Buildings.Controls.OBC.CDL.Integers.Validation
Collection of models that validate the integer blocks of the CDL
Information
This package contains models that validate the blocks in Buildings.Controls.OBC.CDL.Integers.
The examples plot various outputs, which have been verified against analytical solutions. These model outputs are stored as reference data to allow continuous validation whenever models in the library change.
Package Content
| Name | Description |
|---|---|
 Abs
|
Validation model for the absolute block |
| Add
|
Validation model for the Add block |
| Change
|
Validation model for the Change block |
| Equal
|
Validation model for the Equal block |
| Greater
|
Validation model for the Greater block |
| GreaterEqual
|
Validation model for the GreaterEqual block |
| GreaterEqualThreshold
|
Validation model for the GreaterEqualThreshold block |
| GreaterThreshold
|
Validation model for the GreaterThreshold block |
| Less
|
Validation model for the Less block |
| LessEqual
|
Validation model for the LessEqual block |
| LessEqualThreshold
|
Validation model for the LessEqualThreshold block |
| LessThreshold
|
Validation model for the LessThreshold block |
| Max
|
Validation model for the Max block |
| Min
|
Validation model for the Min block |
| MultiSum
|
Validation model for the block to find sum of multiple inputs |
| OnCounter
|
Validation model for the OnCounter block |
| Product
|
Validation model for the Product block |
Buildings.Controls.OBC.CDL.Integers.Validation.Abs
Validation model for the absolute block
Information
Validation test for the block Buildings.Controls.OBC.CDL.Integers.Abs.
Modelica definition
model Abs "Validation model for the absolute block"
Buildings.Controls.OBC.CDL.Integers.Abs abs1
"Block that outputs the absolute value of the input";
Buildings.Controls.OBC.CDL.Continuous.Sources.Ramp ramp1(
duration=1,
offset=-3.5,
height=7.0) "Block that generates ramp signal";
Buildings.Controls.OBC.CDL.Continuous.Round round1(n=0)
"Round real number to given digits";
Buildings.Controls.OBC.CDL.Conversions.RealToInteger reaToInt
"Convert real to integer";
equation
connect(ramp1.y, round1.u);
connect(round1.y, reaToInt.u);
connect(reaToInt.y, abs1.u);
end Abs;
Buildings.Controls.OBC.CDL.Integers.Validation.Add
Validation model for the Add block
Information
Validation test for the block Buildings.Controls.OBC.CDL.Integers.Add.
Modelica definition
model Add "Validation model for the Add block"
Buildings.Controls.OBC.CDL.Integers.Add add1
"Block that outputs the sum of the two inputs";
Buildings.Controls.OBC.CDL.Continuous.Sources.Ramp ramp1(
duration=1,
offset=-3.5,
height=7.0) "Block that generates ramp signal";
Buildings.Controls.OBC.CDL.Continuous.Sources.Ramp ramp2(
duration=1,
offset=-0.5,
height=7.0) "Block that generates ramp signal";
Buildings.Controls.OBC.CDL.Continuous.Round round1(n=0)
"Round real number to given digits";
Buildings.Controls.OBC.CDL.Conversions.RealToInteger reaToInt
"Convert real to integer";
Buildings.Controls.OBC.CDL.Continuous.Round round2(n=0)
"Round real number to given digits";
Buildings.Controls.OBC.CDL.Conversions.RealToInteger reaToInt1
"Convert real to integer";
equation
connect(ramp1.y, round1.u);
connect(ramp2.y, round2.u);
connect(round2.y, reaToInt1.u);
connect(round1.y, reaToInt.u);
connect(reaToInt.y, add1.u1);
connect(reaToInt1.y, add1.u2);
end Add;
Buildings.Controls.OBC.CDL.Integers.Validation.Change
Validation model for the Change block
Information
Validation test for the block Buildings.Controls.OBC.CDL.Integers.Change.
Modelica definition
model Change "Validation model for the Change block"
Buildings.Controls.OBC.CDL.Integers.Change cha
"Check if the integer input changes value";
Buildings.Controls.OBC.CDL.Continuous.Sources.Ramp ramp2(
offset=0,
height=20,
duration=1) "Block that generates ramp signal";
Buildings.Controls.OBC.CDL.Discrete.TriggeredSampler changeSampler
"Triggered sampler";
Buildings.Controls.OBC.CDL.Conversions.RealToInteger reaToInt
"Convert real to integer";
Buildings.Controls.OBC.CDL.Continuous.Sources.TimeTable timTabLin(
smoothness=Buildings.Controls.OBC.CDL.Types.Smoothness.ConstantSegments,
table=[0,-1;0.3,0.5; 0.5,0; 0.7,1; 1,0])
"Time table with smoothness method of constant segments";
Buildings.Controls.OBC.CDL.Discrete.TriggeredSampler increaseSampler
"Increase sampler";
Buildings.Controls.OBC.CDL.Discrete.TriggeredSampler decreaseSampler
"Decrease sampler";
equation
connect(ramp2.y, changeSampler.u);
connect(timTabLin.y[1], reaToInt.u);
connect(reaToInt.y, cha.u);
connect(ramp2.y, increaseSampler.u);
connect(ramp2.y, decreaseSampler.u);
connect(cha.up, increaseSampler.trigger);
connect(cha.y, changeSampler.trigger);
connect(cha.down, decreaseSampler.trigger);
end Change;
Buildings.Controls.OBC.CDL.Integers.Validation.Equal
Validation model for the Equal block
Information
Validation test for the block Buildings.Controls.OBC.CDL.Integers.Equal.
Modelica definition
model Equal "Validation model for the Equal block"
Buildings.Controls.OBC.CDL.Integers.Equal intEqu
"Block output true if input 1 is equal to input 2";
Buildings.Controls.OBC.CDL.Conversions.RealToInteger reaToInt
"Convert real to integer";
Buildings.Controls.OBC.CDL.Conversions.RealToInteger reaToInt1
"Convert real to integer";
Buildings.Controls.OBC.CDL.Continuous.Sources.TimeTable timTabLin(smoothness=
Buildings.Controls.OBC.CDL.Types.Smoothness.ConstantSegments, table=[0,0;
0.3,1; 0.5,0; 0.7,1; 1,0])
"Time table with smoothness method of constant segments";
Buildings.Controls.OBC.CDL.Continuous.Sources.TimeTable timTabLin1(smoothness=
Buildings.Controls.OBC.CDL.Types.Smoothness.ConstantSegments, table=[0,0;
0.35,1; 0.55,0; 0.7,1; 1,0])
"Time table with smoothness method of constant segments";
equation
connect(reaToInt.y, intEqu.u1);
connect(reaToInt1.y, intEqu.u2);
connect(timTabLin.y[1], reaToInt.u);
connect(timTabLin1.y[1], reaToInt1.u);
end Equal;
Buildings.Controls.OBC.CDL.Integers.Validation.Greater
Validation model for the Greater block
Information
Validation test for the block Buildings.Controls.OBC.CDL.Integers.Greater.
Modelica definition
model Greater "Validation model for the Greater block"
Buildings.Controls.OBC.CDL.Continuous.Sources.Ramp ramp1(
duration=1,
offset=-3.5,
height=10.0) "Block that generates ramp signal";
Buildings.Controls.OBC.CDL.Continuous.Sources.Ramp ramp2(
duration=1,
offset=-1.5,
height=5.0) "Block that generates ramp signal";
Buildings.Controls.OBC.CDL.Integers.Greater intGre
"Block output true if input 1 is greater than input 2";
Buildings.Controls.OBC.CDL.Continuous.Round round1(n=0)
"Round real number to given digits";
Buildings.Controls.OBC.CDL.Conversions.RealToInteger reaToInt
"Convert real to integer";
Buildings.Controls.OBC.CDL.Continuous.Round round2(n=0)
"Round real number to given digits";
Buildings.Controls.OBC.CDL.Conversions.RealToInteger reaToInt1
"Convert real to integer";
equation
connect(ramp1.y, round1.u);
connect(ramp2.y, round2.u);
connect(round1.y, reaToInt.u);
connect(round2.y, reaToInt1.u);
connect(reaToInt.y, intGre.u1);
connect(reaToInt1.y, intGre.u2);
end Greater;
Buildings.Controls.OBC.CDL.Integers.Validation.GreaterEqual
Validation model for the GreaterEqual block
Information
Validation test for the block Buildings.Controls.OBC.CDL.Integers.GreaterEqual.
Modelica definition
model GreaterEqual "Validation model for the GreaterEqual block"
Buildings.Controls.OBC.CDL.Integers.GreaterEqual intGreEqu
"Block output true if input 1 is greater or equal to input 2";
Buildings.Controls.OBC.CDL.Conversions.RealToInteger reaToInt
"Convert real to integer";
Buildings.Controls.OBC.CDL.Conversions.RealToInteger reaToInt1
"Convert real to integer";
Buildings.Controls.OBC.CDL.Continuous.Sources.TimeTable timTabLin(smoothness=
Buildings.Controls.OBC.CDL.Types.Smoothness.ConstantSegments, table=[0,-1;
0.3,0.5; 0.5,0; 0.7,1; 1,0])
"Time table with smoothness method of constant segments";
Buildings.Controls.OBC.CDL.Continuous.Sources.TimeTable timTabLin1(smoothness=
Buildings.Controls.OBC.CDL.Types.Smoothness.ConstantSegments, table=[0,0;
0.35,1; 0.55,0; 0.7,1; 1,0])
"Time table with smoothness method of constant segments";
equation
connect(reaToInt.y, intGreEqu.u1);
connect(reaToInt1.y, intGreEqu.u2);
connect(timTabLin.y[1], reaToInt.u);
connect(timTabLin1.y[1], reaToInt1.u);
end GreaterEqual;
Buildings.Controls.OBC.CDL.Integers.Validation.GreaterEqualThreshold
Validation model for the GreaterEqualThreshold block
Information
Validation test for the block Buildings.Controls.OBC.CDL.Integers.GreaterEqualThreshold.
Modelica definition
model GreaterEqualThreshold "Validation model for the GreaterEqualThreshold block"
Buildings.Controls.OBC.CDL.Continuous.Sources.Ramp ramp1(
duration=1,
offset=-3.5,
height=10.0) "Block that generates ramp signal";
Buildings.Controls.OBC.CDL.Integers.GreaterEqualThreshold intGreEquThr(
threshold=2) "Block output true if input is greater or equal to threshold value";
Buildings.Controls.OBC.CDL.Continuous.Round round1(n=0)
"Round real number to given digits";
Buildings.Controls.OBC.CDL.Conversions.RealToInteger reaToInt
"Convert real to integer";
equation
connect(ramp1.y, round1.u);
connect(round1.y, reaToInt.u);
connect(reaToInt.y, intGreEquThr.u);
end GreaterEqualThreshold;
Buildings.Controls.OBC.CDL.Integers.Validation.GreaterThreshold
Validation model for the GreaterThreshold block
Information
Validation test for the block Buildings.Controls.OBC.CDL.Integers.GreaterThreshold.
Modelica definition
model GreaterThreshold "Validation model for the GreaterThreshold block"
Buildings.Controls.OBC.CDL.Continuous.Sources.Ramp ramp1(
duration=1,
offset=-3.5,
height=10.0) "Block that generates ramp signal";
Buildings.Controls.OBC.CDL.Integers.GreaterThreshold intGreThr(
threshold=2)
"Block output true if input is greater than threshold value";
Buildings.Controls.OBC.CDL.Continuous.Round round1(n=0)
"Round real number to given digits";
Buildings.Controls.OBC.CDL.Conversions.RealToInteger reaToInt
"Convert real to integer";
equation
connect(ramp1.y, round1.u);
connect(round1.y, reaToInt.u);
connect(reaToInt.y, intGreThr.u);
end GreaterThreshold;
Buildings.Controls.OBC.CDL.Integers.Validation.Less
Validation model for the Less block
Information
Validation test for the block Buildings.Controls.OBC.CDL.Integers.Less.
Modelica definition
model Less "Validation model for the Less block"
Buildings.Controls.OBC.CDL.Integers.Less intLes
"Block output true if input 1 is less than input 2";
Buildings.Controls.OBC.CDL.Conversions.RealToInteger reaToInt
"Convert real to integer";
Buildings.Controls.OBC.CDL.Conversions.RealToInteger reaToInt1
"Convert real to integer";
Buildings.Controls.OBC.CDL.Continuous.Sources.TimeTable timTabLin(smoothness=
Buildings.Controls.OBC.CDL.Types.Smoothness.ConstantSegments, table=[0,-1;
0.3,0.5; 0.5,0; 0.7,1; 1,0])
"Time table with smoothness method of constant segments";
Buildings.Controls.OBC.CDL.Continuous.Sources.TimeTable timTabLin1(smoothness=
Buildings.Controls.OBC.CDL.Types.Smoothness.ConstantSegments, table=[0,0;
0.35,1; 0.55,0; 0.7,1; 1,0])
"Time table with smoothness method of constant segments";
equation
connect(reaToInt1.y, intLes.u2);
connect(reaToInt.y, intLes.u1);
connect(timTabLin.y[1], reaToInt.u);
connect(timTabLin1.y[1], reaToInt1.u);
end Less;
Buildings.Controls.OBC.CDL.Integers.Validation.LessEqual
Validation model for the LessEqual block
Information
Validation test for the block Buildings.Controls.OBC.CDL.Integers.LessEqual.
Modelica definition
model LessEqual "Validation model for the LessEqual block"
Buildings.Controls.OBC.CDL.Continuous.Sources.Ramp ramp1(
duration=1,
offset=-3.5,
height=10.0) "Block that generates ramp signal";
Buildings.Controls.OBC.CDL.Continuous.Sources.Ramp ramp2(
duration=1,
offset=-1.5,
height=5.0) "Block that generates ramp signal";
Buildings.Controls.OBC.CDL.Integers.LessEqual intLesEqu
"Block output true if input 1 is less or equal to input 2";
Buildings.Controls.OBC.CDL.Continuous.Round round1(n=0)
"Round real number to given digits";
Buildings.Controls.OBC.CDL.Conversions.RealToInteger reaToInt
"Convert real to integer";
Buildings.Controls.OBC.CDL.Continuous.Round round2(n=0)
"Round real number to given digits";
Buildings.Controls.OBC.CDL.Conversions.RealToInteger reaToInt1
"Convert real to integer";
equation
connect(ramp1.y, round1.u);
connect(ramp2.y, round2.u);
connect(round1.y, reaToInt.u);
connect(round2.y, reaToInt1.u);
connect(reaToInt1.y, intLesEqu.u2);
connect(reaToInt.y, intLesEqu.u1);
end LessEqual;
Buildings.Controls.OBC.CDL.Integers.Validation.LessEqualThreshold
Validation model for the LessEqualThreshold block
Information
Validation test for the block Buildings.Controls.OBC.CDL.Integers.LessEqualThreshold.
Modelica definition
model LessEqualThreshold "Validation model for the LessEqualThreshold block"
Buildings.Controls.OBC.CDL.Continuous.Sources.Ramp ramp1(
duration=1,
offset=-3.5,
height=10.0) "Block that generates ramp signal";
Buildings.Controls.OBC.CDL.Integers.LessEqualThreshold intLesEquThr(
threshold=2)
"Block output true if input is less or equal to threshold value";
Buildings.Controls.OBC.CDL.Continuous.Round round1(n=0)
"Round real number to given digits";
Buildings.Controls.OBC.CDL.Conversions.RealToInteger reaToInt
"Convert real to integer";
equation
connect(ramp1.y, round1.u);
connect(round1.y, reaToInt.u);
connect(reaToInt.y, intLesEquThr.u);
end LessEqualThreshold;
Buildings.Controls.OBC.CDL.Integers.Validation.LessThreshold
Validation model for the LessThreshold block
Information
Validation test for the block Buildings.Controls.OBC.CDL.Integers.LessThreshold.
Modelica definition
model LessThreshold "Validation model for the LessThreshold block"
Buildings.Controls.OBC.CDL.Continuous.Sources.Ramp ramp1(
duration=1,
offset=-3.5,
height=10.0) "Block that generates ramp signal";
Buildings.Controls.OBC.CDL.Integers.LessThreshold intLesThr(
threshold=2) "Block output true if input is less than threshold value";
Buildings.Controls.OBC.CDL.Continuous.Round round1(n=0)
"Round real number to given digits";
Buildings.Controls.OBC.CDL.Conversions.RealToInteger reaToInt
"Convert real to integer";
equation
connect(ramp1.y, round1.u);
connect(round1.y, reaToInt.u);
connect(reaToInt.y, intLesThr.u);
end LessThreshold;
Buildings.Controls.OBC.CDL.Integers.Validation.Max
Validation model for the Max block
Information
Validation test for the block Buildings.Controls.OBC.CDL.Integers.Max.
Modelica definition
model Max "Validation model for the Max block"
Buildings.Controls.OBC.CDL.Integers.Max max1
"Block that outputs the largest inputs";
Buildings.Controls.OBC.CDL.Continuous.Sources.Ramp ramp1(
duration=1,
offset=-3.5,
height=10.0) "Block that generates ramp signal";
Buildings.Controls.OBC.CDL.Continuous.Sources.Ramp ramp2(
duration=1,
offset=-1.5,
height=5.0) "Block that generates ramp signal";
Buildings.Controls.OBC.CDL.Continuous.Round round1(n=0)
"Round real number to given digits";
Buildings.Controls.OBC.CDL.Conversions.RealToInteger reaToInt
"Convert real to integer";
Buildings.Controls.OBC.CDL.Continuous.Round round2(n=0)
"Round real number to given digits";
Buildings.Controls.OBC.CDL.Conversions.RealToInteger reaToInt1
"Convert real to integer";
equation
connect(ramp1.y, round1.u);
connect(round1.y, reaToInt.u);
connect(ramp2.y, round2.u);
connect(round2.y, reaToInt1.u);
connect(reaToInt1.y, max1.u2);
connect(reaToInt.y, max1.u1);
end Max;
Buildings.Controls.OBC.CDL.Integers.Validation.Min
Validation model for the Min block
Information
Validation test for the block Buildings.Controls.OBC.CDL.Integers.Min.
Modelica definition
model Min "Validation model for the Min block"
Buildings.Controls.OBC.CDL.Integers.Min min1
"Block that outputs the smallest inputs";
Buildings.Controls.OBC.CDL.Continuous.Sources.Ramp ramp1(
duration=1,
offset=-3.5,
height=10.0) "Block that generates ramp signal";
Buildings.Controls.OBC.CDL.Continuous.Sources.Ramp ramp2(
duration=1,
offset=-1.5,
height=5.0) "Block that generates ramp signal";
Buildings.Controls.OBC.CDL.Continuous.Round round1(n=0)
"Round real number to given digits";
Buildings.Controls.OBC.CDL.Conversions.RealToInteger reaToInt
"Convert real to integer";
Buildings.Controls.OBC.CDL.Continuous.Round round2(n=0)
"Round real number to given digits";
Buildings.Controls.OBC.CDL.Conversions.RealToInteger reaToInt1
"Convert real to integer";
equation
connect(ramp1.y, round1.u);
connect(round1.y, reaToInt.u);
connect(reaToInt.y, min1.u1);
connect(ramp2.y, round2.u);
connect(round2.y, reaToInt1.u);
connect(reaToInt1.y, min1.u2);
end Min;
Buildings.Controls.OBC.CDL.Integers.Validation.MultiSum
Validation model for the block to find sum of multiple inputs
Information
Validation test for the block Buildings.Controls.OBC.CDL.Integers.MultiSum.
Modelica definition
model MultiSum "Validation model for the block to find sum of multiple inputs"
Buildings.Controls.OBC.CDL.Integers.MultiSum add1(nin=3)
"Block that outputs the sum of the inputs";
Buildings.Controls.OBC.CDL.Continuous.Sources.Ramp ramp1(
duration=1,
offset=-3.5,
height=7.0) "Block that generates ramp signal";
Buildings.Controls.OBC.CDL.Continuous.Sources.Ramp ramp2(
duration=1,
offset=-0.5,
height=7.0) "Block that generates ramp signal";
Buildings.Controls.OBC.CDL.Continuous.Sources.Ramp ramp3(
duration=1,
height=7.0,
offset=-1.5)
"Block that generates ramp signal";
Buildings.Controls.OBC.CDL.Continuous.Round round1(n=0)
"Round real number to given digits";
Buildings.Controls.OBC.CDL.Conversions.RealToInteger reaToInt
"Convert real to integer";
Buildings.Controls.OBC.CDL.Continuous.Round round2(n=0)
"Round real number to given digits";
Buildings.Controls.OBC.CDL.Conversions.RealToInteger reaToInt1
"Convert real to integer";
Buildings.Controls.OBC.CDL.Continuous.Round round3(n=0)
"Round real number to given digits";
Buildings.Controls.OBC.CDL.Conversions.RealToInteger reaToInt2
"Convert real to integer";
equation
connect(ramp1.y, round1.u);
connect(ramp2.y, round2.u);
connect(ramp3.y, round3.u);
connect(round3.y, reaToInt2.u);
connect(round2.y, reaToInt1.u);
connect(round1.y, reaToInt.u);
connect(reaToInt.y, add1.u[1]);
connect(reaToInt1.y, add1.u[2]);
connect(reaToInt2.y, add1.u[3]);
end MultiSum;
Buildings.Controls.OBC.CDL.Integers.Validation.OnCounter
Validation model for the OnCounter block
Information
Validation test for the block Buildings.Controls.OBC.CDL.Integers.OnCounter.
Modelica definition
model OnCounter "Validation model for the OnCounter block"
Buildings.Controls.OBC.CDL.Integers.OnCounter onCounter
"Block that outputs increment if the input switches to true";
Buildings.Controls.OBC.CDL.Logical.Sources.Pulse booPul(
width=0.5, period=0.1) "Block that outputs cyclic on and off";
Buildings.Controls.OBC.CDL.Logical.Sources.Pulse reset(
width=0.5, period=1.0) "Block that outputs cyclic on and off";
equation
connect(reset.y, onCounter.reset);
connect(booPul.y, onCounter.trigger);
end OnCounter;
Buildings.Controls.OBC.CDL.Integers.Validation.Product
Validation model for the Product block
Information
Validation test for the block Buildings.Controls.OBC.CDL.Integers.Product.
Modelica definition
model Product "Validation model for the Product block"
Buildings.Controls.OBC.CDL.Integers.Product product
"Block that outputs the sum of the two inputs";
Buildings.Controls.OBC.CDL.Conversions.RealToInteger reaToInt1
"Convert real to integer";
Buildings.Controls.OBC.CDL.Conversions.RealToInteger reaToInt2
"Convert real to integer";
Buildings.Controls.OBC.CDL.Continuous.Sources.TimeTable timTabLin(smoothness=
Buildings.Controls.OBC.CDL.Types.Smoothness.ConstantSegments, table=[0,-1;
0.3,0.5; 0.5,0; 0.7,1; 1,0])
"Time table with smoothness method of constant segments";
Buildings.Controls.OBC.CDL.Continuous.Sources.TimeTable timTabLin1(smoothness=
Buildings.Controls.OBC.CDL.Types.Smoothness.ConstantSegments, table=[0,0;
0.35,1; 0.55,0; 0.7,1; 1,0])
"Time table with smoothness method of constant segments";
equation
connect(reaToInt1.y, product.u1);
connect(reaToInt2.y, product.u2);
connect(timTabLin.y[1], reaToInt1.u);
connect(timTabLin1.y[1], reaToInt2.u);
end Product;