Buildings.ThermalZones.Detailed.Validation.TestConditionalConstructions
Package with models that verify whether constructions can be conditionally removed
Information
The thermal zone model Buildings.ThermalZones.Detailed.MixedAir allows the conditional declaration of constructions for exterior walls without windows, for exterior walls with windows, for partition walls, for interior surfaces, and for interior surfaces. The models in this package test if the model is well-defined if such constructions are removed. The models in this package do not represent realistic buildings, but are rather designed to test the thermal zone model.Extends from Modelica.Icons.ExamplesPackage (Icon for packages containing runnable examples).
Package Content
| Name | Description |
|---|---|
 OnlyConstructionBoundary
|
Test model for room model |
| OnlyExteriorWallNoWindow
|
Test model for room model |
| OnlyExteriorWallWithWindow
|
Test model for room model |
| OnlyExteriorWallWithWindowExteriorShade
|
Test model for room model |
| OnlyExteriorWallWithWindowInteriorShade
|
Test model for room model |
| OnlyPartition
|
Test model for room model |
| OnlySurfaceBoundary
|
Test model for room model |
 SampledModel
|
Validation for conditional constructions but with sampled models |
 BaseClasses
|
Package with base classes for Buildings.ThermalZones.Detailed.Validation.TestConditionalConstructions |
Buildings.ThermalZones.Detailed.Validation.TestConditionalConstructions.OnlyConstructionBoundary
Test model for room model
Information
This model tests Buildings.ThermalZones.Detailed.MixedAir for the case of having only one construction whose other surface boundary condition is exposed by the room model.
Extends from Modelica.Icons.Example (Icon for runnable examples), BaseClasses.PartialTestModel (Partial model that is used to build the test cases).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Integer | nConExt | 0 | Number of exterior constructions that do not have a window |
| Integer | nConExtWin | 0 | Number of exterior constructions that do have a window |
| Integer | nConPar | 0 | Number of partition constructions |
| Integer | nConBou | 1 | Number of surface that are connected to constructions that are modeled inside the room |
| Integer | nSurBou | 0 | Number of surface that are connected to the room air volume |
| Insulation100Concrete200 | matLayExt | Construction material for exterior walls | |
| Brick120 | matLayPar | Construction material for partition walls | |
| DoubleClearAir13Clear | glaSys | Data record for the glazing system |
Modelica definition
model OnlyConstructionBoundary "Test model for room model"
extends Modelica.Icons.Example;
extends BaseClasses.PartialTestModel(
nConExt=0,
nConExtWin=0,
nConPar=0,
nConBou=1,
nSurBou=0,
roo(
datConBou(layers={matLayPar},
each A=12,
each til=Buildings.Types.Tilt.Floor,
each azi=Buildings.Types.Azimuth.W,
each stateAtSurface_a = false)));
Buildings.HeatTransfer.Sources.FixedTemperature TBou1[nConBou](each T=288.15)
"Boundary condition for construction";
equation
connect(TBou1.port, roo.surf_conBou);
end OnlyConstructionBoundary;
Buildings.ThermalZones.Detailed.Validation.TestConditionalConstructions.OnlyExteriorWallNoWindow
Test model for room model
Information
This model tests Buildings.ThermalZones.Detailed.MixedAir for the case of having only one exterior construction with no window.
Extends from Modelica.Icons.Example (Icon for runnable examples), BaseClasses.PartialTestModel (Partial model that is used to build the test cases).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Integer | nConExt | 1 | Number of exterior constructions that do not have a window |
| Integer | nConExtWin | 0 | Number of exterior constructions that do have a window |
| Integer | nConPar | 0 | Number of partition constructions |
| Integer | nConBou | 0 | Number of surface that are connected to constructions that are modeled inside the room |
| Integer | nSurBou | 0 | Number of surface that are connected to the room air volume |
| Insulation100Concrete200 | matLayExt | Construction material for exterior walls | |
| Brick120 | matLayPar | Construction material for partition walls | |
| DoubleClearAir13Clear | glaSys | Data record for the glazing system |
Modelica definition
model OnlyExteriorWallNoWindow "Test model for room model"
extends Modelica.Icons.Example;
extends BaseClasses.PartialTestModel(
nConExt=1,
nConExtWin=0,
nConPar=0,
nConBou=0,
nSurBou=0,
roo(
datConExt(layers={matLayExt}, each A=10,
each til=Buildings.Types.Tilt.Floor, each azi=Buildings.Types.Azimuth.W)));
end OnlyExteriorWallNoWindow;
Buildings.ThermalZones.Detailed.Validation.TestConditionalConstructions.OnlyExteriorWallWithWindow
Test model for room model
Information
This model tests Buildings.ThermalZones.Detailed.MixedAir for the case of having only one exterior construction with window.
Extends from Modelica.Icons.Example (Icon for runnable examples), BaseClasses.PartialTestModel (Partial model that is used to build the test cases).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Integer | nConExt | 0 | Number of exterior constructions that do not have a window |
| Integer | nConExtWin | 2 | Number of exterior constructions that do have a window |
| Integer | nConPar | 0 | Number of partition constructions |
| Integer | nConBou | 0 | Number of surface that are connected to constructions that are modeled inside the room |
| Integer | nSurBou | 0 | Number of surface that are connected to the room air volume |
| Insulation100Concrete200 | matLayExt | Construction material for exterior walls | |
| Brick120 | matLayPar | Construction material for partition walls | |
| DoubleClearAir13Clear | glaSys | Data record for the glazing system |
Modelica definition
model OnlyExteriorWallWithWindow "Test model for room model"
extends Modelica.Icons.Example;
extends BaseClasses.PartialTestModel(
nConExt=0,
nConExtWin=2,
nConPar=0,
nConBou=0,
nSurBou=0,
roo(
datConExtWin(layers={matLayExt, matLayExt},
each A=10,
glaSys={glaSys, glaSys},
each wWin=2,
each hWin=2,
each fFra=0.1,
til={Buildings.Types.Tilt.Floor, Buildings.Types.Tilt.Ceiling},
each azi=Buildings.Types.Azimuth.W)));
end OnlyExteriorWallWithWindow;
Buildings.ThermalZones.Detailed.Validation.TestConditionalConstructions.OnlyExteriorWallWithWindowExteriorShade
Test model for room model
Information
This model tests Buildings.ThermalZones.Detailed.MixedAir for the case of having only one exterior construction with window and exterior shade.
Extends from Modelica.Icons.Example (Icon for runnable examples), BaseClasses.PartialTestModel (Partial model that is used to build the test cases).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Integer | nConExt | 0 | Number of exterior constructions that do not have a window |
| Integer | nConExtWin | 2 | Number of exterior constructions that do have a window |
| Integer | nConPar | 0 | Number of partition constructions |
| Integer | nConBou | 0 | Number of surface that are connected to constructions that are modeled inside the room |
| Integer | nSurBou | 0 | Number of surface that are connected to the room air volume |
| Insulation100Concrete200 | matLayExt | Construction material for exterior walls | |
| Brick120 | matLayPar | Construction material for partition walls |
Modelica definition
model OnlyExteriorWallWithWindowExteriorShade "Test model for room model"
extends Modelica.Icons.Example;
extends BaseClasses.PartialTestModel(
nConExt=0,
nConExtWin=2,
nConPar=0,
nConBou=0,
nSurBou=0,
roo(
datConExtWin(layers={matLayExt, matLayExt}, each A=10,
glaSys={glaSys, glaSys},
each wWin=2,
each hWin=2,
each fFra=0.1,
til={Buildings.Types.Tilt.Floor, Buildings.Types.Tilt.Ceiling},
each azi=Buildings.Types.Azimuth.W)),
glaSys(haveExteriorShade=true));
Modelica.Blocks.Sources.Constant uSha(k=0.5)
"Control signal for the shading device";
Modelica.Blocks.Routing.Replicator replicator(nout=max(1,nConExtWin));
equation
connect(uSha.y,replicator. u);
connect(roo.uSha,replicator. y);
end OnlyExteriorWallWithWindowExteriorShade;
Buildings.ThermalZones.Detailed.Validation.TestConditionalConstructions.OnlyExteriorWallWithWindowInteriorShade
Test model for room model
Information
This model tests Buildings.ThermalZones.Detailed.MixedAir for the case of having only one exterior construction with window and interior shade.
Extends from Modelica.Icons.Example (Icon for runnable examples), BaseClasses.PartialTestModel (Partial model that is used to build the test cases).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Integer | nConExt | 0 | Number of exterior constructions that do not have a window |
| Integer | nConExtWin | 2 | Number of exterior constructions that do have a window |
| Integer | nConPar | 0 | Number of partition constructions |
| Integer | nConBou | 0 | Number of surface that are connected to constructions that are modeled inside the room |
| Integer | nSurBou | 0 | Number of surface that are connected to the room air volume |
| Insulation100Concrete200 | matLayExt | Construction material for exterior walls | |
| Brick120 | matLayPar | Construction material for partition walls |
Modelica definition
model OnlyExteriorWallWithWindowInteriorShade "Test model for room model"
extends Modelica.Icons.Example;
extends BaseClasses.PartialTestModel(
nConExt=0,
nConExtWin=2,
nConPar=0,
nConBou=0,
nSurBou=0,
roo(
datConExtWin(layers={matLayExt, matLayExt}, each A=10,
glaSys={glaSys, glaSys},
each wWin=2,
each hWin=2,
each fFra=0.1,
til={Buildings.Types.Tilt.Floor, Buildings.Types.Tilt.Ceiling},
each azi=Buildings.Types.Azimuth.W)),
glaSys(haveInteriorShade=true));
Modelica.Blocks.Sources.Constant uSha(k=0.5)
"Control signal for the shading device";
Modelica.Blocks.Routing.Replicator replicator(nout=max(1,nConExtWin));
equation
connect(uSha.y,replicator. u);
connect(roo.uSha,replicator. y);
end OnlyExteriorWallWithWindowInteriorShade;
Buildings.ThermalZones.Detailed.Validation.TestConditionalConstructions.OnlyPartition
Test model for room model
Information
This model tests Buildings.ThermalZones.Detailed.MixedAir for the case of having only one partition construction.
Extends from Modelica.Icons.Example (Icon for runnable examples), BaseClasses.PartialTestModel (Partial model that is used to build the test cases).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Integer | nConExt | 0 | Number of exterior constructions that do not have a window |
| Integer | nConExtWin | 0 | Number of exterior constructions that do have a window |
| Integer | nConPar | 1 | Number of partition constructions |
| Integer | nConBou | 0 | Number of surface that are connected to constructions that are modeled inside the room |
| Integer | nSurBou | 0 | Number of surface that are connected to the room air volume |
| Insulation100Concrete200 | matLayExt | Construction material for exterior walls | |
| Brick120 | matLayPar | Construction material for partition walls | |
| DoubleClearAir13Clear | glaSys | Data record for the glazing system |
Modelica definition
model OnlyPartition "Test model for room model"
extends Modelica.Icons.Example;
extends BaseClasses.PartialTestModel(
nConExt=0,
nConExtWin=0,
nConPar=1,
nConBou=0,
nSurBou=0,
roo(
datConPar(layers={matLayPar}, each A=10,
each til=Buildings.Types.Tilt.Floor,
each azi=Buildings.Types.Azimuth.W)));
end OnlyPartition;
Buildings.ThermalZones.Detailed.Validation.TestConditionalConstructions.OnlySurfaceBoundary
Test model for room model
Information
This model tests Buildings.ThermalZones.Detailed.MixedAir for the case of having only one surface with specified boundary conditions.
Extends from Modelica.Icons.Example (Icon for runnable examples), BaseClasses.PartialTestModel (Partial model that is used to build the test cases).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Integer | nConExt | 0 | Number of exterior constructions that do not have a window |
| Integer | nConExtWin | 0 | Number of exterior constructions that do have a window |
| Integer | nConPar | 0 | Number of partition constructions |
| Integer | nConBou | 0 | Number of surface that are connected to constructions that are modeled inside the room |
| Integer | nSurBou | 1 | Number of surface that are connected to the room air volume |
| Insulation100Concrete200 | matLayExt | Construction material for exterior walls | |
| Brick120 | matLayPar | Construction material for partition walls | |
| DoubleClearAir13Clear | glaSys | Data record for the glazing system |
Modelica definition
model OnlySurfaceBoundary "Test model for room model"
extends Modelica.Icons.Example;
extends BaseClasses.PartialTestModel(
nConExt=0,
nConExtWin=0,
nConPar=0,
nConBou=0,
nSurBou=1,
roo(
surBou(each A=15, each absIR=0.9, each absSol=0.9, each til=Buildings.Types.Tilt.Floor)));
Buildings.HeatTransfer.Sources.FixedTemperature TBou[nSurBou](each T=288.15)
"Boundary condition for construction";
HeatTransfer.Conduction.MultiLayer conOut[nSurBou](
each A=15,
each layers = matLayPar,
each stateAtSurface_b=false) "Construction that is modeled outside of room";
equation
connect(TBou.port, conOut.port_b);
connect(roo.surf_surBou, conOut.port_a);
end OnlySurfaceBoundary;