Buildings.Controls.OBC.CDL.Routing

Package with blocks that combine and extract signals

Information

This package contains blocks to combine and extract signals.

Package Content

Name	Description
BooleanScalarReplicator	Boolean signal replicator
BooleanVectorFilter	Filter a boolean vector based on a boolean mask
BooleanVectorReplicator	Boolean vector signal replicator
IntegerScalarReplicator	Integer signal replicator
IntegerVectorFilter	Filter an integer vector based on a boolean mask
IntegerVectorReplicator	Integer vector signal replicator
RealExtractSignal	Extract signals from an input signal vector
RealExtractor	Extract scalar signal out of signal vector dependent on Integer input index
RealScalarReplicator	Real signal replicator
RealVectorFilter	Filter a real vector of based on a boolean mask
RealVectorReplicator	Real vector signal replicator
Validation	Collection of models that validate the routing blocks of the CDL

Buildings.Controls.OBC.CDL.Routing.BooleanScalarReplicator

Boolean signal replicator

Buildings.Controls.OBC.CDL.Routing.BooleanScalarReplicator

Information

This block replicates the Boolean input signal to an array of nout identical Boolean output signals.

Parameters

Type	Name	Default	Description
Integer	nout	1	Number of outputs

Connectors

Type	Name	Description
input BooleanInput	u	Connector of Boolean input signal
output BooleanOutput	y[nout]	Connector of Boolean output signals

Modelica definition

block BooleanScalarReplicator "Boolean signal replicator" parameter Integer nout=1 "Number of outputs"; Interfaces.BooleanInput u "Connector of Boolean input signal"; Interfaces.BooleanOutput y[nout] "Connector of Boolean output signals"; equation y=fill( u, nout); end BooleanScalarReplicator;

Buildings.Controls.OBC.CDL.Routing.BooleanVectorFilter

Filter a boolean vector based on a boolean mask

Buildings.Controls.OBC.CDL.Routing.BooleanVectorFilter

Information

This block filters a Boolean vector of size nin to a vector of size nout given a Boolean mask msk.

If an entry in msk is true, then the value of this input will be sent to the output y, otherwise it will be discarded.

The parameter msk must have exactly nout entries set to true, otherwise an error message is issued.

Parameters

Type	Name	Default	Description
Integer	nin		Size of input vector
Integer	nout		Size of output vector
Boolean	msk[nin]	fill(true, nin)	Array mask

Connectors

Type	Name	Description
input BooleanInput	u[nin]	Connector of Boolean input signal
output BooleanOutput	y[nout]	Connector of Boolean output signals

Modelica definition

block BooleanVectorFilter "Filter a boolean vector based on a boolean mask" parameter Integer nin "Size of input vector"; parameter Integer nout "Size of output vector"; parameter Boolean msk[nin]=fill(true,nin) "Array mask"; Interfaces.BooleanInput u[nin] "Connector of Boolean input signal"; Interfaces.BooleanOutput y[nout] "Connector of Boolean output signals"; protected parameter Integer mskId[nout] = Modelica.Math.BooleanVectors.index(msk) "Indices of included element in input vector"; initial equation assert(nout==sum({if msk[i] then 1 else 0 for i in 1:nin}), "In " + getInstanceName() + ": The size of the output vector does not match the size of included elements in the mask."); equation y = u[mskId]; end BooleanVectorFilter;

Buildings.Controls.OBC.CDL.Routing.BooleanVectorReplicator

Boolean vector signal replicator

Buildings.Controls.OBC.CDL.Routing.BooleanVectorReplicator

Information

This block replicates a Boolean vector input signal of size nin, to a matrix with nout rows and nin columns, where each row is duplicating the input vector.

Parameters

Type	Name	Default	Description
Integer	nin	1	Size of input vector
Integer	nout	1	Number of row in output

Connectors

Type	Name	Description
input BooleanInput	u[nin]	Connector of Boolean vector input signal
output BooleanOutput	y[nout, nin]	Connector of Boolean matrix output signals

Modelica definition

block BooleanVectorReplicator "Boolean vector signal replicator" parameter Integer nin=1 "Size of input vector"; parameter Integer nout=1 "Number of row in output"; Interfaces.BooleanInput u[nin] "Connector of Boolean vector input signal"; Interfaces.BooleanOutput y[nout, nin] "Connector of Boolean matrix output signals"; equation y=fill(u, nout); end BooleanVectorReplicator;

Buildings.Controls.OBC.CDL.Routing.IntegerScalarReplicator

Integer signal replicator

Buildings.Controls.OBC.CDL.Routing.IntegerScalarReplicator

Information

This block replicates the Integer input signal to an array of nout identical Integer output signals.

Parameters

Type	Name	Default	Description
Integer	nout	1	Number of outputs

Connectors

Type	Name	Description
input IntegerInput	u	Connector of Integer input signal
output IntegerOutput	y[nout]	Connector of Integer output signals

Modelica definition

block IntegerScalarReplicator "Integer signal replicator" parameter Integer nout=1 "Number of outputs"; Interfaces.IntegerInput u "Connector of Integer input signal"; Interfaces.IntegerOutput y[nout] "Connector of Integer output signals"; equation y=fill( u, nout); end IntegerScalarReplicator;

Buildings.Controls.OBC.CDL.Routing.IntegerVectorFilter

Filter an integer vector based on a boolean mask

Buildings.Controls.OBC.CDL.Routing.IntegerVectorFilter

Information

This block filters a Integer vector of size nin to a vector of size nout given a Boolean mask msk.

If an entry in msk is true, then the value of this input will be sent to the output y, otherwise it will be discarded.

The parameter msk must have exactly nout entries set to true, otherwise an error message is issued.

Parameters

Type	Name	Default	Description
Integer	nin		Size of input vector
Integer	nout		Size of output vector
Boolean	msk[nin]	fill(true, nin)	Array mask

Connectors

Type	Name	Description
input IntegerInput	u[nin]	Connector of Integer input signal
output IntegerOutput	y[nout]	Connector of Integer output signals

Modelica definition

block IntegerVectorFilter "Filter an integer vector based on a boolean mask" parameter Integer nin "Size of input vector"; parameter Integer nout "Size of output vector"; parameter Boolean msk[nin]=fill(true,nin) "Array mask"; Interfaces.IntegerInput u[nin] "Connector of Integer input signal"; Interfaces.IntegerOutput y[nout] "Connector of Integer output signals"; protected parameter Integer mskId[nout] = Modelica.Math.BooleanVectors.index(msk) "Indices of included element in input vector"; initial equation assert(nout==sum({if msk[i] then 1 else 0 for i in 1:nin}), "The size of the output vector does not match the size of included elements in the mask."); equation y = u[mskId]; end IntegerVectorFilter;

Buildings.Controls.OBC.CDL.Routing.IntegerVectorReplicator

Integer vector signal replicator

Buildings.Controls.OBC.CDL.Routing.IntegerVectorReplicator

Information

This block replicates an Integer vector input signal of size nin, to a matrix with nout rows and nin columns, where each row is duplicating the input vector.

Parameters

Type	Name	Default	Description
Integer	nin	1	Size of input vector
Integer	nout	1	Number of row in output

Connectors

Type	Name	Description
input IntegerInput	u[nin]	Connector of Integer vector input signal
output IntegerOutput	y[nout, nin]	Connector of Integer matrix output signals

Modelica definition

block IntegerVectorReplicator "Integer vector signal replicator" parameter Integer nin=1 "Size of input vector"; parameter Integer nout=1 "Number of row in output"; Interfaces.IntegerInput u[nin] "Connector of Integer vector input signal"; Interfaces.IntegerOutput y[nout, nin] "Connector of Integer matrix output signals"; equation y=fill(u, nout); end IntegerVectorReplicator;

Buildings.Controls.OBC.CDL.Routing.RealExtractSignal

Extract signals from an input signal vector

Buildings.Controls.OBC.CDL.Routing.RealExtractSignal

Information

Extract signals from the input connector and transfer them to the output connector.

The extracting scheme is given by the integer vector extract. This vector specifies which input signals are taken and in which order they are transferred to the output vector. Note that the dimension of extract has to match the number of outputs. Additionally, the dimensions of the input connector signals and the output connector signals have to be explicitly defined via the parameters nin and nout.

Example

The specification

     nin = 7 "Number of inputs";
     nout = 4 "Number of outputs";
     extract[nout] = {6,3,3,2} "Extracting vector";

extracts four output signals (nout=4) from the seven elements of the input vector (nin=7):

   output no. 1 is set equal to input no. 6
   output no. 2 is set equal to input no. 3
   output no. 3 is set equal to input no. 3
   output no. 4 is set equal to input no. 2

Parameters

Type	Name	Default	Description
Integer	nin	1	Number of inputs
Integer	nout	1	Number of outputs
Integer	extract[nout]	1:nout	Extracting vector

Connectors

Type	Name	Description
input RealInput	u[nin]	Connector of Real input signal
output RealOutput	y[nout]	Connector of Real output signal

Modelica definition

block RealExtractSignal "Extract signals from an input signal vector" parameter Integer nin=1 "Number of inputs"; parameter Integer nout=1 "Number of outputs"; parameter Integer extract[nout]=1:nout "Extracting vector"; Interfaces.RealInput u[nin] "Connector of Real input signal"; Interfaces.RealOutput y[nout] "Connector of Real output signal"; equation for i in 1:nout loop y[i]=u[extract[i]]; end for; end RealExtractSignal;

Buildings.Controls.OBC.CDL.Routing.RealExtractor

Extract scalar signal out of signal vector dependent on Integer input index

Buildings.Controls.OBC.CDL.Routing.RealExtractor

Information

Block that extracts a scalar output signal out the vector of input signals dependent on the Integer value of the input index:

    y = u [ index ] ;

where index is an additional Integer input signal.

Parameters

Type	Name	Default	Description
Boolean	allowOutOfRange	false	Index may be out of range
Integer	nin	1	Number of inputs
Real	outOfRangeValue	1e10	Output signal if index is out of range

Connectors

Type	Name	Description
input IntegerInput	index	Index of input vector element to be extracted out
input RealInput	u[nin]	Connector of Real input signals
output RealOutput	y	Connector of Real output signal

Modelica definition

block RealExtractor "Extract scalar signal out of signal vector dependent on Integer input index" parameter Boolean allowOutOfRange=false "Index may be out of range"; parameter Integer nin=1 "Number of inputs"; parameter Real outOfRangeValue=1e10 "Output signal if index is out of range"; Interfaces.IntegerInput index "Index of input vector element to be extracted out"; Interfaces.RealInput u[nin] "Connector of Real input signals"; Interfaces.RealOutput y "Connector of Real output signal"; protected Real k[nin] "Indicator used to extract the signal"; initial equation pre(index)=0; equation when {initial(),change(index)} then for i in 1:nin loop k[i]= if index == i then 1 else 0; end for; end when; y=if not allowOutOfRange or index > 0 and index <= nin then k*u else outOfRangeValue; end RealExtractor;

Buildings.Controls.OBC.CDL.Routing.RealScalarReplicator

Real signal replicator

Buildings.Controls.OBC.CDL.Routing.RealScalarReplicator

Information

This block replicates the Real input signal to an array of nout identical Real output signals.

Parameters

Type	Name	Default	Description
Integer	nout	1	Number of outputs

Connectors

Type	Name	Description
input RealInput	u	Connector of Real input signal
output RealOutput	y[nout]	Connector of Real output signal

Modelica definition

block RealScalarReplicator "Real signal replicator" parameter Integer nout=1 "Number of outputs"; Interfaces.RealInput u "Connector of Real input signal"; Interfaces.RealOutput y[nout] "Connector of Real output signal"; equation y=fill( u, nout); end RealScalarReplicator;

Buildings.Controls.OBC.CDL.Routing.RealVectorFilter

Filter a real vector of based on a boolean mask

Buildings.Controls.OBC.CDL.Routing.RealVectorFilter

Information

This block filters a Real vector of size nin to a vector of size nout given a boolean mask msk.

If an entry in msk is true, then the value of this input will be sent to the output y, otherwise it will be discarded.

The parameter msk must have exactly nout entries set to true, otherwise an error message is issued.

Parameters

Type	Name	Default	Description
Integer	nin		Size of input vector
Integer	nout		Size of output vector
Boolean	msk[nin]	fill(true, nin)	Array mask

Connectors

Type	Name	Description
input RealInput	u[nin]	Connector of Real input signal
output RealOutput	y[nout]	Connector of Real output signals

Modelica definition

block RealVectorFilter "Filter a real vector of based on a boolean mask" parameter Integer nin "Size of input vector"; parameter Integer nout "Size of output vector"; parameter Boolean msk[nin]=fill(true,nin) "Array mask"; Interfaces.RealInput u[nin] "Connector of Real input signal"; Interfaces.RealOutput y[nout] "Connector of Real output signals"; protected parameter Integer mskId[nout] = Modelica.Math.BooleanVectors.index(msk) "Indices of included element in input vector"; initial equation assert(nout==sum({if msk[i] then 1 else 0 for i in 1:nin}), "The size of the output vector does not match the size of included elements in the mask."); equation y = u[mskId]; end RealVectorFilter;

Buildings.Controls.OBC.CDL.Routing.RealVectorReplicator

Real vector signal replicator

Buildings.Controls.OBC.CDL.Routing.RealVectorReplicator

Information

This block replicates an Real vector input signal of size nin, to a matrix with nout rows and nin columns, where each row is duplicating the input vector.

Parameters

Type	Name	Default	Description
Integer	nin	1	Size of input vector
Integer	nout	1	Number of row in output

Connectors

Type	Name	Description
input RealInput	u[nin]	Connector of Real vector input signal
output RealOutput	y[nout, nin]	Connector of Real matrix output signals

Modelica definition

block RealVectorReplicator "Real vector signal replicator" parameter Integer nin=1 "Size of input vector"; parameter Integer nout=1 "Number of row in output"; Interfaces.RealInput u[nin] "Connector of Real vector input signal"; Interfaces.RealOutput y[nout, nin] "Connector of Real matrix output signals"; equation y=fill(u, nout); end RealVectorReplicator;