Buildings.Obsolete.Controls.OBC.CDL.Logical.Validation
Collection of models that validate the logical blocks of the CDL
Information
This package contains models that validate the blocks in Buildings.Controls.OBC.CDL.Logical.
The examples plot various outputs, which have been verified against analytical solutions. These model outputs are stored as reference data to allow continuous validation whenever models in the library change.
Package Content
| Name | Description |
|---|---|
 Timer
|
Validation model for the Timer block |
Buildings.Obsolete.Controls.OBC.CDL.Logical.Validation.Timer
Validation model for the Timer block
Information
Validation test for the block Buildings.Obsolete.Controls.OBC.CDL.Logical.Timer.
Modelica definition
model Timer "Validation model for the Timer block"
Buildings.Obsolete.Controls.OBC.CDL.Logical.Timer resetTimer(accumulate=false)
"Timer will reset";
Buildings.Obsolete.Controls.OBC.CDL.Logical.Timer accuTimer
"Reset timer based on boolean input";
Buildings.Obsolete.Controls.OBC.CDL.Logical.Timer accuTimer1
"Reset timer based on boolean input";
Buildings.Obsolete.Controls.OBC.CDL.Logical.Timer accuTimer2
"Reset timer based on boolean input";
Buildings.Obsolete.Controls.OBC.CDL.Logical.Timer accuTimer3
"Reset timer based on boolean input";
Buildings.Controls.OBC.CDL.Logical.Sources.Pulse booPul1(
final width=0.1,
final period=4)
"Block that outputs cyclic on and off";
Buildings.Controls.OBC.CDL.Continuous.GreaterThreshold greThr(final t=1.5)
"Output true when input is greater than threshold";
Buildings.Controls.OBC.CDL.Logical.Pre pre
"Returns the value of the input signal from the last event iteration";
Buildings.Controls.OBC.CDL.Logical.Sources.Pulse booPul(
final width=0.5,
final period=2) "Block that outputs cyclic on and off";
Buildings.Controls.OBC.CDL.Logical.Sources.Pulse booPul2(
final width=0.5,
final period=2,
final shift=0.5) "Block that outputs cyclic on and off";
Buildings.Controls.OBC.CDL.Logical.Sources.Constant con(
final k=false) "Block that outputs cyclic on and off";
equation
connect(booPul.y, resetTimer.u);
connect(booPul.y, accuTimer.u);
connect(booPul1.y, accuTimer.reset);
connect(booPul.y,accuTimer3. u);
connect(accuTimer3.y, greThr.u);
connect(greThr.y, pre.u);
connect(pre.y,accuTimer3. reset);
connect(booPul.y, accuTimer1.u);
connect(booPul.y, accuTimer1.reset);
connect(booPul.y, accuTimer2.reset);
connect(booPul2.y, accuTimer2.u);
connect(con.y, resetTimer.reset);
end Timer;