Buildings.Fluid.Movers.Data.Pumps.Wilo
Package with performance data for Wilo pumps
Information
This package contains performance data for Wilo pumps.
Extends from Modelica.Icons.Package (Icon for standard packages).
Package Content
| Name | Description |
|---|---|
 CronolineIL80slash220dash4slash4
|
Pump data for a Wilo Cronoline-IL 80/220-4/4 pump |
| Stratos25slash1to4
|
Pump data for a Wilo Stratos 25/1-4 pump |
| Stratos25slash1to6
|
Pump data for a Wilo Stratos 25/1-6 pump |
| Stratos25slash1to8
|
Pump data for a Wilo Stratos 25/1-8 pump |
| Stratos30slash1to4
|
Pump data for a Wilo Stratos 30/1-4 pump |
| Stratos30slash1to8
|
Pump data for a Wilo Stratos 30/1-8 pump |
| Stratos32slash1to12
|
Pump data for a Wilo Stratos 32/1-12 pump |
| Stratos40slash1to12
|
Pump data for a Wilo Stratos 40/1-12 pump |
| Stratos40slash1to8
|
Pump data for a Wilo Stratos 40/1-8 pump |
| Stratos50slash1to12
|
Pump data for a Wilo Stratos 50/1-12 pump |
| Stratos80slash1to12
|
Pump data for a Wilo Stratos 80/1-12 pump |
| TopS25slash10
|
Pump data for a staged Wilo-Top-S 25/10 pump |
| TopS30slash10
|
Pump data for a staged Wilo-Top-S 30/10 pump |
| TopS30slash5
|
Pump data for a staged Wilo-Top-S 30/5 pump |
| TopS40slash10
|
Pump data for a staged Wilo-Top-S 40/10 pump |
| TopS40slash7
|
Pump data for a staged Wilo-Top-S 40/7 pump |
| VeroLine50slash150dash4slash2
|
Pump data for a Wilo Veroline IP-E 50/150-4/2 pump |
| VeroLine80slash115dash2comma2slash2
|
Pump data for a Wilo Veroline IP-E 80/115-2,2/2 pump |
Buildings.Fluid.Movers.Data.Pumps.Wilo.CronolineIL80slash220dash4slash4
Pump data for a Wilo Cronoline-IL 80/220-4/4 pump
Information
See Buildings.Fluid.Movers.Data.Pumps.Wilo.Stratos25slash1to6 for more information about how the data is derived.
Extends from Generic (Generic data record for movers).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Power computation | |||
| Boolean | use_powerCharacteristic | true | Use power data instead of motor efficiency |
| efficiencyParameters | hydraulicEfficiency | Hydraulic efficiency (used if use_powerCharacteristic=false) | |
| efficiencyParameters | motorEfficiency | Electric motor efficiency (used if use_powerCharacteristic=false) | |
| Motor heat rejection | |||
| Boolean | motorCooledByFluid | true | If true, then motor heat is added to fluid stream |
| Normalized speeds (used in model, default values assigned from speeds in rpm) | |||
| Real | speed_nominal | 1 | Nominal rotational speed for flow characteristic [1] |
| Real | constantSpeed | constantSpeed_rpm/speed_rpm_... | Normalized speed set point, used if inputType = Buildings.Fluid.Types.InputType.Constant [1] |
| Real | speeds[:] | speeds_rpm/speed_rpm_nominal | Vector of normalized speed set points, used if inputType = Buildings.Fluid.Types.InputType.Stages [1] |
| Speeds in RPM | |||
| AngularVelocity_rpm | speed_rpm_nominal | 1450 | Nominal rotational speed for flow characteristic [rev/min] |
| AngularVelocity_rpm | constantSpeed_rpm | speed_rpm_nominal | Speed set point, used if inputType = Buildings.Fluid.Types.InputType.Constant [rev/min] |
| AngularVelocity_rpm | speeds_rpm[:] | {speed_rpm_nominal} | Vector of speed set points, used if inputType = Buildings.Fluid.Types.InputType.Stages [rev/min] |
Modelica definition
record CronolineIL80slash220dash4slash4
"Pump data for a Wilo Cronoline-IL 80/220-4/4 pump"
extends Generic(
use_powerCharacteristic=true,
speed_rpm_nominal=1450,
power(V_flow={0.00303454715219,0.00578898225957,0.00863678804855,0.0113912231559,0.0146125116713,0.0181605975724,0.0214285714286,0.0248366013072,0.0274042950514,0.0282446311858}, P={1905.29339941,2202.03582759,2548.86483304,2812.07908132,3146.06691483,3435.07911022,3592.75276695,3710.09774539,3774.78991597,3793.34692457}),
pressure(V_flow={0.00303454715219,0.00578898225957,0.00863678804855,0.0113912231559,0.0146125116713,0.0181605975724,0.0214285714286,0.0248366013072,0.0274042950514,0.0282446311858}, dp={168215.17064,166653.242326,164291.843595,161128.282627,154367.77774,142807.085577,128439.498542,108468.216086,92889.3102384,86895.3009775}));
end CronolineIL80slash220dash4slash4;
Buildings.Fluid.Movers.Data.Pumps.Wilo.Stratos25slash1to4
Pump data for a Wilo Stratos 25/1-4 pump
Information
Data from: http://productfinder.wilo.com/en/COM/product/0000000e000379df0002003a/fc_product_datasheet
See Buildings.Fluid.Movers.Data.Pumps.Wilo.Stratos25slash1to6 for more information about how the data is derived.
Extends from Generic (Generic data record for movers).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Power computation | |||
| Boolean | use_powerCharacteristic | true | Use power data instead of motor efficiency |
| efficiencyParameters | hydraulicEfficiency | Hydraulic efficiency (used if use_powerCharacteristic=false) | |
| efficiencyParameters | motorEfficiency | Electric motor efficiency (used if use_powerCharacteristic=false) | |
| Motor heat rejection | |||
| Boolean | motorCooledByFluid | true | If true, then motor heat is added to fluid stream |
| Normalized speeds (used in model, default values assigned from speeds in rpm) | |||
| Real | speed_nominal | 1 | Nominal rotational speed for flow characteristic [1] |
| Real | constantSpeed | constantSpeed_rpm/speed_rpm_... | Normalized speed set point, used if inputType = Buildings.Fluid.Types.InputType.Constant [1] |
| Real | speeds[:] | speeds_rpm/speed_rpm_nominal | Vector of normalized speed set points, used if inputType = Buildings.Fluid.Types.InputType.Stages [1] |
| Speeds in RPM | |||
| AngularVelocity_rpm | speed_rpm_nominal | 1800 | Nominal rotational speed for flow characteristic [rev/min] |
| AngularVelocity_rpm | constantSpeed_rpm | speed_rpm_nominal | Speed set point, used if inputType = Buildings.Fluid.Types.InputType.Constant [rev/min] |
| AngularVelocity_rpm | speeds_rpm[:] | {speed_rpm_nominal} | Vector of speed set points, used if inputType = Buildings.Fluid.Types.InputType.Stages [rev/min] |
Modelica definition
record Stratos25slash1to4 "Pump data for a Wilo Stratos 25/1-4 pump"
extends Generic(
speed_rpm_nominal=1800,
use_powerCharacteristic = true,
power(V_flow={5.55555555556e-07,0.000402190923318,0.00052269170579,
0.000643192488263,0.000752738654147,0.000866979655712,
0.000973395931142,0.00108607198748,0.00115962441315}, P={
14.2085618951,21.2596204596,23.3573239437,25.1349149442,26.581943662,
27.9121571534,28.8498841148,29.4981726255,29.7520982304}),
pressure(V_flow={5.55555555556e-07,0.000402190923318,0.00052269170579,
0.000643192488263,0.000752738654147,0.000866979655712,
0.000973395931142,0.00108607198748,0.00115962441315}, dp={
17066.9518717,16997.0053476,16437.4331551,15528.1283422,14408.9839572,
13149.9465241,11681.0695187,9932.40641711,8533.47593583}));
end Stratos25slash1to4;
Buildings.Fluid.Movers.Data.Pumps.Wilo.Stratos25slash1to6
Pump data for a Wilo Stratos 25/1-6 pump
Information
Data from http://productfinder.wilo.com/en/COM/product/00000018000028040002003a/fc_product_datasheet
The nominal rpm is arbitrarily chosen as the rpm of the pump curve in the data sheet that has the highest rpm, without being limited by the maximum power limitation (see dotted curve on figure below). Pump curves (H(m_flow) and P(m_flow)) from the data sheets are digitized using web plot digitizer.
Limitations:
- The pump curve cap at high rpm that can be seen is not enforced by the model.
- The pump curve may be altered slightly to guarantee that dp/dm<0
The figure below illustrates a digitized pump curve.
Extends from Generic (Generic data record for movers).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Power computation | |||
| Boolean | use_powerCharacteristic | true | Use power data instead of motor efficiency |
| efficiencyParameters | hydraulicEfficiency | Hydraulic efficiency (used if use_powerCharacteristic=false) | |
| efficiencyParameters | motorEfficiency | Electric motor efficiency (used if use_powerCharacteristic=false) | |
| Motor heat rejection | |||
| Boolean | motorCooledByFluid | true | If true, then motor heat is added to fluid stream |
| Normalized speeds (used in model, default values assigned from speeds in rpm) | |||
| Real | speed_nominal | 1 | Nominal rotational speed for flow characteristic [1] |
| Real | constantSpeed | constantSpeed_rpm/speed_rpm_... | Normalized speed set point, used if inputType = Buildings.Fluid.Types.InputType.Constant [1] |
| Real | speeds[:] | speeds_rpm/speed_rpm_nominal | Vector of normalized speed set points, used if inputType = Buildings.Fluid.Types.InputType.Stages [1] |
| Speeds in RPM | |||
| AngularVelocity_rpm | speed_rpm_nominal | 2540 | Nominal rotational speed for flow characteristic [rev/min] |
| AngularVelocity_rpm | constantSpeed_rpm | speed_rpm_nominal | Speed set point, used if inputType = Buildings.Fluid.Types.InputType.Constant [rev/min] |
| AngularVelocity_rpm | speeds_rpm[:] | {speed_rpm_nominal} | Vector of speed set points, used if inputType = Buildings.Fluid.Types.InputType.Stages [rev/min] |
Modelica definition
record Stratos25slash1to6 "Pump data for a Wilo Stratos 25/1-6 pump"
extends Generic(
speed_rpm_nominal=2540,
use_powerCharacteristic=true,
power(V_flow={8.4618254914e-06,0.000274485730449,0.000555832400486,
0.000837082776634,0.00110292011218,0.00138657181719,0.00166761756882,
0.00187198329301}, P={27.7850423935,35.9020280633,46.212011386,
55.5493899809,62.3704820257,68.7045763872,73.3263927089,75.1773568358}),
pressure(V_flow={8.4618254914e-06,0.000274485730449,0.000555832400486,
0.000837082776634,0.00110292011218,0.00138657181719,0.00166761756882,
0.00187198329301}, dp={34808.1176471,34738.9411765,34508.1176471,
32430.7058824,29083.7647059,24005.6470588,18004.2352941,13041.5294118}));
end Stratos25slash1to6;
Buildings.Fluid.Movers.Data.Pumps.Wilo.Stratos25slash1to8
Pump data for a Wilo Stratos 25/1-8 pump
Information
Data from: http://productfinder.wilo.com/en/COM/product/0000000e000379df0002003a/fc_product_datasheet
See Buildings.Fluid.Movers.Data.Pumps.Wilo.Stratos25slash1to6 for more information about how the data is derived.
Extends from Generic (Generic data record for movers).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Power computation | |||
| Boolean | use_powerCharacteristic | true | Use power data instead of motor efficiency |
| efficiencyParameters | hydraulicEfficiency | Hydraulic efficiency (used if use_powerCharacteristic=false) | |
| efficiencyParameters | motorEfficiency | Electric motor efficiency (used if use_powerCharacteristic=false) | |
| Motor heat rejection | |||
| Boolean | motorCooledByFluid | true | If true, then motor heat is added to fluid stream |
| Normalized speeds (used in model, default values assigned from speeds in rpm) | |||
| Real | speed_nominal | 1 | Nominal rotational speed for flow characteristic [1] |
| Real | constantSpeed | constantSpeed_rpm/speed_rpm_... | Normalized speed set point, used if inputType = Buildings.Fluid.Types.InputType.Constant [1] |
| Real | speeds[:] | speeds_rpm/speed_rpm_nominal | Vector of normalized speed set points, used if inputType = Buildings.Fluid.Types.InputType.Stages [1] |
| Speeds in RPM | |||
| AngularVelocity_rpm | speed_rpm_nominal | 3040 | Nominal rotational speed for flow characteristic [rev/min] |
| AngularVelocity_rpm | constantSpeed_rpm | speed_rpm_nominal | Speed set point, used if inputType = Buildings.Fluid.Types.InputType.Constant [rev/min] |
| AngularVelocity_rpm | speeds_rpm[:] | {speed_rpm_nominal} | Vector of speed set points, used if inputType = Buildings.Fluid.Types.InputType.Stages [rev/min] |
Modelica definition
record Stratos25slash1to8 "Pump data for a Wilo Stratos 25/1-8 pump"
extends Generic(
speed_rpm_nominal=3040,
use_powerCharacteristic=true,
power(V_flow={2.66111582909e-06,0.000621486635037,0.000887056469533,
0.0011525489114,0.00140859349908,0.00168018209891,0.00191740837085,
0.00219831980599}, P={42.7878285797,72.7712666315,87.0576021552,
99.7562542248,108.565085499,117.461493336,123.188074537,128.511579716}),
pressure(V_flow={2.66111582909e-06,0.000621486635037,0.000887056469533,
0.0011525489114,0.00140859349908,0.00168018209891,0.00191740837085,
0.00219831980599}, dp={50002.7035151,49603.919395,47783.2940685,
44505.1908368,39882.6694921,33688.9797121,27835.1000463,20631.4409942}));
end Stratos25slash1to8;
Buildings.Fluid.Movers.Data.Pumps.Wilo.Stratos30slash1to4
Pump data for a Wilo Stratos 30/1-4 pump
Information
Data from: http://productfinder.wilo.com/en/COM/product/0000000e000379df0002003a/fc_product_datasheet
See Buildings.Fluid.Movers.Data.Pumps.Wilo.Stratos25slash1to6 for more information about how the data is derived.
Extends from Generic (Generic data record for movers).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Power computation | |||
| Boolean | use_powerCharacteristic | true | Use power data instead of motor efficiency |
| efficiencyParameters | hydraulicEfficiency | Hydraulic efficiency (used if use_powerCharacteristic=false) | |
| efficiencyParameters | motorEfficiency | Electric motor efficiency (used if use_powerCharacteristic=false) | |
| Motor heat rejection | |||
| Boolean | motorCooledByFluid | true | If true, then motor heat is added to fluid stream |
| Normalized speeds (used in model, default values assigned from speeds in rpm) | |||
| Real | speed_nominal | 1 | Nominal rotational speed for flow characteristic [1] |
| Real | constantSpeed | constantSpeed_rpm/speed_rpm_... | Normalized speed set point, used if inputType = Buildings.Fluid.Types.InputType.Constant [1] |
| Real | speeds[:] | speeds_rpm/speed_rpm_nominal | Vector of normalized speed set points, used if inputType = Buildings.Fluid.Types.InputType.Stages [1] |
| Speeds in RPM | |||
| AngularVelocity_rpm | speed_rpm_nominal | 1800 | Nominal rotational speed for flow characteristic [rev/min] |
| AngularVelocity_rpm | constantSpeed_rpm | speed_rpm_nominal | Speed set point, used if inputType = Buildings.Fluid.Types.InputType.Constant [rev/min] |
| AngularVelocity_rpm | speeds_rpm[:] | {speed_rpm_nominal} | Vector of speed set points, used if inputType = Buildings.Fluid.Types.InputType.Stages [rev/min] |
Modelica definition
record Stratos30slash1to4 "Pump data for a Wilo Stratos 30/1-4 pump"
extends Generic(
speed_rpm_nominal=1800,
use_powerCharacteristic=true,
power(V_flow={5.55555555556e-07,0.000402190923318,0.00052269170579,
0.000643192488263,0.000752738654147,0.000866979655712,
0.000973395931142,0.00108607198748,0.00115962441315}, P={
14.2085618951,21.2596204596,23.3573239437,25.1349149442,26.581943662,
27.9121571534,28.8498841148,29.4981726255,29.7520982304}),
pressure(V_flow={5.55555555556e-07,0.000402190923318,0.00052269170579,
0.000643192488263,0.000752738654147,0.000866979655712,
0.000973395931142,0.00108607198748,0.00115962441315}, dp={
17066.9518717,16997.0053476,16437.4331551,15528.1283422,14408.9839572,
13149.9465241,11681.0695187,9932.40641711,8533.47593583}));
end Stratos30slash1to4;
Buildings.Fluid.Movers.Data.Pumps.Wilo.Stratos30slash1to8
Pump data for a Wilo Stratos 30/1-8 pump
Information
Data from: http://productfinder.wilo.com/en/COM/product/0000000e000379df0002003a/fc_product_datasheet
See Buildings.Fluid.Movers.Data.Pumps.Wilo.Stratos25slash1to6 for more information about how the data is derived.
Extends from Generic (Generic data record for movers).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Power computation | |||
| Boolean | use_powerCharacteristic | true | Use power data instead of motor efficiency |
| efficiencyParameters | hydraulicEfficiency | Hydraulic efficiency (used if use_powerCharacteristic=false) | |
| efficiencyParameters | motorEfficiency | Electric motor efficiency (used if use_powerCharacteristic=false) | |
| Motor heat rejection | |||
| Boolean | motorCooledByFluid | true | If true, then motor heat is added to fluid stream |
| Normalized speeds (used in model, default values assigned from speeds in rpm) | |||
| Real | speed_nominal | 1 | Nominal rotational speed for flow characteristic [1] |
| Real | constantSpeed | constantSpeed_rpm/speed_rpm_... | Normalized speed set point, used if inputType = Buildings.Fluid.Types.InputType.Constant [1] |
| Real | speeds[:] | speeds_rpm/speed_rpm_nominal | Vector of normalized speed set points, used if inputType = Buildings.Fluid.Types.InputType.Stages [1] |
| Speeds in RPM | |||
| AngularVelocity_rpm | speed_rpm_nominal | 3040 | Nominal rotational speed for flow characteristic [rev/min] |
| AngularVelocity_rpm | constantSpeed_rpm | speed_rpm_nominal | Speed set point, used if inputType = Buildings.Fluid.Types.InputType.Constant [rev/min] |
| AngularVelocity_rpm | speeds_rpm[:] | {speed_rpm_nominal} | Vector of speed set points, used if inputType = Buildings.Fluid.Types.InputType.Stages [rev/min] |
Modelica definition
record Stratos30slash1to8 "Pump data for a Wilo Stratos 30/1-8 pump"
extends Generic(
speed_rpm_nominal=3040,
use_powerCharacteristic=true,
power(V_flow={2.66111582909e-06,0.000621486635037,0.000887056469533,
0.0011525489114,0.00140859349908,0.00168018209891,0.00191740837085,
0.00219831980599}, P={42.7878285797,72.7712666315,87.0576021552,
99.7562542248,108.565085499,117.461493336,123.188074537,128.511579716}),
pressure(V_flow={2.66111582909e-06,0.000621486635037,0.000887056469533,
0.0011525489114,0.00140859349908,0.00168018209891,0.00191740837085,
0.00219831980599}, dp={50002.7035151,49603.919395,47783.2940685,
44505.1908368,39882.6694921,33688.9797121,27835.1000463,20631.4409942}));
end Stratos30slash1to8;
Buildings.Fluid.Movers.Data.Pumps.Wilo.Stratos32slash1to12
Pump data for a Wilo Stratos 32/1-12 pump
Information
Data from: http://productfinder.wilo.com/en/COM/product/0000000e000379df0002003a/fc_product_datasheet
See Buildings.Fluid.Movers.Data.Pumps.Wilo.Stratos25slash1to6 for more information about how the data is derived.
Extends from Generic (Generic data record for movers).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Power computation | |||
| Boolean | use_powerCharacteristic | true | Use power data instead of motor efficiency |
| efficiencyParameters | hydraulicEfficiency | Hydraulic efficiency (used if use_powerCharacteristic=false) | |
| efficiencyParameters | motorEfficiency | Electric motor efficiency (used if use_powerCharacteristic=false) | |
| Motor heat rejection | |||
| Boolean | motorCooledByFluid | true | If true, then motor heat is added to fluid stream |
| Normalized speeds (used in model, default values assigned from speeds in rpm) | |||
| Real | speed_nominal | 1 | Nominal rotational speed for flow characteristic [1] |
| Real | constantSpeed | constantSpeed_rpm/speed_rpm_... | Normalized speed set point, used if inputType = Buildings.Fluid.Types.InputType.Constant [1] |
| Real | speeds[:] | speeds_rpm/speed_rpm_nominal | Vector of normalized speed set points, used if inputType = Buildings.Fluid.Types.InputType.Stages [1] |
| Speeds in RPM | |||
| AngularVelocity_rpm | speed_rpm_nominal | 3580 | Nominal rotational speed for flow characteristic [rev/min] |
| AngularVelocity_rpm | constantSpeed_rpm | speed_rpm_nominal | Speed set point, used if inputType = Buildings.Fluid.Types.InputType.Constant [rev/min] |
| AngularVelocity_rpm | speeds_rpm[:] | {speed_rpm_nominal} | Vector of speed set points, used if inputType = Buildings.Fluid.Types.InputType.Stages [rev/min] |
Modelica definition
record Stratos32slash1to12 "Pump data for a Wilo Stratos 32/1-12 pump"
extends Generic(
speed_rpm_nominal=3580,
use_powerCharacteristic=true,
power(V_flow={2.11830535572e-05,0.000167865707434,0.000700939248601,
0.0012450039968,0.00177258193445,0.00227268185452,0.00272332134293,
0.00312450039968,0.00345423661071}, P={103.427852653,110.225580543,
135.414121033,162.955749719,191.043411366,216.051565678,230.204882307,
236.346847436,239.552825212}),
pressure(V_flow={2.11830535572e-05,0.000167865707434,0.000700939248601,
0.0012450039968,0.00177258193445,0.00227268185452,0.00272332134293,
0.00312450039968,0.00345423661071}, dp={59279.4925671,59115.2927989,
59000.1476354,57351.238791,54446.2693068,50284.7374612,44865.6398104,
38328.4550274,32066.9663984}));
end Stratos32slash1to12;
Buildings.Fluid.Movers.Data.Pumps.Wilo.Stratos40slash1to12
Pump data for a Wilo Stratos 40/1-12 pump
Information
Data from: http://productfinder.wilo.com/en/COM/product/0000000e000379df0002003a/fc_product_datasheet
See Buildings.Fluid.Movers.Data.Pumps.Wilo.Stratos25slash1to6 for more information about how the data is derived.
Extends from Generic (Generic data record for movers).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Power computation | |||
| Boolean | use_powerCharacteristic | true | Use power data instead of motor efficiency |
| efficiencyParameters | hydraulicEfficiency | Hydraulic efficiency (used if use_powerCharacteristic=false) | |
| efficiencyParameters | motorEfficiency | Electric motor efficiency (used if use_powerCharacteristic=false) | |
| Motor heat rejection | |||
| Boolean | motorCooledByFluid | true | If true, then motor heat is added to fluid stream |
| Normalized speeds (used in model, default values assigned from speeds in rpm) | |||
| Real | speed_nominal | 1 | Nominal rotational speed for flow characteristic [1] |
| Real | constantSpeed | constantSpeed_rpm/speed_rpm_... | Normalized speed set point, used if inputType = Buildings.Fluid.Types.InputType.Constant [1] |
| Real | speeds[:] | speeds_rpm/speed_rpm_nominal | Vector of normalized speed set points, used if inputType = Buildings.Fluid.Types.InputType.Stages [1] |
| Speeds in RPM | |||
| AngularVelocity_rpm | speed_rpm_nominal | 3690 | Nominal rotational speed for flow characteristic [rev/min] |
| AngularVelocity_rpm | constantSpeed_rpm | speed_rpm_nominal | Speed set point, used if inputType = Buildings.Fluid.Types.InputType.Constant [rev/min] |
| AngularVelocity_rpm | speeds_rpm[:] | {speed_rpm_nominal} | Vector of speed set points, used if inputType = Buildings.Fluid.Types.InputType.Stages [rev/min] |
Modelica definition
record Stratos40slash1to12 "Pump data for a Wilo Stratos 40/1-12 pump"
extends Generic(
speed_rpm_nominal=3690,
use_powerCharacteristic=true,
power(V_flow={2.05415499533e-05,0.0012380952381,0.00197759103641,0.00261998132586,
0.00315779645191,0.00385247432306,0.00436788048553,0.00493557422969},
P={195.711338777,254.50525152,302.203269367,339.387400348,367.008331835,
392.162896856,397.658764999,404.489181997}),
pressure(V_flow={2.05415499533e-05,0.0012380952381,0.00197759103641,0.00261998132586,
0.00315779645191,0.00385247432306,0.00436788048553,0.00493557422969},
dp={78528.2698296,78278.944236,77854.9591567,74108.1678158,68408.8742011,
57809.9050693,48393.0944907,37408.2956474}));
end Stratos40slash1to12;
Buildings.Fluid.Movers.Data.Pumps.Wilo.Stratos40slash1to8
Pump data for a Wilo Stratos 40/1-8 pump
Information
Data from: http://productfinder.wilo.com/en/COM/product/0000000e000379df0002003a/fc_product_datasheet
See Buildings.Fluid.Movers.Data.Pumps.Wilo.Stratos25slash1to6 for more information about how the data is derived.
Extends from Generic (Generic data record for movers).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Power computation | |||
| Boolean | use_powerCharacteristic | true | Use power data instead of motor efficiency |
| efficiencyParameters | hydraulicEfficiency | Hydraulic efficiency (used if use_powerCharacteristic=false) | |
| efficiencyParameters | motorEfficiency | Electric motor efficiency (used if use_powerCharacteristic=false) | |
| Motor heat rejection | |||
| Boolean | motorCooledByFluid | true | If true, then motor heat is added to fluid stream |
| Normalized speeds (used in model, default values assigned from speeds in rpm) | |||
| Real | speed_nominal | 1 | Nominal rotational speed for flow characteristic [1] |
| Real | constantSpeed | constantSpeed_rpm/speed_rpm_... | Normalized speed set point, used if inputType = Buildings.Fluid.Types.InputType.Constant [1] |
| Real | speeds[:] | speeds_rpm/speed_rpm_nominal | Vector of normalized speed set points, used if inputType = Buildings.Fluid.Types.InputType.Stages [1] |
| Speeds in RPM | |||
| AngularVelocity_rpm | speed_rpm_nominal | 3830 | Nominal rotational speed for flow characteristic [rev/min] |
| AngularVelocity_rpm | constantSpeed_rpm | speed_rpm_nominal | Speed set point, used if inputType = Buildings.Fluid.Types.InputType.Constant [rev/min] |
| AngularVelocity_rpm | speeds_rpm[:] | {speed_rpm_nominal} | Vector of speed set points, used if inputType = Buildings.Fluid.Types.InputType.Stages [rev/min] |
Modelica definition
record Stratos40slash1to8 "Pump data for a Wilo Stratos 40/1-8 pump"
extends Generic(
speed_rpm_nominal=3830,
use_powerCharacteristic=true,
power(V_flow={4.03163741226e-06,0.00188290448506,0.00245068662086,
0.00286231420438,0.00325508173616,0.00357919645424,0.00394696189973},
P={99.4470603052,175.709481933,197.426392754,209.437047607,213.2290948,
215.740841723,218.557203232}),
pressure(V_flow={4.03163741226e-06,0.00188290448506,0.00245068662086,
0.00286231420438,0.00325508173616,0.00357919645424,0.00394696189973},
dp={50361.3292164,50002.6907452,46761.3220062,42267.4693149,
36095.691563,30066.6880748,23476.280464}));
end Stratos40slash1to8;
Buildings.Fluid.Movers.Data.Pumps.Wilo.Stratos50slash1to12
Pump data for a Wilo Stratos 50/1-12 pump
Information
Data from: http://productfinder.wilo.com/en/COM/product/0000000e000379df0002003a/fc_product_datasheet
See Buildings.Fluid.Movers.Data.Pumps.Wilo.Stratos25slash1to6 for more information about how the data is derived.
Extends from Generic (Generic data record for movers).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Power computation | |||
| Boolean | use_powerCharacteristic | true | Use power data instead of motor efficiency |
| efficiencyParameters | hydraulicEfficiency | Hydraulic efficiency (used if use_powerCharacteristic=false) | |
| efficiencyParameters | motorEfficiency | Electric motor efficiency (used if use_powerCharacteristic=false) | |
| Motor heat rejection | |||
| Boolean | motorCooledByFluid | true | If true, then motor heat is added to fluid stream |
| Normalized speeds (used in model, default values assigned from speeds in rpm) | |||
| Real | speed_nominal | 1 | Nominal rotational speed for flow characteristic [1] |
| Real | constantSpeed | constantSpeed_rpm/speed_rpm_... | Normalized speed set point, used if inputType = Buildings.Fluid.Types.InputType.Constant [1] |
| Real | speeds[:] | speeds_rpm/speed_rpm_nominal | Vector of normalized speed set points, used if inputType = Buildings.Fluid.Types.InputType.Stages [1] |
| Speeds in RPM | |||
| AngularVelocity_rpm | speed_rpm_nominal | 3690 | Nominal rotational speed for flow characteristic [rev/min] |
| AngularVelocity_rpm | constantSpeed_rpm | speed_rpm_nominal | Speed set point, used if inputType = Buildings.Fluid.Types.InputType.Constant [rev/min] |
| AngularVelocity_rpm | speeds_rpm[:] | {speed_rpm_nominal} | Vector of speed set points, used if inputType = Buildings.Fluid.Types.InputType.Stages [rev/min] |
Modelica definition
record Stratos50slash1to12 "Pump data for a Wilo Stratos 50/1-12 pump"
extends Generic(
speed_rpm_nominal=3690,
use_powerCharacteristic=true,
power(V_flow={5.55555555556e-07,0.00209948320413,0.00303617571059,
0.00389750215332,0.0046188630491,0.00546942291128,0.00621231696813,
0.00695521102498,0.00755813953488}, P={205.291823945,337.504763698,
400.584905585,453.68913657,488.040727585,515.872422868,528.307902115,
531.276246541,523.90128749}),
pressure(V_flow={5.55555555556e-07,0.00209948320413,0.00303617571059,
0.00389750215332,0.0046188630491,0.00546942291128,0.00621231696813,
0.00695521102498,0.00755813953488}, dp={74298.6885246,74154.3248189,
73404.0823485,70722.2584827,66879.2916508,59372.6282882,49547.6683187,
37985.8558902,27964.6709874}));
end Stratos50slash1to12;
Buildings.Fluid.Movers.Data.Pumps.Wilo.Stratos80slash1to12
Pump data for a Wilo Stratos 80/1-12 pump
Information
Data from: http://productfinder.wilo.com/en/COM/product/0000000e000379df0002003a/fc_product_datasheet
See Buildings.Fluid.Movers.Data.Pumps.Wilo.Stratos25slash1to6 for more information about how the data is derived.
Extends from Generic (Generic data record for movers).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Power computation | |||
| Boolean | use_powerCharacteristic | true | Use power data instead of motor efficiency |
| efficiencyParameters | hydraulicEfficiency | Hydraulic efficiency (used if use_powerCharacteristic=false) | |
| efficiencyParameters | motorEfficiency | Electric motor efficiency (used if use_powerCharacteristic=false) | |
| Motor heat rejection | |||
| Boolean | motorCooledByFluid | true | If true, then motor heat is added to fluid stream |
| Normalized speeds (used in model, default values assigned from speeds in rpm) | |||
| Real | speed_nominal | 1 | Nominal rotational speed for flow characteristic [1] |
| Real | constantSpeed | constantSpeed_rpm/speed_rpm_... | Normalized speed set point, used if inputType = Buildings.Fluid.Types.InputType.Constant [1] |
| Real | speeds[:] | speeds_rpm/speed_rpm_nominal | Vector of normalized speed set points, used if inputType = Buildings.Fluid.Types.InputType.Stages [1] |
| Speeds in RPM | |||
| AngularVelocity_rpm | speed_rpm_nominal | 2610 | Nominal rotational speed for flow characteristic [rev/min] |
| AngularVelocity_rpm | constantSpeed_rpm | speed_rpm_nominal | Speed set point, used if inputType = Buildings.Fluid.Types.InputType.Constant [rev/min] |
| AngularVelocity_rpm | speeds_rpm[:] | {speed_rpm_nominal} | Vector of speed set points, used if inputType = Buildings.Fluid.Types.InputType.Stages [rev/min] |
Modelica definition
record Stratos80slash1to12 "Pump data for a Wilo Stratos 80/1-12 pump"
extends Generic(
speed_rpm_nominal=2610,
use_powerCharacteristic=true,
power(V_flow={8.79043600562e-06,0.00277777777778,0.00556874120956,
0.00776635021097,0.00978815049226,0.0113484528833,0.0127329465541,
0.013985583685,0.0154360056259}, P={437.425146701,588.954435301,
792.603370491,931.705429399,1048.15648043,1115.77190985,1154.92222088,
1171.51603429,1166.47479929}),
pressure(V_flow={8.79043600562e-06,0.00277777777778,0.00556874120956,
0.00776635021097,0.00978815049226,0.0113484528833,0.0127329465541,
0.013985583685,0.0154360056259}, dp={78355.8975904,78243.6144578,
78054.5060241,75596.0963855,70490.1686747,63682.2650602,55361.4939759,
45527.8554217,30966.5060241}));
end Stratos80slash1to12;
Buildings.Fluid.Movers.Data.Pumps.Wilo.TopS25slash10
Pump data for a staged Wilo-Top-S 25/10 pump
Information
Data from: http://productfinder.wilo.com/en/COM/product/0000001000029c210002003a/fc_product_datasheet
See Buildings.Fluid.Movers.Data.Pumps.Wilo.Stratos25slash1to6 for more information about how the data is derived.
Extends from Generic (Generic data record for movers).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Power computation | |||
| Boolean | use_powerCharacteristic | true | Use power data instead of motor efficiency |
| efficiencyParameters | hydraulicEfficiency | Hydraulic efficiency (used if use_powerCharacteristic=false) | |
| efficiencyParameters | motorEfficiency | Electric motor efficiency (used if use_powerCharacteristic=false) | |
| Motor heat rejection | |||
| Boolean | motorCooledByFluid | true | If true, then motor heat is added to fluid stream |
| Normalized speeds (used in model, default values assigned from speeds in rpm) | |||
| Real | speed_nominal | 1 | Nominal rotational speed for flow characteristic [1] |
| Real | constantSpeed | constantSpeed_rpm/speed_rpm_... | Normalized speed set point, used if inputType = Buildings.Fluid.Types.InputType.Constant [1] |
| Real | speeds[:] | speeds_rpm/speed_rpm_nominal | Vector of normalized speed set points, used if inputType = Buildings.Fluid.Types.InputType.Stages [1] |
| Speeds in RPM | |||
| AngularVelocity_rpm | speed_rpm_nominal | 2650 | Nominal rotational speed for flow characteristic [rev/min] |
| AngularVelocity_rpm | constantSpeed_rpm | speed_rpm_nominal | Speed set point, used if inputType = Buildings.Fluid.Types.InputType.Constant [rev/min] |
| AngularVelocity_rpm | speeds_rpm[:] | {0,1950,2250,2650} | Vector of speed set points, used if inputType = Buildings.Fluid.Types.InputType.Stages [rev/min] |
Modelica definition
record TopS25slash10 "Pump data for a staged Wilo-Top-S 25/10 pump"
extends Generic(
speed_rpm_nominal=2650,
use_powerCharacteristic = true,
power(V_flow={3.51617440225e-06,0.000523909985935,0.000847398030942,
0.00115682137834,0.00148382559775,0.00177918424754,
0.00206047819972,0.00229254571027,0.0025,0.00271097046414,
0.00282700421941},
P={192.787993617,238.762280675,272.937843988,301.381574494,
326.18493197,344.613937245,359.220335761,369.040720135,
376.979332273,382.887700535,382.887700535}),
pressure(V_flow={3.51617440225e-06,0.000523909985935,0.000847398030942,
0.00115682137834,0.00148382559775,0.00177918424754,
0.00206047819972,0.00229254571027,0.0025,0.00271097046414,
0.00282700421941},
dp={110125.414283,106765.16619,100392.787862,92220.6199738,
81651.34693,70879.932776,60307.3708281,50930.4520427,
41152.0339559,29575.0912725,22388.3296727}),
speeds_rpm = {0, 1950, 2250, 2650});
end TopS25slash10;
Buildings.Fluid.Movers.Data.Pumps.Wilo.TopS30slash10
Pump data for a staged Wilo-Top-S 30/10 pump
Information
Data from: http://productfinder.wilo.com/en/COM/product/00000009000287740001003a/fc_product_datasheet
See Buildings.Fluid.Movers.Data.Pumps.Wilo.Stratos25slash1to6 for more information about how the data is derived.
Extends from Generic (Generic data record for movers).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Power computation | |||
| Boolean | use_powerCharacteristic | true | Use power data instead of motor efficiency |
| efficiencyParameters | hydraulicEfficiency | Hydraulic efficiency (used if use_powerCharacteristic=false) | |
| efficiencyParameters | motorEfficiency | Electric motor efficiency (used if use_powerCharacteristic=false) | |
| Motor heat rejection | |||
| Boolean | motorCooledByFluid | true | If true, then motor heat is added to fluid stream |
| Normalized speeds (used in model, default values assigned from speeds in rpm) | |||
| Real | speed_nominal | 1 | Nominal rotational speed for flow characteristic [1] |
| Real | constantSpeed | constantSpeed_rpm/speed_rpm_... | Normalized speed set point, used if inputType = Buildings.Fluid.Types.InputType.Constant [1] |
| Real | speeds[:] | speeds_rpm/speed_rpm_nominal | Vector of normalized speed set points, used if inputType = Buildings.Fluid.Types.InputType.Stages [1] |
| Speeds in RPM | |||
| AngularVelocity_rpm | speed_rpm_nominal | 2650 | Nominal rotational speed for flow characteristic [rev/min] |
| AngularVelocity_rpm | constantSpeed_rpm | speed_rpm_nominal | Speed set point, used if inputType = Buildings.Fluid.Types.InputType.Constant [rev/min] |
| AngularVelocity_rpm | speeds_rpm[:] | {0,1950,2250,2650} | Vector of speed set points, used if inputType = Buildings.Fluid.Types.InputType.Stages [rev/min] |
Modelica definition
record TopS30slash10 "Pump data for a staged Wilo-Top-S 30/10 pump"
extends Generic(
speed_rpm_nominal=2650,
use_powerCharacteristic = true,
power(V_flow={3.51617440225e-06,0.000523909985935,0.000847398030942,
0.00115682137834,0.00148382559775,0.00177918424754,
0.00206047819972,0.00229254571027,0.0025,
0.00271097046414,0.00282700421941},
P={192.787993617,238.762280675,272.937843988,
301.381574494,326.18493197,344.613937245,
359.220335761,369.040720135,376.979332273,
382.887700535,382.887700535}),
pressure(V_flow={3.51617440225e-06,0.000523909985935,0.000847398030942,
0.00115682137834,0.00148382559775,0.00177918424754,
0.00206047819972,0.00229254571027,0.0025,0.00271097046414,
0.00282700421941},
dp={110125.414283,106765.16619,100392.787862,92220.6199738,
81651.34693,70879.932776,60307.3708281,50930.4520427,
41152.0339559,29575.0912725,22388.3296727}),
speeds_rpm = {0, 1950, 2250, 2650});
end TopS30slash10;
Buildings.Fluid.Movers.Data.Pumps.Wilo.TopS30slash5
Pump data for a staged Wilo-Top-S 30/5 pump
Information
Data from: http://productfinder.wilo.com/en/COM/product/00000000000296670002003a/fc_product_datasheet
See Buildings.Fluid.Movers.Data.Pumps.Wilo.Stratos25slash1to6 for more information about how the data is derived.
Extends from Generic (Generic data record for movers).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Power computation | |||
| Boolean | use_powerCharacteristic | true | Use power data instead of motor efficiency |
| efficiencyParameters | hydraulicEfficiency | Hydraulic efficiency (used if use_powerCharacteristic=false) | |
| efficiencyParameters | motorEfficiency | Electric motor efficiency (used if use_powerCharacteristic=false) | |
| Motor heat rejection | |||
| Boolean | motorCooledByFluid | true | If true, then motor heat is added to fluid stream |
| Normalized speeds (used in model, default values assigned from speeds in rpm) | |||
| Real | speed_nominal | 1 | Nominal rotational speed for flow characteristic [1] |
| Real | constantSpeed | constantSpeed_rpm/speed_rpm_... | Normalized speed set point, used if inputType = Buildings.Fluid.Types.InputType.Constant [1] |
| Real | speeds[:] | speeds_rpm/speed_rpm_nominal | Vector of normalized speed set points, used if inputType = Buildings.Fluid.Types.InputType.Stages [1] |
| Speeds in RPM | |||
| AngularVelocity_rpm | speed_rpm_nominal | 2650 | Nominal rotational speed for flow characteristic [rev/min] |
| AngularVelocity_rpm | constantSpeed_rpm | speed_rpm_nominal | Speed set point, used if inputType = Buildings.Fluid.Types.InputType.Constant [rev/min] |
| AngularVelocity_rpm | speeds_rpm[:] | {0,1890,2190,2650} | Vector of speed set points, used if inputType = Buildings.Fluid.Types.InputType.Stages [rev/min] |
Modelica definition
record TopS30slash5 "Pump data for a staged Wilo-Top-S 30/5 pump"
extends Generic(
speed_rpm_nominal=2650,
use_powerCharacteristic = true,
power(V_flow={4.24448217317e-06,0.000275419732126,0.000501792114695,
0.000688077721185,0.000827202414639,0.00101584606678,
0.0011714770798,0.00132710809281,0.00148981324278,
0.00166195057536},
P={83.0171256559,101.117659669,113.263045942,122.28302674,
128.764680916,135.257448954,139.852003784,143.350736549,
145.269964752,146.115128625}),
pressure(V_flow={4.24448217317e-06,0.000275419732126,0.000501792114695,
0.000688077721185,0.000827202414639,0.00101584606678,
0.0011714770798,0.00132710809281,0.00148981324278,
0.00166195057536},
dp={52688.1456954,49223.2450331,45151.986755,40994.1059603,
37269.3377483,31205.7615894,25661.9205298,19598.3443709,
12755.1655629,4699.27152318}),
speeds_rpm = {0, 1890, 2190, 2650});
end TopS30slash5;
Buildings.Fluid.Movers.Data.Pumps.Wilo.TopS40slash10
Pump data for a staged Wilo-Top-S 40/10 pump
Information
Data from: http://productfinder.wilo.com/en/COM/product/000000120001ad890001003a/fc_product_datasheet
See Buildings.Fluid.Movers.Data.Pumps.Wilo.Stratos25slash1to6 for more information about how the data is derived.
Extends from Generic (Generic data record for movers).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Power computation | |||
| Boolean | use_powerCharacteristic | true | Use power data instead of motor efficiency |
| efficiencyParameters | hydraulicEfficiency | Hydraulic efficiency (used if use_powerCharacteristic=false) | |
| efficiencyParameters | motorEfficiency | Electric motor efficiency (used if use_powerCharacteristic=false) | |
| Motor heat rejection | |||
| Boolean | motorCooledByFluid | true | If true, then motor heat is added to fluid stream |
| Normalized speeds (used in model, default values assigned from speeds in rpm) | |||
| Real | speed_nominal | 1 | Nominal rotational speed for flow characteristic [1] |
| Real | constantSpeed | constantSpeed_rpm/speed_rpm_... | Normalized speed set point, used if inputType = Buildings.Fluid.Types.InputType.Constant [1] |
| Real | speeds[:] | speeds_rpm/speed_rpm_nominal | Vector of normalized speed set points, used if inputType = Buildings.Fluid.Types.InputType.Stages [1] |
| Speeds in RPM | |||
| AngularVelocity_rpm | speed_rpm_nominal | 2900 | Nominal rotational speed for flow characteristic [rev/min] |
| AngularVelocity_rpm | constantSpeed_rpm | speed_rpm_nominal | Speed set point, used if inputType = Buildings.Fluid.Types.InputType.Constant [rev/min] |
| AngularVelocity_rpm | speeds_rpm[:] | {0,2600,2800} | Vector of speed set points, used if inputType = Buildings.Fluid.Types.InputType.Stages [rev/min] |
Modelica definition
record TopS40slash10 "Pump data for a staged Wilo-Top-S 40/10 pump"
extends Generic(
speed_rpm_nominal=2900,
use_powerCharacteristic = true,
power(V_flow={2.29252636405e-05,0.00110041265475,0.00221610881858,
0.00334708849152,0.00417239798258,0.0048448723827,
0.00537979520098,0.00605991135565,0.00625859697387},
P={432.950095719,492.916811695,565.94308364,630.111524164,
658.215613383,671.6839839,676.925957128,671.543363813,
668.661679135}),
pressure(V_flow={2.29252636405e-05,0.00110041265475,0.00221610881858,
0.00334708849152,0.00417239798258,0.0048448723827,
0.00537979520098,0.00605991135565,0.00625859697387},
dp={98785.5232361,97106.6860151,91320.1257409,79370.6856694,
66042.1923274,53051.3974809,40227.5679296,25353.7625039,
20566.1680722}),
speeds_rpm = {0, 2600, 2800});
end TopS40slash10;
Buildings.Fluid.Movers.Data.Pumps.Wilo.TopS40slash7
Pump data for a staged Wilo-Top-S 40/7 pump
Information
Data from: http://productfinder.wilo.com/en/COM/product/000000120001ad1f0001003a/fc_product_datasheet
See Buildings.Fluid.Movers.Data.Pumps.Wilo.Stratos25slash1to6 for more information about how the data is derived.
Extends from Generic (Generic data record for movers).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Power computation | |||
| Boolean | use_powerCharacteristic | true | Use power data instead of motor efficiency |
| efficiencyParameters | hydraulicEfficiency | Hydraulic efficiency (used if use_powerCharacteristic=false) | |
| efficiencyParameters | motorEfficiency | Electric motor efficiency (used if use_powerCharacteristic=false) | |
| Motor heat rejection | |||
| Boolean | motorCooledByFluid | true | If true, then motor heat is added to fluid stream |
| Normalized speeds (used in model, default values assigned from speeds in rpm) | |||
| Real | speed_nominal | 1 | Nominal rotational speed for flow characteristic [1] |
| Real | constantSpeed | constantSpeed_rpm/speed_rpm_... | Normalized speed set point, used if inputType = Buildings.Fluid.Types.InputType.Constant [1] |
| Real | speeds[:] | speeds_rpm/speed_rpm_nominal | Vector of normalized speed set points, used if inputType = Buildings.Fluid.Types.InputType.Stages [1] |
| Speeds in RPM | |||
| AngularVelocity_rpm | speed_rpm_nominal | 2800 | Nominal rotational speed for flow characteristic [rev/min] |
| AngularVelocity_rpm | constantSpeed_rpm | speed_rpm_nominal | Speed set point, used if inputType = Buildings.Fluid.Types.InputType.Constant [rev/min] |
| AngularVelocity_rpm | speeds_rpm[:] | {0,2200,2450,2650} | Vector of speed set points, used if inputType = Buildings.Fluid.Types.InputType.Stages [rev/min] |
Modelica definition
record TopS40slash7 "Pump data for a staged Wilo-Top-S 40/7 pump"
extends Generic(
speed_rpm_nominal=2800,
use_powerCharacteristic = true,
power(V_flow={9.97406742472e-07,0.000621384400559,0.00113006183922,
0.00162078595651,0.00206961899062,0.00244663873928,
0.0029074406543,0.00330241372432,0.00375723119888,
0.00418212647117,0.00466686614802},
P={254.806788065,282.40881459,303.06122449,330.952380952,
347.819548872,360.093167702,372.657450077,380.261136713,
386.328725038,390.607012036,391.047619048}),
pressure(V_flow={9.97406742472e-07,0.000621384400559,0.00113006183922,0.00162078595651,
0.00206961899062,0.00244663873928,0.0029074406543,0.00330241372432,
0.00375723119888,0.00418212647117,0.00466686614802},
dp={70951.3953488,69946.0659263,67225.7989228,63706.4291679,
59843.4165588,54951.3185253,48807.3201536,42775.1388251,
34577.6798464,26835.4759718,17270.2037493}),
speeds_rpm = {0, 2200, 2450, 2650});
end TopS40slash7;
Buildings.Fluid.Movers.Data.Pumps.Wilo.VeroLine50slash150dash4slash2
Pump data for a Wilo Veroline IP-E 50/150-4/2 pump
Information
See Buildings.Fluid.Movers.Data.Pumps.Wilo.Stratos25slash1to6for more information about how the data is derived.
Extends from Generic (Generic data record for movers).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Power computation | |||
| Boolean | use_powerCharacteristic | true | Use power data instead of motor efficiency |
| efficiencyParameters | hydraulicEfficiency | Hydraulic efficiency (used if use_powerCharacteristic=false) | |
| efficiencyParameters | motorEfficiency | Electric motor efficiency (used if use_powerCharacteristic=false) | |
| Motor heat rejection | |||
| Boolean | motorCooledByFluid | true | If true, then motor heat is added to fluid stream |
| Normalized speeds (used in model, default values assigned from speeds in rpm) | |||
| Real | speed_nominal | 1 | Nominal rotational speed for flow characteristic [1] |
| Real | constantSpeed | constantSpeed_rpm/speed_rpm_... | Normalized speed set point, used if inputType = Buildings.Fluid.Types.InputType.Constant [1] |
| Real | speeds[:] | speeds_rpm/speed_rpm_nominal | Vector of normalized speed set points, used if inputType = Buildings.Fluid.Types.InputType.Stages [1] |
| Speeds in RPM | |||
| AngularVelocity_rpm | speed_rpm_nominal | 2900 | Nominal rotational speed for flow characteristic [rev/min] |
| AngularVelocity_rpm | constantSpeed_rpm | speed_rpm_nominal | Speed set point, used if inputType = Buildings.Fluid.Types.InputType.Constant [rev/min] |
| AngularVelocity_rpm | speeds_rpm[:] | {speed_rpm_nominal} | Vector of speed set points, used if inputType = Buildings.Fluid.Types.InputType.Stages [rev/min] |
Modelica definition
record VeroLine50slash150dash4slash2
"Pump data for a Wilo Veroline IP-E 50/150-4/2 pump"
extends Generic(
speed_rpm_nominal=2900,
use_powerCharacteristic=true,
power(V_flow={0.0,0.00277777, 0.00555555, 0.00833333, 0.01111111, 0.01388888, 0.01666666}, P={1607.8, 2235.3, 2862.7, 3529.4, 4078.4, 4392.2, 4666.7}),
pressure(V_flow={0.0,0.00277777, 0.00555555, 0.00833333, 0.01111111, 0.01388888, 0.01666666}, dp={255400, 253000, 250600, 248200, 232010, 199640, 156470}),
motorCooledByFluid=true);
end VeroLine50slash150dash4slash2;
Buildings.Fluid.Movers.Data.Pumps.Wilo.VeroLine80slash115dash2comma2slash2
Pump data for a Wilo Veroline IP-E 80/115-2,2/2 pump
Information
See Buildings.Fluid.Movers.Data.Pumps.Wilo.Stratos25slash1to6 for more information about how the data is derived.
Extends from Generic (Generic data record for movers).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Power computation | |||
| Boolean | use_powerCharacteristic | true | Use power data instead of motor efficiency |
| efficiencyParameters | hydraulicEfficiency | Hydraulic efficiency (used if use_powerCharacteristic=false) | |
| efficiencyParameters | motorEfficiency | Electric motor efficiency (used if use_powerCharacteristic=false) | |
| Motor heat rejection | |||
| Boolean | motorCooledByFluid | true | If true, then motor heat is added to fluid stream |
| Normalized speeds (used in model, default values assigned from speeds in rpm) | |||
| Real | speed_nominal | 1 | Nominal rotational speed for flow characteristic [1] |
| Real | constantSpeed | constantSpeed_rpm/speed_rpm_... | Normalized speed set point, used if inputType = Buildings.Fluid.Types.InputType.Constant [1] |
| Real | speeds[:] | speeds_rpm/speed_rpm_nominal | Vector of normalized speed set points, used if inputType = Buildings.Fluid.Types.InputType.Stages [1] |
| Speeds in RPM | |||
| AngularVelocity_rpm | speed_rpm_nominal | 2900 | Nominal rotational speed for flow characteristic [rev/min] |
| AngularVelocity_rpm | constantSpeed_rpm | speed_rpm_nominal | Speed set point, used if inputType = Buildings.Fluid.Types.InputType.Constant [rev/min] |
| AngularVelocity_rpm | speeds_rpm[:] | {speed_rpm_nominal} | Vector of speed set points, used if inputType = Buildings.Fluid.Types.InputType.Stages [rev/min] |
Modelica definition
record VeroLine80slash115dash2comma2slash2
"Pump data for a Wilo Veroline IP-E 80/115-2,2/2 pump"
extends Generic(
speed_rpm_nominal=2900,
use_powerCharacteristic=true,
power(V_flow={0.0,0.00381944444444,0.00770833333333,0.0111111111111,0.014375,0.0171527777778,0.0197916666667,0.0220138888889}, P={1712.23021583,1939.82995422,2319.7768316,2599.92683819,2775.17985612,2815.09529219,2709.57970466,2571.61543492}),
pressure(V_flow={0.0,0.00381944444444,0.00770833333333,0.0111111111111,0.014375,0.0171527777778,0.0197916666667,0.0220138888889}, dp={157548.6,150053.76,139302.0,127431.9,113011.2,97943.04,76596.48,57133.44}),
motorCooledByFluid=true);
end VeroLine80slash115dash2comma2slash2;