Buildings.Controls.OBC.UnitConversions.Validation
Collection of models that validate the unit conversion blocks of the CDL
Information
This package contains models that validate the blocks in Buildings.Controls.OBC.UnitConversions.
The examples plot various outputs, which have been verified against analytical solutions. These model outputs are stored as reference data to allow continuous validation whenever models in the library change.
Package Content
| Name | Description |
|---|---|
 From_Btu
|
Validation model for unit conversion from British thermal units to joule |
| From_BtuPerHour
|
Validation model for unit conversion from British thermal units per hour to watt |
| From_bar
|
Validation model for unit conversion from bar to pascal |
| From_cfm
|
Validation model for unit conversion from cubic feet per minute to cubic meters per second |
| From_degC
|
Validation model for unit conversion from degree Celsius to kelvin |
| From_degF
|
Validation model for unit conversion from degree Fahrenheit to kelvin |
| From_gal
|
Validation model for unit conversion from gallon to cubic meter |
| From_hp
|
Validation model for unit conversion from horsepower to watt |
| From_inH2O
|
Validation model for unit conversion from inch of water gauge (at 60 degF) to pascal |
| From_psi
|
Validation model for unit conversion from pound-force per square inch to pascal |
| From_quad
|
Validation model for unit conversion from quads to joule |
| From_ton
|
Validation model for unit conversion from ton of refrigeration to watt |
| To_Btu
|
Validation model for unit conversion from joule to British thermal units |
| To_BtuPerHour
|
Validation model for unit conversion from watt to British thermal units per hour |
| To_bar
|
Validation model for unit conversion from pascal to bar |
| To_cfm
|
Validation model for unit conversion from cubic meters per second to cubic feet per minute |
| To_degC
|
Validation model for unit conversion from kelvin to degree Celsius |
| To_degF
|
Validation model for unit conversion from kelvin to degree Fahrenheit |
| To_gal
|
Validation model for unit conversion from cubic meter to gallon |
| To_hp
|
Validation model for unit conversion from watt to horsepower |
| To_inH2O
|
Validation model for unit conversion from pascal to inch of water gauge (at 60 degF) |
| To_psi
|
Validation model for unit conversion from pascal to pound-force per square inch |
| To_quad
|
Validation model for unit conversion from joule to quads |
| To_ton
|
Validation model for unit conversion from watt to ton of refrigeration |
Buildings.Controls.OBC.UnitConversions.Validation.From_Btu
Validation model for unit conversion from British thermal units to joule
Information
This model validates energy unit conversion from British thermal units to joule.
Extends from Modelica.Icons.Example (Icon for runnable examples).
Modelica definition
model From_Btu "Validation model for unit conversion from British thermal units to joule"
extends Modelica.Icons.Example;
Buildings.Controls.OBC.CDL.Continuous.Add add(k2=-1)
"Difference between the calculated and expected conversion output";
Buildings.Controls.OBC.CDL.Continuous.Add add1(k2=-1)
"Difference between the calculated and expected conversion output";
protected
parameter Real kin = 1. "Validation input";
parameter Real kin1 = 2. "Validation input 1";
parameter Real kout = 1.*1055.056 "Validation output";
parameter Real kout1 = 2.*1055.056 "Validation output 1";
Buildings.Controls.OBC.UnitConversions.From_Btu from_Btu
"Unit converter from British thermal units to joule ";
Buildings.Controls.OBC.UnitConversions.From_Btu from_Btu1
"Unit converter from British thermal units to joule ";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant value(
final k=kin)
"Value to convert";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant value1(
final k=kin1)
"Value to convert";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant result(
final k=kout)
"Expected converted value";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant result1(
final k=kout1)
"Expected converted value";
equation
connect(result.y, add.u2);
connect(result1.y, add1.u2);
connect(value1.y,from_Btu1.u);
connect(from_Btu1.y, add1.u1);
connect(from_Btu.y, add.u1);
connect(value.y,from_Btu.u);
end From_Btu;
Buildings.Controls.OBC.UnitConversions.Validation.From_BtuPerHour
Validation model for unit conversion from British thermal units per hour to watt
Information
This model validates power unit conversion from British thermal units per hour to watt.
Extends from Modelica.Icons.Example (Icon for runnable examples).
Modelica definition
model From_BtuPerHour "Validation model for unit conversion from British thermal units per hour to watt"
extends Modelica.Icons.Example;
Buildings.Controls.OBC.CDL.Continuous.Add add(k2=-1)
"Difference between the calculated and expected conversion output";
Buildings.Controls.OBC.CDL.Continuous.Add add1(k2=-1)
"Difference between the calculated and expected conversion output";
protected
parameter Real kin = 1./0.2930711 "Validation input";
parameter Real kin1 = 1000./0.2930711 "Validation input 1";
parameter Real kout = 1 "Validation output";
parameter Real kout1 = 1000 "Validation output 1";
Buildings.Controls.OBC.UnitConversions.From_BtuPerHour from_BtuPerHour
"Unit converter from British thermal units per hour to watt ";
Buildings.Controls.OBC.UnitConversions.From_BtuPerHour from_BtuPerHour1
"Unit converter from British thermal units per hour to watt ";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant value(
final k=kin)
"Value to convert";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant value1(
final k=kin1)
"Value to convert";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant result(
final k=kout)
"Expected converted value";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant result1(
final k=kout1)
"Expected converted value";
equation
connect(result.y, add.u2);
connect(result1.y, add1.u2);
connect(value1.y,from_BtuPerHour1.u);
connect(from_BtuPerHour1.y, add1.u1);
connect(from_BtuPerHour.y, add.u1);
connect(value.y,from_BtuPerHour.u);
end From_BtuPerHour;
Buildings.Controls.OBC.UnitConversions.Validation.From_bar
Validation model for unit conversion from bar to pascal
Information
This model validates pressure unit conversion from bar to pascal.
Extends from Modelica.Icons.Example (Icon for runnable examples).
Modelica definition
model From_bar "Validation model for unit conversion from bar to pascal"
extends Modelica.Icons.Example;
Buildings.Controls.OBC.CDL.Continuous.Add add(k2=-1)
"Difference between the calculated and expected conversion output";
Buildings.Controls.OBC.CDL.Continuous.Add add1(k2=-1)
"Difference between the calculated and expected conversion output";
protected
parameter Real kin = 1. "Validation input";
parameter Real kin1 = 0.00025 "Validation input 1";
parameter Real kout = 1.*100000. "Validation output";
parameter Real kout1 = 0.00025*100000. "Validation output 1";
Buildings.Controls.OBC.UnitConversions.From_bar from_bar
"Unit converter from bar to pascal ";
Buildings.Controls.OBC.UnitConversions.From_bar from_bar1
"Unit converter from bar to pascal ";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant value(
final k=kin)
"Value to convert";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant value1(
final k=kin1)
"Value to convert";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant result(
final k=kout)
"Expected converted value";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant result1(
final k=kout1)
"Expected converted value";
equation
connect(result.y, add.u2);
connect(result1.y, add1.u2);
connect(value1.y,from_bar1.u);
connect(from_bar1.y, add1.u1);
connect(from_bar.y, add.u1);
connect(value.y,from_bar.u);
end From_bar;
Buildings.Controls.OBC.UnitConversions.Validation.From_cfm
Validation model for unit conversion from cubic feet per minute to cubic meters per second
Information
This model validates volume flow unit conversion from cubic feet per minute to cubic meters per second.
Extends from Modelica.Icons.Example (Icon for runnable examples).
Modelica definition
model From_cfm "Validation model for unit conversion from cubic feet per minute to cubic meters per second"
extends Modelica.Icons.Example;
Buildings.Controls.OBC.CDL.Continuous.Add add(k2=-1)
"Difference between the calculated and expected conversion output";
Buildings.Controls.OBC.CDL.Continuous.Add add1(k2=-1)
"Difference between the calculated and expected conversion output";
protected
parameter Real kin = 100. "Validation input";
parameter Real kin1 = 2000. "Validation input 1";
parameter Real kout = 100.*0.000471947 "Validation output";
parameter Real kout1 = 2000.*0.000471947 "Validation output 1";
Buildings.Controls.OBC.UnitConversions.From_cfm from_cfm
"Unit converter from cubic feet per minute to cubic meters per second ";
Buildings.Controls.OBC.UnitConversions.From_cfm from_cfm1
"Unit converter from cubic feet per minute to cubic meters per second ";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant value(
final k=kin)
"Value to convert";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant value1(
final k=kin1)
"Value to convert";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant result(
final k=kout)
"Expected converted value";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant result1(
final k=kout1)
"Expected converted value";
equation
connect(result.y, add.u2);
connect(result1.y, add1.u2);
connect(value1.y,from_cfm1.u);
connect(from_cfm1.y, add1.u1);
connect(from_cfm.y, add.u1);
connect(value.y,from_cfm.u);
end From_cfm;
Buildings.Controls.OBC.UnitConversions.Validation.From_degC
Validation model for unit conversion from degree Celsius to kelvin
Information
This model validates temperature unit conversion from degree Celsius to kelvin.
Extends from Modelica.Icons.Example (Icon for runnable examples).
Modelica definition
model From_degC "Validation model for unit conversion from degree Celsius to kelvin"
extends Modelica.Icons.Example;
Buildings.Controls.OBC.CDL.Continuous.Add add(k2=-1)
"Difference between the calculated and expected conversion output";
Buildings.Controls.OBC.CDL.Continuous.Add add1(k2=-1)
"Difference between the calculated and expected conversion output";
protected
parameter Real kin = 0. "Validation input";
parameter Real kin1 = 100. "Validation input 1";
parameter Real kout = 273.15 "Validation output";
parameter Real kout1 = 373.15 "Validation output 1";
Buildings.Controls.OBC.UnitConversions.From_degC from_degC
"Unit converter from degree Celsius to kelvin ";
Buildings.Controls.OBC.UnitConversions.From_degC from_degC1
"Unit converter from degree Celsius to kelvin ";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant value(
final k=kin)
"Value to convert";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant value1(
final k=kin1)
"Value to convert";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant result(
final k=kout)
"Expected converted value";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant result1(
final k=kout1)
"Expected converted value";
equation
connect(result.y, add.u2);
connect(result1.y, add1.u2);
connect(value1.y,from_degC1.u);
connect(from_degC1.y, add1.u1);
connect(from_degC.y, add.u1);
connect(value.y,from_degC.u);
end From_degC;
Buildings.Controls.OBC.UnitConversions.Validation.From_degF
Validation model for unit conversion from degree Fahrenheit to kelvin
Information
This model validates temperature unit conversion from degree Fahrenheit to kelvin.
Extends from Modelica.Icons.Example (Icon for runnable examples).
Modelica definition
model From_degF "Validation model for unit conversion from degree Fahrenheit to kelvin"
extends Modelica.Icons.Example;
Buildings.Controls.OBC.CDL.Continuous.Add add(k2=-1)
"Difference between the calculated and expected conversion output";
Buildings.Controls.OBC.CDL.Continuous.Add add1(k2=-1)
"Difference between the calculated and expected conversion output";
protected
parameter Real kin = 32. "Validation input";
parameter Real kin1 = 100. * (9./5.) + 32. "Validation input 1";
parameter Real kout = 273.15 "Validation output";
parameter Real kout1 = 373.15 "Validation output 1";
Buildings.Controls.OBC.UnitConversions.From_degF from_degF
"Unit converter from degree Fahrenheit to kelvin ";
Buildings.Controls.OBC.UnitConversions.From_degF from_degF1
"Unit converter from degree Fahrenheit to kelvin ";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant value(
final k=kin)
"Value to convert";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant value1(
final k=kin1)
"Value to convert";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant result(
final k=kout)
"Expected converted value";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant result1(
final k=kout1)
"Expected converted value";
equation
connect(result.y, add.u2);
connect(result1.y, add1.u2);
connect(value1.y,from_degF1.u);
connect(from_degF1.y, add1.u1);
connect(from_degF.y, add.u1);
connect(value.y,from_degF.u);
end From_degF;
Buildings.Controls.OBC.UnitConversions.Validation.From_gal
Validation model for unit conversion from gallon to cubic meter
Information
This model validates volume unit conversion from gallon to cubic meter.
Extends from Modelica.Icons.Example (Icon for runnable examples).
Modelica definition
model From_gal "Validation model for unit conversion from gallon to cubic meter"
extends Modelica.Icons.Example;
Buildings.Controls.OBC.CDL.Continuous.Add add(k2=-1)
"Difference between the calculated and expected conversion output";
Buildings.Controls.OBC.CDL.Continuous.Add add1(k2=-1)
"Difference between the calculated and expected conversion output";
protected
parameter Real kin = 1. "Validation input";
parameter Real kin1 = 100. "Validation input 1";
parameter Real kout = 1.*0.003785412 "Validation output";
parameter Real kout1 = 100.*0.003785412 "Validation output 1";
Buildings.Controls.OBC.UnitConversions.From_gal from_gal
"Unit converter from gallon to cubic meter ";
Buildings.Controls.OBC.UnitConversions.From_gal from_gal1
"Unit converter from gallon to cubic meter ";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant value(
final k=kin)
"Value to convert";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant value1(
final k=kin1)
"Value to convert";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant result(
final k=kout)
"Expected converted value";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant result1(
final k=kout1)
"Expected converted value";
equation
connect(result.y, add.u2);
connect(result1.y, add1.u2);
connect(value1.y,from_gal1.u);
connect(from_gal1.y, add1.u1);
connect(from_gal.y, add.u1);
connect(value.y,from_gal.u);
end From_gal;
Buildings.Controls.OBC.UnitConversions.Validation.From_hp
Validation model for unit conversion from horsepower to watt
Information
This model validates power unit conversion from horsepower to watt.
Extends from Modelica.Icons.Example (Icon for runnable examples).
Modelica definition
model From_hp "Validation model for unit conversion from horsepower to watt"
extends Modelica.Icons.Example;
Buildings.Controls.OBC.CDL.Continuous.Add add(k2=-1)
"Difference between the calculated and expected conversion output";
Buildings.Controls.OBC.CDL.Continuous.Add add1(k2=-1)
"Difference between the calculated and expected conversion output";
protected
parameter Real kin = 10. "Validation input";
parameter Real kin1 = 45. "Validation input 1";
parameter Real kout = 10.*0.7457 "Validation output";
parameter Real kout1 = 45.*0.7457 "Validation output 1";
Buildings.Controls.OBC.UnitConversions.From_hp from_hp
"Unit converter from horsepower to watt ";
Buildings.Controls.OBC.UnitConversions.From_hp from_hp1
"Unit converter from horsepower to watt ";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant value(
final k=kin)
"Value to convert";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant value1(
final k=kin1)
"Value to convert";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant result(
final k=kout)
"Expected converted value";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant result1(
final k=kout1)
"Expected converted value";
equation
connect(result.y, add.u2);
connect(result1.y, add1.u2);
connect(value1.y,from_hp1.u);
connect(from_hp1.y, add1.u1);
connect(from_hp.y, add.u1);
connect(value.y,from_hp.u);
end From_hp;
Buildings.Controls.OBC.UnitConversions.Validation.From_inH2O
Validation model for unit conversion from inch of water gauge (at 60 degF) to pascal
Information
This model validates pressure unit conversion from inch of water gauge (at 60 degF) to pascal.
Extends from Modelica.Icons.Example (Icon for runnable examples).
Modelica definition
model From_inH2O "Validation model for unit conversion from inch of water gauge (at 60 degF) to pascal"
extends Modelica.Icons.Example;
Buildings.Controls.OBC.CDL.Continuous.Add add(k2=-1)
"Difference between the calculated and expected conversion output";
Buildings.Controls.OBC.CDL.Continuous.Add add1(k2=-1)
"Difference between the calculated and expected conversion output";
protected
parameter Real kin = 25./248.84 "Validation input";
parameter Real kin1 = 100000./248.84 "Validation input 1";
parameter Real kout = 25 "Validation output";
parameter Real kout1 = 100000 "Validation output 1";
Buildings.Controls.OBC.UnitConversions.From_inH2O from_inH2O
"Unit converter from inch of water gauge (at 60 degF) to pascal ";
Buildings.Controls.OBC.UnitConversions.From_inH2O from_inH2O1
"Unit converter from inch of water gauge (at 60 degF) to pascal ";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant value(
final k=kin)
"Value to convert";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant value1(
final k=kin1)
"Value to convert";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant result(
final k=kout)
"Expected converted value";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant result1(
final k=kout1)
"Expected converted value";
equation
connect(result.y, add.u2);
connect(result1.y, add1.u2);
connect(value1.y,from_inH2O1.u);
connect(from_inH2O1.y, add1.u1);
connect(from_inH2O.y, add.u1);
connect(value.y,from_inH2O.u);
end From_inH2O;
Buildings.Controls.OBC.UnitConversions.Validation.From_psi
Validation model for unit conversion from pound-force per square inch to pascal
Information
This model validates pressure unit conversion from pound-force per square inch to pascal.
Extends from Modelica.Icons.Example (Icon for runnable examples).
Modelica definition
model From_psi "Validation model for unit conversion from pound-force per square inch to pascal"
extends Modelica.Icons.Example;
Buildings.Controls.OBC.CDL.Continuous.Add add(k2=-1)
"Difference between the calculated and expected conversion output";
Buildings.Controls.OBC.CDL.Continuous.Add add1(k2=-1)
"Difference between the calculated and expected conversion output";
protected
parameter Real kin = 0.0036 "Validation input";
parameter Real kin1 = 1. "Validation input 1";
parameter Real kout = 0.0036*6895. "Validation output";
parameter Real kout1 = 1.*6895. "Validation output 1";
Buildings.Controls.OBC.UnitConversions.From_psi from_psi
"Unit converter from pound-force per square inch to pascal ";
Buildings.Controls.OBC.UnitConversions.From_psi from_psi1
"Unit converter from pound-force per square inch to pascal ";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant value(
final k=kin)
"Value to convert";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant value1(
final k=kin1)
"Value to convert";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant result(
final k=kout)
"Expected converted value";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant result1(
final k=kout1)
"Expected converted value";
equation
connect(result.y, add.u2);
connect(result1.y, add1.u2);
connect(value1.y,from_psi1.u);
connect(from_psi1.y, add1.u1);
connect(from_psi.y, add.u1);
connect(value.y,from_psi.u);
end From_psi;
Buildings.Controls.OBC.UnitConversions.Validation.From_quad
Validation model for unit conversion from quads to joule
Information
This model validates energy unit conversion from quads to joule.
Extends from Modelica.Icons.Example (Icon for runnable examples).
Modelica definition
model From_quad "Validation model for unit conversion from quads to joule"
extends Modelica.Icons.Example;
Buildings.Controls.OBC.CDL.Continuous.Add add(k2=-1)
"Difference between the calculated and expected conversion output";
Buildings.Controls.OBC.CDL.Continuous.Add add1(k2=-1)
"Difference between the calculated and expected conversion output";
protected
parameter Real kin = 1. "Validation input";
parameter Real kin1 = 2. "Validation input 1";
parameter Real kout = 1.*1055.56e15 "Validation output";
parameter Real kout1 = 2.*1055.56e15 "Validation output 1";
Buildings.Controls.OBC.UnitConversions.From_quad from_quad
"Unit converter from quads to joule ";
Buildings.Controls.OBC.UnitConversions.From_quad from_quad1
"Unit converter from quads to joule ";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant value(
final k=kin)
"Value to convert";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant value1(
final k=kin1)
"Value to convert";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant result(
final k=kout)
"Expected converted value";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant result1(
final k=kout1)
"Expected converted value";
equation
connect(result.y, add.u2);
connect(result1.y, add1.u2);
connect(value1.y,from_quad1.u);
connect(from_quad1.y, add1.u1);
connect(from_quad.y, add.u1);
connect(value.y,from_quad.u);
end From_quad;
Buildings.Controls.OBC.UnitConversions.Validation.From_ton
Validation model for unit conversion from ton of refrigeration to watt
Information
This model validates power unit conversion from ton of refrigeration to watt.
Extends from Modelica.Icons.Example (Icon for runnable examples).
Modelica definition
model From_ton "Validation model for unit conversion from ton of refrigeration to watt"
extends Modelica.Icons.Example;
Buildings.Controls.OBC.CDL.Continuous.Add add(k2=-1)
"Difference between the calculated and expected conversion output";
Buildings.Controls.OBC.CDL.Continuous.Add add1(k2=-1)
"Difference between the calculated and expected conversion output";
protected
parameter Real kin = 1. "Validation input";
parameter Real kin1 = 100. "Validation input 1";
parameter Real kout = 3517. "Validation output";
parameter Real kout1 = 351700. "Validation output 1";
Buildings.Controls.OBC.UnitConversions.From_ton from_ton
"Unit converter from ton of refrigeration to watt ";
Buildings.Controls.OBC.UnitConversions.From_ton from_ton1
"Unit converter from ton of refrigeration to watt ";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant value(
final k=kin)
"Value to convert";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant value1(
final k=kin1)
"Value to convert";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant result(
final k=kout)
"Expected converted value";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant result1(
final k=kout1)
"Expected converted value";
equation
connect(result.y, add.u2);
connect(result1.y, add1.u2);
connect(value1.y,from_ton1.u);
connect(from_ton1.y, add1.u1);
connect(from_ton.y, add.u1);
connect(value.y,from_ton.u);
end From_ton;
Buildings.Controls.OBC.UnitConversions.Validation.To_Btu
Validation model for unit conversion from joule to British thermal units
Information
This model validates energy unit conversion from joule to British thermal units.
Extends from Modelica.Icons.Example (Icon for runnable examples).
Modelica definition
model To_Btu "Validation model for unit conversion from joule to British thermal units"
extends Modelica.Icons.Example;
Buildings.Controls.OBC.CDL.Continuous.Add add(k2=-1)
"Difference between the calculated and expected conversion output";
Buildings.Controls.OBC.CDL.Continuous.Add add1(k2=-1)
"Difference between the calculated and expected conversion output";
protected
parameter Real kin = 1.*1055.056 "Validation input";
parameter Real kin1 = 2.*1055.056 "Validation input 1";
parameter Real kout = 1. "Validation output";
parameter Real kout1 = 2. "Validation output 1";
Buildings.Controls.OBC.UnitConversions.To_Btu to_Btu
"Unit converter from joule to British thermal units ";
Buildings.Controls.OBC.UnitConversions.To_Btu to_Btu1
"Unit converter from joule to British thermal units ";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant value(
final k=kin)
"Value to convert";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant value1(
final k=kin1)
"Value to convert";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant result(
final k=kout)
"Expected converted value";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant result1(
final k=kout1)
"Expected converted value";
equation
connect(result.y, add.u2);
connect(result1.y, add1.u2);
connect(value1.y,to_Btu1.u);
connect(to_Btu1.y, add1.u1);
connect(to_Btu.y, add.u1);
connect(value.y,to_Btu.u);
end To_Btu;
Buildings.Controls.OBC.UnitConversions.Validation.To_BtuPerHour
Validation model for unit conversion from watt to British thermal units per hour
Information
This model validates power unit conversion from watt to British thermal units per hour.
Extends from Modelica.Icons.Example (Icon for runnable examples).
Modelica definition
model To_BtuPerHour "Validation model for unit conversion from watt to British thermal units per hour"
extends Modelica.Icons.Example;
Buildings.Controls.OBC.CDL.Continuous.Add add(k2=-1)
"Difference between the calculated and expected conversion output";
Buildings.Controls.OBC.CDL.Continuous.Add add1(k2=-1)
"Difference between the calculated and expected conversion output";
protected
parameter Real kin = 1 "Validation input";
parameter Real kin1 = 1000 "Validation input 1";
parameter Real kout = 1./0.2930711 "Validation output";
parameter Real kout1 = 1000./0.2930711 "Validation output 1";
Buildings.Controls.OBC.UnitConversions.To_BtuPerHour to_BtuPerHour
"Unit converter from watt to British thermal units per hour ";
Buildings.Controls.OBC.UnitConversions.To_BtuPerHour to_BtuPerHour1
"Unit converter from watt to British thermal units per hour ";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant value(
final k=kin)
"Value to convert";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant value1(
final k=kin1)
"Value to convert";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant result(
final k=kout)
"Expected converted value";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant result1(
final k=kout1)
"Expected converted value";
equation
connect(result.y, add.u2);
connect(result1.y, add1.u2);
connect(value1.y,to_BtuPerHour1.u);
connect(to_BtuPerHour1.y, add1.u1);
connect(to_BtuPerHour.y, add.u1);
connect(value.y,to_BtuPerHour.u);
end To_BtuPerHour;
Buildings.Controls.OBC.UnitConversions.Validation.To_bar
Validation model for unit conversion from pascal to bar
Information
This model validates pressure unit conversion from pascal to bar.
Extends from Modelica.Icons.Example (Icon for runnable examples).
Modelica definition
model To_bar "Validation model for unit conversion from pascal to bar"
extends Modelica.Icons.Example;
Buildings.Controls.OBC.CDL.Continuous.Add add(k2=-1)
"Difference between the calculated and expected conversion output";
Buildings.Controls.OBC.CDL.Continuous.Add add1(k2=-1)
"Difference between the calculated and expected conversion output";
protected
parameter Real kin = 1.*100000. "Validation input";
parameter Real kin1 = 0.00025*100000. "Validation input 1";
parameter Real kout = 1. "Validation output";
parameter Real kout1 = 0.00025 "Validation output 1";
Buildings.Controls.OBC.UnitConversions.To_bar to_bar
"Unit converter from pascal to bar ";
Buildings.Controls.OBC.UnitConversions.To_bar to_bar1
"Unit converter from pascal to bar ";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant value(
final k=kin)
"Value to convert";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant value1(
final k=kin1)
"Value to convert";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant result(
final k=kout)
"Expected converted value";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant result1(
final k=kout1)
"Expected converted value";
equation
connect(result.y, add.u2);
connect(result1.y, add1.u2);
connect(value1.y,to_bar1.u);
connect(to_bar1.y, add1.u1);
connect(to_bar.y, add.u1);
connect(value.y,to_bar.u);
end To_bar;
Buildings.Controls.OBC.UnitConversions.Validation.To_cfm
Validation model for unit conversion from cubic meters per second to cubic feet per minute
Information
This model validates volume flow unit conversion from cubic meters per second to cubic feet per minute.
Extends from Modelica.Icons.Example (Icon for runnable examples).
Modelica definition
model To_cfm "Validation model for unit conversion from cubic meters per second to cubic feet per minute"
extends Modelica.Icons.Example;
Buildings.Controls.OBC.CDL.Continuous.Add add(k2=-1)
"Difference between the calculated and expected conversion output";
Buildings.Controls.OBC.CDL.Continuous.Add add1(k2=-1)
"Difference between the calculated and expected conversion output";
protected
parameter Real kin = 100.*0.000471947 "Validation input";
parameter Real kin1 = 2000.*0.000471947 "Validation input 1";
parameter Real kout = 100. "Validation output";
parameter Real kout1 = 2000. "Validation output 1";
Buildings.Controls.OBC.UnitConversions.To_cfm to_cfm
"Unit converter from cubic meters per second to cubic feet per minute ";
Buildings.Controls.OBC.UnitConversions.To_cfm to_cfm1
"Unit converter from cubic meters per second to cubic feet per minute ";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant value(
final k=kin)
"Value to convert";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant value1(
final k=kin1)
"Value to convert";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant result(
final k=kout)
"Expected converted value";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant result1(
final k=kout1)
"Expected converted value";
equation
connect(result.y, add.u2);
connect(result1.y, add1.u2);
connect(value1.y,to_cfm1.u);
connect(to_cfm1.y, add1.u1);
connect(to_cfm.y, add.u1);
connect(value.y,to_cfm.u);
end To_cfm;
Buildings.Controls.OBC.UnitConversions.Validation.To_degC
Validation model for unit conversion from kelvin to degree Celsius
Information
This model validates temperature unit conversion from kelvin to degree Celsius.
Extends from Modelica.Icons.Example (Icon for runnable examples).
Modelica definition
model To_degC "Validation model for unit conversion from kelvin to degree Celsius"
extends Modelica.Icons.Example;
Buildings.Controls.OBC.CDL.Continuous.Add add(k2=-1)
"Difference between the calculated and expected conversion output";
Buildings.Controls.OBC.CDL.Continuous.Add add1(k2=-1)
"Difference between the calculated and expected conversion output";
protected
parameter Real kin = 273.15 "Validation input";
parameter Real kin1 = 373.15 "Validation input 1";
parameter Real kout = 0. "Validation output";
parameter Real kout1 = 100. "Validation output 1";
Buildings.Controls.OBC.UnitConversions.To_degC to_degC
"Unit converter from kelvin to degree Celsius ";
Buildings.Controls.OBC.UnitConversions.To_degC to_degC1
"Unit converter from kelvin to degree Celsius ";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant value(
final k=kin)
"Value to convert";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant value1(
final k=kin1)
"Value to convert";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant result(
final k=kout)
"Expected converted value";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant result1(
final k=kout1)
"Expected converted value";
equation
connect(result.y, add.u2);
connect(result1.y, add1.u2);
connect(value1.y,to_degC1.u);
connect(to_degC1.y, add1.u1);
connect(to_degC.y, add.u1);
connect(value.y,to_degC.u);
end To_degC;
Buildings.Controls.OBC.UnitConversions.Validation.To_degF
Validation model for unit conversion from kelvin to degree Fahrenheit
Information
This model validates temperature unit conversion from kelvin to degree Fahrenheit.
Extends from Modelica.Icons.Example (Icon for runnable examples).
Modelica definition
model To_degF "Validation model for unit conversion from kelvin to degree Fahrenheit"
extends Modelica.Icons.Example;
Buildings.Controls.OBC.CDL.Continuous.Add add(k2=-1)
"Difference between the calculated and expected conversion output";
Buildings.Controls.OBC.CDL.Continuous.Add add1(k2=-1)
"Difference between the calculated and expected conversion output";
protected
parameter Real kin = 273.15 "Validation input";
parameter Real kin1 = 373.15 "Validation input 1";
parameter Real kout = 32. "Validation output";
parameter Real kout1 = 100. * (9./5.) + 32. "Validation output 1";
Buildings.Controls.OBC.UnitConversions.To_degF to_degF
"Unit converter from kelvin to degree Fahrenheit ";
Buildings.Controls.OBC.UnitConversions.To_degF to_degF1
"Unit converter from kelvin to degree Fahrenheit ";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant value(
final k=kin)
"Value to convert";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant value1(
final k=kin1)
"Value to convert";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant result(
final k=kout)
"Expected converted value";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant result1(
final k=kout1)
"Expected converted value";
equation
connect(result.y, add.u2);
connect(result1.y, add1.u2);
connect(value1.y,to_degF1.u);
connect(to_degF1.y, add1.u1);
connect(to_degF.y, add.u1);
connect(value.y,to_degF.u);
end To_degF;
Buildings.Controls.OBC.UnitConversions.Validation.To_gal
Validation model for unit conversion from cubic meter to gallon
Information
This model validates volume unit conversion from cubic meter to gallon.
Extends from Modelica.Icons.Example (Icon for runnable examples).
Modelica definition
model To_gal "Validation model for unit conversion from cubic meter to gallon"
extends Modelica.Icons.Example;
Buildings.Controls.OBC.CDL.Continuous.Add add(k2=-1)
"Difference between the calculated and expected conversion output";
Buildings.Controls.OBC.CDL.Continuous.Add add1(k2=-1)
"Difference between the calculated and expected conversion output";
protected
parameter Real kin = 1.*0.003785412 "Validation input";
parameter Real kin1 = 100.*0.003785412 "Validation input 1";
parameter Real kout = 1. "Validation output";
parameter Real kout1 = 100. "Validation output 1";
Buildings.Controls.OBC.UnitConversions.To_gal to_gal
"Unit converter from cubic meter to gallon ";
Buildings.Controls.OBC.UnitConversions.To_gal to_gal1
"Unit converter from cubic meter to gallon ";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant value(
final k=kin)
"Value to convert";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant value1(
final k=kin1)
"Value to convert";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant result(
final k=kout)
"Expected converted value";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant result1(
final k=kout1)
"Expected converted value";
equation
connect(result.y, add.u2);
connect(result1.y, add1.u2);
connect(value1.y,to_gal1.u);
connect(to_gal1.y, add1.u1);
connect(to_gal.y, add.u1);
connect(value.y,to_gal.u);
end To_gal;
Buildings.Controls.OBC.UnitConversions.Validation.To_hp
Validation model for unit conversion from watt to horsepower
Information
This model validates power unit conversion from watt to horsepower.
Extends from Modelica.Icons.Example (Icon for runnable examples).
Modelica definition
model To_hp "Validation model for unit conversion from watt to horsepower"
extends Modelica.Icons.Example;
Buildings.Controls.OBC.CDL.Continuous.Add add(k2=-1)
"Difference between the calculated and expected conversion output";
Buildings.Controls.OBC.CDL.Continuous.Add add1(k2=-1)
"Difference between the calculated and expected conversion output";
protected
parameter Real kin = 10.*0.7457 "Validation input";
parameter Real kin1 = 45.*0.7457 "Validation input 1";
parameter Real kout = 10. "Validation output";
parameter Real kout1 = 45. "Validation output 1";
Buildings.Controls.OBC.UnitConversions.To_hp to_hp
"Unit converter from watt to horsepower ";
Buildings.Controls.OBC.UnitConversions.To_hp to_hp1
"Unit converter from watt to horsepower ";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant value(
final k=kin)
"Value to convert";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant value1(
final k=kin1)
"Value to convert";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant result(
final k=kout)
"Expected converted value";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant result1(
final k=kout1)
"Expected converted value";
equation
connect(result.y, add.u2);
connect(result1.y, add1.u2);
connect(value1.y,to_hp1.u);
connect(to_hp1.y, add1.u1);
connect(to_hp.y, add.u1);
connect(value.y,to_hp.u);
end To_hp;
Buildings.Controls.OBC.UnitConversions.Validation.To_inH2O
Validation model for unit conversion from pascal to inch of water gauge (at 60 degF)
Information
This model validates pressure unit conversion from pascal to inch of water gauge (at 60 degF).
Extends from Modelica.Icons.Example (Icon for runnable examples).
Modelica definition
model To_inH2O "Validation model for unit conversion from pascal to inch of water gauge (at 60 degF)"
extends Modelica.Icons.Example;
Buildings.Controls.OBC.CDL.Continuous.Add add(k2=-1)
"Difference between the calculated and expected conversion output";
Buildings.Controls.OBC.CDL.Continuous.Add add1(k2=-1)
"Difference between the calculated and expected conversion output";
protected
parameter Real kin = 25. "Validation input";
parameter Real kin1 = 100000. "Validation input 1";
parameter Real kout = 25./248.84 "Validation output";
parameter Real kout1 = 100000./248.84 "Validation output 1";
Buildings.Controls.OBC.UnitConversions.To_inH2O to_inH2O
"Unit converter from pascal to inch of water gauge (at 60 degF) ";
Buildings.Controls.OBC.UnitConversions.To_inH2O to_inH2O1
"Unit converter from pascal to inch of water gauge (at 60 degF) ";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant value(
final k=kin)
"Value to convert";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant value1(
final k=kin1)
"Value to convert";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant result(
final k=kout)
"Expected converted value";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant result1(
final k=kout1)
"Expected converted value";
equation
connect(result.y, add.u2);
connect(result1.y, add1.u2);
connect(value1.y,to_inH2O1.u);
connect(to_inH2O1.y, add1.u1);
connect(to_inH2O.y, add.u1);
connect(value.y,to_inH2O.u);
end To_inH2O;
Buildings.Controls.OBC.UnitConversions.Validation.To_psi
Validation model for unit conversion from pascal to pound-force per square inch
Information
This model validates pressure unit conversion from pascal to pound-force per square inch.
Extends from Modelica.Icons.Example (Icon for runnable examples).
Modelica definition
model To_psi "Validation model for unit conversion from pascal to pound-force per square inch"
extends Modelica.Icons.Example;
Buildings.Controls.OBC.CDL.Continuous.Add add(k2=-1)
"Difference between the calculated and expected conversion output";
Buildings.Controls.OBC.CDL.Continuous.Add add1(k2=-1)
"Difference between the calculated and expected conversion output";
protected
parameter Real kin = 0.0036*6895. "Validation input";
parameter Real kin1 = 1.*6895. "Validation input 1";
parameter Real kout = 0.0036 "Validation output";
parameter Real kout1 = 1. "Validation output 1";
Buildings.Controls.OBC.UnitConversions.To_psi to_psi
"Unit converter from pascal to pound-force per square inch ";
Buildings.Controls.OBC.UnitConversions.To_psi to_psi1
"Unit converter from pascal to pound-force per square inch ";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant value(
final k=kin)
"Value to convert";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant value1(
final k=kin1)
"Value to convert";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant result(
final k=kout)
"Expected converted value";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant result1(
final k=kout1)
"Expected converted value";
equation
connect(result.y, add.u2);
connect(result1.y, add1.u2);
connect(value1.y,to_psi1.u);
connect(to_psi1.y, add1.u1);
connect(to_psi.y, add.u1);
connect(value.y,to_psi.u);
end To_psi;
Buildings.Controls.OBC.UnitConversions.Validation.To_quad
Validation model for unit conversion from joule to quads
Information
This model validates energy unit conversion from joule to quads.
Extends from Modelica.Icons.Example (Icon for runnable examples).
Modelica definition
model To_quad "Validation model for unit conversion from joule to quads"
extends Modelica.Icons.Example;
Buildings.Controls.OBC.CDL.Continuous.Add add(k2=-1)
"Difference between the calculated and expected conversion output";
Buildings.Controls.OBC.CDL.Continuous.Add add1(k2=-1)
"Difference between the calculated and expected conversion output";
protected
parameter Real kin = 1.*1055.56e15 "Validation input";
parameter Real kin1 = 2.*1055.56e15 "Validation input 1";
parameter Real kout = 1. "Validation output";
parameter Real kout1 = 2. "Validation output 1";
Buildings.Controls.OBC.UnitConversions.To_quad to_quad
"Unit converter from joule to quads ";
Buildings.Controls.OBC.UnitConversions.To_quad to_quad1
"Unit converter from joule to quads ";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant value(
final k=kin)
"Value to convert";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant value1(
final k=kin1)
"Value to convert";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant result(
final k=kout)
"Expected converted value";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant result1(
final k=kout1)
"Expected converted value";
equation
connect(result.y, add.u2);
connect(result1.y, add1.u2);
connect(value1.y,to_quad1.u);
connect(to_quad1.y, add1.u1);
connect(to_quad.y, add.u1);
connect(value.y,to_quad.u);
end To_quad;
Buildings.Controls.OBC.UnitConversions.Validation.To_ton
Validation model for unit conversion from watt to ton of refrigeration
Information
This model validates power unit conversion from watt to ton of refrigeration.
Extends from Modelica.Icons.Example (Icon for runnable examples).
Modelica definition
model To_ton "Validation model for unit conversion from watt to ton of refrigeration"
extends Modelica.Icons.Example;
Buildings.Controls.OBC.CDL.Continuous.Add add(k2=-1)
"Difference between the calculated and expected conversion output";
Buildings.Controls.OBC.CDL.Continuous.Add add1(k2=-1)
"Difference between the calculated and expected conversion output";
protected
parameter Real kin = 3517. "Validation input";
parameter Real kin1 = 351700. "Validation input 1";
parameter Real kout = 1. "Validation output";
parameter Real kout1 = 100. "Validation output 1";
Buildings.Controls.OBC.UnitConversions.To_ton to_ton
"Unit converter from watt to ton of refrigeration ";
Buildings.Controls.OBC.UnitConversions.To_ton to_ton1
"Unit converter from watt to ton of refrigeration ";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant value(
final k=kin)
"Value to convert";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant value1(
final k=kin1)
"Value to convert";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant result(
final k=kout)
"Expected converted value";
Buildings.Controls.OBC.CDL.Continuous.Sources.Constant result1(
final k=kout1)
"Expected converted value";
equation
connect(result.y, add.u2);
connect(result1.y, add1.u2);
connect(value1.y,to_ton1.u);
connect(to_ton1.y, add1.u1);
connect(to_ton.y, add.u1);
connect(value.y,to_ton.u);
end To_ton;