model VAVBranch "Validation for the VAVBranch class" extends Modelica.Icons.Example; package MediumA = Buildings.Media.Air "Medium model for air"; package MediumW = Buildings.Media.Water "Medium model for water"; Buildings.Obsolete.Examples.VAVReheat.BaseClasses.VAVBranch vavBra( redeclare package MediumA = MediumA, redeclare package MediumW = MediumW, terHea(show_T=true), m_flow_nominal=45, VRoo=275); Buildings.Fluid.Sources.Boundary_ph sinAir( redeclare package Medium = MediumA, p(displayUnit="Pa") = 1E5, nPorts=1) "Sink for terminal reheat box outlet air"; Modelica.Blocks.Sources.Ramp TSupAir( y(final unit="K", displayUnit="degC"), height=5, duration(displayUnit="h") = 3600, offset=285, startTime(displayUnit="h") = 3600) "Supply Air Temperature"; Modelica.Blocks.Sources.Ramp heaSig( height=1, duration(displayUnit="h") = 3600, offset=0, startTime(displayUnit="h") = 10800) "Signal to reheat coil valve"; Modelica.Blocks.Sources.Ramp damSig( height=0.4, duration(displayUnit="h") = 3600, offset=0.2, startTime(displayUnit="h") = 18000) "Signal to VAV Box Damper"; Buildings.Fluid.Sources.Boundary_pT bou( redeclare package Medium = MediumA, p(displayUnit="Pa") = 1E5 + 1500, use_T_in=true, nPorts=1); equation connect(vavBra.port_b, sinAir.ports[1]); connect(heaSig.y, vavBra.yVal); connect(damSig.y, vavBra.yVAV); connect(bou.ports[1], vavBra.port_a); connect(TSupAir.y, bou.T_in); end VAVBranch;