Buildings.Fluid.Sources.BaseClasses

Package with base classes for Buildings.Fluid.Sources

Information

This package contains base classes that are used to construct the models in Buildings.Fluid.Sources.

Extends from Modelica.Icons.BasesPackage (Icon for packages containing base classes).

Package Content

Name Description
Buildings.Fluid.Sources.BaseClasses.Outside Outside Boundary that takes weather data, and optionally trace substances, as an input

Buildings.Fluid.Sources.BaseClasses.Outside Buildings.Fluid.Sources.BaseClasses.Outside

Boundary that takes weather data, and optionally trace substances, as an input

Buildings.Fluid.Sources.BaseClasses.Outside

Information

This is the base class for models that describes boundary conditions for pressure, enthalpy, and species concentration that can be obtained from weather data, and that may be modified based on the wind pressure.

If the parameter use_C_in is false (default option), the C parameter is used as the trace substance for flow that leaves the component, and the C_in input connector is disabled; if use_C_in is true, then the C parameter is ignored, and the value provided by the input connector is used instead.

Note that boundary temperature, mass fractions and trace substances have only an effect if the mass flow is from the boundary into the port. If mass is flowing from the port into the boundary, the boundary definitions, with exception of boundary pressure, do not have an effect.

Extends from Modelica.Fluid.Sources.BaseClasses.PartialSource (Partial component source with one fluid connector).

Parameters

TypeNameDefaultDescription
replaceable package MediumPartialMediumMedium model within the source
Booleanuse_C_infalseGet the trace substances from the input connector
ExtraPropertyC[Medium.nC]fill(0, Medium.nC)Fixed values of trace substances

Connectors

TypeNameDescription
FluidPorts_bports[nPorts] 
input RealInputC_in[Medium.nC]Prescribed boundary trace substances
BusweaBusBus with weather data

Modelica definition

partial model Outside "Boundary that takes weather data, and optionally trace substances, as an input" extends Modelica.Fluid.Sources.BaseClasses.PartialSource; parameter Boolean use_C_in=false "Get the trace substances from the input connector"; parameter Medium.ExtraProperty C[Medium.nC](final quantity=Medium.extraPropertiesNames) = fill(0, Medium.nC) "Fixed values of trace substances"; Modelica.Blocks.Interfaces.RealInput C_in[Medium.nC](final quantity=Medium.extraPropertiesNames) if use_C_in "Prescribed boundary trace substances"; Buildings.BoundaryConditions.WeatherData.Bus weaBus "Bus with weather data"; protected final parameter Boolean singleSubstance=(Medium.nX == 1) "True if single substance medium"; Buildings.Utilities.Psychrometrics.X_pTphi x_pTphi if not singleSubstance "Block to compute water vapor concentration"; Modelica.Blocks.Interfaces.RealInput X_in_internal[Medium.nX](each final unit ="kg/kg", final quantity=Medium.substanceNames) "Needed to connect to conditional connector"; Modelica.Blocks.Interfaces.RealInput T_in_internal(final unit="K", displayUnit="degC") "Needed to connect to conditional connector"; Modelica.Blocks.Interfaces.RealInput p_in_internal(final unit="Pa") "Needed to connect to conditional connector"; Modelica.Blocks.Interfaces.RealInput C_in_internal[Medium.nC](quantity=Medium.extraPropertiesNames) "Needed to connect to conditional connector"; equation // Check medium properties Modelica.Fluid.Utilities.checkBoundary( Medium.mediumName, Medium.substanceNames, Medium.singleState, true, medium.X, "Boundary_pT"); // Conditional connectors for trace substances connect(C_in, C_in_internal); if not use_C_in then C_in_internal = C; end if; // Connections to input. This is required to obtain the data from // the weather bus in case that the component x_pTphi is conditionally removed connect(weaBus.TDryBul, T_in_internal); // Connections to compute species concentration connect(p_in_internal, x_pTphi.p_in); connect(T_in_internal, x_pTphi.T); connect(weaBus.relHum, x_pTphi.phi); connect(X_in_internal, x_pTphi.X); if singleSubstance then X_in_internal = ones(Medium.nX); end if; // Assign medium properties medium.p = p_in_internal; medium.T = T_in_internal; medium.Xi = X_in_internal[1:Medium.nXi]; ports.C_outflow = fill(C_in_internal, nPorts); end Outside;