Buildings.Fluid.SolarCollectors.Controls.Examples
Examples for solar thermal collector controller models
Information
This package contains examples demonstrating the use of models that can be found in Buildings.Fluid.SolarCollectors.Controls.
Extends from Modelica.Icons.ExamplesPackage (Icon for packages containing runnable examples).
Package Content
| Name | Description |
|---|---|
 SolarPumpController
|
Example for the solar pump controller |
Buildings.Fluid.SolarCollectors.Controls.Examples.SolarPumpController
Example for the solar pump controller
Information
This model illustrates the use of the Buildings.Fluid.SolarCollectors.Controls.SolarPumpController model. Based on weather data and inlet temperature, the controller switches the pump on and off.
Extends from Modelica.Icons.Example (Icon for runnable examples).
Modelica definition
model SolarPumpController "Example for the solar pump controller"
extends Modelica.Icons.Example;
Buildings.Fluid.SolarCollectors.Controls.SolarPumpController pumCon(per=
Buildings.Fluid.SolarCollectors.Data.GlazedFlatPlate.FP_ThermaLiteHS20())
"Model controlling the on/off status of the pump";
Buildings.BoundaryConditions.WeatherData.ReaderTMY3 weaDat(filNam="modelica://Buildings/Resources/weatherdata/USA_CA_San.Francisco.Intl.AP.724940_TMY3.mos")
"Weather data input file";
Modelica.Blocks.Sources.Sine sine(
amplitude=20,
freqHz=0.0001,
offset=273.15 + 40) "Water inlet temperature";
equation
connect(weaDat.weaBus, pumCon.weaBus);
connect(sine.y, pumCon.TIn);
end SolarPumpController;