Buildings.Fluid.SolarCollectors.Data.Concentrating

Package with SRCC rating information for concentrating solar thermal collectors

Information

Package containing data for concentrating solar collectors. All models in the Concentraing package use EN12975 test data.

Extends from Modelica.Icons.MaterialPropertiesPackage (Icon for package containing property classes).

Package Content

Name	Description
C_CogenraSunDeck	C - Cogenra Solar, Inc., SunDeck 1.0
C_VerificationModel	C - All inputs necessary for verification of EN12975 models

Buildings.Fluid.SolarCollectors.Data.Concentrating.C_CogenraSunDeck

C - Cogenra Solar, Inc., SunDeck 1.0

Information

Necessary data for calculating dp_nominal, G_nominal and dT_nominal is not provided in the EN12975 test data. All are left blank.

References

Ratings data taken from the Solar Rating and Certification Corporation website. SRCC# = 2011127A.

Extends from SolarCollectors.Data.GenericSolarCollector (Generic data record providing inputs for specific collector data records).

Parameters

Type	Name	Default	Description
Area	ATyp	Types.Area.Aperture	Gross or aperture area
Area	A	4.302	Area [m2]
Mass	mDry	484	Dry weight [kg]
Volume	V	4.4/1000	Fluid volume [m3]
PressureDifference	dp_nominal		Pressure drop during test conditions [Pa]
Real	mperA_flow_nominal	0.0241	Mass flow rate per unit area of collector [kg/(s.m2)]
Real	B0	0	1st incident angle modifier coefficient
Real	B1	0	2nd incident angle modifier coefficient
Real	y_intercept	0.720	Y intercept (Maximum efficiency)
Real	slope	0	Slope from rating data [W/(m2.K)]
Real	IAMDiff	0.133	Incidence angle modifier from EN12975 ratings data
Real	C1	2.8312	Heat loss coefficient from EN12975 ratings data
Real	C2	0.00119	Temperature dependence of heat loss from EN12975 ratings data
Irradiance	G_nominal		Nominal solar irradiance specified in ratings data [W/m2]
TemperatureDifference	dT_nominal		Nominal temperature difference specified in ratings data [K]

Modelica definition

record C_CogenraSunDeck = SolarCollectors.Data.GenericSolarCollector ( final ATyp=Types.Area.Aperture, final A=4.302, final V=4.4/1000, final mperA_flow_nominal=0.0241, final y_intercept=0.720, final IAMDiff=0.133, final C1=2.8312, final C2=0.00119, final B0=0, final B1=0, final mDry=484, final slope=0) "C - Cogenra Solar, Inc., SunDeck 1.0";

Buildings.Fluid.SolarCollectors.Data.Concentrating.C_VerificationModel

C - All inputs necessary for verification of EN12975 models

Information

No model on the Solar Rating and Certification Corporation website tested to EN12975 standards provides all of the necessary information for modeling. Specific limitations are dp_nominal, G_nominal and dT_nominal. This data record was created to allow verification of EN12975 base classes despite the limitations in available data.

Extends from SolarCollectors.Data.GenericSolarCollector (Generic data record providing inputs for specific collector data records).

Parameters

Type	Name	Default	Description
Area	ATyp	Types.Area.Aperture	Gross or aperture area
Area	A	4.302	Area [m2]
Mass	mDry	484	Dry weight [kg]
Volume	V	4.4/1000	Fluid volume [m3]
PressureDifference	dp_nominal	100	Pressure drop during test conditions [Pa]
Real	mperA_flow_nominal	0.0241	Mass flow rate per unit area of collector [kg/(s.m2)]
Real	B0	0	1st incident angle modifier coefficient
Real	B1	0	2nd incident angle modifier coefficient
Real	y_intercept	0.720	Y intercept (Maximum efficiency)
Real	slope	0	Slope from rating data [W/(m2.K)]
Real	IAMDiff	0.133	Incidence angle modifier from EN12975 ratings data
Real	C1	2.8312	Heat loss coefficient from EN12975 ratings data
Real	C2	0.00119	Temperature dependence of heat loss from EN12975 ratings data
Irradiance	G_nominal	1000	Nominal solar irradiance specified in ratings data [W/m2]
TemperatureDifference	dT_nominal	20	Nominal temperature difference specified in ratings data [K]

Modelica definition

record C_VerificationModel = SolarCollectors.Data.GenericSolarCollector ( final ATyp=Types.Area.Aperture, final A=4.302, final V=4.4/1000, final dp_nominal = 100, final mperA_flow_nominal=0.0241, final y_intercept=0.720, final IAMDiff=0.133, final C1=2.8312, final C2=0.00119, final B0=0, final B1=0, final mDry=484, final slope=0, final G_nominal = 1000, final dT_nominal = 20) "C - All inputs necessary for verification of EN12975 models";