Buildings.Utilities.Plotters.BaseClasses
Package with base classes for Buildings.Utilities.Plotters
Information
This package contains base classes that are used to construct the models in Buildings.Utilities.Plotters.
Extends from Modelica.Icons.BasesPackage (Icon for packages containing base classes).
Package Content
| Name | Description |
|---|---|
 Backend
|
Backend implementation for the plotter |
 PartialPlotter
|
Partial block for plotters |
 sendReal
|
Function that sends an array of Real values to be written to the html file |
| sendString
|
Function that prints a string to the html file |
| sendTerminalString
|
Function that prints the string to be added at the end of the html file |
Buildings.Utilities.Plotters.BaseClasses.Backend
Backend implementation for the plotter
Information
Class derived from ExternalObject having two local external function definitions,
named destructor and constructor respectively.
These functions create and release an external object that allows multiple plotters to write to the same html output file.
Extends from ExternalObject.
Modelica definition
class Backend "Backend implementation for the plotter"
extends ExternalObject;
function constructor
"Construct the data structure that allows multiple plotters writing to the same html file"
input String fileName "Name of html file to which this block prints";
input String instanceName "Name of the instance of this plotter";
input Integer nDbl "Number of double values in the array that is sent at each sampling time";
output Backend plt "Pointer to data structure for this plotter";
external "C" plt = plotInit(fileName, instanceName, nDbl);
end constructor;
function destructor "Release storage of plotter backend"
input Backend plt;
external "C" plotFree(plt);
end destructor;
end Backend;
Buildings.Utilities.Plotters.BaseClasses.PartialPlotter
Partial block for plotters
Information
Partial block that implements the basic functionality used by the scatter and the time series plotters.
Extends from Modelica.Blocks.Icons.Block (Basic graphical layout of input/output block).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| String | fileName | plotConfiguration.fileName | Name of html file |
| String | introduction | "" | Introduction text written below title and above the plot |
| Activation | |||
| Time | samplePeriod | plotConfiguration.samplePeriod | Sample period of component [s] |
| LocalActivation | activation | Buildings.Utilities.Plotters... | Set to true to enable an input that allows activating and deactivating the plotting |
| Time | activationDelay | plotConfiguration.activation... | Time that needs to elapse to enable plotting after activate becomes true [s] |
| Labels | |||
| String | title | getInstanceName() | Title of the plot |
| String | legend[n] | String array for legend, such as {"x1", "x2"} | |
Connectors
| Type | Name | Description |
|---|---|---|
| input RealVectorInput | y[n] | y-data |
| input BooleanInput | activate | Set to true to enable plotting of time series after activationDelay elapsed |
Modelica definition
partial block PartialPlotter "Partial block for plotters"
extends Modelica.Blocks.Icons.Block;
outer Buildings.Utilities.Plotters.Configuration plotConfiguration
"Default plot configuration";
parameter String fileName = plotConfiguration.fileName "Name of html file";
parameter Modelica.Units.SI.Time samplePeriod(min=1E-3) = plotConfiguration.samplePeriod
"Sample period of component";
parameter String title = getInstanceName() "Title of the plot";
parameter String introduction = ""
"Introduction text written below title and above the plot";
parameter Integer n = 0 "Number of independent data series (dimension of y)";
parameter String[n] legend "String array for legend, such as {\"x1\", \"x2\"}";
parameter Buildings.Utilities.Plotters.Types.LocalActivation activation=
Buildings.Utilities.Plotters.Types.LocalActivation.use_activation
"Set to true to enable an input that allows activating and deactivating the plotting";
parameter Modelica.Units.SI.Time activationDelay(min=0) = plotConfiguration.activationDelay
"Time that needs to elapse to enable plotting after activate becomes true";
Modelica.Blocks.Interfaces.RealVectorInput y[n] "y-data";
Modelica.Blocks.Interfaces.BooleanInput activate
if (activation == Buildings.Utilities.Plotters.Types.LocalActivation.use_input)
"Set to true to enable plotting of time series after activationDelay elapsed";
Boolean active "Flag, true if plots record data";
protected
parameter Modelica.Units.SI.Time t0(fixed=false) "First sample time instant";
parameter String insNam = Modelica.Utilities.Strings.replace(
getInstanceName(), ".", "_")
"Name of this instance with periods replace by underscore";
parameter Boolean connectPoints=
(activation == Buildings.Utilities.Plotters.Types.LocalActivation.always) or
(activation == Buildings.Utilities.Plotters.Types.LocalActivation.use_activation and
plotConfiguration.activation == Buildings.Utilities.Plotters.Types.GlobalActivation.always)
"Flag, true if points should be connected in plots";
parameter String plotMode = "mode: '" +
(if connectPoints then "lines+" else "") + "markers',"
"Configuration to connect or disconnect the points";
Modelica.Blocks.Interfaces.BooleanInput activate_internal
"Internal connector to activate plots";
discrete Modelica.Units.SI.Time tActivateLast
"Time when plotter was the last time activated";
output Boolean sampleTrigger "True, if sample time instant";
Buildings.Utilities.Plotters.BaseClasses.Backend plt=
Buildings.Utilities.Plotters.BaseClasses.Backend(
fileName=fileName,
instanceName=insNam,
nDbl=n+1)
"Object that stores data for this plot";
initial equation
t0 = time;
Buildings.Utilities.Plotters.BaseClasses.sendString(
plt=plt,
string="
<h1>" + title + "</h1>
" + (if (Modelica.Utilities.Strings.length(introduction) > 0) then
"<p>" + introduction + "</p>"
else "") + "
<div id=\"" + insNam + "\"></div>
<script>
");
tActivateLast = time-2*activationDelay;
equation
if (activation == Buildings.Utilities.Plotters.Types.LocalActivation.use_input) then
connect(activate, activate_internal);
elseif (activation == Buildings.Utilities.Plotters.Types.LocalActivation.use_activation) then
activate_internal = plotConfiguration.active;
elseif (activation == Buildings.Utilities.Plotters.Types.LocalActivation.always) then
activate_internal = true;
end if;
when (activate_internal) then
tActivateLast = time;
end when;
active = activate_internal and time >= tActivateLast + activationDelay;
// sample only if the plotter is active
sampleTrigger = active and sample(t0, samplePeriod);
end PartialPlotter;
Buildings.Utilities.Plotters.BaseClasses.sendReal
Function that sends an array of Real values to be written to the html file
Information
External function that prints the array of Real values x
to the plot object.
The number of elements in x is declared in the contructor
Buildings.Utilities.Plotters.BaseClasses.Backend.
Extends from Modelica.Icons.Function (Icon for functions).
Inputs
| Type | Name | Default | Description |
|---|---|---|---|
| Backend | plt | Plot object | |
| Real | x[:] | Array of Real values to be sent to printer |
Modelica definition
function sendReal "Function that sends an array of Real values to be written to the html file"
extends Modelica.Icons.Function;
input Buildings.Utilities.Plotters.BaseClasses.Backend plt
"Plot object";
input Real[:] x "Array of Real values to be sent to printer";
external "C" plotSendReal(plt, x);
end sendReal;
Buildings.Utilities.Plotters.BaseClasses.sendString
Function that prints a string to the html file
Information
External function that prints string
to the plot object.
Extends from Modelica.Icons.Function (Icon for functions).
Inputs
| Type | Name | Default | Description |
|---|---|---|---|
| Backend | plt | Plot object | |
| String | string | String to be printed |
Modelica definition
function sendString "Function that prints a string to the html file"
extends Modelica.Icons.Function;
input Buildings.Utilities.Plotters.BaseClasses.Backend plt
"Plot object";
input String string "String to be printed";
external "C" plotSendString(plt, string);
end sendString;
Buildings.Utilities.Plotters.BaseClasses.sendTerminalString
Function that prints the string to be added at the end of the html file
Information
External function that prints string
to the plot object.
The string will be added at the end of the html file.
Extends from Modelica.Icons.Function (Icon for functions).
Inputs
| Type | Name | Default | Description |
|---|---|---|---|
| Backend | plt | Plot object | |
| String | string | String to be printed |
Modelica definition
function sendTerminalString "Function that prints the string to be added at the end of the html file"
extends Modelica.Icons.Function;
input Buildings.Utilities.Plotters.BaseClasses.Backend plt
"Plot object";
input String string "String to be printed";
external "C" plotSendTerminalString(plt, string);
end sendTerminalString;