
The following existing components have been improved in a backward compatible way:
Buildings.BoundaryConditions | |
Buildings.BoundaryConditions.WeatherData.ReaderTMY3 | Added option to obtain the black body sky temperature
from a parameter or an input signal rather than
computing it in the weather data reader. Removed redundant connection connect(conHorRad.HOut, cheHorRad.HIn); .
|
Buildings.Fluid | |
Buildings.Chillers.ElectricEIR Buildings.Chillers.ElectricReformulatedEIR |
Changed implementation so that the model is continuously differentiable. This is for issue 373. |
Buildings.Fluid.HeatExchangers.DryCoilCounterFlow | Changed assignment of T_m to avoid using the conditionally
enabled model ele[:].mas.T , which is only
valid in a connect statement.
Moved assignments of
Q1_flow , Q2_flow , T1 ,
T2 and T_m outside of equation section
to avoid mixing graphical and textual modeling within the same model.
|
Buildings.Fluid.HeatExchangers.DryCoilDiscretized | Removed parameter m1_flow_nominal , as this parameter is already
declared in its base class
Buildings.Fluid.Interfaces.PartialFourPortInterface .
This change avoids an error in OpenModelica as the two declarations
had a different value for the min attribute, which is not valid
in Modelica.
|
Buildings.Fluid.HeatExchangers.BaseClasses.CoilRegister Buildings.Fluid.HeatExchangers.BaseClasses.DuctManifoldDistributor |
Reformulated the multiple iterators in the sum function
as this language construct is not supported in OpenModelica.
|
Buildings.Fluid.HeatExchangers.RadiantSlabs.SingleCircuitSlab | Set start value for hPip(fluid(T)) to avoid
a warning about conflicting start values.
|
Buildings.Fluid.Movers.SpeedControlled_y Buildings.Fluid.Movers.SpeedControlled_Nrpm Buildings.Fluid.Movers.FlowControlled_dp Buildings.Fluid.Movers.FlowControlled_m_flow |
For the parameter setting use_powerCharacteristic=true ,
changed the computation of the power consumption at
reduced speed to properly account for the
affinity laws. This is in response to
#202.
|
Buildings.Fluid.SolarCollectors.ASHRAE93 Buildings.Fluid.SolarCollectors.EN12975 |
Reformulated the model to avoid a translation error
if glycol is used. Propagated parameters for initialization in base class Buildings.Fluid.SolarCollectors.BaseClasses.PartialSolarCollector
and set prescribedHeatFlowRate=true .
|
Buildings.Fluid.Storage.StratifiedEnhancedInternalHex | Replaced the abs() function in the assignment of the parameter
nSegHexTan as the return value of abs()
is a Real which causes a type error during model check.
|
Buildings.HeatTransfer | |
Buildings.HeatTransfer.Conduction.MultiLayer | Changed the assignment of _T_a_start ,
_T_b_start and RTot to be
in the initial equation section as opposed to
the parameter declaration.
This is needed to avoid an error during model check
and translation in Dymola 2015 FD01 beta1.
|
Buildings.HeatTransfer.Windows.InteriorHeatTransferConvective | Changed model to allow a temperature dependent convective heat transfer on the room side. This is for issue 52. |
Buildings.Media | |
Buildings.Media.Interfaces.PartialSimpleIdealGasMedium Buildings.Media.Interfaces.PartialSimpleMedium |
Set T(start=T_default) and
p(start=p_default) in the
ThermodynamicState record. Setting the start value for
T is required to avoid an error due to
conflicting start values when translating
Buildings.Examples.VAVReheat.ClosedLoop in pedantic mode.
|
Buildings.ThermalZones | |
Buildings.ThermalZones.Detailed.MixedAir | Changed model to allow a temperature dependent convective heat transfer on the room side for windows. This is for issue 52. |
Rooms.BaseClasses.ExteriorBoundaryConditionsWithWindow | Conditionally removed the shade model if no shade is present. This corrects #234. |
The following existing components have been improved in a non-backward compatible way:
Buildings.Airflow | |
Buildings.Airflow.Multizone.ZonalFlow_ACS Buildings.Airflow.Multizone.ZonalFlow_m_flow |
Removed parameter forceErrorControlOnFlow as it was not used.
For Dymola, the conversion script will automatically
update existing models.
|
Buildings.BoundaryConditions | |
Buildings.BoundaryConditions.WeatherData.ReaderTMY3 | Changed the following signals for compatibility with OpenModelica:weaBus.sol.zen to weaBus.solZen .weaBus.sol.dec to weaBus.solDec .weaBus.sol.alt to weaBus.solAlt .weaBus.sol.solHouAng to weaBus.solHouAng .For Dymola, the conversion script will automatically update existing models. |
Buildings.Examples | |
Buildings.Examples.VAVReheat.Controls.IntegerSum | Removed block as it is not used in any model.
Models that require an integer sum can use
Modelica.Blocks.MathInteger.Sum .
|
Buildings.Examples.VAVReheat.Controls.UnoccupiedOn | Removed block as it is not used in any model. |
Buildings.HeatTransfer | |
Buildings.HeatTransfer.Data.GlazingSystems.Generic | Removed parameter nLay as OpenModelica
could not assign it during translation.
For Dymola, the conversion script will automatically
update existing models.
|
Buildings.HeatTransfer.Conduction.BaseClasses.der_temperature_u | Changed the input argument for this function from type
Buildings.HeatTransfer.Data.BaseClasses.Material
to the elements of this type as OpenModelica fails to translate the
model if the input to this function is a record.
|
Buildings.HeatTransfer.Types.Azimuth Buildings.HeatTransfer.Types.Tilt |
Moved these types from Buildings.HeatTransfer
to the top-level package Buildings because
they are used in Buildings.BoundaryConditions ,
Buildings.HeatTransfer and Buildings.ThermalZones.Detailed .For Dymola, the conversion script will automatically update existing models. |
Buildings.Fluid | |
Buildings.Fluid.FixedResistances.Pipe Buildings.Fluid.FixedResistances.BaseClasses.Pipe Buildings.Fluid.HeatExchangers.RadiantSlabs.SingleCircuitSlab |
Renamed pressure drop from res to
preDro to use the same name as in other models.
This corrects
#271.
For Dymola, the conversion script will automatically
update existing models.
|
Buildings.Fluid.HeatExchangers.DryCoilDiscretized Buildings.Fluid.HeatExchangers.WetCoilDiscretized |
Reformulated flow splitter in the model to reduce
the dimension of the coupled linear or nonlinear
system of equations. With this revision, the optional
control volume in the duct inlet has been removed
as it is no longer needed. Therefore, the parameter
dl has also been removed.
Replaced the parameters energyDynamics1
and energyDynamics2 with
energyDynamics .
Removed the parameter ductConnectionDynamics .For Dymola, the conversion script will automatically update existing models. |
Buildings.Fluid.HeatExchangers.HeaterCoolerPrescribed | Renamed the model to HeaterCooler_u due to
the introduction of the new model HeaterCooler_T .For Dymola, the conversion script will automatically update existing models. |
Buildings.Fluid.HeatExchangers.RadiantSlabs.SingleCircuitSlab Buildings.Fluid.HeatExchangers.RadiantSlabs.ParallelCircuitsSlab |
Changed the models to use by default an ε-NTU
approach for the heat transfer between the fluid and the slab
rather than a finite difference scheme along the
flow path.
Optionally, the finite difference scheme can also be used
as this is needed for some control design applications. The new ε-NTU formulation has shown to lead to about five times faster computation on several test cases including the models in Buildings.ThermalZones.Detailed.FLEXLAB.Rooms.Examples .For Dymola, the conversion script will automatically update existing models. |
Buildings.Fluid.HeatExchangers.BaseClasses.DuctManifoldFixedResistance | Reformulated flow splitter in the model to reduce
the dimension of the coupled linear or nonlinear
system of equations. With this revision, the optional
control volume in the duct inlet has been removed
as it is no longer needed. Therefore, the parameters
dl and energyDynamics have
also been removed.For Dymola, the conversion script will automatically update existing models. |
Buildings.Fluid.HeatExchangers.BaseClasses.CoilRegister | Replaced the parameters energyDynamics1
and energyDynamics2 with
the new parameter energyDynamics .
Removed the parameters steadyState_1
and steadyState_2 as this information
is already contained in energyDynamics .For Dymola, the conversion script will automatically update existing models. |
Buildings.Fluid.MassExchangers.HumidifierPrescribed | Renamed the model to Humidifier_u due to
the introduction of the new model HeaterCooler_T
and to use the same naming pattern as HeaterCooler_u .For Dymola, the conversion script will automatically update existing models. |
Buildings.Fluid.Movers | This package has been redesigned.
The models have been renamed as follows:Buildings.Fluid.Movers.FlowMachine_dp
is now called
Buildings.Fluid.Movers.FlowControlled_dp .Buildings.Fluid.Movers.FlowMachine_m_flow
is now called
Buildings.Fluid.Movers.FlowControlled_m_flow .Buildings.Fluid.Movers.FlowMachine_Nrpm
is now called
Buildings.Fluid.Movers.SpeedControlled_Nrpm .Buildings.Fluid.Movers.FlowMachine_y
is now called
Buildings.Fluid.Movers.SpeedControlled_y .In addition, the performance data of all movers are now stored in a record. These records are in Buildings.Fluid.Movers.Data .
For most existing instances, it should be sufficient to enclose
the existing performance data in a record called per .
For example,
becomes
See the Buildings.Fluid.Movers.UsersGuide for more
information about these records.
For Dymola, the conversion script will update existing models to use the old implementations which are now in the package Buildings.Obsolete.Fluid.Movers .
|
Buildings.Media | |
Buildings.Media |
Renamed all media to simplify the media selection.
For typical building energy simulation,
Buildings.Media.Air and Buildings.Media.Water
should be used.The following changes were made. Renamed Buildings.Media.GasesPTDecoupled.MoistAirUnsaturated to Buildings.Media.Air .Renamed Buildings.Media.ConstantPropertyLiquidWater to Buildings.Media.Water .Renamed Buildings.Media.PerfectGases.MoistAir to Buildings.Obsolete.Media.PerfectGases.MoistAir .Renamed Buildings.Media.GasesConstantDensity.MoistAirUnsaturated to Buildings.Obsolete.Media.GasesConstantDensity.MoistAirUnsaturated .Renamed Buildings.Media.GasesConstantDensity.MoistAir to Buildings.Obsolete.Media.GasesConstantDensity.MoistAir .Renamed Buildings.Media.GasesConstantDensity.SimpleAir to Buildings.Obsolete.Media.GasesConstantDensity.SimpleAir .Renamed Buildings.Media.IdealGases.SimpleAir to Buildings.Obsolete.Media.IdealGases.SimpleAir .Renamed Buildings.Media.GasesPTDecoupled.MoistAir to Buildings.Obsolete.Media.GasesPTDecoupled.MoistAir .Renamed Buildings.Media.GasesPTDecoupled.SimpleAir to Buildings.Obsolete.Media.GasesPTDecoupled.SimpleAir .For Dymola, the conversion script will update existing models according to the above list. |
Buildings.Media.Water | Removed option to model water as a compressible medium as this option was not useful. |
Buildings.ThermalZones | |
Buildings.ThermalZones.Detailed.BaseClasses.ParameterConstructionWithWindow | Removed the keyword replaceable for the parameters
ove and sidFin .Models that instantiate Buildings.ThermalZones.Detailed.MixedAir are
not affected by this change.
|
Buildings.ThermalZones.Detailed.Examples.BESTEST | Moved the package to Buildings.ThermalZones.Detailed.Validation.BESTEST .
|
Buildings.Utilities | |
Buildings.Utilities.SimulationTime | Moved the block Buildings.Utilities.SimulationTime
to Buildings.Utilities.Time.ModelTime .For Dymola, the conversion script will update existing models according to the above list. |
The following critical errors have been fixed (i.e., errors that can lead to wrong simulation results):
Buildings.BoundaryConditions | |
Buildings.BoundaryConditions.WeatherData.ReaderTMY3 | Corrected error that led the total and opaque sky cover to be ten times too low if its value was obtained from the parameter or the input connector. For the standard configuration in which the sky cover is obtained from the weather data file, the model was correct. This error only affected the other two possible configurations. |
Buildings.Fluid | |
Buildings.Fluid.Data.Pipes | Corrected wrong entries for inner and outer diameter of PEX pipes. |
Buildings.Fluid.Geothermal.Boreholes.BaseClasses.singleUTubeResistances | Corrected error in function that used beta
before it was assigned a value.
|
Buildings.Fluid.Storage.Stratified Buildings.Fluid.Storage.StratifiedEnhanced Buildings.Fluid.Storage.StratifiedEnhancedInternalHex |
Replaced the use of Medium.lambda_const with
Medium.thermalConductivity(sta_default) as
lambda_const is not declared for all media.
This avoids a translation error if certain media are used.
|
Buildings.Fluid.Storage.StratifiedEnhancedInternalHex | Corrected issue #271 which led to a compilation error if the heat exchanger and the tank had different media. |
Buildings.HeatTransfer | |
Buildings.HeatTransfer.Windows.BaseClasses.GlassLayer | Corrected issue #304 that led to an error in the glass temperatures if the glass conductance is very small. |
Buildings.ThermalZones | |
Buildings.ThermalZones.Detailed.MixedAir | Added propagation of the parameter value linearizeRadiation
to the window model. Prior to this change, the radiation
was never linearized for computing the glass long-wave radiation.
|
Buildings.ThermalZones.Detailed.FLEXLAB.Rooms.Examples.X3WithRadiantFloor Buildings.ThermalZones.Detailed.FLEXLAB.Rooms.Examples.X3AWithRadiantFloor Buildings.ThermalZones.Detailed.FLEXLAB.Rooms.Examples.X3BWithRadiantFloor |
Corrected wrong entries for inner and outer diameter of PEX pipes. |
The following uncritical errors have been fixed (i.e., errors that do not lead to wrong simulation results, e.g., units are wrong or errors in documentation):
Buildings.Fluid | |
Buildings.Fluid.FixedResistances.FixedResistanceDpM | Corrected error in documentation of computation of k .
|
Buildings.HeatTransfer | |
Buildings.HeatTransfer.Windows.BaseClasses.GlassLayer | Changed type of tauIR from
Modelica.Units.SI.Emissivity to
Modelica.Units.SI.TransmissionCoefficient .
This avoids a type error in OpenModelica.
|
Note:
With version 2.0, we start using semantic versioning as described at http://semver.org/.
Extends from Modelica.Icons.ReleaseNotes (Icon for release notes in documentation).
Modelica definition
Buildings.UsersGuide.ReleaseNotes.Version_1_6_build1
Version 1.6 build 1
Information
Version 1.6 build 1 updates the Buildings
library to the
Modelica Standard Library 3.2.1 and to Modelica_StateGraph2
2.0.2.
This is the first version of the Buildings
library
that contains models from the
IEA EBC Annex 60 library,
a Modelica library for building and community energy systems that is
collaboratively developed within the project
"New generation computational tools for building and community energy systems
based on the Modelica and Functional Mockup Interface standards",
a project that is conducted under the
Energy in Buildings and Communities Programme (EBC) of the
International Energy Agency (IEA).
The following new components have been added to existing libraries:
Buildings.Fluid | |
Buildings.Fluid.Actuators.Valves.TwoWayTable | Two way valve for which the opening characteristics is specified by a table. |
Buildings.Utilities.Math | |
Buildings.Utilities.Math.Examples.Average Buildings.Utilities.Math.Examples.InverseXRegularized Buildings.Utilities.Math.Examples.Polynominal Buildings.Utilities.Math.Examples.PowerLinearized Buildings.Utilities.Math.Examples.QuadraticLinear Buildings.Utilities.Math.Examples.RegNonZeroPower Buildings.Utilities.Math.Examples.SmoothExponential Buildings.Utilities.Math.Functions.average Buildings.Utilities.Math.Functions.booleanReplicator Buildings.Utilities.Math.Functions.Examples.IsMonotonic Buildings.Utilities.Math.Functions.Examples.TrapezoidalIntegration Buildings.Utilities.Math.Functions.integerReplicator Buildings.Utilities.Math.InverseXRegularized Buildings.Utilities.Math.Polynominal Buildings.Utilities.Math.PowerLinearized Buildings.Utilities.Math.QuadraticLinear Buildings.Utilities.Math.RegNonZeroPower Buildings.Utilities.Math.SmoothExponential Buildings.Utilities.Math.TrapezoidalIntegration | Various functions and blocks for mathematical operations. |
Buildings.Utilities.Psychrometrics | |
Buildings.Utilities.Psychrometrics.Examples.SaturationPressureLiquid Buildings.Utilities.Psychrometrics.Examples.SaturationPressure Buildings.Utilities.Psychrometrics.Examples.SublimationPressureIce Buildings.Utilities.Psychrometrics.Functions.BaseClasses.der_saturationPressureLiquid Buildings.Utilities.Psychrometrics.Functions.BaseClasses.der_sublimationPressureIce Buildings.Utilities.Psychrometrics.Functions.BaseClasses.Examples.SaturationPressureDerivativeCheck Buildings.Utilities.Psychrometrics.Functions.Examples.SaturationPressure Buildings.Utilities.Psychrometrics.Functions.saturationPressureLiquid Buildings.Utilities.Psychrometrics.Functions.saturationPressure Buildings.Utilities.Psychrometrics.Functions.sublimationPressureIce Buildings.Utilities.Psychrometrics.SaturationPressureLiquid Buildings.Utilities.Psychrometrics.SaturationPressure Buildings.Utilities.Psychrometrics.SublimationPressureIce | Various functions and blocks for psychrometric calculations. |
The following existing components have been improved in a backward compatible way:
Buildings.Fluid | |
Buildings.Fluid.Interfaces.PartialTwoPortInterface Buildings.Fluid.Interfaces.PartialFourPortInterface |
Removed call to homotopy function in the computation of the connector variables as these are conditionally enabled variables and therefore must not be used in any equation. They are only for output reporting. |
Buildings.Fluid.Actuators.Dampers.Exponential | Improved documentation of the flow resistance. |
Buildings.BoundaryConditions | |
Buildings.BoundaryConditions.WeatherData.ReaderTMY3 |
Added the option to use a constant, an input signal or the weather file as the source
for the ceiling height, the total sky cover, the opaque sky cover, the dew point temperature,
and the infrared horizontal radiation HInfHor .
|
The following existing components have been improved in a non-backward compatible way:
Buildings.Fluid | |
Buildings.Fluid.Movers.FlowMachinePolynomial | Moved the model to the package
Buildings.Obsolete ,
as this model is planned to be removed in future versions.
The conversion script should update old instances of
this model automatically in Dymola.
Users should change their models to use a flow machine from
the package Buildings.Fluid.Movers .
|
Buildings.Fluid.Storage.ExpansionVessel | Simplified the model to have a constant pressure.
The following non-backward compatible changes
have been made.
|
Buildings.Fluid.Storage.StratifiedEnhancedInternalHex | Revised the model as the old version required the porta
of the heat exchanger to be located higher than portb.
This makes sense if the heat exchanger is used to heat up the tank,
but not if it is used to cool down a tank, such as in a cooling plant.
The following parameters were changed:
|
The following critical errors have been fixed (i.e., errors that can lead to wrong simulation results):
Buildings.Fluid | |
Buildings.Fluid.Geothermal.Boreholes.UTube | Reimplemented the resistor network inside the borehole
as the old implementation led to too slow a transient
response. This change also led to the removal of the
parameters B0 and B1
as the new implementation does not require them.
|
The following uncritical errors have been fixed (i.e., errors that do not lead to wrong simulation results, e.g., units are wrong or errors in documentation):
Buildings.Fluid | |
Buildings.Fluid.Geothermal.Boreholes.BaseClasses.HexInternalElement | Corrected error in documentation which stated a wrong default value for the pipe spacing. |
Buildings.Fluid.HeatExchangers.BaseClasses.ntu_epsilonZ() | Added dummy argument to function call of Internal.solve
to avoid a warning during model check in Dymola 2015.
|
Buildings.Fluid.HeatExchangers.DryEffectivenessNTU | Changed assert statement to avoid comparing
enumeration with an integer, which triggers a warning
in Dymola 2015.
|
Buildings.ThermalZones.Detailed.Constructions.Examples.ExteriorWall Buildings.ThermalZones.Detailed.Constructions.Examples.ExteriorWallWithWindow Buildings.ThermalZones.Detailed.Constructions.Examples.ExteriorWallTwoWindows |
Corrected wrong assignment of parameter in instance bouConExt(conMod=...)
which was set to an interior instead of an exterior convection model.
|
Buildings.Utilities.Psychrometrics.Functions.TDewPoi_pW() | Added dummy argument to function call of Internal.solve
to avoid a warning during model check in Dymola 2015.
|
The followings issues have been fixed:
Buildings.Fluid | |
#196 | Change capacity location in borehole grout. |
Extends from Modelica.Icons.ReleaseNotes (Icon for release notes in documentation).
Modelica definition
Buildings.UsersGuide.ReleaseNotes.Version_1_5_build3
Version 1.5 build 3
Information
Version 1.5 build 3 is a maintenance release that corrects an error in
Buildings.Fluid.MassExchangers.HumidifierPrescribed
.
It is fully compatible with version 1.5 build 2.
The following critical errors have been fixed (i.e., errors that can lead to wrong simulation results):
Buildings.Fluid | |
Buildings.Fluid.MassExchangers.HumidifierPrescribed | Corrected the enthalpy balance, which caused the latent heat flow rate to be added twice to the fluid stream. This closes issue #197. |
The following issues have been fixed:
HumidifierPrescribed accounts twice for latent heat gain | |
#197 | This issue has been addressed by correcting the latent heat added to the fluid stream. |
Extends from Modelica.Icons.ReleaseNotes (Icon for release notes in documentation).
Modelica definition
Buildings.UsersGuide.ReleaseNotes.Version_1_5_build2
Version 1.5 build 2
Information
Version 1.5 build 2 is a maintenance release that corrects an error in
Buildings.Fluid.HeatExchangers.DryCoilDiscretized
and in
Buildings.Fluid.HeatExchangers.WetCoilDiscretized
.
It is fully compatible with version 1.5 build 1.
The following critical errors have been fixed (i.e., errors that can lead to wrong simulation results):
Buildings.Fluid | |
Buildings.Fluid.HeatExchangers.DryCoilDiscretized Buildings.Fluid.HeatExchangers.WetCoilDiscretized |
Corrected wrong connect statements that caused the last register to have no liquid flow. This closes issue #194. |
The following issues have been fixed:
DryCoilDiscretized model not using last register, liquid flow path | |
#194 | This issue has been addressed by correcting the connect statements. |
Extends from Modelica.Icons.ReleaseNotes (Icon for release notes in documentation).
Modelica definition
Buildings.UsersGuide.ReleaseNotes.Version_1_5_build1
Version 1.5 build 1
Information
Version 1.5 build 1 is a major release that contains new packages with models for solar collectors and for the Facility for Low Energy Experiments (FLEXLAB) at the Lawrence Berkeley National Laboratory.
This release also contains a major revision of all info sections to correct invalid html syntax.
The package Buildings.HeatTransfer.Radiosity
has been revised to comply
with the Modelica language specification.
The package Buildings.ThermalZones.Detailed
has been revised to aid implementation of
non-uniformly mixed room air models.
This release also contains various corrections that avoid warnings during translation
when used with Modelica 3.2.1.
Various models have been revised to increase compatibility with OpenModelica.
However, currently only a subset of the models work with OpenModelica.
The following new libraries have been added:
Buildings.Fluid.SolarCollectors | Library with solar collectors. |
Buildings.ThermalZones.Detailed.FLEXLAB | Package with models for test cells of LBNL's FLEXLAB (Facility for Low Energy Experiments in Buildings). |
Buildings.Utilities.IO.FLEXLAB | Package that demonstrates two-way data exchange between Modelica and LBNL's FLEXLAB (Facility for Low Energy Experiments in Buildings). |
The following new components have been added to existing libraries:
Buildings.Fluid.Storage | |
Buildings.Fluid.Storage.StratifiedEnhancedInternalHex | Added a model of a tank with built-in heat exchanger. This model may be used together with solar thermal plants. |
Buildings.Resources | |
Buildings.Resources.Include | Added an Include folder and the bcvtb.h
header file to it to fix compilation errors in BCVTB example files.
|
The following existing components have been improved in a backward compatible way:
Buildings.BoundaryConditions | |
Buildings.BoundaryConditions.WeatherData.ReaderTMY3 Buildings.BoundaryConditions.WeatherData.BaseClasses.getAbsolutePath |
Improved the algorithm that determines the absolute path of the file.
Now weather files are searched in the path specified, and if not found, the urls
file:// , modelica:// and modelica://Buildings
are added in this order to search for the weather file.
This allows using the data reader without having to specify an absolute path,
as long as the Buildings library
is on the MODELICAPATH .
|
Buildings.Fluid | |
Buildings.Fluid.Interfaces.StaticTwoPortConservationEquation | Reformulated computation of outlet properties to avoid an event at zero mass flow rate. |
Buildings.Fluid.HeatExchangers.CoolingTowers.YorkCalc | Simplified the implementation for the situation if
allowReverseFlow=false .
Avoided the use of the conditionally enabled variables sta_a and
sta_b as this was not proper use of the Modelica syntax.
|
Buildings.Fluid.Interfaces.Examples.ReverseFlowHumidifier | Changed one instance of Modelica.Fluid.Sources.MassFlowSource_T ,
that was connected to the two fluid streams,
to two instances, each having half the mass flow rate.
This is required for the model to work with Modelica 3.2.1 due to the
change introduced in
ticket #739.
|
Buildings.Fluid.Sensors.EnthalpyFlowRate Buildings.Fluid.Sensors.SensibleEnthalpyFlowRate Buildings.Fluid.Sensors.LatentEnthalpyFlowRate Buildings.Fluid.Sensors.VolumeFlowRate |
Removed default value tau=0 as the base class
already sets tau=1 .
This change was made so that all sensors use the same default value.
|
Buildings.Fluid.Sensors.TraceSubstancesTwoPort | Added default value C_start=0 .
|
Buildings.HeatTransfer | |
Buildings.HeatTransfer.Data.OpaqueConstructions.Generic | Changed the annotation of the
instance material from
Evaluate=true to Evaluate=false .
This is required to allow changing the
material properties after compilation.
Note, however, that the number of state variables in
Buildings.HeatTransfer.Data.BaseClasses.Material
are only computed when the model is translated, because
the number of state variables is fixed
at compilation time.
|
Buildings.Utilities | |
Buildings.Utilities.Diagnostics.AssertEquality Buildings.Utilities.Diagnostics.AssertInequality |
Added time in print statement as OpenModelica,
in its error message, does not output the time
when the assert is triggered.
|
The following existing components have been improved in a non-backward compatible way:
Buildings.Airflow | |
Buildings.Airflow.Multizone.Orifice Buildings.Airflow.Multizone.EffectiveAirLeakageArea Buildings.Airflow.Multizone.ZonalFlow_ACS |
Changed the parameter useConstantDensity to
useDefaultProperties to use consistent names
within this package.
A conversion script in Resources/Scripts/Dymola
can be used to update old models that use this parameter.
|
Buildings.Fluid | |
Buildings.Fluid.BaseClasses.IndexWater | Renamed class to
Buildings.Fluid.BaseClasses.IndexMassFraction
as it is applicable for all mass fraction sensors.
|
Buildings.Fluid.HeatExchangers.ConstantEffectiveness Buildings.Fluid.HeatExchangers.DryEffectivenessNTU Buildings.Fluid.Interfaces.ConservationEquation Buildings.Fluid.Interfaces.StaticFourPortHeatMassExchanger Buildings.Fluid.Interfaces.StaticTwoPortConservationEquation Buildings.Fluid.Interfaces.StaticTwoPortHeatMassExchanger Buildings.Fluid.MassExchangers.ConstantEffectiveness Buildings.Fluid.MassExchangers.HumidifierPrescribed Buildings.Fluid.MixingVolumes.BaseClasses.PartialMixingVolumeWaterPort Buildings.Fluid.MixingVolumes.MixingVolume Buildings.Fluid.MixingVolumes.MixingVolumeDryAir Buildings.Fluid.MixingVolumes.MixingVolumeMoistAir Buildings.Fluid.Storage.ExpansionVessel |
Changed the input connector mXi_flow (or mXi1_flow
and mXi2_flow ) to mWat_flow (or mWat1_flow
and mWat2_flow ).
This change has been done as declaring mXi_flow is ambiguous
because it does not specify what other species are added unless a mass flow rate
m_flow is also known. To avoid this confusion, the connector variables
have been renamed.
The equations that were used were, however, correct.
This addresses issue #165.
|
Buildings.Fluid.Storage.BaseClasses.IndirectTankHeatExchanger Buildings.Fluid.BaseClasses.PartialResistance Buildings.Fluid.FixedResistances.BaseClasses.Pipe Buildings.Fluid.FixedResistances.FixedResistanceDpM Buildings.Fluid.FixedResistances.LosslessPipe Buildings.Fluid.Geothermal.Boreholes.BaseClasses.BoreholeSegment Buildings.Fluid.Geothermal.Boreholes.UTube Buildings.Fluid.HeatExchangers.RadiantSlabs.ParallelCircuitsSlab Buildings.Fluid.Interfaces.FourPortHeatMassExchanger Buildings.Fluid.Interfaces.PartialFourPortInterface Buildings.Fluid.Interfaces.PartialTwoPortInterface Buildings.Fluid.Interfaces.StaticFourPortHeatMassExchanger Buildings.Fluid.Interfaces.StaticTwoPortHeatMassExchanger Buildings.Fluid.Interfaces.TwoPortHeatMassExchanger Buildings.Fluid.MixingVolumes.BaseClasses.PartialMixingVolume Buildings.Fluid.Movers.BaseClasses.FlowControlled Buildings.Fluid.Movers.BaseClasses.IdealSource Buildings.Fluid.Movers.BaseClasses.PrescribedFlowMachine |
Removed the computation of V_flow and removed the parameter
show_V_flow .
The reason is that the computation of V_flow required
the use of sta_a (to compute the density),
but sta_a is also a variable that is conditionally
enabled. However, this was not correct Modelica syntax as conditional variables
can only be used in a connect
statement, not in an assignment. Dymola 2014 FD01 beta3 is checking
for this incorrect syntax. Hence, V_flow was removed as its
conditional implementation would require a rather cumbersome implementation
that uses a new connector that carries the state of the medium.
|
Buildings.Fluid.MixingVolumes | Removed Buildings.Fluid.MixingVolumes.MixingVolumeDryAir
as this model is no longer used. The model
Buildings.Fluid.MixingVolumes.MixingVolume
can be used instead of.Removed base class Buildings.Fluid.MixingVolumes.BaseClasses.PartialMixingVolumeWaterPort
as this model is no longer used.
|
Buildings.Fluid.Sensors.Examples.TraceSubstances | Renamed example from ExtraProperty to
TraceSubstances in order to use the same name
as the sensor.
|
Buildings.Fluid.Sources.PrescribedExtraPropertyFlowRate | Renamed model toTraceSubstancesFlowRate to
use the same terminology than the Modelica Standard Library.The conversion script updates existing models that instantiate this model. |
Buildings.Fluid.Sources.Examples.PrescribedExtraPropertyFlow | Renamed example toTraceSubstancesFlowRate
in order to use the same name as the source model.
|
Buildings.Fluid.MixingVolumes.BaseClasses.PartialMixingVolume Buildings.Fluid.FixedResistances.Pipe Buildings.Fluid.HeatExchangers.RadiantSlabs.ParallelCircuitsSlab Buildings.Fluid.HeatExchangers.RadiantSlabs.SingleCircuitSlab Buildings.Fluid.Movers.BaseClasses.FlowControlled |
Renamed X_nominal to X_default
or X_start , where X may be
state , rho , or mu ,
depending on whether the medium default values or the start values
are used in the computation of the state
and derived quantities.
|
Buildings.HeatTransfer Buildings.ThermalZones |
|
Buildings.HeatTransfer.Interfaces.RadiosityInflow Buildings.HeatTransfer.Interfaces.RadiosityOutflow Buildings.HeatTransfer.Radiosity.BaseClasses.ParametersTwoSurfaces Buildings.HeatTransfer.Radiosity.Constant Buildings.HeatTransfer.Radiosity.Examples.OpaqueSurface Buildings.HeatTransfer.Radiosity.Examples.OutdoorRadiosity Buildings.HeatTransfer.Radiosity.IndoorRadiosity Buildings.HeatTransfer.Radiosity.OpaqueSurface Buildings.HeatTransfer.Radiosity.OutdoorRadiosity Buildings.HeatTransfer.Radiosity.RadiositySplitter Buildings.HeatTransfer.Radiosity.package Buildings.HeatTransfer.Windows.BaseClasses.Examples.CenterOfGlass Buildings.HeatTransfer.Windows.BaseClasses.Examples.GlassLayer Buildings.HeatTransfer.Windows.BaseClasses.Examples.Shade Buildings.HeatTransfer.Windows.BaseClasses.GlassLayer Buildings.HeatTransfer.Windows.BaseClasses.Shade Buildings.HeatTransfer.Windows.Examples.BoundaryHeatTransfer Buildings.HeatTransfer.Windows.ExteriorHeatTransfer Buildings.HeatTransfer.Windows.InteriorHeatTransfer Buildings.ThermalZones.Detailed.BaseClasses.InfraredRadiationExchange Buildings.ThermalZones.Detailed.BaseClasses.InfraredRadiationGainDistribution Buildings.ThermalZones.Detailed.BaseClasses.MixedAir Buildings.ThermalZones.Detailed.BaseClasses.Overhang Buildings.ThermalZones.Detailed.BaseClasses.SideFins |
Changed the connectors for the radiosity model.
The previous implemenation declared the radiosity as a
flow variables, but the implementation did not use
a potential variable.Therefore, the radiosity was the only variable in the connector, which is not allowed for flow variables.
This change required a reformulation of models because with the new formulation,
the incoming and outcoming radiosity are both non-negative values.
This addresses issue #158.
|
Buildings.HeatTransfer Buildings.ThermalZones |
|
Buildings.HeatTransfer.Windows.BaseClasses.PartialConvection Buildings.HeatTransfer.Windows.BaseClasses.PartialWindowBoundaryCondition Buildings.HeatTransfer.Windows.BaseClasses.Shade Buildings.HeatTransfer.Windows.BaseClasses.ShadeConvection Buildings.HeatTransfer.Windows.BaseClasses.ShadeRadiation Buildings.HeatTransfer.Windows.InteriorHeatTransfer Buildings.HeatTransfer.Windows.InteriorHeatTransferConvective Buildings.ThermalZones.Detailed.ExteriorBoundaryConditionsWithWindow Buildings.ThermalZones.Detailed.PartialSurfaceInterface Buildings.ThermalZones.Detailed.InfraredRadiationExchange Buildings.ThermalZones.Detailed.AirHeatMassBalanceMixed Buildings.ThermalZones.Detailed.SolarRadiationExchange Buildings.ThermalZones.Detailed.RadiationTemperature Buildings.ThermalZones.Detailed.InfraredRadiationGainDistribution |
Redesigned the implementation of the room model and its base classes. This redesign separates convection from radiation, and it provides one composite model for the convection and the heat and mass balance in the room. This change was done to allow an implementation of the room air heat and mass balance that does not assume uniformly mixed room air. |
Buildings.HeatTransfer | |
Buildings.HeatTransfer.Convection.Functions.HeatFlux.rayleigh | Renamed function from raleigh to rayleigh .
|
The following critical errors have been fixed (i.e., errors that can lead to wrong simulation results):
Buildings.Fluid | |
Buildings.Fluid.Sensors.SpecificEntropyTwoPort | Corrected wrong computation of the dynamics used for the sensor signal. |
Buildings.HeatTransfer | |
Buildings.HeatTransfer.Data.GlazingSystems.DoubleClearAir13Clear | Corrected the glass layer thickness, which was 5.7 mm instead of 3 mm, as the documentation states. |
The following uncritical errors have been fixed (i.e., errors that do not lead to wrong simulation results, e.g., units are wrong or errors in documentation):
Buildings | |
Buildings.BoundaryConditions.SkyTemperature.BlackBody Buildings.BoundaryConditions.WeatherData.BaseClasses.CheckTemperature Buildings.BoundaryConditions.WeatherData.ReaderTMY3 Buildings.Controls.SetPoints.HotWaterTemperatureReset Buildings.Examples.ChillerPlant.BaseClasses.Controls.ChillerSwitch Buildings.Examples.ChillerPlant.BaseClasses.Controls.WSEControl Buildings.Fluid.Boilers.BoilerPolynomial Buildings.Fluid.HeatExchangers.BaseClasses.HexElement Buildings.Fluid.HeatExchangers.BaseClasses.MassExchange Buildings.Fluid.HeatExchangers.BaseClasses.MassExchangeDummy Buildings.Fluid.HeatExchangers.DXCoils.BaseClasses.ApparatusDewPoint Buildings.Fluid.HeatExchangers.DXCoils.BaseClasses.ApparatusDryPoint Buildings.Fluid.HeatExchangers.DXCoils.BaseClasses.CoolingCapacity Buildings.Fluid.HeatExchangers.DXCoils.BaseClasses.DXCooling Buildings.Fluid.HeatExchangers.DXCoils.BaseClasses.DryCoil Buildings.Fluid.HeatExchangers.DXCoils.BaseClasses.DryWetSelector Buildings.Fluid.HeatExchangers.DXCoils.BaseClasses.Evaporation Buildings.Fluid.HeatExchangers.DXCoils.BaseClasses.WetCoil Buildings.Fluid.MixingVolumes.BaseClasses.PartialMixingVolumeWaterPort Buildings.Fluid.Sensors.RelativeTemperature Buildings.Fluid.Sensors.Temperature Buildings.Fluid.Sensors.TemperatureTwoPort Buildings.Fluid.Sensors.TemperatureWetBulbTwoPort Buildings.Fluid.SolarCollectors.BaseClasses.PartialHeatLoss Buildings.Utilities.Comfort.Fanger Buildings.Utilities.IO.BCVTB.From_degC Buildings.Utilities.IO.BCVTB.To_degC Buildings.Utilities.Psychrometrics.TDewPoi_pW Buildings.Utilities.Psychrometrics.TWetBul_TDryBulPhi Buildings.Utilities.Psychrometrics.TWetBul_TDryBulXi Buildings.Utilities.Psychrometrics.WetBul_pTX Buildings.Utilities.Psychrometrics.pW_TDewPoi |
Replaced wrong attribute quantity="Temperature"
with quantity="ThermodynamicTemperature" .
|
Buildings.Fluid | |
Buildings.Fluid.Data.Fuels.Generic | Corrected wrong type for mCO2 .
It was declared as Modelica.Units.SI.MassFraction ,
which is incorrect.
|
Buildings.Fluid.HeatExchangers.CoolingTowers.Correlations.BaseClasses.Bounds | Corrected wrong type for FRWat_min , FRWat_max
and liqGasRat_max .
They were declared as Modelica.Units.SI.MassFraction ,
which is incorrect as, for example, FRWat_max can be larger than one.
|
Buildings.Fluid.HeatExchangers.ConstantEffectiveness Buildings.Fluid.MassExchangers.ConstantEffectiveness |
Corrected error in the documentation that was not updated when the implementation of zero flow rate was revised. |
Buildings.Fluid.Interfaces.ConservationEquation | Corrected the syntax error
Medium.ExtraProperty C[Medium.nC](each nominal=C_nominal)
to
Medium.ExtraProperty C[Medium.nC](nominal=C_nominal)
because C_nominal is a vector.
This syntax error caused a compilation error in OpenModelica.
|
Buildings.Fluid.Sensors.SensibleEnthalpyFlowRate Buildings.Fluid.Sensors.LatentEnthalpyFlowRate Buildings.Fluid.Sensors.MassFraction Buildings.Fluid.Sensors.MassFractionTwoPort |
Changed medium declaration in the extends statement
to replaceable to avoid a translation error in
OpenModelica.
|
Buildings.Fluid.Sensors.TraceSubstances Buildings.Fluid.Sensors.TraceSubstancesTwoPort |
Corrected syntax errors in setting nominal value for output signal and for state variable. This eliminates a compilation error in OpenModelica. |
Buildings.Fluid.Sources.TraceSubstancesFlowSource | Added missing each in declaration of
C_in_internal .
This eliminates a compilation error in OpenModelica.
|
Buildings.Utilities.Python27 | |
Buildings.Utilities.IO.Python27.Functions.exchange | Corrected error in C code that lead to message
'module' object has no attribute 'argv'
when a python module accessed sys.argv .
|
The following issues have been fixed:
Verify mass and species balance | |
#165 | This issue has been addressed by renaming the connectors to avoid an ambiguity in the model equation. The equations were correct. |
Remove flow attribute from radiosity connectors | |
#158 | This issue has been addressed by reformulating the radiosity models. With the new implementation, incoming and outgoing radiosity are non-negative quantities. |
Extends from Modelica.Icons.ReleaseNotes (Icon for release notes in documentation).
Modelica definition
Buildings.UsersGuide.ReleaseNotes.Version_1_4_build1
Version 1.4 build 1
Information
Version 1.4 build 1 contains the new package Buildings.Utilities.IO.Python27
that allows calling Python functions from Modelica.
It also contains in the package Buildings.HeatTransfer.Conduction.SingleLayer
a new model for heat conduction in phase change material. This model can be used as a layer
of the room heat transfer model.
Non-backward compatible changes had to be introduced
in the valve models
Buildings.Fluid.Actuators.Valves
to fully comply with the Modelica
language specification, and in the models in the package
Buildings.Utilities.Diagnostics
as they used the cardinality
function which is deprecated in the Modelica
Language Specification.
See below for details.
The following new libraries have been added:
Buildings.Utilities.IO.Python27 | Package that contains blocks and functions that embed Python 2.7 in Modelica. Data can be sent to Python functions and received from Python functions. This allows for example data analysis in Python as part of a Modelica model, or data exchange as part of a hardware-in-the-loop simulation in which Python is used to communicate with hardware. |
The following new components have been added to existing libraries:
Buildings.BoundaryConditions.WeatherData | |
Buildings.BoundaryConditions.WeatherData.BaseClasses.getAbsolutePath | This function is used by the weather data reader to set the path to the weather file relative to the root directory of the Buildings library. |
The following existing components have been improved in a backward compatible way:
Buildings.Fluid | |
Buildings.Fluid.MixingVolumes.BaseClasses.PartialMixingVolume | Removed the check of multiple connections to the same element
of a fluid port, as this check required the use of the deprecated
cardinality function.
|
Buildings.HeatTransfer | |
Buildings.HeatTransfer.Conduction.SingleLayer | Added option to model layers with phase change material. |
Buildings.ThermalZones | |
Buildings.ThermalZones.Detailed.BaseClasses.InfraredRadiationExchange | Removed the use of the cardinality function
as this function is deprecated in the Modelica Language Specification.
|
The following existing components have been improved in a non-backward compatible way:
Buildings.Fluid | |
Buildings.Fluid.Actuators.Valves | All valves now require the declaration of dp_nominal
if the parameter assignment is
CvData = Buildings.Fluid.Types.CvTypes.OpPoint .
This change was needed because in the previous version,
dp_nominal had
a default value of 6000 Pascals. However, if
CvData >< Buildings.Fluid.Types.CvTypes.OpPoint , then
dp_nominal is computed in the initial algorithm section and hence
providing a default value is not allowed according to
the Modelica Language Specification.
Hence, it had to be removed.As part of this change, we set dp(nominal=6000) for all valves,
because the earlier formulation uses a value that is not known during compilation,
and hence leads to an error in Dymola 2014.
|
Buildings.Fluid.MixingVolumes.MixingVolumeDryAir Buildings.Fluid.MixingVolumes.MixingVolumeMoistAir |
Removed the use of the deprecated
cardinality function.
Therefore, now all input signals must be connected.
|
Buildings.Utilities | |
Buildings.Utilities.Diagnostics.AssertEquality Buildings.Utilities.Diagnostics.AssertInequality |
Removed the option to not connect input signals, as this
required the use of the cardinality function which
is deprecated in the MSL, and not correctly implemented in OpenModelica.
Therefore, if using these models, both input signals must be connected.
|
Buildings.Utilities.Math.Functions.splineDerivatives | Removed the default value
input Boolean ensureMonotonicity=isMonotonic(y, strict=false)
as the Modelica language specification is not clear whether defaults can be computed
or must be constants.
|
The following critical errors have been fixed (i.e., errors that can lead to wrong simulation results):
Buildings.Controls | |
Buildings.Controls.SetPoints.HotWaterTemperatureReset | Corrected error that led to wrong results if the room air temperature is
different from its nominal value TRoo_nominal .
This fixes issue 74.
|
Buildings.HeatTransfer | |
Buildings.Fluid.HeatExchangers.RadiantSlabs.SingleCircuitSlab Buildings.Fluid.HeatExchangers.RadiantSlabs.ParallelCircuitSlab |
Fixed bug in the assignment of the fictitious thermal resistance by replacing
RFic[nSeg](each G=A/Rx) with
RFic[nSeg](each G=A/nSeg/Rx) .
This fixes issue 79.
|
Buildings.Utilities | |
Buildings.Utilities.Diagnostics.AssertEquality Buildings.Utilities.Diagnostics.AssertInequality |
Replaced when test with if test as
equations within a when section are only evaluated
when the condition becomes true.
This fixes issue 72.
|
The following uncritical errors have been fixed (i.e., errors that do not lead to wrong simulation results, e.g., units are wrong or errors in documentation):
Buildings.Fluid | |
Buildings.Fluid.Actuators.Valves.ThreeWayEqualPercentageLinear Buildings.Fluid.Actuators.Valves.ThreeWayLinear |
The documenation was
Fraction Kv(port_1 → port_2)/Kv(port_3 → port_2) instead of
Fraction Kv(port_3 → port_2)/Kv(port_1 → port_2).
Because the parameter set correctly its attributes
min=0 and max=1 ,
instances of these models used the correct value.
|
Buildings.Fluid.Actuators.BaseClasses.ValveParameters | Removed stray backslash in write statement. |
Buildings.Fluid.Interfaces.ConservationEquation Buildings.Fluid.Interfaces.StaticTwoPortConservationEquation Buildings.Fluid.Interfaces.StaticTwoPortHeatMassExchanger |
Removed wrong unit attribute of COut .
|
Buildings.Fluid.HeatExchangers.BaseClasses.HexElement | Changed the redeclaration of vol2 to be replaceable,
as vol2 is replaced in some models.
|
The following issues have been fixed:
Add explanation of nStaRef. | |
#70 |
Described in
Buildings.HeatTransfer.Data.Solids
how the parameter nStaRef is used
to compute the spatial grid that is used for simulating transient heat conduction.
|
Assert statement does not fire. | |
#72 |
The blocks Buildings.Utilities.Diagnostics.AssertEquality and
Buildings.Utilities.Diagnostics.AssertInequality did not fire because
the test on the time was in a when instead of an if statement.
This was wrong because when sections are only evaluated
when the condition becomes true.
|
HotWaterTemperatureReset computes wrong results if room temperature differs from nominal value.
|
|
#74 | The equation
TSup = TRoo_in_internal + ((TSup_nominal+TRet_nominal)/2-TRoo_in_internal) * qRel^(1/m) + (TSup_nominal-TRet_nominal)/2 * qRel;should be formulated as TSup = TRoo_in_internal + ((TSup_nominal+TRet_nominal)/2-TRoo_nominal) * qRel^(1/m) + (TSup_nominal-TRet_nominal)/2 * qRel; |
Bug in RadiantSlabs.SingleCircuitSlab fictitious resistance RFic.
|
|
#79 | This bug has been fixed in the assignment of the fictitious thermal resistance by replacing
RFic[nSeg](each G=A/Rx) with
RFic[nSeg](each G=A/nSeg/Rx) .
The bug also affected RadiantSlabs.ParallelCircuitSlab .
|
Note:
- This version contains various updates that allow the syntax of the example models to be checked in the pedantic mode in Dymola 2014.
Extends from Modelica.Icons.ReleaseNotes (Icon for release notes in documentation).
Modelica definition
Buildings.UsersGuide.ReleaseNotes.Version_1_3_build1
Version 1.3 build 1
Information
In version 1.3 build 1, models for direct evaporative cooling coils with multiple stages or with a variable speed compressor have been added. This version also contains improvements to the fan and pump models to better treat zero mass flow rate. Various other improvements have been made to improve the numerics and to use consistent variable names. A detailed list of changes is shown below.
The following new libraries have been added:
Buildings.Fluid.HeatExchangers.DXCoils | Library with direct evaporative cooling coils. |
The following new components have been added to existing libraries:
Buildings.Examples | |
Buildings.Examples.ChillerPlant.DataCenterContinuousTimeControl | Added chilled water plant model with continuous time control that
replaces the discrete time control in
Buildings.Examples.ChillerPlant.DataCenterDiscreteTimeControl .
|
Buildings.Utilities | |
Buildings.Utilities.Psychrometrics.Functions.X_pSatpphi | Function that computes moisture concentration based on saturation pressure, total pressure and relative humidity. |
Buildings.Utilities.Psychrometrics.TWetBul_TDryBulPhi | Block that computes the wet bulb temperature for given dry bulb temperature, relative humidity and atmospheric pressure. |
Buildings.Utilities.Psychrometrics.WetBul_pTX | Block that computes the temperature and mass fraction at the wet bulb state for given dry bulb temperature, species concentration and atmospheric pressure. |
The following existing components have been improved in a backward compatible way:
Buildings.BoundaryConditions | |
Buildings.BoundaryConditions.WeatherData.ReaderTMY3 | Added computation of the wet bulb temperature.
Computing the wet bulb temperature introduces a nonlinear
equation. As we have not observed an increase in computing time
because of computing the wet bulb temperature, it is computed
by default. By setting the parameter
computeWetBulbTemperature=false , the computation of the
wet bulb temperature can be removed.
|
Buildings.Controls | |
Buildings.Controls.SetPoints.OccupancySchedule | Added pre operator and relaxed tolerance in assert statement.
|
Buildings.Fluid | |
Buildings.Fluid.Movers.FlowControlled_dp Buildings.Fluid.Movers.FlowControlled_m_flow Buildings.Fluid.Movers.SpeedControlled_Nrpm Buildings.Fluid.Movers.SpeedControlled_y |
Reformulated implementation of efficiency model to avoid a division by zero at zero mass flow rate for models in which a user specifies a power instead of an efficiency performance curve. |
Buildings.Utilities | |
Buildings.Utilities.Psychrometrics.TWetBul_TDryBulXi | Added option to approximate the wet bulb temperature using an explicit equation. Reformulated the original model to change the dimension of the nonlinear system of equations from two to one. |
The following existing components have been improved in a non-backward compatible way:
Buildings.BoundaryConditions | |
Buildings.BoundaryConditions.WeatherData.ReaderTMY3 Buildings.BoundaryConditions.Types |
Improved the optional inputs for the radiation data global horizontal, diffuse horizontal and direct normal radiation. If a user specifies two of them, the third will be automatically calculated. |
Buildings.BoundaryConditions.SkyTemperature.BlackBody | Renamed radHor to radHorIR
to indicate that the radiation is in the infrared
spectrum.
|
Buildings.Fluid | |
Buildings.Airflow.Multizone.BaseClasses.DoorDiscretized Buildings.Airflow.Multizone.DoorDiscretizedOpen Buildings.Airflow.Multizone.DoorDiscretizedOperable Buildings.Airflow.Multizone.Orifice Buildings.Airflow.Multizone.ZonalFlow_ACS Buildings.Fluid.Actuators.BaseClasses.PartialDamperExponential Buildings.Fluid.Actuators.Dampers.MixingBox Buildings.Fluid.Actuators.Dampers.VAVBoxExponential Buildings.Fluid.BaseClasses.PartialResistance Buildings.Fluid.Interfaces.TwoPortHeatMassExchanger Buildings.Fluid.Movers.BaseClasses.PowerInterface Buildings.Fluid.Storage.BaseClasses.Buoyancy Buildings.Fluid.HeatExchangers.BaseClasses.MassExchange |
Renamed protected parameters for consistency with the naming conventions.
In previous releases, fluid properties had the suffix 0
or _nominal instead of _default when they
where computed based on the medium default properties.
|
Buildings.Fluid.Sensors.SensibleEnthalpyFlowRate Buildings.Fluid.Sensors.LatentEnthalpyFlowRate |
Moved computation of parameter i_w to new base class
Buildings.Fluid.BaseClasses.IndexWater
The value of this parameter is now assigned dynamically and does not require to be specified
by the user.
|
Buildings.Fluid.Storage.BaseClasses.ThirdOrderStratifier | Removed unused protected parameters sta0 and cp0 .
|
Buildings.Examples | |
Buildings.Examples.ChillerPlant.DataCenterDiscreteTimeControl Buildings.Examples.ChillerPlant.BaseClasses.Controls.TrimAndRespond Buildings.Examples.ChillerPlant.BaseClasses.Controls.ZeroOrderHold |
Re-implemented the controls for setpoint reset.
Revised the model TrimAndRespond and deleted the model ZeroOrderHold .
Improved the documentation.
|
The following critical errors have been fixed (i.e., errors that can lead to wrong simulation results):
Buildings.Examples | |
Buildings.Examples.ChillerPlant.DataCenterDiscreteTimeControl | Fixed error in wet bulb temperature. The previous version used a model to compute the wet bulb temperature that takes as an input the relative humidity, but required mass fraction as an input. |
The following uncritical errors have been fixed (i.e., errors that do not lead to wrong simulation results, e.g., units are wrong or errors in documentation):
Buildings.BoundaryConditions | |
Buildings.BoundaryConditions.WeatherData.ReaderTMY3 Buildings.BoundaryConditions.SkyTemperature.BlackBody |
Renamed radHor to radHorIR .
|
Buildings.Fluid | |
Buildings.Fluid.BaseClasses.FlowModels.Examples.InverseFlowFunction | Fixed error in the documentation. |
Buildings.Fluid.Interfaces.TwoPortHeatMassExchanger | Fixed broken link in the documentation. |
Buildings.Fluid.Movers.BaseClasses.Characteristics.powerParameters | Fixed wrong displayUnit and
max attribute for power.
|
Buildings.Fluid.MixingVolumes | In documentation, removed reference to the parameter
use_HeatTransfer which no longer exists.
|
Buildings.HeatTransfer | |
Buildings.HeatTransfer.Windows.Functions.glassPropertyUncoated | Improved the documentation for implementation and added comments for model limitations. |
Extends from Modelica.Icons.ReleaseNotes (Icon for release notes in documentation).
Modelica definition
Buildings.UsersGuide.ReleaseNotes.Version_1_2_build1
Version 1.2 build 1
Information
In version 1.2 build 1, models for radiant slabs and window overhangs and sidefins have been added. This version also contains various improvements to existing models. A detailed list of changes is shown below.
The following new libraries have been added:
Buildings.Fluid.HeatExchangers.RadiantSlabs | Package with models for radiant slabs with pipes or a capillary heat exchanger embedded in the construction. |
Buildings.Fluid.Data.Pipes | Package with records for pipes. |
The following new components have been added to existing libraries:
Buildings.HeatTransfer | |
Buildings.HeatTransfer.Windows.FixedShade Buildings.HeatTransfer.Windows.Overhang Buildings.HeatTransfer.Windows.SideFins |
For windows with either an overhang or side fins, these blocks output the fraction of the area that is sun exposed. |
Buildings.ThermalZones | |
Buildings.ThermalZones.Detailed.Examples.BESTEST | Added BESTEST validation models for case 610, 620, 630, 640, 650FF, 650, 920, 940, 950FF, 950, and 960. |
The following existing components have been improved in a backward compatible way:
Buildings.BoundaryConditions | |
Buildings.BoundaryConditions.WeatherData.ReaderTMY3 | Removed assignment of HGloHor_in in its declaration,
because this gives an overdetermined system if the input connector
is used.Added new sub-bus that contains the solar position. This allows reusing the solar position in various other models. |
Buildings.BoundaryConditions.SolarIrradiation.DiffuseIsotropic Buildings.BoundaryConditions.SolarIrradiation.DiffusePerez Buildings.BoundaryConditions.SolarIrradiation.BaseClasses.DiffuseIsotropic Buildings.BoundaryConditions.SolarIrradiation.BaseClasses.DiffusePerez |
Added optional output of diffuse radiation from the sky and ground. This allows reusing the diffuse radiation in solar thermal collector. |
Buildings.BoundaryConditions.SolarGeometry.BaseClasses.SolarAzimuth | Changed implementation to avoid an event at solar noon. |
Buildings.HeatTransfer | |
Buildings.HeatTransfer.Data.BoreholeFillings |
Renamed class to BoreholeFillings
to be consistent with data records being plural.
|
Buildings.Media | |
Buildings.Media.GasesPTDecoupled.MoistAir Buildings.Media.Air Buildings.Media.PerfectGases.MoistAir Buildings.Media.PerfectGases.MoistAirUnsaturated Buildings.Media.GasesConstantDensity.MoistAir Buildings.Media.GasesConstantDensity.MoistAirUnsaturated |
Added redeclaration of ThermodynamicState
to avoid a warning
during model check and translation.
|
Buildings.ThermalZones | |
Buildings.ThermalZones.Detailed.MixedAir | Added a check that ensures that the number of surfaces
are equal to the length of the parameter that contains
the surface area, and added a check to ensure that no surface area
is equal to zero. These checks help detecting erroneous declarations
of the room model. The changes were done in
Buildings.ThermalZones.Detailed.MixedAir.PartialSurfaceInterface .
|
The following existing components have been improved in a non-backward compatible way:
Buildings.ThermalZones | |
Buildings.ThermalZones.Detailed.MixedAir | Added optional modeling of window overhangs and side fins.
The modeling of window overhangs and side fins required the
introduction of the new parameters
hWin for the window height and
wWin for the window width, in addition to the
parameters ove and sidFin which are used
to declare the geometry of overhangs and side fins.
The parameters hWin and wWin
replace the previously used parameter AWin for the
window area.
Users need to manually replace AWin with hWin
and wWin when updating models
from a previous version of the library.See the information section in Buildings.ThermalZones.Detailed.MixedAir for how to use these models.
|
The following critical errors have been fixed (i.e., errors that can lead to wrong simulation results):
Buildings.Controls | |
Buildings.Controls.SetPoints.OccupancySchedule | Fixed a bug that caused an error in the schedule if the simulation start time was negative or equal to the first entry in the schedule. |
Buildings.Fluid | |
Buildings.Fluid.Storage.BaseClass.ThirdOrderStratifier | Revised the implementation to reduce the temperature overshoot. |
Buildings.HeatTransfer | |
Buildings.HeatTransfer.Windows.BaseClasses.GlassLayer | Fixed the bug in the temperature linearization and in the heat flow through the glass layer if the transmissivity of glass in the infrared regime is non-zero. |
Buildings.HeatTransfer.Windows.BaseClasses.CenterOfGlass | Fixed a bug in the parameter assignment of the instance glass .
Previously, the infrared emissivity of surface a was assigned to the surface b.
|
Buildings.Utilities | |
Buildings.Utilities.IO.BCVTB | Added a call to Buildings.Utilities.IO.BCVTB.BaseClasses.exchangeReals
in the initial algorithm section.
This is needed to propagate the initial condition to the server.
It also leads to one more data exchange, which is correct and avoids the
warning message in Ptolemy that says that the simulation reached its stop time
one time step prior to the final time.
|
The following uncritical errors have been fixed (i.e., errors that do not lead to wrong simulation results, e.g., units are wrong or errors in documentation):
Buildings.BoundaryConditions | |
Buildings.BoundaryConditions.WeatherData.ReaderTMY3 | Corrected the documentation of the unit requirement for input files, parameters and connectors. |
Buildings.Fluid | |
Buildings.Fluid.Interfaces.PartialFourPortInterface Buildings.Fluid.Interfaces.PartialTwoPortInterface |
Replaced the erroneous function call Medium.density with
Medium1.density and Medium2.density in
PartialFourPortInterface .
Changed condition to remove sta_a1 and
sta_a2 in PartialFourPortInterface , and
sta_a in PartialTwoPortInterface , to also
compute the state at the inlet port if show_V_flow=true .The previous implementation resulted in a translation error if show_V_flow=true , but worked correctly otherwise
because the erroneous function call is removed if show_V_flow=false .
|
Buildings.Fluid.Chillers.Examples.BaseClasses.PartialElectric | Corrected the nominal mass flow rate used in the mass flow source. |
The following issues have been fixed:
Heat transfer in glass layer | |
#56 | Fixed bug in heat flow through the glass layer if the infrared transmissivity is non-zero. |
#57 | Fixed bug in temperature linearization of window glass. |
Overshooting in enhanced stratified tank | |
#15 | Revised the implementation to reduce the temperature over-shoot. |
Extends from Modelica.Icons.ReleaseNotes (Icon for release notes in documentation).
Modelica definition
Buildings.UsersGuide.ReleaseNotes.Version_1_1_build1
Version 1.1 build 1
Information
Version 1.1 build 1 contains improvements to models that address numerical problems.
In particular, flow machines and actuators now have an optional filter
that converts step changes in the input signal to a smooth change in
speed or actuator position.
Also, (Buildings.Examples.Tutorial
)
has been added to provide step-by-step instruction for how to build
system models.
The following new libraries have been added:
Buildings.Examples.Tutorial | Tutorial with step by step instructions for how to build system models. |
The following new components have been added to existing libraries:
Buildings.Fluid | |
Buildings.Fluid.FixedResistances.Pipe | Added a model for a pipe with transport delay and optional heat exchange with the environment. |
Buildings.Fluid.Actuators.UsersGuide | Added a user's guide for actuator models. |
Buildings.Fluid.Interfaces.ConservationEquation Buildings.Fluid.Interfaces.StaticConservationEquation |
These base classes have been added to simplify the implementation of dynamic and steady-state thermofluid models. |
Buildings.Fluid.Data.Fuels | Package with physical properties of fuels that are used by the boiler model. |
The following existing components have been improved in a backward compatible way:
Buildings.Fluid | |
Buildings.Fluid.Actuators.Dampers.Exponential Buildings.Fluid.Actuators.Dampers.VAVBoxExponential Buildings.Fluid.Actuators.Dampers.MixingBox Buildings.Fluid.Actuators.Dampers.MixingBoxMinimumFlow Buildings.Fluid.Actuators.Valves.ThreeWayEqualPercentageLinear Buildings.Fluid.Actuators.Valves.ThreeWayLinear Buildings.Fluid.Actuators.Valves.TwoWayEqualPercentage Buildings.Fluid.Actuators.Valves.TwoWayLinear Buildings.Fluid.Actuators.Valves.TwoWayQuickOpening |
Added an optional 2nd order lowpass filter for the input signal.
The filter approximates the travel time of the actuators.
It also makes the system of equations easier to solve
because a step change in the input signal causes a gradual change in the actuator
position. Note that this filter affects the time response of closed loop control. Therefore, enabling the filter may require retuning of control loops. See the user's guide of the Buildings.Fluid.Actuators package. |
Buildings.Fluid.Boilers.BoilerPolynomial | Added computation of fuel usage and improved the documentation. |
Buildings.Fluid.Movers.SpeedControlled_y Buildings.Fluid.Movers.SpeedControlled_Nrpm Buildings.Fluid.Movers.FlowControlled_dp Buildings.Fluid.Movers.FlowControlled_m_flow |
Added a 2nd order lowpass filter to the input signal.
The filter approximates the startup and shutdown transients of fans or pumps.
It also makes the system of equations easier to solve
because a step change in the input signal causes a gradual change in the
mass flow rate. Note that this filter affects the time response of closed loop control. Therefore, enabling the filter may require retuning of control loops. See the user's guide of the Buildings.Fluid.Movers package. |
Buildings.Fluid.Interfaces.StaticTwoPortHeatMassExchanger | Changed model to use graphical implementation of models for pressure drop and conservation equations. |
Buildings.Fluid.BaseClasses.PartialResistance Buildings.Fluid.FixedResistances.FixedResistanceDpM Buildings.Fluid.Actuators.BaseClasses.PartialTwoWayValve Buildings.Fluid.Actuators.BaseClasses.PartialDamperExponential |
Revised base classes and models to simplify object inheritance tree.
Set m_flow_small to final in Buildings.Fluid.BaseClasses.PartialResistance,
and removed its assignment in the other classes.
|
Buildings.Fluid.FixedResistances.FixedResistanceDpM Buildings.Fluid.FixedResistances.SplitterFixedResistanceDpM |
Improved documentation. |
Buildings.HeatTransfer | |
Buildings.HeatTransfer.Windows.Functions.glassProperty | Added the function glassPropertyUncoated that calculates the property for uncoated glass.
|
Buildings.ThermalZones | |
Buildings.ThermalZones.Detailed.MixedAir | Changed model to use new implementation of Buildings.HeatTransfer.Radiosity.OutdoorRadiosity in its base classes. This change leads to the use of the same equations for the radiative heat transfer between window and ambient as is used for the opaque constructions. |
The following existing components have been improved in a non-backward compatible way:
Buildings.Fluid | |
Buildings.Fluid.Actuators.Valves.ThreeWayEqualPercentageLinear Buildings.Fluid.Actuators.Valves.ThreeWayLinear Buildings.Fluid.Actuators.Valves.TwoWayEqualPercentage Buildings.Fluid.Actuators.Valves.TwoWayLinear Buildings.Fluid.Actuators.Valves.TwoWayQuickOpening |
Changed models to allow modeling of a fixed resistance that is
within the controlled flow leg. This allows in some cases
to avoid a nonlinear equation if a flow resistance is
in series to the valve.
This change required changing the parameter for the valve resistance
dp_nominal to dpValve_nominal ,
and introducing the parameter
dpFixed_nominal , with dpFixed_nominal=0
as its default value.
Previous models that instantiate these components need to change the
assignment of dp_nominal to an assignment of
dpValve_nominal .
See also Buildings.Fluid.Actuators.UsersGuide .
|
Buildings.HeatTransfer | |
Buildings.HeatTransfer.Radiosity.OutdoorRadiosity Buildings.HeatTransfer.Windows.ExteriorHeatTransfer |
Changed model to use new implementation of Buildings.HeatTransfer.Radiosity.OutdoorRadiosity. This change leads to the use of the same equations for the radiative heat transfer between window and ambient as is used for the opaque constructions. |
Buildings.Controls | |
Buildings.Controls.SetPoints.OccupancySchedule | Changed model to fix a bug that caused the output of the block
to be incorrect when the simulation started
at a time different from zero.
When fixing this bug, the parameter startTime was removed,
and the parameter endTime was renamed to period .
The period always starts at t=0 seconds.
|
The following critical errors have been fixed (i.e., errors that can lead to wrong simulation results):
Buildings.Controls | |
Buildings.Controls.SetPoints.OccupancySchedule | The output of the block was incorrect when the simulation started at a time different from zero. |
Buildings.Fluid.HeatExchangers | |
Buildings.Fluid.HeatExchangers.DryCoilCounterFlow Buildings.Fluid.HeatExchangers.WetCoilCounterFlow |
Corrected error in assignment of dp2_nominal .
The previous assignment caused a pressure drop in all except one element,
instead of the opposite. This caused too high a flow resistance
of the heat exchanger.
|
The following uncritical errors have been fixed (i.e., errors that do not lead to wrong simulation results, e.g., units are wrong or errors in documentation):
Buildings.BoundaryConditions | |
Buildings.BoundaryConditions.SkyTemperature.BlackBody | Fixed error in BlackBody model that was causing a translation error when calTSky was set to Buildings.BoundaryConditions.Types.SkyTemperatureCalculation.HorizontalRadiation .
|
Buildings.Fluid | |
Buildings.Fluid.Interfaces.TwoPortHeatMassExchanger | Fixed wrong class reference in information section. |
Buildings.Utilities | |
Buildings.Utilities.IO.BCVTB.Examples.MoistAir | Updated fan parameters, which were still for version 0.12 of the Buildings library and hence caused a translation error with version 1.0 or higher. |
The following issues have been fixed:
Exterior longwave radiation exchange in window model | |
#51 | Changed model to use new implementation of Buildings.HeatTransfer.Radiosity.OutdoorRadiosity. This change leads to the use of the same equations for the radiative heat transfer between window and ambient as is used for the opaque constructions. |
#53 | Fixed bug in Buildings.Controls.SetPoints.OccupancySchedule that led to wrong results when the simulation started at a time different from zero. |
Note:
-
The use of filters for actuator and flow machine input
signals changes the dynamic response of feedback control loops.
Therefore, control gains may need to be retuned.
See
Buildings.Fluid.Actuators.UsersGuide
andBuildings.Fluid.Movers.UsersGuide
for recommended control gains and further details.
Extends from Modelica.Icons.ReleaseNotes (Icon for release notes in documentation).
Modelica definition
Buildings.UsersGuide.ReleaseNotes.Version_1_0_build2
Version 1.0 build 2
Information
Version 1.0 build 2 has been released to correct model errors that were present in version 1.0 build 1. Both versions are compatible. In addition, version 1.0 build 2 contains improved documentation of various example models.
The following existing components have been improved in a backward compatible way:
Buildings.Controls | |
Buildings.Controls.Continuous Buildings.Controls.Discrete Buildings.Controls.SetPoints |
Improved documentation of models and of examples. |
Buildings.Airflow.Multizone | |
Buildings.Airflow.Multizone.DoorDiscretizedOpen Buildings.Airflow.Multizone.DoorDiscretizedOperable |
Changed the computation of the discharge coefficient to use the
nominal density instead of the actual density.
Computing sqrt(2/rho) sometimes causes warnings from the solver,
as it seems to try negative values for the density during iterative solutions.
|
Buildings.Airflow.Multizone.Examples | Improved documentation of examples. |
Buildings.Examples.DualFanDualDuct | |
Buildings.Examples.DualFanDualDuct.Controls.RoomMixingBox | Improved control of minimum air flow rate to avoid overheating. |
The following critical errors have been fixed (i.e., errors that can lead to wrong simulation results):
Buildings.HeatTransfer | |
Buildings.HeatTransfer.Convection.Exterior | Fixed error in assignment of wind-based convection coefficient. The old implementation did not take into account the surface roughness. |
Buildings.ThermalZones | |
Buildings.ThermalZones.Detailed.BaseClasses.SolarRadiationExchange | In the previous version, the radiative properties of the long-wave spectrum instead of the solar spectrum have been used to compute the distribution of the solar radiation among the surfaces inside the room. |
Buildings.ThermalZones.Detailed.BaseClasses.MixedAir | Added missing connect statement between window frame surface and window frame convection model. Prior to this bug fix, no convective heat transfer was computed between window frame and room air. |
Buildings.ThermalZones.Detailed.BaseClasses.HeatGain | Fixed bug that caused convective heat gains to be removed from the room instead of added to the room. |
The following issues have been fixed:
Buildings.Fluid.Geothermal.Boreholes | |
#45 | Dymola 2012 FD01 hangs when simulating a borehole heat exchanger.
This was caused by a wrong release of memory in freeArray.c .
|
Buildings.ThermalZones | |
#46 | The convective internal heat gain has the wrong sign. |
Extends from Modelica.Icons.ReleaseNotes (Icon for release notes in documentation).
Modelica definition
Buildings.UsersGuide.ReleaseNotes.Version_1_0_build1
Version 1.0 build 1
Information
Version 1.0 is the first official release of the Buildings
library.
Compared to the last pre-release, which is version 0.12, this version contains
new models as well as significant improvements to the model formulation
that leads to faster and more robust simulation. A detailed list of changes is shown below.
Version 1.0 is not backward compatible to version 0.12, i.e., models developed with versions 0.12 will require some changes in their parameters to work with version 1.0. The conversion script Buildings/Resources/Scripts/Conversion/ConvertBuildings_from_0.12_to_1.0.mos can help in converting old models to this version of the library.
The following new libraries have been added:
Buildings.Fluid.Geothermal.Boreholes | This is a library with a model for a borehole heat exchanger. |
The following new components have been added to existing libraries:
Buildings.Airflow.Multizone | |
Buildings.Airflow.Multizone.BaseClasses.windPressureLowRise | Added a function that computes wind pressure on the facade of low-rise buildings. |
Buildings.Examples | |
Buildings.Examples.ChillerPlant | Added an example for a chilled water plant model. |
Buildings.Fluid.Interfaces | |
Buildings.Fluid.Interfaces.UsersGuide | Added a user's guide that describes the main functionality of all base classes. |
Buildings.Fluid.Sources | |
Buildings.Fluid.Sources.Outside_Cp Buildings.Fluid.Sources.Outside_CpLowRise |
Added models to compute wind pressure on building facades. |
Buildings.HeatTransfer | |
Buildings.HeatTransfer.Conductor | Added a model for heat conduction in circular coordinates. |
Buildings.ThermalZones.Detailed.Examples | |
Buildings.ThermalZones.Detailed.Examples.BESTEST | Added BESTEST validation models. |
Buildings.Utilities.Math | |
Buildings.Utilities.Math.Functions.cubicHermiteLinearExtrapolation Buildings.Utilities.Math.Functions.splineDerivatives. |
Added functions for cubic hermite spline interpolation, with option for monotone increasing (or decreasing) spline. |
The following existing components have been improved in a backward compatible way:
Buildings.Airflow.Multizone | |
Buildings.Airflow.Multizone.BaseClasses.powerLaw | This function has been reimplemented to handle zero flow rate in a more robust and more efficient way. This change improves all components that model flow resistance in the package Buildings.Airflow.Multizone. |
Buildings.BoundaryConditions.WeatherData | |
Buildings.BoundaryConditions.WeatherData.ReaderTMY3 | This model has now the option of using a constant value, using the data from the weather file, or from an input connector for 7 variables, including atmospheric pressure, relative humidity, dry bulb temperature, global horizontal radiation, diffuse horizontal radiation, wind direction and wind speed. |
Buildings.Fluid | |
Buildings.Fluid.Actuators.BaseClasses.PartialActuator Buildings.Fluid.Actuators.BaseClasses.PartialDamperExponential Buildings.Fluid.Actuators.BaseClasses.PartialTwoWayValve Buildings.Fluid.BaseClasses.PartialResistance Buildings.Fluid.BaseClasses.FlowModels.basicFlowFunction_dp Buildings.Fluid.BaseClasses.FlowModels.basicFlowFunction_m_flow Buildings.Fluid.Interfaces.StaticTwoPortHeatMassExchanger |
The computation of the linearized flow resistance has been moved from
the functions to the model, i.e., into an equation section.
If the linear implementation is in a function body, then a symbolic processor
may not invert the equation. This can lead to systems of coupled equations in
cases where an explicit solution is possible.
In addition, the handling of zero flow rate has been improved for the nonlinear
pressure drop model.
These improvements affect all models in Buildings.Fluid that compute
flow resistance. |
Buildings.Fluid.HeatExchangers | |
Buildings.Fluid.HeatExchangers.HeaterCoolerPrescribed | This model can now be configured as a steady-state or dynamic model. |
Buildings.Fluid.HeatExchangers.DryCoilCounterFlow Buildings.Fluid.HeatExchangers.WetCoilCounterFlow Buildings.Fluid.HeatExchangers.DryCoilDiscretized Buildings.Fluid.HeatExchangers.WetCoilDiscretized |
The implementation for handling zero flow rate, if the models are used as steady-state models, have been improved. |
Buildings.Fluid.HeatExchangers.BaseClasses.ntu_epsilonZ | Changed implementation to use
Modelica.Media.Common.OneNonLinearEquation instead of
Buildings.Utilities.Math.BaseClasses.OneNonLinearEquation ,
which was removed for this version of the library.
|
Buildings.Fluid.HeatExchangers.CoolingTowers | |
Buildings.Fluid.HeatExchangers.CoolingTowers.YorkCalc Buildings.Fluid.HeatExchangers.CoolingTowers.FixedApproach |
These models are now based on a new base class Buildings.Fluid.HeatExchangers.CoolingTowers.BaseClasses.CoolingTower .
This allows using the models as replaceable models without warning when checking the model.
|
Buildings.Fluid.HeatExchangers.CoolingTowers.YorkCalc | Changed implementation of performance curve to avoid division by zero. |
Buildings.Fluid.MassExchangers | |
Buildings.Fluid.MassExchangers.HumidifierPrescribed | This model can now be configured as a steady-state or dynamic model. |
Buildings.Fluid.Sensors | |
Buildings.Fluid.Sensors.*TwoPort | All sensors with two ports, except for the mass flow rate sensor,
have been revised to add sensor dynamics.
Adding sensor dynamics avoids numerical problems when mass flow
rates are close to zero and the sensor is configured to allow
flow reversal. See
Buildings.Fluid.Sensors.UsersGuide for details. |
Buildings.Fluid.Storage | |
Buildings.Fluid.Storage.Stratified Buildings.Fluid.Storage.StratifiedEnhanced |
Changed the implementation of the model Buoyancy
to make it differentiable in the temperatures. |
Buildings.Media | |
Buildings.Media.Interfaces.PartialSimpleMedium Buildings.Media.Interfaces.PartialSimpleIdealGasMedium |
Moved the assignment of the stateSelect attribute for
the BaseProperties to the model
Buildings.Fluid.MixingVolumes.MixingVolume . This allows
to handle it differently for steady-state and dynamic models. |
Buildings.Utilities.Psychrometrics | |
Buildings.Utilities.Psychrometrics.Functions.TDewPoi_pW | Changed implementation to use
Modelica.Media.Common.OneNonLinearEquation instead of
Buildings.Utilities.Math.BaseClasses.OneNonLinearEquation ,
which was removed for this version of the library.
|
The following existing components have been improved in a non-backward compatible way:
Buildings.Airflow.Multizone | |
Buildings.Airflow.Multizone.MediumColumnDynamic | The implementation has been changed to better handle mass flow rates
near zero flow.
This required the introduction of a new parameter m_flow_nominal
that is used for the regularization near zero mass flow rate. |
Buildings.Fluid | |
Buildings.Fluid.Storage.Examples.Stratified Buildings.Fluid.MixingVolumes |
Removed the parameters use_T_start and h_start ,
as T_start is more convenient to use than h_start
for building simulation.
|
Buildings.Fluid.Boilers | |
Buildings.Fluid.Boilers.BoilerPolynomial | The parameter dT_nominal has been removed
as it can be computed from the parameter m_flow_nominal .
This change was needed to avoid a non-literal value for the nominal
attribute for the mass flow rate in the pressure drop model. |
Buildings.Fluid.MixingVolumes | |
Buildings.Fluid.MixingVolumes.MixingVolume Buildings.Fluid.MixingVolumes.MixingVolumeDryAir Buildings.Fluid.MixingVolumes.MixingVolumeMoistAir |
The implementation has been changed to better handle mass flow rates
near zero flow if the components have exactly two fluid ports connected.
This required the introduction of a new parameter m_flow_nominal
that is used for the regularization near zero mass flow rate. |
Buildings.Fluid.Movers | |
Buildings.Fluid.Movers.SpeedControlled_y Buildings.Fluid.Movers.SpeedControlled_Nrpm Buildings.Fluid.Movers.FlowControlled_dp Buildings.Fluid.Movers.FlowControlled_m_flow |
The performance data are now defined through records and not
through replaceable functions. The performance data now needs to be
declared in the formpressure(V_flow_nominal={0,V_flow_nominal,2*V_flow_nominal}, dp_nominal={2*dp_nominal,dp_nominal,0})where pressure is an instance of a record. A similar declaration is
used for power and efficiency.
The parameter m_flow_nominal has been removed from FlowMachine_y and FlowMachine_Nrpm. The parameter m_flow_max has been replaced by m_flow_nominal in FlowMachine_m_flow. The implementation of the pressure drop computation as a function of speed and volume flow rate has been revised to avoid a singularity near zero volume flow rate and zero speed. The implementation has also been simplified to avoid using two different flow paths if the models are configured for steady-state or dynamic simulation. |
Buildings.Fluid.Interfaces | |
Buildings.Fluid.Interfaces.FourPortHeatMassExchanger Buildings.Fluid.Interfaces.PartialDynamicStaticFourPortHeatMassExchanger Buildings.Fluid.Interfaces.TwoPortHeatMassExchanger Buildings.Fluid.Interfaces.PartialDynamicStaticTwoPortHeatMassExchanger Buildings.Fluid.Interfaces.ConservationEquation |
The implementation has been changed to better handle mass flow rates near zero flow if the components have exactly two fluid ports connected. |
Buildings.Fluid.Sensors | |
Buildings.Fluid.Sensors.TemperatureTwoPortDynamic | This model has been deleted since the sensor
Buildings.Fluid.Sensors.TemperatureTwoPort has been revised
and can now also be used as a dynamic model of a sensor. |
Buildings.Fluid.Interfaces | |
Buildings.Fluid.Interfaces.PartialStaticTwoPortInterface | Renamed to Buildings.Fluid.Interfaces.PartialTwoPortInterface |
Buildings.Fluid.Interfaces.PartialStaticStaticTwoPortHeatMassExchanger | Renamed to Buildings.Fluid.Interfaces.StaticTwoPortHeatMassExchanger |
Buildings.Fluid.Interfaces.PartialTwoPortHeatMassExchanger | Renamed to Buildings.Fluid.Interfaces.TwoPortHeatMassExchanger |
Buildings.Fluid.Interfaces.PartialFourPort | Renamed to Buildings.Fluid.Interfaces.FourPort |
Buildings.Fluid.Interfaces.PartialStaticStaticFourPortHeatMassExchanger | Renamed to Buildings.Fluid.Interfaces.StaticFourPortHeatMassExchanger |
Buildings.Fluid.Interfaces.PartialStaticFourPortInterface | Renamed to Buildings.Fluid.Interfaces.PartialFourPortInterface |
Buildings.Fluid.Interfaces.PartialFourPortHeatMassExchanger | Renamed to Buildings.Fluid.Interfaces.FourPortHeatMassExchanger |
Buildings.Utilities.Math | |
Buildings.Utilities.Math.BaseClasses.OneNonLinearEquation | This package has been removed, and all functions have been revised to use Modelica.Media.Common.OneNonLinearEquation. |
Buildings.Utilities.Reports | |
Buildings.Utilities.IO.Files.Printer Buildings.Utilities.IO.Files.BaseClasses.printRealArray |
Changed parameter precision to significantDigits and
minimumWidth to minimumLength
to use the same terminology as the Modelica Standard Library. |
The following critical errors have been fixed (i.e., errors that can lead to wrong simulation results):
Buildings.BoundaryConditions | |
Buildings.BoundaryConditions.SkyTemperature.BlackBody | Fixed error in if-then statement that led to
a selection of the wrong branch to compute the sky temperature. |
Buildings.Media | |
Buildings.Media.PartialSimpleMedium Buildings.Media.GasesConstantDensity.SimpleAir |
Fixed error in assignment of singleState parameter.
This change can lead to different initial conditions if the density of
water is modeled as a function of pressure, or if the
medium model Buildings.Media.GasesConstantDensity.SimpleAir is used. |
Buildings.Media.GasesConstantDensity Buildings.Media.GasesConstantDensity.MoistAir Buildings.Media.GasesConstantDensity.MoistAirUnsaturated Buildings.Media.GasesConstantDensity.SimpleAir |
Fixed error in the function density which returned a non-constant density,
and added a call to ModelicaError(...) in setState_dTX since this
function cannot assign the medium pressure based on the density (as density is a constant
in this model).
|
Buildings.Media.Interfaces.PartialSimpleIdealGasMedium | Updated package with a new copy from the Modelica Standard Library, since the Modelica Standard Library fixed a bug in computing the internal energy of the medium. This bug led to very fast temperature transients at the start of the simulation. |
Buildings.Media.Interfaces.PartialSimpleMedium | Fixed bug in function density, which always returned d_const ,
regardless of the value of constantDensity .
|
Buildings.Media.GasesPTDecoupled | Fixed bug in u=h-R*T , which is only valid for ideal gases.
For this medium, the function is u=h-pStd/dStp .
|
Buildings.Media.GasesConstantDensity | Fixed bug in u=h-R*T , which is only valid for ideal gases.
For this medium, the function is u=h-p/dStp .
|
Buildings.ThermalZones | |
Buildings.ThermalZones.Detailed.MixedAir Buildings.ThermalZones.Detailed.BaseClasses.ExteriorBoundaryConditions |
Fixed bug (issue 35) that leads to the wrong solar heat gain for roofs and for floors. Prior to this bug fix, the outside facing surface of a ceiling received solar irradiation as if it were a floor and vice versa. |
Buildings.ThermalZones.Detailed.MixedAir Buildings.ThermalZones.Detailed.BaseClasses.ExteriorBoundaryConditionsWithWindow |
Fixed bug (issue 36) that leads to too high a surface temperature of the window frame when it receives solar radiation. The previous version did not compute the infrared radiation exchange between the window frame and the sky. |
The following uncritical errors have been fixed (i.e., errors that do not lead to wrong simulation results, but, e.g., units are wrong or errors in documentation):
Buildings.BoundaryConditions | |
Buildings.BoundaryConditions.WeatherData.BaseClasses.ConvertRadiation | Corrected wrong unit label. |
The following issues have been fixed:
Buildings.BoundaryConditions | |
#8 | Add switches for new data. |
#19 | Shift the time for the radiation data 30 min forth and output the local civil time in the data reader. |
#41 | Using when-then sentences to reduce CPU time. |
#43 | Add a ConvertRadiation to convert the unit of radiation from TMY3. |
Buildings.Fluid | |
#28 | Move scripts to Buildings\Resources\Scripts\Dymola. |
Buildings.HeatTransfer | |
#18 | Add a smooth interpolation function to avoid the event. |
Buildings.Media | |
#30 | Removed non-required structurally incomplete annotation. |
Buildings.ThermalZones | |
#35 | Wrong surface tilt for radiation at exterior surfaces of floors and ceilings. |
#36 | High window frame temperatures. |
Note:
-
The version number scheme has been changed. It is now identical to the one used by the Modelica Standard Library.
Versions are identified with two numbers
x.y
and a build number. The first official release of each version has the build number1
. For each released bug fix, the build number is incremented. SeeModelica.UsersGuide.ReleaseNotes.VersionManagement
for details. -
To allow adding scripts for multiple simulation environments,
all scripts have been moved to the directory
Buildings/Resources/Scripts/Dymola
and the annotation that generates the entry in theCommand
pull down menu has been changed to__Dymola_Commands(file=...)
Extends from Modelica.Icons.ReleaseNotes (Icon for release notes in documentation).
Modelica definition
Buildings.UsersGuide.ReleaseNotes.Version_0_12_0
Version 0.12.0
Information
Note: The packages whose name ends with Beta
are still being validated.
The following critical error has been fixed (i.e. error that can lead to wrong simulation results):
Buildings.ThermalZones | |
Buildings.ThermalZones.Detailed.BaseClasses.InfraredRadiationExchange |
The model Buildings.ThermalZones.Detailed.BaseClasses.InfraredRadiationExchange
had an error in the view factor approximation.
The error caused too much radiosity to flow from large to small surfaces because the law of reciprocity
for view factors was not satisfied. This led to low surface temperatures if a surface had a large area
compared to other surfaces.
The bug has been fixed by rewriting the view factor calculation.
|
The following improvements and additions have been made:
- Updated library to Modelica 3.2.
-
Added
homotopy
operator. -
Restructured package
Buildings.HeatTransfer
. -
Rewrote the models in
Buildings.Fluid.Actuators
to avoid having the flow coefficientk
as an algebraic variable. This increases robustness. -
Rewrote energy, species and trace substance balance in
Buildings.Fluid.Interfaces.StaticTwoPortHeatMassExchanger
to better handle zero mass flow rate. -
Implemented functions
enthalpyOfCondensingGas
andsaturationPressure
in single substance media to allow use of the room model with media that do not contain water vapor. -
Revised
Buildings.Fluid.Sources.Outside
to allow use of the room model with media that do not contain water vapor.
Extends from Modelica.Icons.ReleaseNotes (Icon for release notes in documentation).
Modelica definition
Buildings.UsersGuide.ReleaseNotes.Version_0_11_0
Version 0.11.0
Information
Note: The packages whose name ends with Beta
are still being validated.
-
Added the package
Buildings.ThermalZones.Detailed
to compute heat transfer in rooms and through the building envelope. Multiple instances of these models can be connected to create a multi-zone building model. -
Added the package
Buildings.HeatTransfer.Windows
to compute heat transfer (solar radiation, infrared radiation, convection and conduction) through glazing systems. -
In package
Buildings.Fluid.Chillers
, added the chiller modelsBuildings.Fluid.Chillers.ElectricReformulatedEIR
andBuildings.Fluid.Cphillers.ElectricEIR
, and added the packageBuildings.Fluid.Chillers.Data
that contains data sets of chiller performance data. -
Added package
Buildings.BoundaryConditions
with models to compute boundary conditions, such as solar irradiation and sky temperature. -
Added package
Buildings.Utilities.IO.WeatherData
with models to read weather data in the TMY3 format. -
Revised the package
Buildings.Fluid.Sensors
. -
Revised the package
Buildings.Fluid.HeatExchangers.CoolingTowers
. -
In
Buildings.Fluid.Interfaces.StaticFourPortHeatMassExchanger
andBuildings.Fluid.Interfaces.StaticFourPortHeatMassExchanger
, fixed bug in energy and moisture balance that affected results if a component adds or removes moisture to the air stream. In the old implementation, the enthalpy and species outflow atport_b
was multiplied with the mass flow rate atport_a
. The old implementation led to small errors that were proportional to the amount of moisture change. For example, if the moisture added by the component was0.005 kg/kg
, then the error was0.5%
. Also, the results for forward flow and reverse flow differed by this amount. With the new implementation, the energy and moisture balance is exact. -
In
Buildings.Fluid.Interfaces.ConservationEquation
and inBuildings.Media.Interfaces.PartialSimpleMedium
, set nominal attribute for medium to provide consistent normalization. Without this change, Dymola 7.4 uses different values for the nominal attribute based on the value ofAdvanced.OutputModelicaCodeWithJacobians=true/false;
in the modelBuildings.Examples.HydronicHeating
. -
Fixed bug in energy balance of
Buildings.Fluid.Chillers.Carnot
. -
Fixed bug in efficiency curves in package
Buildings.Fluid.Movers.BaseClasses.Characteristics
.
Extends from Modelica.Icons.ReleaseNotes (Icon for release notes in documentation).
Modelica definition
Buildings.UsersGuide.ReleaseNotes.Version_0_10_0
Version 0.10.0
Information
-
Added package
Buildings.Airflow.Multizone
with models for multizone airflow and contaminant transport. -
Added the model
Buildings.Utilities.Comfort.Fanger
for thermal comfort calculations. -
Rewrote
Buildings.Fluid.Storage.BaseClasses.ThirdOrderStratifier
, which is used inBuildings.Fluid.Storage.StratifiedEnhanced
, to avoid state events when the flow reverses. This leads to faster and more robust simulation. -
In models of package
Buildings.Fluid.MixingVolumes
, added nominal value formC
to avoid wrong trajectory when concentration is around 1E-7. See also https://trac.modelica.org/Modelica/ticket/393. - Fixed bug in fan and pump models that led to too small an enthalpy increase across the flow device.
-
In model
Buildings.Fluid.Movers.FlowControlled_dp
, changedassert(dp_in ≥ 0, ...)
toassert(dp_in ≥ -0.1, ...)
. The former implementation triggered the assert ifdp_in
was solved for in a nonlinear equation since the solution can be slightly negative while still being within the solver tolerance. -
Added model
Buildings.Controls.SetPoints.Table
that allows the specification of a floating setpoint using a table of values. -
Revised model
Buildings.Fluid.HeatExchangers.Radiators.RadiatorEN442_2
. The new version has exactly the same nominal power during the simulation as specified by the parameters. This also required a change in the parameters.
Extends from Modelica.Icons.ReleaseNotes (Icon for release notes in documentation).
Modelica definition
Buildings.UsersGuide.ReleaseNotes.Version_0_9_1
Version 0.9.1
Information
The following critical error has been fixed (i.e. error that can lead to wrong simulation results):
Buildings.Fluid.Storage. | |
Buildings.Fluid.Storage.StratifiedEnhanced |
The model Buildings.Fluid.Storage.BaseClasses.Stratifier
had a sign error that lead to a wrong energy balance.
The model that was affected by this error is
Buildings.Fluid.Storage.StratifiedEnhanced .
The model
Buildings.Fluid.Storage.Stratified was not affected.The bug has been fixed by using the newly introduced model Buildings.Fluid.Storage.BaseClasses.ThirdOrderStratifier . This model
uses a third-order upwind scheme to reduce the numerical dissipation instead of the
correction term that was used in Buildings.Fluid.Storage.BaseClasses.Stratifier .
The model Buildings.Fluid.Storage.BaseClasses.Stratifier has been removed since it
also led to significant overshoot in temperatures when the stratification was pronounced.
|
Extends from Modelica.Icons.ReleaseNotes (Icon for release notes in documentation).
Modelica definition
Buildings.UsersGuide.ReleaseNotes.Version_0_9_0
Version 0.9.0
Information
-
Added the following heat exchanger models
-
Buildings.Fluid.HeatExchangers.DryEffectivenessNTU
for a sensible heat exchanger that uses theepsilon-NTU
relations to compute the heat transfer. -
Buildings.Fluid.HeatExchangers.DryCoilCounterFlow
andBuildings.Fluid.HeatExchangers.WetCoilCounterFlow
to model a coil without and with water vapor condensation. These models approximate the coil as a counterflow heat exchanger.
-
-
Revised air damper
Buildings.Fluid.Actuators.BaseClasses.exponentialDamper
. The new implementation avoids warnings and leads to faster convergence since the solver does not attempt anymore to solve for a variable that needs to be strictly positive. -
Revised package
Buildings.Fluid.Movers
to allow zero flow for some pump or fan models. If the input to the model is the control signaly
, then the flow is equal to zero ify=0
. This change required rewriting the package to avoid division by the rotational speed. -
Revised package
Buildings.HeatTransfer
to include a model for a multi-layer construction, and to allow individual material layers to be computed steady-state or transient. -
In package
Buildings.Fluid
, changed models so that if the parameterdp_nominal
is set to zero, then the pressure drop equation is removed. This allows, for example, to model a heating and a cooling coil in series, and lump there pressure drops into a single element, thereby reducing the dimension of the nonlinear system of equations. -
Added model
Buildings.Controls.Continuous.LimPID
, which is identical toModelica.Blocks.Continuous.LimPID
, except that it allows reverse control action. This simplifies use of the controller for cooling applications. -
Added model
Buildings.Fluid.Actuators.Dampers.MixingBox
for an outside air mixing box with air dampers. -
Changed implementation of flow resistance in
Buildings.Fluid.Actuators.Dampers.MixingBoxMinimumFlow
. Instead of using a fixed resistance and a damper model in series, only one model is used that internally adds these two resistances. This leads to smaller systems of nonlinear equations. -
Changed
Buildings.Media.PerfectGases.MoistAir.T_phX
(and by inheritance all other moist air medium models) to first computeT
in closed form assuming no saturation. Then, a check is done to determine whether the state is in the fog region. If the state is in the fog region, thenInternal.solve
is called. This new implementation can lead to significantly shorter computing time in models that frequently callT_phX
. -
Added package
Buildings.Media.GasesConstantDensity
which contains medium models for dry air and moist air. The use of a constant density avoids having pressure as a state variable in mixing volumes. Hence, fast transients introduced by a change in pressure are avoided. The drawback is that the dimensionality of the coupled nonlinear equation system is typically larger for flow networks. -
In
Buildings.Fluid.Actuators.BaseClasses.PartialDamperExponential
, added default value for parameterA
to avoid compilation error if the parameter is disabled but not specified. -
Simplified the mixing volumes in
Buildings.Fluid.MixingVolumes
by removing the port velocity, pressure drop and height.
Extends from Modelica.Icons.ReleaseNotes (Icon for release notes in documentation).
Modelica definition
Buildings.UsersGuide.ReleaseNotes.Version_0_8_0
Version 0.8.0
Information
-
In
Buildings.Fluid.Interfaces.ConservationEquation
, added toMedium.BaseProperties
the initializationX(start=X_start[1:Medium.nX])
. Previously, the initialization was only done forXi
but not forX
, which caused the medium to be initialized toreference_X
, ignoring the value ofX_start
. -
Renamed
Buildings.Media.PerfectGases.MoistAirNonSaturated
toBuildings.Media.PerfectGases.MoistAirUnsaturated
andBuildings.Media.GasesPTDecoupled.MoistAirNoLiquid
toBuildings.Media.Air
, and addedassert
statements if saturation occurs. -
Added regularizaation near zero flow to
Buildings.Fluid.HeatExchangers.ConstantEffectiveness
andBuildings.Fluid.MassExchangers.ConstantEffectiveness
. -
Fixed bug regarding temperature offset in
Buildings.Media.PerfectGases.MoistAirUnsaturated.T_phX
. -
Added implementation of function
Buildings.Media.Air.enthalpyOfNonCondensingGas
and its derivative. -
In
Buildings.Media.PerfectGases.MoistAir
, fixed bug in implementation ofBuildings.Media.PerfectGases.MoistAir.T_phX
. In the previous version, it computed the inverse of its parent class, which gave slightly different results. -
In
Buildings.Utilities.IO.BCVTB.BCVTB
, added parameter to specify the value to be sent to the BCVTB at the first data exchange, and added parameter that deactivates the interface. Deactivating the interface is sometimes useful during debugging. -
In
Buildings.Media.GasesPTDecoupled.MoistAir
and inBuildings.Media.PerfectGases.MoistAir
, added functionenthalpyOfNonCondensingGas
and its derivative. -
In
Buildings.Media
, fixed bug in implementations of derivatives. -
Added model
Buildings.Fluid.Storage.ExpansionVessel
. -
Added Wrapper function
Buildings.Fluid.Movers.BaseClasses.Characteristics.solve
forModelica.Math.Matrices.solve
. This is currently needed sinceModelica.Math.Matrices.solve
does not specify a derivative. -
Fixed bug in
Buildings.Fluid.Storage.Stratified
. In the previous version, for computing the heat conduction between the top (or bottom) segment and the outside, the whole thickness of the water volume was used instead of only half the thickness. -
In
Buildings.Media.ConstantPropertyLiquidWater
, added the option to specify a compressibility. This can help reducing the size of the coupled nonlinear system of equations, at the expense of introducing stiffness. This change required to change the inheritance tree of the medium. Its base class is nowBuildings.Media.Interfaces.PartialSimpleMedium
, which contains the equation for the compressibility. The default setting will model the flow as incompressible. -
In
Buildings.Controls.Continuous.Examples.PIDHysteresis
andBuildings.Controls.Continuous.Examples.PIDHysteresisTimer
, fixed error in default parametereOn
. Fixed error by introducing parameterTd
, which used to be hard-wired in the PID controller. -
Added more models for fans and pumps to the package
Buildings.Fluid.Movers
. The models are similar to the ones inModelica.Fluid.Machines
but have been adapted for air-based systems, and to include more characteristic curves inBuildings.Fluid.Movers.BaseClasses.Characteristics
. The new models are better suited than the existing fan modelBuildings.Fluid.Movers.FlowMachinePolynomial
for zero flow rate. -
Added an optional mixing volume to
Buildings.Fluid.BaseClasses.PartialThreeWayResistance
and hence to the flow splitter and to the three-way valves. This often breaks algebraic loops and provides a state for the temperature if the mass flow rate goes to zero.
Extends from Modelica.Icons.ReleaseNotes (Icon for release notes in documentation).
Modelica definition
Buildings.UsersGuide.ReleaseNotes.Version_0_7_0
Version 0.7.0
Information
- Updated library from Modelica_Fluid to Modelica.Fluid 1.0
- Merged sensor and source models from Modelica.Fluid to Buildings.Fluid.
- Added sensor for sensible and latent enthalpy flow rate,
Buildings.Fluid.Sensors.SensibleEnthalpyFlowRate
andBuildings.Fluid.Sensors.LatentEnthalpyFlowRate
. These sensors are needed, for example, to interface air-conditioning systems that are modeled with Modelica with the Building Controls Virtual Test Bed.
Extends from Modelica.Icons.ReleaseNotes (Icon for release notes in documentation).
Modelica definition
Buildings.UsersGuide.ReleaseNotes.Version_0_6_0
Version 0.6.0
Information
-
Added the package
Buildings.Utilities.IO.BCVTB
which contains an interface to the Building Controls Virtual Test Bed. - Updated license to Modelica License 2.
-
Replaced
Buildings.Utilities.Psychrometrics.HumidityRatioPressure
byBuildings.Utilities.Psychrometrics.HumidityRatio_pWat
andBuildings.Utilities.Psychrometrics.VaporPressure_X
because the old model usedRealInput
ports, which are obsolete in Modelica 3.0. -
Changed the base class
Buildings.Fluid.Interfaces.StaticTwoPortHeatMassExchanger
to enable computation of pressure drop of mechanical equipment. -
Introduced package
Buildings.Fluid.BaseClasses.FlowModels
to model pressure drop, and rewroteBuildings.Fluid.BaseClasses.PartialResistance
. -
Redesigned package
Buildings.Utilities.Math
to allow having blocks and functions with the same name. Functions are now inBuildings.Utilities.Math.Functions
. -
Fixed sign error in
Buildings.Fluid.Storage.BaseClasses.Stratifier
which caused a wrong energy balance inBuildings.Fluid.Storage.StratifiedEnhanced
. -
Renamed
Buildings.Fluid.HeatExchangers.HeaterCoolerIdeal
toBuildings.Fluid.HeatExchangers.HeaterCoolerPrescribed
to have the same nomenclatures as is used forBuildings.Fluid.MassExchangers.HumidifierPrescribed
-
In
Buildings.Fluid/Actuators/BaseClasses/PartialDamperExponential
, added option to compute linearization near zero based on the fraction of nominal flow instead of the Reynolds number. This was set as the default, as it leads most reliably to a model parametrization that leads to a derivatived m_flow/d p
near the origin that is not too steep for a Newton-based solver. - In damper and VAV box models, added optional parameters to allow specifying the nominal face velocity instead of the area.
-
Set nominal attribute for pressure drop
dp
inBuildings.Fluid.BaseClasses.PartialResistance
and in its child classes. -
Added models for chiller
(
Buildings.Fluid.Chillers.Carnot
), for occupancy (Buildings.Controls.SetPoints.OccupancySchedule
) and for blocks that take a vector as an argument (Buildings.Utilities.Math.Min
,Buildings.Utilities.Math.Max
, andBuildings.Utilities.Math.Average
). - Changed various variable names to be consistent with naming convention used in Modelica.Fluid 1.0.
Extends from Modelica.Icons.ReleaseNotes (Icon for release notes in documentation).
Modelica definition
Buildings.UsersGuide.ReleaseNotes.Version_0_5_0
Version 0.5.0
Information
- Updated library to Modelica.Fluid 1.0.
-
Moved most examples from package
Buildings.Fluid.Examples
to the example directory in the package of the individual model. -
Renamed package
Buildings.Utilites.Controls
toBuildings.Utilites.Diagnostics
. -
Introduced packages
Buildings.Controls
,Buildings.HeatTransfer
(which contains models for heat transfer that generally does not involve modeling of the fluid flow),Buildings.Fluid.Boilers
andBuildings.Fluid.HeatExchangers.Radiators
. -
Changed valve models in
Buildings.Fluid.Actuators.Valves
so thatKv
orCv
can be used as the flow coefficient (in [m3/h] or [USG/min]).
Extends from Modelica.Icons.ReleaseNotes (Icon for release notes in documentation).
Modelica definition
Buildings.UsersGuide.ReleaseNotes.Version_0_4_0
Version 0.4.0
Information
-
Added package
Buildings.Fluid.Storage
with models for thermal energy storage. -
Added a steady-state model for a heat and moisture exchanger with
constant effectiveness.
See
Buildings.Fluid.MassExchangers.ConstantEffectiveness
-
Added package
Buildings.Utilities.Reports
. The package contains models that facilitate reporting.
Extends from Modelica.Icons.ReleaseNotes (Icon for release notes in documentation).
Modelica definition
Buildings.UsersGuide.ReleaseNotes.Version_0_3_0
Version 0.3.0
Information
-
Added package
Buildings.Fluid.Sources
. The package contains models for modeling species that do not affect the medium balance of volumes. This can be used to track for example carbon dioxide or other species that have a small concentration. -
The package
Buildings.Fluid.Actuators.Motors
has been added. The package contains a motor model for valves and dampers. -
The package
Buildings.Media
has been reorganized and the new medium modelBuildings.Media.GasesPTDecoupled.MoistAir
has been added.
In addition, this package now contains a bug fix that is needed for Modelica 2.2.1 and 2.2.2. The bugs are fixed by using a new base classBuildings.Media.Interfaces.PartialSimpleIdealGasMedium
(that fixes the bugs) instead ofModelica.Media.Interfaces.PartialSimpleIdealGasMedium
. In the original implementation, initial states of fluid volumes can be far away from the steady-state value because of an inconsistent implementation of the enthalpy and internal energy. When theBuildings
library is upgraded to to Modelica 3.0.0, it should be safe to remove this bug fix. -
The package
Buildings.Fluid.HeatExchangers
has been revised and several models have been renamed. The heat exchanger models have been revised to allow computing the fluid volumes either dynamically, or in steady-state. -
The damper with exponential opening characteristic has been revised to allow control signals
over the whole range between
0
and1
. This was in earlier versions restricted. In the same model, a bug was fixed that caused the flow to be largest fory=0
, i.e., when the damper is closed. - Additional models for psychrometric equations have been added. The new models contain equations that convert dew point temperature and water vapor pressure, as well as water vapor concentration and water vapor pressure.
- A new mixing volume has been added that allows latent heat exchange with the volume. This model can be used to model a volume of moist air with water vapor condensation inside the volume. The condensate is removed from the volume in its liquid phase.
Extends from Modelica.Icons.ReleaseNotes (Icon for release notes in documentation).
Modelica definition
Buildings.UsersGuide.ReleaseNotes.Version_0_2_0
Version 0.2.0
Information
New in this version are models for two and three way valves.
In addition, the Fluids
package has been slightly revised.
The package Fluid.BaseClasses
has been added because in
the previous version, partial models for fixed resistances
where part of the Actuator
package.
Extends from Modelica.Icons.ReleaseNotes (Icon for release notes in documentation).
Modelica definition
Buildings.UsersGuide.ReleaseNotes.Version_0_1_0
Version 0.1.0
Information
First release of the library.
This version contains basic models for modeling building HVAC systems.
It also contains new medium models in the package
Buildings.Media
. These medium models
have simpler property functions than the ones from
Modelica.Media
. For example,
there is medium model with constant heat capacity which is often sufficiently
accurate for building HVAC simulation, in contrast to the more detailed models
from Modelica.Media
that are valid in
a larger temperature range, at the expense of introducing non-linearities due
to the medium properties.
Extends from Modelica.Icons.ReleaseNotes (Icon for release notes in documentation).