LBL logo

Buildings.Electrical.AC.ThreePhasesUnbalanced.Interfaces.Examples

Package with example models

Information

This package contains examples for the use of models that can be found in Buildings.Electrical.AC.ThreePhasesUnbalanced.Interfaces.

Extends from Modelica.Icons.ExamplesPackage (Icon for packages containing runnable examples).

Package Content

Name Description
WyeToDelta Test for Y to D connection

Buildings.Electrical.AC.ThreePhasesUnbalanced.Interfaces.Examples.WyeToDelta

Test for Y to D connection

Buildings.Electrical.AC.ThreePhasesUnbalanced.Interfaces.Examples.WyeToDelta

Information

This simple example shows how to use a Y to D adapter.

The probe probe_Y mesaures the phase voltages before they are converted into D. Their RMS value is equal to 480/sqrt(3) V.

The probe probe_D measures the phase voltages after the conversion to D. Their RMS value is equal to 480 V, the line voltage provided by the voltage source.

Modelica definition

model WyeToDelta "Test for Y to D connection" Buildings.Electrical.AC.ThreePhasesUnbalanced.Interfaces.WyeToDelta wyeToDelta "Conversion of the voltages from Y to D"; Buildings.Electrical.AC.ThreePhasesUnbalanced.Sources.FixedVoltage V1(f=60, V= 480) "Voltage source"; Buildings.Electrical.AC.ThreePhasesUnbalanced.Sensors.ProbeWye probe_Y(perUnit= false, V_nominal=480) "Probe that measures the voltage and the angles on each phase"; Buildings.Electrical.AC.ThreePhasesUnbalanced.Sensors.ProbeWye probeD(perUnit= false, V_nominal=480) "Probe that measures the voltage and the angles on each phase"; equation connect(V1.terminal, wyeToDelta.wye); connect(probe_Y.term, wyeToDelta.wye); connect(probeD.term, wyeToDelta.delta); end WyeToDelta;
Automatically generated Mon May 4 10:19:50 2015.