Buildings.Controls.OBC.CDL.Routing

Package with blocks that combine and extract signals

Information

This package contains blocks to combine and extract signals.

Package Content

Name	Description
BooleanReplicator	Boolean signal replicator
IntegerReplicator	Integer signal replicator
RealExtractSignal	Extract signals from an input signal vector
RealExtractor	Extract scalar signal out of signal vector dependent on Integer input index
RealReplicator	Real signal replicator
Validation	Collection of models that validate the routing blocks of the CDL

Buildings.Controls.OBC.CDL.Routing.BooleanReplicator

Boolean signal replicator

Buildings.Controls.OBC.CDL.Routing.BooleanReplicator

Information

This block replicates the Boolean input signal to an array of nout identical Boolean output signals.

Parameters

Type	Name	Default	Description
Integer	nout	1	Number of outputs

Connectors

Type	Name	Description
input BooleanInput	u	Connector of Boolean input signal
output BooleanOutput	y[nout]	Connector of Boolean output signals

Modelica definition

block BooleanReplicator "Boolean signal replicator" parameter Integer nout=1 "Number of outputs"; Interfaces.BooleanInput u "Connector of Boolean input signal"; Interfaces.BooleanOutput y[nout] "Connector of Boolean output signals"; equation y=fill( u, nout); end BooleanReplicator;

Buildings.Controls.OBC.CDL.Routing.IntegerReplicator

Integer signal replicator

Buildings.Controls.OBC.CDL.Routing.IntegerReplicator

Information

This block replicates the Integer input signal to an array of nout identical Integer output signals.

Parameters

Type	Name	Default	Description
Integer	nout	1	Number of outputs

Connectors

Type	Name	Description
input IntegerInput	u	Connector of Integer input signal
output IntegerOutput	y[nout]	Connector of Integer output signals

Modelica definition

block IntegerReplicator "Integer signal replicator" parameter Integer nout=1 "Number of outputs"; Interfaces.IntegerInput u "Connector of Integer input signal"; Interfaces.IntegerOutput y[nout] "Connector of Integer output signals"; equation y=fill( u, nout); end IntegerReplicator;

Buildings.Controls.OBC.CDL.Routing.RealExtractSignal

Extract signals from an input signal vector

Buildings.Controls.OBC.CDL.Routing.RealExtractSignal

Information

Extract signals from the input connector and transfer them to the output connector.

The extracting scheme is given by the integer vector extract. This vector specifies which input signals are taken and in which order they are transferred to the output vector. Note that the dimension of extract has to match the number of outputs. Additionally, the dimensions of the input connector signals and the output connector signals have to be explicitly defined via the parameters nin and nout.

Example

The specification

     nin = 7 "Number of inputs";
     nout = 4 "Number of outputs";
     extract[nout] = {6,3,3,2} "Extracting vector";

extracts four output signals (nout=4) from the seven elements of the input vector (nin=7):

   output no. 1 is set equal to input no. 6
   output no. 2 is set equal to input no. 3
   output no. 3 is set equal to input no. 3
   output no. 4 is set equal to input no. 2

Parameters

Type	Name	Default	Description
Integer	nin	1	Number of inputs
Integer	nout	1	Number of outputs
Integer	extract[nout]	1:nout	Extracting vector

Connectors

Type	Name	Description
input RealInput	u[nin]	Connector of Real input signal
output RealOutput	y[nout]	Connector of Real output signal

Modelica definition

block RealExtractSignal "Extract signals from an input signal vector" parameter Integer nin=1 "Number of inputs"; parameter Integer nout=1 "Number of outputs"; parameter Integer extract[nout]=1:nout "Extracting vector"; Interfaces.RealInput u[nin] "Connector of Real input signal"; Interfaces.RealOutput y[nout] "Connector of Real output signal"; equation for i in 1:nout loop y[i]=u[extract[i]]; end for; end RealExtractSignal;

Buildings.Controls.OBC.CDL.Routing.RealExtractor

Extract scalar signal out of signal vector dependent on Integer input index

Buildings.Controls.OBC.CDL.Routing.RealExtractor

Information

Block that extracts a scalar output signal out the vector of input signals dependent on the Integer value of the input index:

    y = u [ index ] ;

where index is an additional Integer input signal.

Parameters

Type	Name	Default	Description
Boolean	allowOutOfRange	false	Index may be out of range
Integer	nin	1	Number of inputs
Real	outOfRangeValue	1e10	Output signal if index is out of range

Connectors

Type	Name	Description
input IntegerInput	index	Index of input vector element to be extracted out
input RealInput	u[nin]	Connector of Real input signals
output RealOutput	y	Connector of Real output signal

Modelica definition

block RealExtractor "Extract scalar signal out of signal vector dependent on Integer input index" parameter Boolean allowOutOfRange=false "Index may be out of range"; parameter Integer nin=1 "Number of inputs"; parameter Real outOfRangeValue=1e10 "Output signal if index is out of range"; Interfaces.IntegerInput index "Index of input vector element to be extracted out"; Interfaces.RealInput u[nin] "Connector of Real input signals"; Interfaces.RealOutput y "Connector of Real output signal"; protected Real k[nin] "Indicator used to extract the signal"; initial equation pre(index)=0; equation when {initial(),change(index)} then for i in 1:nin loop k[i]= if index == i then 1 else 0; end for; end when; y=if not allowOutOfRange or index > 0 and index <= nin then k*u else outOfRangeValue; end RealExtractor;

Buildings.Controls.OBC.CDL.Routing.RealReplicator

Real signal replicator

Buildings.Controls.OBC.CDL.Routing.RealReplicator

Information

This block replicates the Real input signal to an array of nout identical Real output signals.

Parameters

Type	Name	Default	Description
Integer	nout	1	Number of outputs

Connectors

Type	Name	Description
input RealInput	u	Connector of Real input signal
output RealOutput	y[nout]	Connector of Real output signal

Modelica definition

block RealReplicator "Real signal replicator" parameter Integer nout=1 "Number of outputs"; Interfaces.RealInput u "Connector of Real input signal"; Interfaces.RealOutput y[nout] "Connector of Real output signal"; equation y=fill( u, nout); end RealReplicator;