Buildings.ThermalZones.Detailed.FLEXLAB.Data.Constructions.OpaqueConstructions.ExteriorConstructions

Exterior walls in FLEXLAB test cells

Information

This package contains constructions defining exterior walls used in FLEXLAB test cells. The following table lists locations in FLEXLAB test cells where the constructions are used. Locations of walls in UF90XR are described assuming that the windows are facing south. Some of the constructions are combined into single packages because they are, from a thermal point of view, functionally identical.

Construction	Test Cell	Wall
Construction1	All test cells: UF90XRA: UF90XRB: UF90X1A:	North wall of the closet West exterior wall East exterior wall West exterior wall
Construction2	UF90X2:	South exterior wall
Construction3	All test cells:	North wall of electrical room
Construction5and8	UF90XRB:	North exterior and south exterior
Construction9	UF90X1:	South exterior wall
Construction10	UF90X3:	South exterior wall
Construction17and24	UF90XRA:	North exterior and south exterior

Extends from Modelica.Icons.MaterialPropertiesPackage (Icon for package containing property classes).

Package Content

Name	Description
Construction1	North wall in FLEXLAB closets, west wall in XRA, east wall in XRB, west wall in X1A
Construction10and23	South and north exterior wall in test bed X3
Construction17and24	Wall construction found in XRA
Construction2	South wall in test bed X2
Construction3	North wall of the electrical room in all test cells
Construction5and8	Wall construction found in test cell XRB
Construction9	South wall in test bed X1
ExteriorDoorInsulated	Model of an insulated exterior door
ExteriorDoorUninsulated	Model of an uninsulated exterior door

Buildings.ThermalZones.Detailed.FLEXLAB.Data.Constructions.OpaqueConstructions.ExteriorConstructions.Construction1

North wall in FLEXLAB closets, west wall in XRA, east wall in XRB, west wall in X1A

Buildings.ThermalZones.Detailed.FLEXLAB.Data.Constructions.OpaqueConstructions.ExteriorConstructions.Construction1

Information

This is a construction of an exterior wall used in some FLEXLAB test cells. It should be used in the north wall in all FLEXLAB closets, west wall in XRA, east wall in XRB and west wall in X1A.

Extends from Buildings.HeatTransfer.Data.OpaqueConstructions.Generic (Thermal properties of opaque constructions).

Parameters

Type	Name	Default	Description
Integer	nLay	5	Number of layers
Material	material[nLay]	{Buildings.HeatTransfer.Data...	Layer by layer declaration of material, starting from outside to room-side
Emissivity	absIR_a	0.9	Infrared absorptivity of surface a (usually outside-facing surface) [1]
Emissivity	absIR_b	0.9	Infrared absorptivity of surface b (usually room-facing surface) [1]
Emissivity	absSol_a	0.5	Solar absorptivity of surface a (usually outside-facing surface) [1]
Emissivity	absSol_b	0.5	Solar absorptivity of surface b (usually room-facing surface) [1]
SurfaceRoughness	roughness_a	Buildings.HeatTransfer.Types...	Exterior surface roughness
Advanced
Integer	nSta[nLay]	{material[i].nSta for i in 1...	Number of states (do not overwrite, used to work around Dymola 2017 bug)

Modelica definition

record Construction1 = Buildings.HeatTransfer.Data.OpaqueConstructions.Generic(final material={ Buildings.HeatTransfer.Data.Solids.InsulationBoard(x=0.127), Buildings.HeatTransfer.Data.Solids.Plywood(x=0.0127), Buildings.HeatTransfer.Data.Solids.InsulationBoard(x=0.2032), Buildings.HeatTransfer.Data.Solids.Plywood(x=0.0127), Buildings.HeatTransfer.Data.Solids.GypsumBoard(x=0.01588)}, final nLay = 5) "North wall in FLEXLAB closets, west wall in XRA, east wall in XRB, west wall in X1A";

Buildings.ThermalZones.Detailed.FLEXLAB.Data.Constructions.OpaqueConstructions.ExteriorConstructions.Construction10and23

South and north exterior wall in test bed X3

Buildings.ThermalZones.Detailed.FLEXLAB.Data.Constructions.OpaqueConstructions.ExteriorConstructions.Construction10and23

Information

This is a model of exterior walls in test bed X3. It is used to represent both the north and south exterior wall of the test cells themselves.

Extends from Buildings.HeatTransfer.Data.OpaqueConstructions.Generic (Thermal properties of opaque constructions).

Parameters

Type	Name	Default	Description
Integer	nLay	4	Number of layers
Material	material[nLay]	{Buildings.HeatTransfer.Data...	Layer by layer declaration of material, starting from outside to room-side
Emissivity	absIR_a	0.9	Infrared absorptivity of surface a (usually outside-facing surface) [1]
Emissivity	absIR_b	0.9	Infrared absorptivity of surface b (usually room-facing surface) [1]
Emissivity	absSol_a	0.5	Solar absorptivity of surface a (usually outside-facing surface) [1]
Emissivity	absSol_b	0.5	Solar absorptivity of surface b (usually room-facing surface) [1]
SurfaceRoughness	roughness_a	Buildings.HeatTransfer.Types...	Exterior surface roughness
Advanced
Integer	nSta[nLay]	{material[i].nSta for i in 1...	Number of states (do not overwrite, used to work around Dymola 2017 bug)

Modelica definition

record Construction10and23 = Buildings.HeatTransfer.Data.OpaqueConstructions.Generic(final material={ Buildings.HeatTransfer.Data.Solids.InsulationBoard(x=0.02413), Buildings.HeatTransfer.Data.Solids.Plywood(x=0.0127), Buildings.HeatTransfer.Data.Solids.InsulationBoard(x=0.08255), Buildings.HeatTransfer.Data.Solids.GypsumBoard(x=0.01588)}, final nLay = 4) "South and north exterior wall in test bed X3";

Buildings.ThermalZones.Detailed.FLEXLAB.Data.Constructions.OpaqueConstructions.ExteriorConstructions.Construction17and24

Wall construction found in XRA

Buildings.ThermalZones.Detailed.FLEXLAB.Data.Constructions.OpaqueConstructions.ExteriorConstructions.Construction17and24

Information

This is a model of one of the constructions used in test cell XRA. It represents the south wall, and the north wall next to the door.

Extends from Buildings.HeatTransfer.Data.OpaqueConstructions.Generic (Thermal properties of opaque constructions).

Parameters

Type	Name	Default	Description
Integer	nLay	3	Number of layers
Material	material[nLay]	{Buildings.HeatTransfer.Data...	Layer by layer declaration of material, starting from outside to room-side
Emissivity	absIR_a	0.9	Infrared absorptivity of surface a (usually outside-facing surface) [1]
Emissivity	absIR_b	0.9	Infrared absorptivity of surface b (usually room-facing surface) [1]
Emissivity	absSol_a	0.5	Solar absorptivity of surface a (usually outside-facing surface) [1]
Emissivity	absSol_b	0.5	Solar absorptivity of surface b (usually room-facing surface) [1]
SurfaceRoughness	roughness_a	Buildings.HeatTransfer.Types...	Exterior surface roughness
Advanced
Integer	nSta[nLay]	{material[i].nSta for i in 1...	Number of states (do not overwrite, used to work around Dymola 2017 bug)

Modelica definition

record Construction17and24 = Buildings.HeatTransfer.Data.OpaqueConstructions.Generic(final material={ Buildings.HeatTransfer.Data.Solids.InsulationBoard(x=0.04752), Buildings.HeatTransfer.Data.Solids.Plywood(x=0.0127), Buildings.HeatTransfer.Data.Solids.GypsumBoard(x=0.01588)}, final nLay = 3) "Wall construction found in XRA";

Buildings.ThermalZones.Detailed.FLEXLAB.Data.Constructions.OpaqueConstructions.ExteriorConstructions.Construction2

South wall in test bed X2

Buildings.ThermalZones.Detailed.FLEXLAB.Data.Constructions.OpaqueConstructions.ExteriorConstructions.Construction2

Information

This is a model of the external wall used in test bed X2.

Extends from Buildings.HeatTransfer.Data.OpaqueConstructions.Generic (Thermal properties of opaque constructions).

Parameters

Type	Name	Default	Description
Integer	nLay	3	Number of layers
Material	material[nLay]	{Buildings.HeatTransfer.Data...	Layer by layer declaration of material, starting from outside to room-side
Emissivity	absIR_a	0.9	Infrared absorptivity of surface a (usually outside-facing surface) [1]
Emissivity	absIR_b	0.9	Infrared absorptivity of surface b (usually room-facing surface) [1]
Emissivity	absSol_a	0.5	Solar absorptivity of surface a (usually outside-facing surface) [1]
Emissivity	absSol_b	0.5	Solar absorptivity of surface b (usually room-facing surface) [1]
SurfaceRoughness	roughness_a	Buildings.HeatTransfer.Types...	Exterior surface roughness
Advanced
Integer	nSta[nLay]	{material[i].nSta for i in 1...	Number of states (do not overwrite, used to work around Dymola 2017 bug)

Modelica definition

record Construction2 = Buildings.HeatTransfer.Data.OpaqueConstructions.Generic(final material={ Buildings.HeatTransfer.Data.Solids.InsulationBoard(x=0.08255), Buildings.HeatTransfer.Data.Solids.Plywood(x=0.0127), Buildings.HeatTransfer.Data.Solids.GypsumBoard(x=0.01588)}, final nLay = 3) "South wall in test bed X2";

Buildings.ThermalZones.Detailed.FLEXLAB.Data.Constructions.OpaqueConstructions.ExteriorConstructions.Construction3

North wall of the electrical room in all test cells

Buildings.ThermalZones.Detailed.FLEXLAB.Data.Constructions.OpaqueConstructions.ExteriorConstructions.Construction3

Information

This is a model of the north wall of the electrical room in all test cells.

Extends from Buildings.HeatTransfer.Data.OpaqueConstructions.Generic (Thermal properties of opaque constructions).

Parameters

Type	Name	Default	Description
Integer	nLay	4	Number of layers
Material	material[nLay]	{Buildings.HeatTransfer.Data...	Layer by layer declaration of material, starting from outside to room-side
Emissivity	absIR_a	0.9	Infrared absorptivity of surface a (usually outside-facing surface) [1]
Emissivity	absIR_b	0.9	Infrared absorptivity of surface b (usually room-facing surface) [1]
Emissivity	absSol_a	0.5	Solar absorptivity of surface a (usually outside-facing surface) [1]
Emissivity	absSol_b	0.5	Solar absorptivity of surface b (usually room-facing surface) [1]
SurfaceRoughness	roughness_a	Buildings.HeatTransfer.Types...	Exterior surface roughness
Advanced
Integer	nSta[nLay]	{material[i].nSta for i in 1...	Number of states (do not overwrite, used to work around Dymola 2017 bug)

Modelica definition

record Construction3 = Buildings.HeatTransfer.Data.OpaqueConstructions.Generic(final material={ Buildings.HeatTransfer.Data.Solids.InsulationBoard(x=0.127), Buildings.HeatTransfer.Data.Solids.Plywood(x=0.0127), Buildings.HeatTransfer.Data.Solids.InsulationBoard(x=0.2032), Buildings.HeatTransfer.Data.Solids.Plywood(x=0.03175)}, final nLay = 4) "North wall of the electrical room in all test cells";

Buildings.ThermalZones.Detailed.FLEXLAB.Data.Constructions.OpaqueConstructions.ExteriorConstructions.Construction5and8

Wall construction found in test cell XRB

Buildings.ThermalZones.Detailed.FLEXLAB.Data.Constructions.OpaqueConstructions.ExteriorConstructions.Construction5and8

Information

This is a model of an exterior wall used in test cell XRB. It is used to model both the south facing wall, and the north facing wall next to the door.

Directions are stated assuming that the windows are facing south.

Extends from Buildings.HeatTransfer.Data.OpaqueConstructions.Generic (Thermal properties of opaque constructions).

Parameters

Type	Name	Default	Description
Integer	nLay	3	Number of layers
Material	material[nLay]	{Buildings.HeatTransfer.Data...	Layer by layer declaration of material, starting from outside to room-side
Emissivity	absIR_a	0.9	Infrared absorptivity of surface a (usually outside-facing surface) [1]
Emissivity	absIR_b	0.9	Infrared absorptivity of surface b (usually room-facing surface) [1]
Emissivity	absSol_a	0.5	Solar absorptivity of surface a (usually outside-facing surface) [1]
Emissivity	absSol_b	0.5	Solar absorptivity of surface b (usually room-facing surface) [1]
SurfaceRoughness	roughness_a	Buildings.HeatTransfer.Types...	Exterior surface roughness
Advanced
Integer	nSta[nLay]	{material[i].nSta for i in 1...	Number of states (do not overwrite, used to work around Dymola 2017 bug)

Modelica definition

record Construction5and8 = Buildings.HeatTransfer.Data.OpaqueConstructions.Generic(final material={ Buildings.HeatTransfer.Data.Solids.InsulationBoard(x=0.1016), Buildings.HeatTransfer.Data.Solids.Plywood(x=0.0127), Buildings.HeatTransfer.Data.Solids.GypsumBoard(x=0.01588)}, final nLay = 3) "Wall construction found in test cell XRB";

Buildings.ThermalZones.Detailed.FLEXLAB.Data.Constructions.OpaqueConstructions.ExteriorConstructions.Construction9

South wall in test bed X1

Buildings.ThermalZones.Detailed.FLEXLAB.Data.Constructions.OpaqueConstructions.ExteriorConstructions.Construction9

Information

This is a model of the south wall in test bed X1.

Extends from Buildings.HeatTransfer.Data.OpaqueConstructions.Generic (Thermal properties of opaque constructions).

Parameters

Type	Name	Default	Description
Integer	nLay	3	Number of layers
Material	material[nLay]	{Buildings.HeatTransfer.Data...	Layer by layer declaration of material, starting from outside to room-side
Emissivity	absIR_a	0.9	Infrared absorptivity of surface a (usually outside-facing surface) [1]
Emissivity	absIR_b	0.9	Infrared absorptivity of surface b (usually room-facing surface) [1]
Emissivity	absSol_a	0.5	Solar absorptivity of surface a (usually outside-facing surface) [1]
Emissivity	absSol_b	0.5	Solar absorptivity of surface b (usually room-facing surface) [1]
SurfaceRoughness	roughness_a	Buildings.HeatTransfer.Types...	Exterior surface roughness
Advanced
Integer	nSta[nLay]	{material[i].nSta for i in 1...	Number of states (do not overwrite, used to work around Dymola 2017 bug)

Modelica definition

record Construction9 = Buildings.HeatTransfer.Data.OpaqueConstructions.Generic(final material={ Buildings.HeatTransfer.Data.Solids.Plywood(x=0.0127), Buildings.HeatTransfer.Data.Solids.InsulationBoard(x=0.06985), Buildings.HeatTransfer.Data.Solids.GypsumBoard(x=0.01588)}, final nLay = 3) "South wall in test bed X1";

Buildings.ThermalZones.Detailed.FLEXLAB.Data.Constructions.OpaqueConstructions.ExteriorConstructions.ExteriorDoorInsulated

Model of an insulated exterior door

Buildings.ThermalZones.Detailed.FLEXLAB.Data.Constructions.OpaqueConstructions.ExteriorConstructions.ExteriorDoorInsulated

Information

This is a model of an insulated exterior door. It is used in all FLEXLAB test cell models.

Extends from Buildings.HeatTransfer.Data.OpaqueConstructions.Generic (Thermal properties of opaque constructions).

Parameters

Type	Name	Default	Description
Integer	nLay	3	Number of layers
Material	material[nLay]	{Buildings.HeatTransfer.Data...	Layer by layer declaration of material, starting from outside to room-side
Emissivity	absIR_a	0.9	Infrared absorptivity of surface a (usually outside-facing surface) [1]
Emissivity	absIR_b	0.9	Infrared absorptivity of surface b (usually room-facing surface) [1]
Emissivity	absSol_a	0.5	Solar absorptivity of surface a (usually outside-facing surface) [1]
Emissivity	absSol_b	0.5	Solar absorptivity of surface b (usually room-facing surface) [1]
SurfaceRoughness	roughness_a	Buildings.HeatTransfer.Types...	Exterior surface roughness
Advanced
Integer	nSta[nLay]	{material[i].nSta for i in 1...	Number of states (do not overwrite, used to work around Dymola 2017 bug)

Modelica definition

record ExteriorDoorInsulated = Buildings.HeatTransfer.Data.OpaqueConstructions.Generic(final material={ Buildings.HeatTransfer.Data.Solids.Plywood(x=0.01588), Buildings.HeatTransfer.Data.Solids.InsulationBoard(x=0.05), Buildings.HeatTransfer.Data.Solids.Plywood(x=0.01588)}, final nLay=3) "Model of an insulated exterior door";

Buildings.ThermalZones.Detailed.FLEXLAB.Data.Constructions.OpaqueConstructions.ExteriorConstructions.ExteriorDoorUninsulated

Model of an uninsulated exterior door

Buildings.ThermalZones.Detailed.FLEXLAB.Data.Constructions.OpaqueConstructions.ExteriorConstructions.ExteriorDoorUninsulated

Information

This is a model of an uninsulated exterior door. It is used in all FLEXLAB electrical room models.

Extends from Buildings.HeatTransfer.Data.OpaqueConstructions.Generic (Thermal properties of opaque constructions).

Parameters

Type	Name	Default	Description
Integer	nLay	2	Number of layers
Material	material[nLay]	{Buildings.HeatTransfer.Data...	Layer by layer declaration of material, starting from outside to room-side
Emissivity	absIR_a	0.9	Infrared absorptivity of surface a (usually outside-facing surface) [1]
Emissivity	absIR_b	0.9	Infrared absorptivity of surface b (usually room-facing surface) [1]
Emissivity	absSol_a	0.5	Solar absorptivity of surface a (usually outside-facing surface) [1]
Emissivity	absSol_b	0.5	Solar absorptivity of surface b (usually room-facing surface) [1]
SurfaceRoughness	roughness_a	Buildings.HeatTransfer.Types...	Exterior surface roughness
Advanced
Integer	nSta[nLay]	{material[i].nSta for i in 1...	Number of states (do not overwrite, used to work around Dymola 2017 bug)

Modelica definition

record ExteriorDoorUninsulated = Buildings.HeatTransfer.Data.OpaqueConstructions.Generic(final material={ Buildings.HeatTransfer.Data.Solids.Plywood(x=0.01588), Buildings.HeatTransfer.Data.Solids.Plywood(x=0.01588)}, final nLay=2) "Model of an uninsulated exterior door";