Buildings.Fluid.Movers.Preconfigured.Validation
Package for validation models
Information
This package contains validation models for the classes in Buildings.Fluid.Movers.Preconfigured.
Extends from Modelica.Icons.ExamplesPackage (Icon for packages containing runnable examples).
Package Content
| Name | Description |
|---|---|
 ControlledFlowMachinePreconfigured
|
Preconfigured fans with different control signals |
Buildings.Fluid.Movers.Preconfigured.Validation.ControlledFlowMachinePreconfigured
Preconfigured fans with different control signals
Information
This model validates the preconfigured mover models. It is based on Buildings.Fluid.Movers.Validation.ControlledFlowMachineDynamic.
Extends from Modelica.Icons.Example (Icon for runnable examples), Buildings.Fluid.Movers.Validation.BaseClasses.ControlledFlowMachine.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| MassFlowRate | m_flow_nominal | 2 | Nominal mass flow rate for each fan [kg/s] |
| PressureDifference | dp_nominal | 500 | Nominal pressure head for each fan [Pa] |
Modelica definition
model ControlledFlowMachinePreconfigured
"Preconfigured fans with different control signals"
extends Modelica.Icons.Example;
extends Buildings.Fluid.Movers.Validation.BaseClasses.ControlledFlowMachine(
redeclare Buildings.Fluid.Movers.Preconfigured.SpeedControlled_y fan1(
redeclare package Medium = Medium,
m_flow_nominal=m_flow_nominal,
dp_nominal=dp_nominal),
redeclare Buildings.Fluid.Movers.Preconfigured.FlowControlled_m_flow fan2(
redeclare package Medium = Medium,
m_flow_nominal=m_flow_nominal,
dp_nominal=dp_nominal),
redeclare Buildings.Fluid.Movers.Preconfigured.FlowControlled_dp fan3(
redeclare package Medium = Medium,
m_flow_nominal=m_flow_nominal,
dp_nominal=dp_nominal),
dp1(m_flow_nominal=m_flow_nominal, dp_nominal=dp_nominal),
dp2(m_flow_nominal=m_flow_nominal, dp_nominal=dp_nominal),
dp3(m_flow_nominal=m_flow_nominal, dp_nominal=dp_nominal));
parameter Modelica.Units.SI.MassFlowRate m_flow_nominal=2
"Nominal mass flow rate for each fan";
parameter Modelica.Units.SI.PressureDifference dp_nominal=500
"Nominal pressure head for each fan";
end ControlledFlowMachinePreconfigured;