Buildings.Controls.OBC.CDL.Types

Package with type definitions

Information

This package contains type definitions.

Extends from Modelica.Icons.TypesPackage (Icon for packages containing type definitions).

Package Content

Name	Description
Day	Enumeration for the day types
Extrapolation	Enumeration defining the extrapolation of time table interpolation
Init	Enumeration defining initialization of a block
Reset	Options for integrator reset
SimpleController	Enumeration defining P, PI, PD, or PID simple controller type
Smoothness	Enumeration defining the smoothness of table interpolation
ZeroTime	Enumerationset the date corresponding to time = 0

Types and constants

type Day = enumeration(
    WorkingDay "Working day, such as Monday through Friday",
    NonWorkingDay "Non-working day, such as week-ends, but not holidays",
    Holiday "Holiday") "Enumeration for the day types";

type Extrapolation = enumeration(
    HoldLastPoint "Hold the first/last table point outside of the table scope",

    LastTwoPoints 
      "Extrapolate by using the derivative at the first/last table points outside of the table scope",

    Periodic "Repeat the table scope periodically") 
  "Enumeration defining the extrapolation of time table interpolation";

type Init = enumeration(
    NoInit "No initialization (start values are used as guess values)",
    InitialState "Initialization with initial states",
    InitialOutput "Initialization with initial outputs") 
  "Enumeration defining initialization of a block";

type Reset = enumeration(
    Disabled "Disabled",
    Parameter "Use parameter value",
    Input "Use input signal") "Options for integrator reset";

type SimpleController = enumeration(
    P "P controller",
    PI "PI controller",
    PD "PD controller",
    PID "PID controller") 
  "Enumeration defining P, PI, PD, or PID simple controller type";

type Smoothness = enumeration(
    LinearSegments "Table points are linearly interpolated",
    ConstantSegments 
      "Table points are not interpolated, but the previous tabulated value is returned")
  "Enumeration defining the smoothness of table interpolation";

type ZeroTime = enumeration(
    UnixTimeStamp "Thu, 01 Jan 1970 00:00:00 local time",
    Custom "User specified local time",
    NY2010 "New year 2010, 00:00:00 local time",
    NY2011 "New year 2011, 00:00:00 local time",
    NY2012 "New year 2012, 00:00:00 local time",
    NY2013 "New year 2013, 00:00:00 local time",
    NY2014 "New year 2014, 00:00:00 local time",
    NY2015 "New year 2015, 00:00:00 local time",
    NY2016 "New year 2016, 00:00:00 local time",
    NY2017 "New year 2017, 00:00:00 local time",
    NY2018 "New year 2018, 00:00:00 local time",
    NY2019 "New year 2019, 00:00:00 local time",
    NY2020 "New year 2020, 00:00:00 local time") 
  "Enumerationset the date corresponding to time = 0";