Buildings.Templates.AirHandlersFans.Types

Package with type definitions

Information

This package contains type definitions.

Extends from Modelica.Icons.TypesPackage (Icon for packages containing type definitions).

Package Content

Name	Description
Configuration	Enumeration to configure the AHU
Controller	Enumeration to configure the AHU controller
ControlFanReturn	Enumeration to configure the return fan control
HeatRecovery	Enumeration to configure the heat recovery
OutdoorReliefReturnSection	Enumeration to configure the outdoor/relief/return air section
ReliefReturnSection	Enumeration to configure the relief/return air section

Types and constants

  type Configuration = enumeration(
      SupplyOnly
      "Supply only system",
      ExhaustOnly
      "Exhaust only system",
      DualDuct
      "Dual duct system with supply and return",
      SingleDuct
      "Single duct system with supply and return")
    "Enumeration to configure the AHU";

  type Controller = enumeration(
      G36VAVMultiZone
      "Guideline 36 controller for multiple-zone VAV",
      OpenLoop
      "Open loop controller")
    "Enumeration to configure the AHU controller";

  type ControlFanReturn = enumeration(
      AirflowMeasured
      "Airflow tracking with airflow measurement stations",
      BuildingPressure
      "Building pressure (via discharge static pressure)")
    "Enumeration to configure the return fan control";

  type HeatRecovery = enumeration(
      None
      "No heat recovery",
      FlatPlate
      "Flat plate heat exchanger",
      EnthalpyWheel
      "Enthalpy wheel",
      RunAroundCoil
      "Run-around coil")
    "Enumeration to configure the heat recovery";

  type OutdoorReliefReturnSection = enumeration(
      HundredPctOutdoorAir
      "100 % outdoor air system",
      MixedAirWithDamper
      "Mixed air system with return air damper - Optional economizer function",
      MixedAirNoDamper
      "Mixed air system without return air damper - No economizer function",
      MixedAirNoRelief
      "Mixed air system without relief branch - Optional economizer function")
    "Enumeration to configure the outdoor/relief/return air section";

  type ReliefReturnSection = enumeration(
      NoRelief
      "No relief branch",
      NoReturn
      "No return branch",
      ReliefDamper
      "Modulating relief damper without fan",
      ReliefFan
      "Relief fan with two-position relief damper",
      ReturnFan
      "Return fan with modulating relief damper")
    "Enumeration to configure the relief/return air section";