Buildings.Fluid.Chillers.Examples
Collection of models that illustrate model use and test models
Information
This package contains examples for the use of models that can be found in Buildings.Fluid.Chillers.
Extends from Modelica.Icons.ExamplesPackage (Icon for packages containing runnable examples).
Package Content
| Name | Description |
|---|---|
 AbsorptionIndirectSteam
|
Test model for absorption indirect steam chiller |
 AbsorptionIndirectSteamVaryingLoad
|
Absorption chiller with varying cooling load |
| Carnot_TEva
|
Test model for chiller based on Carnot efficiency and evaporator outlet temperature control signal |
| Carnot_y
|
Test model for chiller based on Carnot_y efficiency |
| ElectricEIR
|
Test model for chiller electric EIR |
| ElectricEIR_AirCooled
|
Test model for chiller electric EIR with air-cooled condenser |
| ElectricReformulatedEIR
|
Test model for chiller electric reformulated EIR |
 BaseClasses
|
Package with base classes for Buildings.Fluid.Chillers.Examples |
Buildings.Fluid.Chillers.Examples.AbsorptionIndirectSteam
Test model for absorption indirect steam chiller
Information
Example that simulates the absorption chiller Buildings.Fluid.Chillers.AbsorptionIndirectSteam for different inlet conditions.
Extends from Modelica.Icons.Example (Icon for runnable examples).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Generic | per | per(QEva_flow_nominal=-10000... | Chiller performance data |
Modelica definition
model AbsorptionIndirectSteam
"Test model for absorption indirect steam chiller"
extends Modelica.Icons.Example;
package Medium = Buildings.Media.Water
"Medium model";
parameter Buildings.Fluid.Chillers.Data.AbsorptionIndirectSteam.Generic per(
QEva_flow_nominal=-10000,
P_nominal=150,
PLRMax=1,
PLRMin=0.15,
mEva_flow_nominal=0.247,
mCon_flow_nominal=1.1,
dpEva_nominal=0,
dpCon_nominal=0,
capFunEva={0.690571,0.065571,-0.00289,0},
capFunCon={0.245507,0.023614,0.0000278,0.000013},
genHIR={0.18892,0.968044,1.119202,-0.5034},
EIRP={1,0,0},
genConT={0.712019,-0.00478,0.000864,-0.000013},
genEvaT={0.995571,0.046821,-0.01099,0.000608})
"Chiller performance data";
Buildings.Fluid.Chillers.AbsorptionIndirectSteam absIndSte(
redeclare package Medium1 = Medium,
redeclare package Medium2 = Medium,
show_T=true,
per=per,
energyDynamics=Modelica.Fluid.Types.Dynamics.FixedInitial)
"Absorption chiller";
Buildings.Fluid.Sources.MassFlowSource_T conPum(
redeclare package Medium = Medium,
use_m_flow_in=false,
m_flow=per.mCon_flow_nominal,
use_T_in=true,
nPorts=1)
"Condenser water pump";
Buildings.Fluid.Sources.MassFlowSource_T evaPum(
redeclare package Medium = Medium,
m_flow=per.mEva_flow_nominal,
use_T_in=true,
nPorts=1)
"Evaporator water pump";
Buildings.Controls.OBC.CDL.Continuous.Sources.Ramp TConEnt(
height=5,
duration(displayUnit="h") = 14400,
offset=20 + 273.15,
startTime=0)
"Condenser entering water temperature";
Buildings.Controls.OBC.CDL.Continuous.Sources.Ramp TEvaEnt(
height=4,
duration(displayUnit="h") = 14400,
offset=12 + 273.15,
startTime=0)
"Evaporator entering water temperature";
Buildings.Fluid.Sources.Boundary_pT heaVol(
redeclare package Medium = Medium,
nPorts=1)
"Volume for heating load";
Buildings.Fluid.Sources.Boundary_pT cooVol(
redeclare package Medium = Medium,
nPorts=1)
"Volume for cooling load";
Buildings.Controls.OBC.CDL.Continuous.Sources.Ramp TEvaSet(
height=4,
duration(displayUnit="h") = 14400,
offset=6 + 273.15,
startTime=0)
"Evaporator setpoint water temperature";
Modelica.Blocks.Sources.BooleanPulse onOff(period=3600/2) "Control input";
equation
connect(TConEnt.y,conPum. T_in);
connect(TEvaEnt.y,evaPum. T_in);
connect(absIndSte.port_a2, evaPum.ports[1]);
connect(absIndSte.TSet, TEvaSet.y);
connect(conPum.ports[1], absIndSte.port_a1);
connect(absIndSte.port_b1, heaVol.ports[1]);
connect(cooVol.ports[1], absIndSte.port_b2);
connect(onOff.y, absIndSte.on);
end AbsorptionIndirectSteam;
Buildings.Fluid.Chillers.Examples.AbsorptionIndirectSteamVaryingLoad
Absorption chiller with varying cooling load
Information
This model validates Buildings.Fluid.Chillers.AbsorptionIndirectSteam. for the case with varying cooling load.
The model is constructed in a way that the temperatures which determine the performance of the absorption chiller are kept constant in order to monitor the effects of the part load behavior on the ratio of the provided cooling to the required steam.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Generic | per | per(QEva_flow_nominal=-10000... | Chiller performance data |
Modelica definition
model AbsorptionIndirectSteamVaryingLoad
"Absorption chiller with varying cooling load"
package Medium = Buildings.Media.Water "Medium model";
parameter Data.AbsorptionIndirectSteam.Generic per(
QEva_flow_nominal=-10000,
P_nominal=150,
PLRMax=1,
PLRMin=0.15,
mEva_flow_nominal=0.247,
mCon_flow_nominal=1.1,
dpEva_nominal=0,
dpCon_nominal=0,
capFunEva={0.690571,0.065571,-0.00289,0},
capFunCon={0.245507,0.023614,0.0000278,0.000013},
genHIR={0.18892,0.968044,1.119202,-0.5034},
EIRP={1,0,0},
genConT={0.712019,-0.00478,0.000864,-0.000013},
genEvaT={0.995571,0.046821,-0.01099,0.000608})
"Chiller performance data";
Buildings.Fluid.Chillers.AbsorptionIndirectSteam chi(
redeclare package Medium1 = Medium,
redeclare package Medium2 = Medium,
per=per,
show_T=true,
energyDynamics=Modelica.Fluid.Types.Dynamics.SteadyState,
T1_start=25 + 273.15,
T2_start=10 + 273.15) "Absorption indirect chiller";
Buildings.Fluid.Sources.MassFlowSource_T conPum(
redeclare package Medium = Medium,
m_flow=per.mCon_flow_nominal,
T=273.15 + 30,
nPorts=1)
"Condenser water pump";
Buildings.Fluid.Sources.Boundary_pT bouCoo(
redeclare package Medium = Medium, nPorts=1)
"Boundary condition for cooling loop";
Buildings.Fluid.Sources.Boundary_pT heaBou(
redeclare package Medium = Medium,
nPorts=1) "Boundary condition for heating";
Controls.OBC.CDL.Logical.Sources.Constant on(k=true) "On signal";
Movers.FlowControlled_m_flow pum(
redeclare package Medium = Medium,
energyDynamics=Modelica.Fluid.Types.Dynamics.SteadyState,
m_flow_nominal=per.mEva_flow_nominal,
inputType=Buildings.Fluid.Types.InputType.Continuous,
nominalValuesDefineDefaultPressureCurve=true,
use_inputFilter=false) "Chilled water pump";
Sources.PropertySource_T proSou(
redeclare package Medium = Medium,
use_T_in=true) "Cooling load";
Controls.OBC.CDL.Continuous.Sources.Constant TSet(k=273.15 + 10) "Set point";
Controls.OBC.CDL.Continuous.Sources.Ramp mPum_flow(
height=per.mEva_flow_nominal,
duration=86400,
offset=0) "Pump flow rate";
Controls.OBC.CDL.Continuous.Division QEva_QGen
"Ratio of cooling provided over required steam";
Controls.OBC.CDL.Continuous.Division QEva_P
"Ratio of cooling provided over pump energy";
Controls.OBC.CDL.Continuous.Gain gai(k=-1) "Gain to switch sign";
Controls.OBC.CDL.Continuous.Sources.Constant TEnt(k=273.15 + 15)
"Entering evaporator temperature";
equation
connect(chi.on, on.y);
connect(conPum.ports[1], chi.port_a1);
connect(chi.port_b1, heaBou.ports[1]);
connect(bouCoo.ports[1], pum.port_a);
connect(proSou.port_a, pum.port_b);
connect(proSou.port_b, chi.port_a2);
connect(pum.port_a, chi.port_b2);
connect(TSet.y, chi.TSet);
connect(chi.QEva_flow, gai.u);
connect(QEva_P.u2, chi.P);
connect(QEva_QGen.u2, chi.QGen_flow);
connect(gai.y, QEva_P.u1);
connect(gai.y, QEva_QGen.u1);
connect(mPum_flow.y, pum.m_flow_in);
connect(TEnt.y, proSou.T_in);
end AbsorptionIndirectSteamVaryingLoad;
Buildings.Fluid.Chillers.Examples.Carnot_TEva
Test model for chiller based on Carnot efficiency and evaporator outlet temperature control signal
Information
Example that simulates a chiller whose efficiency is scaled based on the
Carnot cycle.
The chiller takes as an input the evaporator leaving water temperature.
The condenser mass flow rate is computed in such a way that it has
a temperature difference equal to dTEva_nominal.
Extends from Modelica.Icons.Example (Icon for runnable examples).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| TemperatureDifference | dTEva_nominal | -10 | Temperature difference evaporator outlet-inlet [K] |
| TemperatureDifference | dTCon_nominal | 10 | Temperature difference condenser outlet-inlet [K] |
| Real | COPc_nominal | 3 | Chiller COP |
| HeatFlowRate | QEva_flow_nominal | -100E3 | Evaporator heat flow rate [W] |
| MassFlowRate | m2_flow_nominal | QEva_flow_nominal/dTEva_nomi... | Nominal mass flow rate at chilled water side [kg/s] |
Modelica definition
model Carnot_TEva
"Test model for chiller based on Carnot efficiency and evaporator outlet temperature control signal"
extends Modelica.Icons.Example;
package Medium1 = Buildings.Media.Water "Medium model";
package Medium2 = Buildings.Media.Water "Medium model";
parameter Modelica.SIunits.TemperatureDifference dTEva_nominal=-10
"Temperature difference evaporator outlet-inlet";
parameter Modelica.SIunits.TemperatureDifference dTCon_nominal=10
"Temperature difference condenser outlet-inlet";
parameter Real COPc_nominal = 3 "Chiller COP";
parameter Modelica.SIunits.HeatFlowRate QEva_flow_nominal = -100E3
"Evaporator heat flow rate";
parameter Modelica.SIunits.MassFlowRate m2_flow_nominal=
QEva_flow_nominal/dTEva_nominal/4200
"Nominal mass flow rate at chilled water side";
Buildings.Fluid.Chillers.Carnot_TEva chi(
redeclare package Medium1 = Medium1,
redeclare package Medium2 = Medium2,
dTEva_nominal=dTEva_nominal,
dTCon_nominal=dTCon_nominal,
m2_flow_nominal=m2_flow_nominal,
show_T=true,
QEva_flow_nominal=QEva_flow_nominal,
allowFlowReversal1=false,
allowFlowReversal2=false,
use_eta_Carnot_nominal=true,
etaCarnot_nominal=0.3,
dp1_nominal=6000,
dp2_nominal=6000) "Chiller model";
Buildings.Fluid.Sources.MassFlowSource_T sou1(nPorts=1,
redeclare package Medium = Medium1,
use_T_in=false,
use_m_flow_in=true,
T=298.15);
Buildings.Fluid.Sources.MassFlowSource_T sou2(nPorts=1,
redeclare package Medium = Medium2,
m_flow=m2_flow_nominal,
use_T_in=false,
T=295.15);
Buildings.Fluid.Sources.Boundary_pT sin1(
redeclare package Medium = Medium1,
nPorts=1);
Buildings.Fluid.Sources.Boundary_pT sin2(nPorts=1,
redeclare package Medium = Medium2);
Modelica.Blocks.Sources.Ramp TEvaLvg(
duration=60,
startTime=1800,
offset=273.15 + 6,
height=10) "Control signal for evaporator leaving temperature";
Modelica.Blocks.Math.Gain mCon_flow(k=-1/cp1_default/dTEva_nominal)
"Condenser mass flow rate";
Modelica.Blocks.Math.Add QCon_flow(k2=-1) "Condenser heat flow rate";
final parameter Modelica.SIunits.SpecificHeatCapacity cp1_default=
Medium1.specificHeatCapacityCp(Medium1.setState_pTX(
Medium1.p_default,
Medium1.T_default,
Medium1.X_default))
"Specific heat capacity of medium 1 at default medium state";
equation
connect(sou1.ports[1], chi.port_a1);
connect(sou2.ports[1], chi.port_a2);
connect(sin2.ports[1], chi.port_b2);
connect(TEvaLvg.y, chi.TSet);
connect(chi.P, QCon_flow.u1);
connect(chi.QEva_flow, QCon_flow.u2);
connect(QCon_flow.y, mCon_flow.u);
connect(mCon_flow.y, sou1.m_flow_in);
connect(chi.port_b1, sin1.ports[1]);
end Carnot_TEva;
Buildings.Fluid.Chillers.Examples.Carnot_y
Test model for chiller based on Carnot_y efficiency
Information
Example that simulates a chiller whose efficiency is scaled based on the Carnot cycle. The chiller control signal is the compressor speed.
Extends from Modelica.Icons.Example (Icon for runnable examples).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Power | P_nominal | 10E3 | Nominal compressor power (at y=1) [W] |
| TemperatureDifference | dTEva_nominal | -10 | Temperature difference evaporator outlet-inlet [K] |
| TemperatureDifference | dTCon_nominal | 10 | Temperature difference condenser outlet-inlet [K] |
| Real | COPc_nominal | 3 | Chiller COP |
| MassFlowRate | m2_flow_nominal | -P_nominal*COPc_nominal/dTEv... | Nominal mass flow rate at chilled water side [kg/s] |
| MassFlowRate | m1_flow_nominal | m2_flow_nominal*(COPc_nomina... | Nominal mass flow rate at condenser water wide [kg/s] |
Modelica definition
model Carnot_y "Test model for chiller based on Carnot_y efficiency"
extends Modelica.Icons.Example;
package Medium1 = Buildings.Media.Water "Medium model";
package Medium2 = Buildings.Media.Water "Medium model";
parameter Modelica.SIunits.Power P_nominal=10E3
"Nominal compressor power (at y=1)";
parameter Modelica.SIunits.TemperatureDifference dTEva_nominal=-10
"Temperature difference evaporator outlet-inlet";
parameter Modelica.SIunits.TemperatureDifference dTCon_nominal=10
"Temperature difference condenser outlet-inlet";
parameter Real COPc_nominal = 3 "Chiller COP";
parameter Modelica.SIunits.MassFlowRate m2_flow_nominal=
-P_nominal*COPc_nominal/dTEva_nominal/4200
"Nominal mass flow rate at chilled water side";
parameter Modelica.SIunits.MassFlowRate m1_flow_nominal=
m2_flow_nominal*(COPc_nominal+1)/COPc_nominal
"Nominal mass flow rate at condenser water wide";
Buildings.Fluid.Chillers.Carnot_y chi(
redeclare package Medium1 = Medium1,
redeclare package Medium2 = Medium2,
P_nominal=P_nominal,
dTEva_nominal=dTEva_nominal,
dTCon_nominal=dTCon_nominal,
use_eta_Carnot_nominal=true,
etaCarnot_nominal=0.3,
dp1_nominal=6000,
dp2_nominal=6000,
energyDynamics=Modelica.Fluid.Types.Dynamics.FixedInitial,
show_T=true,
T1_start=303.15,
T2_start=278.15) "Chiller model";
Buildings.Fluid.Sources.MassFlowSource_T sou1(nPorts=1,
redeclare package Medium = Medium1,
use_T_in=true,
m_flow=m1_flow_nominal,
T=298.15);
Buildings.Fluid.Sources.MassFlowSource_T sou2(nPorts=1,
redeclare package Medium = Medium2,
use_T_in=true,
m_flow=m2_flow_nominal,
T=291.15);
Buildings.Fluid.Sources.Boundary_pT sin1(
nPorts=1,
redeclare package Medium = Medium1);
Buildings.Fluid.Sources.Boundary_pT sin2(
nPorts=1,
redeclare package Medium = Medium2);
Modelica.Blocks.Sources.Ramp uCom(
height=-1,
duration=60,
offset=1,
startTime=1800) "Compressor control signal";
Modelica.Blocks.Sources.Ramp TCon_in(
height=10,
duration=60,
offset=273.15 + 20,
startTime=60) "Condenser inlet temperature";
Modelica.Blocks.Sources.Ramp TEva_in(
height=10,
duration=60,
startTime=900,
offset=273.15 + 15) "Evaporator inlet temperature";
equation
connect(sou1.ports[1], chi.port_a1);
connect(sou2.ports[1], chi.port_a2);
connect(chi.port_b1, sin1.ports[1]);
connect(sin2.ports[1], chi.port_b2);
connect(TCon_in.y, sou1.T_in);
connect(TEva_in.y, sou2.T_in);
connect(uCom.y, chi.y);
end Carnot_y;
Buildings.Fluid.Chillers.Examples.ElectricEIR
Test model for chiller electric EIR
Information
Example that simulates a chiller whose efficiency is computed based on the condenser entering and evaporator leaving fluid temperature. A bicubic polynomial is used to compute the chiller part load performance.
Extends from Modelica.Icons.Example (Icon for runnable examples), Buildings.Fluid.Chillers.Examples.BaseClasses.PartialElectric (Base class for test model of chiller electric EIR).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Power | P_nominal | -per.QEva_flow_nominal/per.C... | Nominal compressor power (at y=1) [W] |
| TemperatureDifference | dTEva_nominal | 10 | Temperature difference evaporator inlet-outlet [K] |
| TemperatureDifference | dTCon_nominal | 10 | Temperature difference condenser outlet-inlet [K] |
| Real | COPc_nominal | 3 | Chiller COP |
| MassFlowRate | mEva_flow_nominal | per.mEva_flow_nominal | Nominal mass flow rate at evaporator [kg/s] |
| MassFlowRate | mCon_flow_nominal | per.mCon_flow_nominal | Nominal mass flow rate at condenser [kg/s] |
| ElectricEIRChiller_McQuay_WSC_471kW_5_89COP_Vanes | per | Chiller performance data |
Modelica definition
model ElectricEIR "Test model for chiller electric EIR"
extends Modelica.Icons.Example;
extends Buildings.Fluid.Chillers.Examples.BaseClasses.PartialElectric(
P_nominal=-per.QEva_flow_nominal/per.COP_nominal,
mEva_flow_nominal=per.mEva_flow_nominal,
mCon_flow_nominal=per.mCon_flow_nominal,
sou1(nPorts=1),
sou2(nPorts=1));
parameter Data.ElectricEIR.ElectricEIRChiller_McQuay_WSC_471kW_5_89COP_Vanes
per "Chiller performance data";
Buildings.Fluid.Chillers.ElectricEIR chi(
redeclare package Medium1 = Medium1,
redeclare package Medium2 = Medium2,
per=per,
energyDynamics=Modelica.Fluid.Types.Dynamics.FixedInitial,
dp1_nominal=6000,
dp2_nominal=6000) "Chiller model";
equation
connect(sou1.ports[1], chi.port_a1);
connect(chi.port_b1, res1.port_a);
connect(sou2.ports[1], chi.port_a2);
connect(chi.port_b2, res2.port_a);
connect(chi.on, greaterThreshold.y);
connect(chi.TSet, TSet.y);
end ElectricEIR;
Buildings.Fluid.Chillers.Examples.ElectricEIR_AirCooled
Test model for chiller electric EIR with air-cooled condenser
Information
Example that simulates a chiller whose efficiency is computed based on the condenser entering and evaporator leaving fluid temperature. A bicubic polynomial is used to compute the chiller part load performance. This example is for an air-cooled chiller.
Extends from Modelica.Icons.Example (Icon for runnable examples), Buildings.Fluid.Chillers.Examples.BaseClasses.PartialElectric_AirCooled (Base class for test model of chiller electric EIR with air-cooled condenser).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Power | P_nominal | -per.QEva_flow_nominal/per.C... | Nominal compressor power (at y=1) [W] |
| TemperatureDifference | dTEva_nominal | 10 | Temperature difference evaporator inlet-outlet [K] |
| TemperatureDifference | dTCon_nominal | 10 | Temperature difference condenser outlet-inlet [K] |
| Real | COPc_nominal | 3 | Chiller COP |
| MassFlowRate | mEva_flow_nominal | per.mEva_flow_nominal | Nominal mass flow rate at evaporator [kg/s] |
| MassFlowRate | mCon_flow_nominal | per.mCon_flow_nominal | Nominal mass flow rate at condenser [kg/s] |
| ElectricEIRChiller_York_YCAL0033EE_101kW_3_1COP_AirCooled | per | Chiller performance data |
Modelica definition
model ElectricEIR_AirCooled
"Test model for chiller electric EIR with air-cooled condenser"
extends Modelica.Icons.Example;
extends Buildings.Fluid.Chillers.Examples.BaseClasses.PartialElectric_AirCooled
( P_nominal=-per.QEva_flow_nominal/per.COP_nominal,
mEva_flow_nominal=per.mEva_flow_nominal,
mCon_flow_nominal=per.mCon_flow_nominal,
sou1(nPorts=1),
sou2(nPorts=1));
parameter Data.ElectricEIR.ElectricEIRChiller_York_YCAL0033EE_101kW_3_1COP_AirCooled
per "Chiller performance data";
Buildings.Fluid.Chillers.ElectricEIR chi(
redeclare package Medium1 = Medium1,
redeclare package Medium2 = Medium2,
per=per,
energyDynamics=Modelica.Fluid.Types.Dynamics.FixedInitial,
dp1_nominal=6000,
dp2_nominal=6000) "Chiller model";
equation
connect(sou1.ports[1], chi.port_a1);
connect(chi.port_b1, res1.port_a);
connect(sou2.ports[1], chi.port_a2);
connect(chi.port_b2, res2.port_a);
connect(chi.on, greaterThreshold.y);
connect(chi.TSet, TSet.y);
end ElectricEIR_AirCooled;
Buildings.Fluid.Chillers.Examples.ElectricReformulatedEIR
Test model for chiller electric reformulated EIR
Information
Example that simulates a chiller whose efficiency is computed based on the condenser leaving and evaporator leaving fluid temperature. A bicubic polynomial is used to compute the chiller part load performance.
Extends from Modelica.Icons.Example (Icon for runnable examples), Buildings.Fluid.Chillers.Examples.BaseClasses.PartialElectric (Base class for test model of chiller electric EIR).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Power | P_nominal | -per.QEva_flow_nominal/per.C... | Nominal compressor power (at y=1) [W] |
| TemperatureDifference | dTEva_nominal | 10 | Temperature difference evaporator inlet-outlet [K] |
| TemperatureDifference | dTCon_nominal | 10 | Temperature difference condenser outlet-inlet [K] |
| Real | COPc_nominal | 3 | Chiller COP |
| MassFlowRate | mEva_flow_nominal | per.mEva_flow_nominal | Nominal mass flow rate at evaporator [kg/s] |
| MassFlowRate | mCon_flow_nominal | per.mCon_flow_nominal | Nominal mass flow rate at condenser [kg/s] |
| ReformEIRChiller_McQuay_WSC_471kW_5_89COP_Vanes | per | Chiller performance data |
Modelica definition
model ElectricReformulatedEIR
"Test model for chiller electric reformulated EIR"
extends Modelica.Icons.Example;
extends Buildings.Fluid.Chillers.Examples.BaseClasses.PartialElectric(
P_nominal=-per.QEva_flow_nominal/per.COP_nominal,
mEva_flow_nominal=per.mEva_flow_nominal,
mCon_flow_nominal=per.mCon_flow_nominal,
sou1(nPorts=1),
sou2(nPorts=1));
parameter Data.ElectricReformulatedEIR.ReformEIRChiller_McQuay_WSC_471kW_5_89COP_Vanes
per "Chiller performance data";
Buildings.Fluid.Chillers.ElectricReformulatedEIR chi(
redeclare package Medium1 = Medium1,
redeclare package Medium2 = Medium2,
per=per,
energyDynamics=Modelica.Fluid.Types.Dynamics.FixedInitial,
dp1_nominal=6000,
dp2_nominal=6000) "Chiller model";
equation
connect(sou1.ports[1], chi.port_a1);
connect(chi.port_b1, res1.port_a);
connect(sou2.ports[1], chi.port_a2);
connect(chi.port_b2, res2.port_a);
connect(chi.on, greaterThreshold.y);
connect(TSet.y, chi.TSet);
end ElectricReformulatedEIR;