Buildings.Fluid.SolarCollectors

This component models a solar thermal collector according to the ASHRAE93 test standard.

Notice

References

Parameters

Connectors

Modelica definition

Name	Description
UsersGuide	User's Guide for Buildings.Fluid.SolarCollectors
ASHRAE93	Model of a flat plate solar thermal collector
EN12975	Model of a concentrating solar collector
Controls	Package for solar thermal collector controllers
Data	Data for solar thermal collectors
Types	Package with type definitions used in solar collector data records
Examples	Examples demonstrating the use of models in the SolarCollectors package
Validation	Collection of validation models
BaseClasses	Package with base classes for Buildings.Fluid.SolarCollectors

Type	Name	Default	Description
replaceable package Medium	PartialMedium	Medium in the component
Integer	nSeg	3	Number of segments used to discretize the collector model
Angle	lat		Latitude [rad]
Angle	azi		Surface azimuth (0 for south-facing; -90 degree for east-facing; +90 degree for west facing [rad]
Angle	til		Surface tilt (0 for horizontally mounted collector) [rad]
Real	rho		Ground reflectance
HeatCapacity	C	385*perPar.mDry	Heat capacity of solar collector without fluid (default: cp_coppermDrynPanels) [J/K]
GenericSolarCollector	per		Performance data
Initialization
MassFlowRate	m_flow.start	0	Mass flow rate from port_a to port_b (m_flow > 0 is design flow direction) [kg/s]
PressureDifference	dp.start	0	Pressure difference between port_a and port_b [Pa]
Shading
Boolean	use_shaCoe_in	false	Enables an input connector for shaCoe
Real	shaCoe	0	Shading coefficient. 0.0: no shading, 1.0: full shading
Area declarations
NumberSelection	nColType	Buildings.Fluid.SolarCollect...	Selection of area specification format
Integer	nPanels	0	Desired number of panels in the simulation
Area	totalArea	0	Total area of panels in the simulation [m2]
Configuration declarations
SystemConfiguration	sysConfig	Buildings.Fluid.SolarCollect...	Selection of system configuration
Dynamics
Equations
Dynamics	energyDynamics	Modelica.Fluid.Types.Dynamic...	Type of energy balance: dynamic (3 initialization options) or steady state
Dynamics	massDynamics	energyDynamics	Type of mass balance: dynamic (3 initialization options) or steady state
Real	mSenFac	1	Factor for scaling the sensible thermal mass of the volume
Initialization
AbsolutePressure	p_start	Medium.p_default	Start value of pressure [Pa]
Temperature	T_start	Medium.T_default	Start value of temperature [K]
MassFraction	X_start[Medium.nX]	Medium.X_default	Start value of mass fractions m_i/m [kg/kg]
ExtraProperty	C_start[Medium.nC]	fill(0, Medium.nC)	Start value of trace substances
ExtraProperty	C_nominal[Medium.nC]	fill(1E-2, Medium.nC)	Nominal value of trace substances. (Set to typical order of magnitude.)
Flow resistance
Boolean	computeFlowResistance	true	=true, compute flow resistance. Set to false to assume no friction
Boolean	from_dp	false	= true, use m_flow = f(dp) else dp = f(m_flow)
Boolean	linearizeFlowResistance	false	= true, use linear relation between m_flow and dp for any flow rate
Real	deltaM	0.1	Fraction of nominal flow rate where flow transitions to laminar
Assumptions
Boolean	allowFlowReversal	true	= true to allow flow reversal, false restricts to design direction (port_a -> port_b)
Advanced
MassFlowRate	m_flow_small	1E-4*abs(m_flow_nominal)	Small mass flow rate for regularization of zero flow [kg/s]
Boolean	homotopyInitialization	true	= true, use homotopy method
Diagnostics
Boolean	show_T	false	= true, if actual temperature at port is computed

Type	Name	Description
FluidPort_a	port_a	Fluid connector a (positive design flow direction is from port_a to port_b)
FluidPort_b	port_b	Fluid connector b (positive design flow direction is from port_a to port_b)
input RealInput	shaCoe_in	Shading coefficient
Bus	weaBus	Weather data bus

model ASHRAE93 "Model of a flat plate solar thermal collector" extends Buildings.Fluid.SolarCollectors.BaseClasses.PartialSolarCollector(final perPar=per); parameter Buildings.Fluid.SolarCollectors.Data.GenericSolarCollector per "Performance data"; BaseClasses.ASHRAESolarGain solGai( final B0=per.B0, final B1=per.B1, final shaCoe=shaCoe, final til=til, final nSeg=nSeg, final y_intercept=per.y_intercept, final use_shaCoe_in=use_shaCoe_in, final A_c=TotalArea_internal, redeclare package Medium = Medium) "Identifies heat gained from the sun using standard ASHRAE93 calculations"; BaseClasses.ASHRAEHeatLoss heaLos( final nSeg=nSeg, final slope=per.slope, final y_intercept=per.y_intercept, redeclare package Medium = Medium, final G_nominal=per.G_nominal, dT_nominal=per.dT_nominal, final A_c=TotalArea_internal, m_flow_nominal=per.mperA_flow_nominal*per.A, final cp_default=cp_default) "Calculates the heat lost to the surroundings using the ASHRAE93 standard calculations"; equation connect(weaBus.TDryBul, heaLos.TEnv); connect(HDirTil.inc, solGai.incAng); connect(HDirTil.H, solGai.HDirTil); connect(HDifTilIso.HGroDifTil, solGai.HGroDifTil); connect(HDifTilIso.HSkyDifTil, solGai.HSkyDifTil); connect(shaCoe_in, solGai.shaCoe_in); connect(solGai.QSol_flow, heaGai.Q_flow); connect(temSen.T, heaLos.TFlu); connect(temSen.T, solGai.TFlu); connect(heaLos.QLos, QLos.Q_flow); end ASHRAE93;

Buildings.Fluid.SolarCollectors.EN12975

Information

Overview

This component models a solar thermal collector according to the EN12975 test standard.

Notice

References

Parameters

Connectors

Modelica definition

Type	Name	Default	Description
replaceable package Medium	PartialMedium	Medium in the component
Integer	nSeg	3	Number of segments used to discretize the collector model
Angle	lat		Latitude [rad]
Angle	azi		Surface azimuth (0 for south-facing; -90 degree for east-facing; +90 degree for west facing [rad]
Angle	til		Surface tilt (0 for horizontally mounted collector) [rad]
Real	rho		Ground reflectance
HeatCapacity	C	385*perPar.mDry	Heat capacity of solar collector without fluid (default: cp_coppermDrynPanels) [J/K]
GenericSolarCollector	per		Performance data
Initialization
MassFlowRate	m_flow.start	0	Mass flow rate from port_a to port_b (m_flow > 0 is design flow direction) [kg/s]
PressureDifference	dp.start	0	Pressure difference between port_a and port_b [Pa]
Shading
Boolean	use_shaCoe_in	false	Enables an input connector for shaCoe
Real	shaCoe	0	Shading coefficient. 0.0: no shading, 1.0: full shading
Area declarations
NumberSelection	nColType	Buildings.Fluid.SolarCollect...	Selection of area specification format
Integer	nPanels	0	Desired number of panels in the simulation
Area	totalArea	0	Total area of panels in the simulation [m2]
Configuration declarations
SystemConfiguration	sysConfig	Buildings.Fluid.SolarCollect...	Selection of system configuration
Dynamics
Equations
Dynamics	energyDynamics	Modelica.Fluid.Types.Dynamic...	Type of energy balance: dynamic (3 initialization options) or steady state
Dynamics	massDynamics	energyDynamics	Type of mass balance: dynamic (3 initialization options) or steady state
Real	mSenFac	1	Factor for scaling the sensible thermal mass of the volume
Initialization
AbsolutePressure	p_start	Medium.p_default	Start value of pressure [Pa]
Temperature	T_start	Medium.T_default	Start value of temperature [K]
MassFraction	X_start[Medium.nX]	Medium.X_default	Start value of mass fractions m_i/m [kg/kg]
ExtraProperty	C_start[Medium.nC]	fill(0, Medium.nC)	Start value of trace substances
ExtraProperty	C_nominal[Medium.nC]	fill(1E-2, Medium.nC)	Nominal value of trace substances. (Set to typical order of magnitude.)
Flow resistance
Boolean	computeFlowResistance	true	=true, compute flow resistance. Set to false to assume no friction
Boolean	from_dp	false	= true, use m_flow = f(dp) else dp = f(m_flow)
Boolean	linearizeFlowResistance	false	= true, use linear relation between m_flow and dp for any flow rate
Real	deltaM	0.1	Fraction of nominal flow rate where flow transitions to laminar
Assumptions
Boolean	allowFlowReversal	true	= true to allow flow reversal, false restricts to design direction (port_a -> port_b)
Advanced
MassFlowRate	m_flow_small	1E-4*abs(m_flow_nominal)	Small mass flow rate for regularization of zero flow [kg/s]
Boolean	homotopyInitialization	true	= true, use homotopy method
Diagnostics
Boolean	show_T	false	= true, if actual temperature at port is computed

Type	Name	Description
FluidPort_a	port_a	Fluid connector a (positive design flow direction is from port_a to port_b)
FluidPort_b	port_b	Fluid connector b (positive design flow direction is from port_a to port_b)
input RealInput	shaCoe_in	Shading coefficient
Bus	weaBus	Weather data bus

model EN12975 "Model of a concentrating solar collector" extends Buildings.Fluid.SolarCollectors.BaseClasses.PartialSolarCollector(final perPar=per); parameter Buildings.Fluid.SolarCollectors.Data.GenericSolarCollector per "Performance data"; BaseClasses.EN12975SolarGain solGai( final A_c=TotalArea_internal, final nSeg=nSeg, final y_intercept=per.y_intercept, final B0=per.B0, final B1=per.B1, final shaCoe=shaCoe, final iamDiff=per.IAMDiff, final use_shaCoe_in=use_shaCoe_in, redeclare package Medium = Medium) "Identifies heat gained from the sun using standard EN12975 calculations"; BaseClasses.EN12975HeatLoss heaLos( final A_c=TotalArea_internal, final nSeg=nSeg, final y_intercept=per.y_intercept, final C1=per.C1, final C2=per.C2, redeclare package Medium = Medium, final G_nominal=per.G_nominal, final dT_nominal=per.dT_nominal, final m_flow_nominal=per.mperA_flow_nominal*per.A, final cp_default=cp_default) "Calculates the heat lost to the surroundings using the EN12975 standard calculations"; equation connect(shaCoe_internal, solGai.shaCoe_in); connect(weaBus.TDryBul, heaLos.TEnv); connect(HDirTil.inc, solGai.incAng); connect(HDifTilIso.H, solGai.HSkyDifTil); connect(HDirTil.H, solGai.HDirTil); connect(shaCoe_in, solGai.shaCoe_in); connect(heaLos.TFlu, temSen.T); connect(heaLos.QLos, QLos.Q_flow); connect(solGai.QSol_flow, heaGai.Q_flow); connect(temSen.T, solGai.TFlu); end EN12975;