Buildings.ThermalZones.Detailed.FLEXLAB.Data.Constructions.OpaqueConstructions.ExteriorConstructions

Exterior walls in FLEXLAB test cells

Information

This package contains constructions defining exterior walls used in FLEXLAB test cells. The following table lists locations in FLEXLAB test cells where the constructions are used. Locations of walls in UF90XR are described assuming that the windows are facing south. Some of the constructions are combined into single packages because they are, from a thermal point of view, functionally identical.

Construction Test Cell Wall
Construction1 All test cells:
UF90XRA:
UF90XRB:
UF90X1A:
North wall of the closet
West exterior wall
East exterior wall
West exterior wall
Construction2 UF90X2: South exterior wall
Construction3 All test cells: North wall of electrical room
Construction5and8 UF90XRB: North exterior and south exterior
Construction9 UF90X1: South exterior wall
Construction10 UF90X3: South exterior wall
Construction17and24 UF90XRA: North exterior and south exterior

Extends from Modelica.Icons.MaterialPropertiesPackage (Icon for package containing property classes).

Package Content

Name Description
Buildings.ThermalZones.Detailed.FLEXLAB.Data.Constructions.OpaqueConstructions.ExteriorConstructions.Construction1 Construction1 North wall in FLEXLAB closets, west wall in XRA, east wall in XRB, west wall in X1A
Buildings.ThermalZones.Detailed.FLEXLAB.Data.Constructions.OpaqueConstructions.ExteriorConstructions.Construction10and23 Construction10and23 South and north exterior wall in test bed X3
Buildings.ThermalZones.Detailed.FLEXLAB.Data.Constructions.OpaqueConstructions.ExteriorConstructions.Construction17and24 Construction17and24 Wall construction found in XRA
Buildings.ThermalZones.Detailed.FLEXLAB.Data.Constructions.OpaqueConstructions.ExteriorConstructions.Construction2 Construction2 South wall in test bed X2
Buildings.ThermalZones.Detailed.FLEXLAB.Data.Constructions.OpaqueConstructions.ExteriorConstructions.Construction3 Construction3 North wall of the electrical room in all test cells
Buildings.ThermalZones.Detailed.FLEXLAB.Data.Constructions.OpaqueConstructions.ExteriorConstructions.Construction5and8 Construction5and8 Wall construction found in test cell XRB
Buildings.ThermalZones.Detailed.FLEXLAB.Data.Constructions.OpaqueConstructions.ExteriorConstructions.Construction9 Construction9 South wall in test bed X1
Buildings.ThermalZones.Detailed.FLEXLAB.Data.Constructions.OpaqueConstructions.ExteriorConstructions.ExteriorDoorInsulated ExteriorDoorInsulated Model of an insulated exterior door
Buildings.ThermalZones.Detailed.FLEXLAB.Data.Constructions.OpaqueConstructions.ExteriorConstructions.ExteriorDoorUninsulated ExteriorDoorUninsulated Model of an uninsulated exterior door

Buildings.ThermalZones.Detailed.FLEXLAB.Data.Constructions.OpaqueConstructions.ExteriorConstructions.Construction1 Buildings.ThermalZones.Detailed.FLEXLAB.Data.Constructions.OpaqueConstructions.ExteriorConstructions.Construction1

North wall in FLEXLAB closets, west wall in XRA, east wall in XRB, west wall in X1A

Buildings.ThermalZones.Detailed.FLEXLAB.Data.Constructions.OpaqueConstructions.ExteriorConstructions.Construction1

Information

This is a construction of an exterior wall used in some FLEXLAB test cells. It should be used in the north wall in all FLEXLAB closets, west wall in XRA, east wall in XRB and west wall in X1A.

Extends from Buildings.HeatTransfer.Data.OpaqueConstructions.Generic (Thermal properties of opaque constructions).

Parameters

TypeNameDefaultDescription
IntegernLay5Number of layers
Materialmaterial[nLay]{Buildings.HeatTransfer.Data...Layer by layer declaration of material, starting from outside to room-side
EmissivityabsIR_a0.9Infrared absorptivity of surface a (usually outside-facing surface) [1]
EmissivityabsIR_b0.9Infrared absorptivity of surface b (usually room-facing surface) [1]
EmissivityabsSol_a0.5Solar absorptivity of surface a (usually outside-facing surface) [1]
EmissivityabsSol_b0.5Solar absorptivity of surface b (usually room-facing surface) [1]
SurfaceRoughnessroughness_aBuildings.HeatTransfer.Types...Exterior surface roughness
Advanced
IntegernSta[nLay]{material[i].nSta for i in 1...Number of states (do not overwrite, used to work around Dymola 2017 bug)

Modelica definition

record Construction1 = Buildings.HeatTransfer.Data.OpaqueConstructions.Generic (final material={Buildings.HeatTransfer.Data.Solids.InsulationBoard(x=0.127), Buildings.HeatTransfer.Data.Solids.Plywood(x=0.0127), Buildings.HeatTransfer.Data.Solids.InsulationBoard(x=0.2032), Buildings.HeatTransfer.Data.Solids.Plywood(x=0.0127), Buildings.HeatTransfer.Data.Solids.GypsumBoard(x=0.01588)}, final nLay=5) "North wall in FLEXLAB closets, west wall in XRA, east wall in XRB, west wall in X1A";

Buildings.ThermalZones.Detailed.FLEXLAB.Data.Constructions.OpaqueConstructions.ExteriorConstructions.Construction10and23 Buildings.ThermalZones.Detailed.FLEXLAB.Data.Constructions.OpaqueConstructions.ExteriorConstructions.Construction10and23

South and north exterior wall in test bed X3

Buildings.ThermalZones.Detailed.FLEXLAB.Data.Constructions.OpaqueConstructions.ExteriorConstructions.Construction10and23

Information

This is a model of exterior walls in test bed X3. It is used to represent both the north and south exterior wall of the test cells themselves.

Extends from Buildings.HeatTransfer.Data.OpaqueConstructions.Generic (Thermal properties of opaque constructions).

Parameters

TypeNameDefaultDescription
IntegernLay4Number of layers
Materialmaterial[nLay]{Buildings.HeatTransfer.Data...Layer by layer declaration of material, starting from outside to room-side
EmissivityabsIR_a0.9Infrared absorptivity of surface a (usually outside-facing surface) [1]
EmissivityabsIR_b0.9Infrared absorptivity of surface b (usually room-facing surface) [1]
EmissivityabsSol_a0.5Solar absorptivity of surface a (usually outside-facing surface) [1]
EmissivityabsSol_b0.5Solar absorptivity of surface b (usually room-facing surface) [1]
SurfaceRoughnessroughness_aBuildings.HeatTransfer.Types...Exterior surface roughness
Advanced
IntegernSta[nLay]{material[i].nSta for i in 1...Number of states (do not overwrite, used to work around Dymola 2017 bug)

Modelica definition

record Construction10and23 = Buildings.HeatTransfer.Data.OpaqueConstructions.Generic (final material={Buildings.HeatTransfer.Data.Solids.InsulationBoard(x=0.02413), Buildings.HeatTransfer.Data.Solids.Plywood(x=0.0127), Buildings.HeatTransfer.Data.Solids.InsulationBoard(x=0.08255), Buildings.HeatTransfer.Data.Solids.GypsumBoard(x=0.01588)}, final nLay=4) "South and north exterior wall in test bed X3";

Buildings.ThermalZones.Detailed.FLEXLAB.Data.Constructions.OpaqueConstructions.ExteriorConstructions.Construction17and24 Buildings.ThermalZones.Detailed.FLEXLAB.Data.Constructions.OpaqueConstructions.ExteriorConstructions.Construction17and24

Wall construction found in XRA

Buildings.ThermalZones.Detailed.FLEXLAB.Data.Constructions.OpaqueConstructions.ExteriorConstructions.Construction17and24

Information

This is a model of one of the constructions used in test cell XRA. It represents the south wall, and the north wall next to the door.

Extends from Buildings.HeatTransfer.Data.OpaqueConstructions.Generic (Thermal properties of opaque constructions).

Parameters

TypeNameDefaultDescription
IntegernLay3Number of layers
Materialmaterial[nLay]{Buildings.HeatTransfer.Data...Layer by layer declaration of material, starting from outside to room-side
EmissivityabsIR_a0.9Infrared absorptivity of surface a (usually outside-facing surface) [1]
EmissivityabsIR_b0.9Infrared absorptivity of surface b (usually room-facing surface) [1]
EmissivityabsSol_a0.5Solar absorptivity of surface a (usually outside-facing surface) [1]
EmissivityabsSol_b0.5Solar absorptivity of surface b (usually room-facing surface) [1]
SurfaceRoughnessroughness_aBuildings.HeatTransfer.Types...Exterior surface roughness
Advanced
IntegernSta[nLay]{material[i].nSta for i in 1...Number of states (do not overwrite, used to work around Dymola 2017 bug)

Modelica definition

record Construction17and24 = Buildings.HeatTransfer.Data.OpaqueConstructions.Generic (final material={Buildings.HeatTransfer.Data.Solids.InsulationBoard(x=0.04752), Buildings.HeatTransfer.Data.Solids.Plywood(x=0.0127), Buildings.HeatTransfer.Data.Solids.GypsumBoard(x=0.01588)}, final nLay=3) "Wall construction found in XRA";

Buildings.ThermalZones.Detailed.FLEXLAB.Data.Constructions.OpaqueConstructions.ExteriorConstructions.Construction2 Buildings.ThermalZones.Detailed.FLEXLAB.Data.Constructions.OpaqueConstructions.ExteriorConstructions.Construction2

South wall in test bed X2

Buildings.ThermalZones.Detailed.FLEXLAB.Data.Constructions.OpaqueConstructions.ExteriorConstructions.Construction2

Information

This is a model of the external wall used in test bed X2.

Extends from Buildings.HeatTransfer.Data.OpaqueConstructions.Generic (Thermal properties of opaque constructions).

Parameters

TypeNameDefaultDescription
IntegernLay3Number of layers
Materialmaterial[nLay]{Buildings.HeatTransfer.Data...Layer by layer declaration of material, starting from outside to room-side
EmissivityabsIR_a0.9Infrared absorptivity of surface a (usually outside-facing surface) [1]
EmissivityabsIR_b0.9Infrared absorptivity of surface b (usually room-facing surface) [1]
EmissivityabsSol_a0.5Solar absorptivity of surface a (usually outside-facing surface) [1]
EmissivityabsSol_b0.5Solar absorptivity of surface b (usually room-facing surface) [1]
SurfaceRoughnessroughness_aBuildings.HeatTransfer.Types...Exterior surface roughness
Advanced
IntegernSta[nLay]{material[i].nSta for i in 1...Number of states (do not overwrite, used to work around Dymola 2017 bug)

Modelica definition

record Construction2 = Buildings.HeatTransfer.Data.OpaqueConstructions.Generic (final material={Buildings.HeatTransfer.Data.Solids.InsulationBoard(x=0.08255), Buildings.HeatTransfer.Data.Solids.Plywood(x=0.0127), Buildings.HeatTransfer.Data.Solids.GypsumBoard(x=0.01588)}, final nLay=3) "South wall in test bed X2";

Buildings.ThermalZones.Detailed.FLEXLAB.Data.Constructions.OpaqueConstructions.ExteriorConstructions.Construction3 Buildings.ThermalZones.Detailed.FLEXLAB.Data.Constructions.OpaqueConstructions.ExteriorConstructions.Construction3

North wall of the electrical room in all test cells

Buildings.ThermalZones.Detailed.FLEXLAB.Data.Constructions.OpaqueConstructions.ExteriorConstructions.Construction3

Information

This is a model of the north wall of the electrical room in all test cells.

Extends from Buildings.HeatTransfer.Data.OpaqueConstructions.Generic (Thermal properties of opaque constructions).

Parameters

TypeNameDefaultDescription
IntegernLay4Number of layers
Materialmaterial[nLay]{Buildings.HeatTransfer.Data...Layer by layer declaration of material, starting from outside to room-side
EmissivityabsIR_a0.9Infrared absorptivity of surface a (usually outside-facing surface) [1]
EmissivityabsIR_b0.9Infrared absorptivity of surface b (usually room-facing surface) [1]
EmissivityabsSol_a0.5Solar absorptivity of surface a (usually outside-facing surface) [1]
EmissivityabsSol_b0.5Solar absorptivity of surface b (usually room-facing surface) [1]
SurfaceRoughnessroughness_aBuildings.HeatTransfer.Types...Exterior surface roughness
Advanced
IntegernSta[nLay]{material[i].nSta for i in 1...Number of states (do not overwrite, used to work around Dymola 2017 bug)

Modelica definition

record Construction3 = Buildings.HeatTransfer.Data.OpaqueConstructions.Generic (final material={Buildings.HeatTransfer.Data.Solids.InsulationBoard(x=0.127), Buildings.HeatTransfer.Data.Solids.Plywood(x=0.0127), Buildings.HeatTransfer.Data.Solids.InsulationBoard(x=0.2032), Buildings.HeatTransfer.Data.Solids.Plywood(x=0.03175)}, final nLay=4) "North wall of the electrical room in all test cells";

Buildings.ThermalZones.Detailed.FLEXLAB.Data.Constructions.OpaqueConstructions.ExteriorConstructions.Construction5and8 Buildings.ThermalZones.Detailed.FLEXLAB.Data.Constructions.OpaqueConstructions.ExteriorConstructions.Construction5and8

Wall construction found in test cell XRB

Buildings.ThermalZones.Detailed.FLEXLAB.Data.Constructions.OpaqueConstructions.ExteriorConstructions.Construction5and8

Information

This is a model of an exterior wall used in test cell XRB. It is used to model both the south facing wall, and the north facing wall next to the door.

Directions are stated assuming that the windows are facing south.

Extends from Buildings.HeatTransfer.Data.OpaqueConstructions.Generic (Thermal properties of opaque constructions).

Parameters

TypeNameDefaultDescription
IntegernLay3Number of layers
Materialmaterial[nLay]{Buildings.HeatTransfer.Data...Layer by layer declaration of material, starting from outside to room-side
EmissivityabsIR_a0.9Infrared absorptivity of surface a (usually outside-facing surface) [1]
EmissivityabsIR_b0.9Infrared absorptivity of surface b (usually room-facing surface) [1]
EmissivityabsSol_a0.5Solar absorptivity of surface a (usually outside-facing surface) [1]
EmissivityabsSol_b0.5Solar absorptivity of surface b (usually room-facing surface) [1]
SurfaceRoughnessroughness_aBuildings.HeatTransfer.Types...Exterior surface roughness
Advanced
IntegernSta[nLay]{material[i].nSta for i in 1...Number of states (do not overwrite, used to work around Dymola 2017 bug)

Modelica definition

record Construction5and8 = Buildings.HeatTransfer.Data.OpaqueConstructions.Generic (final material={Buildings.HeatTransfer.Data.Solids.InsulationBoard(x=0.1016), Buildings.HeatTransfer.Data.Solids.Plywood(x=0.0127), Buildings.HeatTransfer.Data.Solids.GypsumBoard(x=0.01588)}, final nLay=3) "Wall construction found in test cell XRB";

Buildings.ThermalZones.Detailed.FLEXLAB.Data.Constructions.OpaqueConstructions.ExteriorConstructions.Construction9 Buildings.ThermalZones.Detailed.FLEXLAB.Data.Constructions.OpaqueConstructions.ExteriorConstructions.Construction9

South wall in test bed X1

Buildings.ThermalZones.Detailed.FLEXLAB.Data.Constructions.OpaqueConstructions.ExteriorConstructions.Construction9

Information

This is a model of the south wall in test bed X1.

Extends from Buildings.HeatTransfer.Data.OpaqueConstructions.Generic (Thermal properties of opaque constructions).

Parameters

TypeNameDefaultDescription
IntegernLay3Number of layers
Materialmaterial[nLay]{Buildings.HeatTransfer.Data...Layer by layer declaration of material, starting from outside to room-side
EmissivityabsIR_a0.9Infrared absorptivity of surface a (usually outside-facing surface) [1]
EmissivityabsIR_b0.9Infrared absorptivity of surface b (usually room-facing surface) [1]
EmissivityabsSol_a0.5Solar absorptivity of surface a (usually outside-facing surface) [1]
EmissivityabsSol_b0.5Solar absorptivity of surface b (usually room-facing surface) [1]
SurfaceRoughnessroughness_aBuildings.HeatTransfer.Types...Exterior surface roughness
Advanced
IntegernSta[nLay]{material[i].nSta for i in 1...Number of states (do not overwrite, used to work around Dymola 2017 bug)

Modelica definition

record Construction9 = Buildings.HeatTransfer.Data.OpaqueConstructions.Generic (final material={Buildings.HeatTransfer.Data.Solids.Plywood(x=0.0127), Buildings.HeatTransfer.Data.Solids.InsulationBoard(x=0.06985), Buildings.HeatTransfer.Data.Solids.GypsumBoard(x=0.01588)}, final nLay=3) "South wall in test bed X1";

Buildings.ThermalZones.Detailed.FLEXLAB.Data.Constructions.OpaqueConstructions.ExteriorConstructions.ExteriorDoorInsulated Buildings.ThermalZones.Detailed.FLEXLAB.Data.Constructions.OpaqueConstructions.ExteriorConstructions.ExteriorDoorInsulated

Model of an insulated exterior door

Buildings.ThermalZones.Detailed.FLEXLAB.Data.Constructions.OpaqueConstructions.ExteriorConstructions.ExteriorDoorInsulated

Information

This is a model of an insulated exterior door. It is used in all FLEXLAB test cell models.

Extends from Buildings.HeatTransfer.Data.OpaqueConstructions.Generic (Thermal properties of opaque constructions).

Parameters

TypeNameDefaultDescription
IntegernLay3Number of layers
Materialmaterial[nLay]{Buildings.HeatTransfer.Data...Layer by layer declaration of material, starting from outside to room-side
EmissivityabsIR_a0.9Infrared absorptivity of surface a (usually outside-facing surface) [1]
EmissivityabsIR_b0.9Infrared absorptivity of surface b (usually room-facing surface) [1]
EmissivityabsSol_a0.5Solar absorptivity of surface a (usually outside-facing surface) [1]
EmissivityabsSol_b0.5Solar absorptivity of surface b (usually room-facing surface) [1]
SurfaceRoughnessroughness_aBuildings.HeatTransfer.Types...Exterior surface roughness
Advanced
IntegernSta[nLay]{material[i].nSta for i in 1...Number of states (do not overwrite, used to work around Dymola 2017 bug)

Modelica definition

record ExteriorDoorInsulated = Buildings.HeatTransfer.Data.OpaqueConstructions.Generic (final material={Buildings.HeatTransfer.Data.Solids.Plywood(x=0.01588), Buildings.HeatTransfer.Data.Solids.InsulationBoard(x=0.05), Buildings.HeatTransfer.Data.Solids.Plywood(x=0.01588)}, final nLay=3) "Model of an insulated exterior door";

Buildings.ThermalZones.Detailed.FLEXLAB.Data.Constructions.OpaqueConstructions.ExteriorConstructions.ExteriorDoorUninsulated Buildings.ThermalZones.Detailed.FLEXLAB.Data.Constructions.OpaqueConstructions.ExteriorConstructions.ExteriorDoorUninsulated

Model of an uninsulated exterior door

Buildings.ThermalZones.Detailed.FLEXLAB.Data.Constructions.OpaqueConstructions.ExteriorConstructions.ExteriorDoorUninsulated

Information

This is a model of an uninsulated exterior door. It is used in all FLEXLAB electrical room models.

Extends from Buildings.HeatTransfer.Data.OpaqueConstructions.Generic (Thermal properties of opaque constructions).

Parameters

TypeNameDefaultDescription
IntegernLay2Number of layers
Materialmaterial[nLay]{Buildings.HeatTransfer.Data...Layer by layer declaration of material, starting from outside to room-side
EmissivityabsIR_a0.9Infrared absorptivity of surface a (usually outside-facing surface) [1]
EmissivityabsIR_b0.9Infrared absorptivity of surface b (usually room-facing surface) [1]
EmissivityabsSol_a0.5Solar absorptivity of surface a (usually outside-facing surface) [1]
EmissivityabsSol_b0.5Solar absorptivity of surface b (usually room-facing surface) [1]
SurfaceRoughnessroughness_aBuildings.HeatTransfer.Types...Exterior surface roughness
Advanced
IntegernSta[nLay]{material[i].nSta for i in 1...Number of states (do not overwrite, used to work around Dymola 2017 bug)

Modelica definition

record ExteriorDoorUninsulated = Buildings.HeatTransfer.Data.OpaqueConstructions.Generic (final material={Buildings.HeatTransfer.Data.Solids.Plywood(x=0.01588), Buildings.HeatTransfer.Data.Solids.Plywood(x=0.01588)}, final nLay=2) "Model of an uninsulated exterior door";