Buildings.Fluid.HeatExchangers.CoolingTowers

Name	Description
FixedApproach	Cooling tower with constant approach temperature
YorkCalc	Cooling tower with variable speed using the York calculation for the approach temperature
Examples	Collection of models that illustrate model use and test models
Correlations	Package with correlations for cooling tower performance
BaseClasses	Package with base classes for Buildings.Fluid.HeatExchangers.CoolingTowers

Model for a steady-state or dynamic cooling tower with constant approach temperature. The approach temperature is the difference between the leaving water temperature and the entering air temperature. The entering air temperature is used from the signal TAir. If connected to the a dry-bulb temperature, then a dry cooling tower is modeled. If connected to a wet-bulb temperature, then a wet cooling tower is modeled.

By connecting a signal that contains either the dry-bulb or the wet-bulb temperature, this model can be used to estimate the water return temperature from a cooling tower. For a more detailed model, use for example the YorkCalc model.

Parameters

Connectors

Modelica definition

Type	Name	Default	Description
replaceable package Medium	PartialMedium	Medium in the component
TemperatureDifference	TApp	2	Approach temperature difference [K]
Nominal condition
MassFlowRate	m_flow_nominal		Nominal mass flow rate [kg/s]
Pressure	dp_nominal		Pressure [Pa]
Initialization
MassFlowRate	m_flow.start	0	Mass flow rate from port_a to port_b (m_flow > 0 is design flow direction) [kg/s]
Pressure	dp.start	0	Pressure difference between port_a and port_b [Pa]
Assumptions
Boolean	allowFlowReversal	system.allowFlowReversal	= true to allow flow reversal, false restricts to design direction (port_a -> port_b)
Advanced
MassFlowRate	m_flow_small	1E-4*abs(m_flow_nominal)	Small mass flow rate for regularization of zero flow [kg/s]
Boolean	homotopyInitialization	true	= true, use homotopy method
Diagnostics
Boolean	show_T	false	= true, if actual temperature at port is computed
Flow resistance
Boolean	from_dp	false	= true, use m_flow = f(dp) else dp = f(m_flow)
Boolean	linearizeFlowResistance	false	= true, use linear relation between m_flow and dp for any flow rate
Real	deltaM	0.1	Fraction of nominal flow rate where flow transitions to laminar
Dynamics
Nominal condition
Time	tau	30	Time constant at nominal flow (if energyDynamics <> SteadyState) [s]
Equations
Dynamics	energyDynamics	Modelica.Fluid.Types.Dynamic...	Formulation of energy balance
Dynamics	massDynamics	energyDynamics	Formulation of mass balance
Initialization
AbsolutePressure	p_start	Medium.p_default	Start value of pressure [Pa]
Temperature	T_start	Medium.T_default	Start value of temperature [K]
MassFraction	X_start[Medium.nX]	Medium.X_default	Start value of mass fractions m_i/m [kg/kg]
ExtraProperty	C_start[Medium.nC]	fill(0, Medium.nC)	Start value of trace substances

Type	Name	Description
FluidPort_a	port_a	Fluid connector a (positive design flow direction is from port_a to port_b)
FluidPort_b	port_b	Fluid connector b (positive design flow direction is from port_a to port_b)
output RealOutput	TLvg	Leaving water temperature
input RealInput	TAir	Entering air dry or wet bulb temperature [K]

model FixedApproach "Cooling tower with constant approach temperature" extends Buildings.Fluid.HeatExchangers.CoolingTowers.BaseClasses.CoolingTower; parameter Modelica.SIunits.TemperatureDifference TApp(min=0, displayUnit="K") = 2 "Approach temperature difference"; Modelica.Blocks.Interfaces.RealInput TAir(min=0, unit="K") "Entering air dry or wet bulb temperature"; equation TAppAct=TApp; TAirHT=TAir; end FixedApproach;

Buildings.Fluid.HeatExchangers.CoolingTowers.YorkCalc

Cooling tower with variable speed using the York calculation for the approach temperature

Buildings.Fluid.HeatExchangers.CoolingTowers.YorkCalc

Information

Model for a steady-state or dynamic cooling tower with variable speed fan using the York calculation for the approach temperature at off-design conditions.

Thermal performance

To compute the thermal performance, this model takes as parameters the approach temperature, the range temperature and the inlet air wet bulb temperature at the design condition. Since the design mass flow rate (of the chiller condenser loop) is also a parameter, these parameters define the rejected heat.

For off-design conditions, the model uses the actual range temperature and a polynomial to compute the approach temperature for free convection and for forced convection, i.e., with the fan operating. The polynomial is valid for a York cooling tower. If the fan input signal y is below the minimum fan revolution yMin, then the cooling tower operates in free convection mode, otherwise it operates in the forced convection mode. For numerical reasons, this transition occurs in the range of y ∈ [0.9*yMin, yMin].

Fan power consumption

In the forced convection mode, the actual fan power is computed as PFan=fanRelPow(y) * PFan_nominal, where the default value for the fan relative power consumption at part load is fanRelPow(y)=y³. In the free convection mode, the fan power consumption is zero. For numerical reasons, the transition of fan power from the part load mode to zero power consumption in the free convection mode occurs in the range y ∈ [0.9*yMin, yMin].
To change the fan relative power consumption at part load in the forced convection mode, points of fan controls signal and associated relative power consumption can be specified. In between these points, the values are interpolated using cubic splines.

Comparison the the cooling tower model of EnergyPlus

This model is similar to the model Cooling Tower:Variable Speed that is implemented in the EnergyPlus building energy simulation program version 6.0. The main differences are

References

Parameters

Connectors

Modelica definition

Type	Name	Default	Description
replaceable package Medium	PartialMedium	Medium in the component
Real	fraPFan_nominal	275/0.15	Fan power divived by water mass flow rate at design condition [W/(kg/s)]
Power	PFan_nominal	fraPFan_nominal*m_flow_nominal	Fan power [W]
efficiencyParameters	fanRelPow		Fan relative power consumption as a function of control signal, fanRelPow=P(y)/P(y=1)
Real	yMin	0.3	Minimum control signal until fan is switched off (used for smoothing between forced and free convection regime)
Real	fraFreCon	0.125	Fraction of tower capacity in free convection regime
Nominal condition
MassFlowRate	m_flow_nominal		Nominal mass flow rate [kg/s]
Pressure	dp_nominal		Pressure [Pa]
Temperature	TAirInWB_nominal	273.15 + 25.55	Design inlet air wet bulb temperature [K]
TemperatureDifference	TApp_nominal	3.89	Design approach temperature [K]
TemperatureDifference	TRan_nominal	5.56	Design range temperature (water in - water out) [K]
Initialization
MassFlowRate	m_flow.start	0	Mass flow rate from port_a to port_b (m_flow > 0 is design flow direction) [kg/s]
Pressure	dp.start	0	Pressure difference between port_a and port_b [Pa]
Assumptions
Boolean	allowFlowReversal	system.allowFlowReversal	= true to allow flow reversal, false restricts to design direction (port_a -> port_b)
Advanced
MassFlowRate	m_flow_small	1E-4*abs(m_flow_nominal)	Small mass flow rate for regularization of zero flow [kg/s]
Boolean	homotopyInitialization	true	= true, use homotopy method
Diagnostics
Boolean	show_T	false	= true, if actual temperature at port is computed
Flow resistance
Boolean	from_dp	false	= true, use m_flow = f(dp) else dp = f(m_flow)
Boolean	linearizeFlowResistance	false	= true, use linear relation between m_flow and dp for any flow rate
Real	deltaM	0.1	Fraction of nominal flow rate where flow transitions to laminar
Dynamics
Nominal condition
Time	tau	30	Time constant at nominal flow (if energyDynamics <> SteadyState) [s]
Equations
Dynamics	energyDynamics	Modelica.Fluid.Types.Dynamic...	Formulation of energy balance
Dynamics	massDynamics	energyDynamics	Formulation of mass balance
Initialization
AbsolutePressure	p_start	Medium.p_default	Start value of pressure [Pa]
Temperature	T_start	Medium.T_default	Start value of temperature [K]
MassFraction	X_start[Medium.nX]	Medium.X_default	Start value of mass fractions m_i/m [kg/kg]
ExtraProperty	C_start[Medium.nC]	fill(0, Medium.nC)	Start value of trace substances

Type	Name	Description
FluidPort_a	port_a	Fluid connector a (positive design flow direction is from port_a to port_b)
FluidPort_b	port_b	Fluid connector b (positive design flow direction is from port_a to port_b)
output RealOutput	TLvg	Leaving water temperature
input RealInput	TAir	Entering air wet bulb temperature [K]
input RealInput	y	Fan control signal

model YorkCalc "Cooling tower with variable speed using the York calculation for the approach temperature" extends Buildings.Fluid.HeatExchangers.CoolingTowers.BaseClasses.CoolingTower; import cha = Buildings.Fluid.Movers.BaseClasses.Characteristics; parameter Modelica.SIunits.Temperature TAirInWB_nominal = 273.15+25.55 "Design inlet air wet bulb temperature"; parameter Modelica.SIunits.TemperatureDifference TApp_nominal(displayUnit="K") = 3.89 "Design approach temperature"; parameter Modelica.SIunits.TemperatureDifference TRan_nominal(displayUnit="K") = 5.56 "Design range temperature (water in - water out)"; parameter Real fraPFan_nominal(unit="W/(kg/s)") = 275/0.15 "Fan power divived by water mass flow rate at design condition"; parameter Modelica.SIunits.Power PFan_nominal = fraPFan_nominal*m_flow_nominal "Fan power"; parameter Buildings.Fluid.Movers.BaseClasses.Characteristics.efficiencyParameters fanRelPow( r_V = {0, 0.1, 0.3, 0.6, 1}, eta = {0, 0.1^3, 0.3^3, 0.6^3, 1}) "Fan relative power consumption as a function of control signal, fanRelPow=P(y)/P(y=1)"; parameter Real yMin(min=0.01, max=1) = 0.3 "Minimum control signal until fan is switched off (used for smoothing between forced and free convection regime)"; parameter Real fraFreCon(min=0, max=1) = 0.125 "Fraction of tower capacity in free convection regime"; Modelica.Blocks.Interfaces.RealInput TAir(min=0, unit="K") "Entering air wet bulb temperature"; Buildings.Fluid.HeatExchangers.CoolingTowers.Correlations.BoundsYorkCalc bou "Bounds for correlation"; Modelica.Blocks.Interfaces.RealInput y "Fan control signal"; Modelica.SIunits.TemperatureDifference TRan(nominal=1, displayUnit="K") "Range temperature"; Modelica.SIunits.MassFraction FRWat "Ratio actual over design water mass flow ratio"; Modelica.SIunits.MassFraction FRAir "Ratio actual over design air mass flow ratio"; Modelica.SIunits.Power PFan "Fan power"; protected parameter Modelica.SIunits.MassFraction FRWat0(min=0, start=1, fixed=false) "Ratio actual over design water mass flow ratio at nominal condition"; parameter Modelica.SIunits.Temperature TWatIn0(fixed=false) "Water inlet temperature at nominal condition"; parameter Modelica.SIunits.Temperature TWatOut_nominal(fixed=false) "Water outlet temperature at nominal condition"; parameter Modelica.SIunits.MassFlowRate mRef_flow(min=0, start=m_flow_nominal, fixed=false) "Reference water flow rate"; Modelica.SIunits.TemperatureDifference dTMax(nominal=1, displayUnit="K") "Maximum possible temperature difference"; Modelica.SIunits.TemperatureDifference TAppCor(min=0, nominal=1, displayUnit="K") "Approach temperature for forced convection"; Modelica.SIunits.TemperatureDifference TAppFreCon(min=0, nominal=1, displayUnit="K") "Approach temperature for free convection"; final parameter Real fanRelPowDer[size(fanRelPow.r_V,1)](fixed=false) "Coefficients for fan relative power consumption as a function of control signal"; Medium.ThermodynamicState staA "Medium properties in port_a"; Medium.ThermodynamicState staB "Medium properties in port_b"; initial equation TWatOut_nominal = TAirInWB_nominal + TApp_nominal; TRan_nominal = TWatIn0 - TWatOut_nominal; // by definition of the range temp. TApp_nominal = Buildings.Fluid.HeatExchangers.CoolingTowers.Correlations.yorkCalc( TRan=TRan_nominal, TWetBul=TAirInWB_nominal, FRWat=FRWat0, FRAir=1); // this will be solved for FRWat0 mRef_flow = m_flow_nominal/FRWat0; // Derivatives for spline that interpolates the fan relative power fanRelPowDer = Buildings.Utilities.Math.Functions.splineDerivatives( x=fanRelPow.r_V, y=fanRelPow.eta, ensureMonotonicity=Buildings.Utilities.Math.Functions.isMonotonic(x=fanRelPow.eta, strict=false)); // Check validity of relative fan power consumption at y=yMin and y=1 assert(cha.efficiency(data=fanRelPow, r_V=yMin, d=fanRelPowDer) > -1E-4, "The fan relative power consumption must be non-negative for y=0." + "\n Obtained fanRelPow(0) = " + String(cha.efficiency(data=fanRelPow, r_V=yMin, d=fanRelPowDer)) + "\n You need to choose different values for the parameter fanRelPow."); assert(abs(1-cha.efficiency(data=fanRelPow, r_V=1, d=fanRelPowDer))<1E-4, "The fan relative power consumption must be one for y=1." + "\n Obtained fanRelPow(1) = " + String(cha.efficiency(data=fanRelPow, r_V=1, d=fanRelPowDer)) + "\n You need to choose different values for the parameter fanRelPow." + "\n To increase the fan power, change fraPFan_nominal or PFan_nominal."); equation // States at the inlet and outlet if allowFlowReversal then if homotopyInitialization then staA=Medium.setState_phX(port_a.p, homotopy(actual=actualStream(port_a.h_outflow), simplified=inStream(port_a.h_outflow)), homotopy(actual=actualStream(port_a.Xi_outflow), simplified=inStream(port_a.Xi_outflow))); staB=Medium.setState_phX(port_b.p, homotopy(actual=actualStream(port_b.h_outflow), simplified=port_b.h_outflow), homotopy(actual=actualStream(port_b.Xi_outflow), simplified=port_b.Xi_outflow)); else staA=Medium.setState_phX(port_a.p, actualStream(port_a.h_outflow), actualStream(port_a.Xi_outflow)); staB=Medium.setState_phX(port_b.p, actualStream(port_b.h_outflow), actualStream(port_b.Xi_outflow)); end if; // homotopyInitialization else // reverse flow not allowed staA=Medium.setState_phX(port_a.p, inStream(port_a.h_outflow), inStream(port_a.Xi_outflow)); staB=Medium.setState_phX(port_b.p, inStream(port_b.h_outflow), inStream(port_b.Xi_outflow)); end if; // Air temperature used for the heat transfer TAirHT=TAir; // Range temperature TRan = Medium.temperature(staA) - Medium.temperature(staB); // Fractional mass flow rates FRWat = m_flow/mRef_flow; FRAir = y; TAppCor = Buildings.Fluid.HeatExchangers.CoolingTowers.Correlations.yorkCalc( TRan=TRan, TWetBul=TAir, FRWat=FRWat, FRAir=max(FRWat/bou.liqGasRat_max, FRAir)); dTMax = Medium.temperature(staA) - TAir; TAppFreCon = (1-fraFreCon) * dTMax + fraFreCon * Buildings.Fluid.HeatExchangers.CoolingTowers.Correlations.yorkCalc( TRan=TRan, TWetBul=TAir, FRWat=FRWat, FRAir=1); // Actual approach temperature and fan power consumption, // which depends on forced vs. free convection. // The transition is for y in [yMin-yMin/10, yMin] [TAppAct, PFan] = Buildings.Utilities.Math.Functions.spliceFunction( pos=[TAppCor, cha.efficiency( data=fanRelPow, r_V=y, d=fanRelPowDer) * PFan_nominal], neg=[TAppFreCon, 0], x=y-yMin+yMin/20, deltax=yMin/20); end YorkCalc;