Buildings.ThermalZones.Detailed.Validation.BESTEST.BaseClasses

Package with base classes for Buildings.ThermalZones.Detailed.Validation.BESTEST

Information

This package contains base classes that are used to construct the models in Buildings.ThermalZones.Detailed.Validation.BESTEST.

Extends from Modelica.Icons.BasesPackage (Icon for packages containing base classes).

Package Content

Name Description
Buildings.ThermalZones.Detailed.Validation.BESTEST.BaseClasses.DaySchedule DaySchedule Schedule that repeats every day

Buildings.ThermalZones.Detailed.Validation.BESTEST.BaseClasses.DaySchedule Buildings.ThermalZones.Detailed.Validation.BESTEST.BaseClasses.DaySchedule

Schedule that repeats every day

Buildings.ThermalZones.Detailed.Validation.BESTEST.BaseClasses.DaySchedule

Information

Time schedule that is used for set points.

Extends from Buildings.Controls.OBC.CDL.Continuous.Sources.TimeTable (Table look-up with respect to time and linear or periodic extrapolation).

Parameters

TypeNameDefaultDescription
Realtable[:, :] Table matrix (time = first column is time in seconds, unless timeScale <> 1)
SmoothnesssmoothnessBuildings.Controls.OBC.CDL.T...Smoothness of table interpolation
ExtrapolationextrapolationBuildings.Controls.OBC.CDL.T...Extrapolation of data outside the definition range
Realoffset[:]fill(0, size(table, 2) - 1)Offsets of output signals
TimetimeScale1Time scale of first table column. Set to 3600 if time in table is in hours [s]

Connectors

TypeNameDescription
output RealOutputy[nout]Output of the table

Modelica definition

model DaySchedule "Schedule that repeats every day" extends Buildings.Controls.OBC.CDL.Continuous.Sources.TimeTable( final smoothness=Buildings.Controls.OBC.CDL.Types.Smoothness.LinearSegments, final extrapolation=Buildings.Controls.OBC.CDL.Types.Extrapolation.Periodic, final offset=fill(0, size(table, 2)-1)); end DaySchedule;