Buildings.Fluid.CHPs.BaseClasses.Types
Library of CHP operation modes
Information
In this package, Mode defines all the possible operating modes of CHP units.
Extends from Modelica.Icons.TypesPackage (Icon for packages containing type definitions).
Package Content
Name | Description |
---|---|
Mode | Enumeration for operation mode types |
Types and constants
type Mode = enumeration( Off "Plant completely turned off", StandBy "Plant ready to run but not producing heat/electricity", PumpOn "Pump starts to run", WarmUp "Warm-up mode", Normal "Normal operating mode", CoolDown "Cool-down before going to stand-by or off mode") "Enumeration for operation mode types";
Buildings.Fluid.CHPs.BaseClasses.Types.Mode
Enumeration for operation mode types
Information
Enumeration for the type of modes. The possible values are:
- Off
- StandBy
- PumpOn
- WarmUp
- Normal
- CoolDown
Modelica definition
type Mode = enumeration(
Off "Plant completely turned off",
StandBy "Plant ready to run but not producing heat/electricity",
PumpOn "Pump starts to run",
WarmUp "Warm-up mode",
Normal "Normal operating mode",
CoolDown "Cool-down before going to stand-by or off mode")
"Enumeration for operation mode types";