Performance data for SingleSpeed DXCoils
Information
Package with performance data for DX coils.
Extends from Modelica.Icons.MaterialPropertiesPackage (Icon for package containing property classes).
Package Content
Generic data record for SingleSpeed DXCoils
Information
This record is used as a template for performance data
for SingleSpeed DXCoils
Buildings.Fluid.HeatExchangers.DXCoils.SingleSpeed.
Extends from Buildings.Fluid.HeatExchangers.DXCoils.Data.Generic.DXCoil (Performance record for a DX Cooling Coil with one or multiple stages).
Parameters
| Type | Name | Default | Description |
|---|
| Integer | nSta | 1 | Number of stages |
| Real | minSpeRat | 0.2 | Minimum speed ratio |
| Stage | sta[nSta] | | Data record for coil performance at each stage |
| Minimum conditions |
| MassFlowRate | m_flow_small | 0.0001*sta[1].nomVal.m_flow_... | Small mass flow rate for regularization near zero flow [kg/s] |
Modelica definition
record Generic "Generic data record for SingleSpeed DXCoils"
extends Buildings.Fluid.HeatExchangers.DXCoils.Data.Generic.DXCoil(final nSta=1);
end Generic;
Lennox KCA060S4
Information
Performance data for DX single speed cooling coil model.
This data corresponds to the following EnergyPlus model:
Coil:Cooling:DX:SingleSpeed,
Lennox KCA060S4, !- Name
CoolingCoilAvailSched, !- Availability Schedule Name
18101.22, !- Rated Total Cooling Capacity {W}
0.72, !- Rated Sensible Heat Ratio
4.07, !- Rated COP
0.944, !- Rated Air Flow Rate {m3/s}
, !- Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)}
DXCoilAirInletNode, !- Air Inlet Node Name
DXCoilAirOutletNode, !- Air Outlet Node Name
Lennox KCA060S4 CapFT, !- Total Cooling Capacity Function of Temperature Curve Name
Lennox KCA060S4 CapFFF, !- Total Cooling Capacity Function of Flow Fraction Curve Name
Lennox KCA060S4 EIRFT, !- Energy Input Ratio Function of Temperature Curve Name
Lennox KCA060S4 EIRFFF, !- Energy Input Ratio Function of Flow Fraction Curve Name
Lennox KCA060S4 PLFFPLR; !- Part Load Fraction Correlation Curve Name
Extends from Buildings.Fluid.HeatExchangers.DXCoils.Data.SingleSpeed.Generic (Generic data record for SingleSpeed DXCoils).
Parameters
| Type | Name | Default | Description |
|---|
| Real | minSpeRat | 0.2 | Minimum speed ratio |
| Stage | sta[nSta] | {Buildings.Fluid.HeatExchang... | Data record for coil performance at each stage |
| Minimum conditions |
| MassFlowRate | m_flow_small | 0.0001*sta[1].nomVal.m_flow_... | Small mass flow rate for regularization near zero flow [kg/s] |
Modelica definition
record Lennox_KCA060S4 =
Buildings.Fluid.HeatExchangers.DXCoils.Data.SingleSpeed.Generic (sta = {
Buildings.Fluid.HeatExchangers.DXCoils.Data.Generic.BaseClasses.Stage(spe=1800,
nomVal= Buildings.Fluid.HeatExchangers.DXCoils.Data.Generic.BaseClasses.NominalValues(
Q_flow_nominal= -18101.22,
COP_nominal= 4.07,
SHR_nominal= 0.72,
m_flow_nominal= 1.2*0.944),
perCur=
Buildings.Fluid.HeatExchangers.DXCoils.Data.Generic.BaseClasses.PerformanceCurve(
capFunT= {0.9600147,-0.0106038,0.0013516,0.0039357,-0.0000568,-0.0004915},
capFunFF= {0.7491909,0.3721683,-0.1213592},
EIRFunT= {0.2484029,0.0610633,-0.0017081,-0.0102658,0.0007028,-0.0004237},
EIRFunFF= {1.2094575,-0.3165036,0.1070461},
TConInMin= 273.15 + 18.33,
TConInMax= 273.15 + 35,
TEvaInMin= 273.15 + 17.22,
TEvaInMax= 273.15 + 29.44,
ffMin= 0.8,
ffMax= 1.2))}) "Lennox KCA060S4";
Lennox SCA060H4B
Information
Performance data for DX single speed cooling coil model.
This data corresponds to the following EnergyPlus model:
Coil:Cooling:DX:SingleSpeed,
Lennox SCA060H4B, !- Name
CoolingCoilAvailSched, !- Availability Schedule Name
18452.7, !- Rated Total Cooling Capacity {W}
0.73, !- Rated Sensible Heat Ratio
4.48, !- Rated COP
0.944, !- Rated Air Flow Rate {m3/s}
, !- Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)}
DXCoilAirInletNode, !- Air Inlet Node Name
DXCoilAirOutletNode, !- Air Outlet Node Name
Lennox SCA060H4B CapFT, !- Total Cooling Capacity Function of Temperature Curve Name
Lennox SCA060H4B CapFFF, !- Total Cooling Capacity Function of Flow Fraction Curve Name
Lennox SCA060H4B EIRFT, !- Energy Input Ratio Function of Temperature Curve Name
Lennox SCA060H4B EIRFFF, !- Energy Input Ratio Function of Flow Fraction Curve Name
Lennox SCA060H4B PLFFPLR; !- Part Load Fraction Correlation Curve Name
Extends from Buildings.Fluid.HeatExchangers.DXCoils.Data.SingleSpeed.Generic (Generic data record for SingleSpeed DXCoils).
Parameters
| Type | Name | Default | Description |
|---|
| Real | minSpeRat | 0.2 | Minimum speed ratio |
| Stage | sta[nSta] | {Buildings.Fluid.HeatExchang... | Data record for coil performance at each stage |
| Minimum conditions |
| MassFlowRate | m_flow_small | 0.0001*sta[1].nomVal.m_flow_... | Small mass flow rate for regularization near zero flow [kg/s] |
Modelica definition
record Lennox_SCA060H4B =
Buildings.Fluid.HeatExchangers.DXCoils.Data.SingleSpeed.Generic (sta = {
Buildings.Fluid.HeatExchangers.DXCoils.Data.Generic.BaseClasses.Stage(spe=1800,
nomVal= Buildings.Fluid.HeatExchangers.DXCoils.Data.Generic.BaseClasses.NominalValues(
Q_flow_nominal= -18452.7,
COP_nominal= 4.48,
SHR_nominal= 0.73,
m_flow_nominal= 1.2*0.944),
perCur=
Buildings.Fluid.HeatExchangers.DXCoils.Data.Generic.BaseClasses.PerformanceCurve(
capFunT= {1.0671319,-0.0218036,0.0016875,0.0054500,-0.0000643,-0.0005786},
capFunFF= {0.8174603,0.2420635,-0.0595238},
EIRFunT= {0.4618717,0.0448432,-0.0012979,-0.0158459,0.0007680,-0.0003382},
EIRFunFF= {0.9342105,0.0986842,-0.0328947},
TConInMin= 273.15 + 29.44,
TConInMax= 273.15 + 46.11,
TEvaInMin= 273.15 + 17.22,
TEvaInMax= 273.15 + 21.67,
ffMin= 0.8,
ffMax= 1.2))}) "Lennox SCA060H4B";
Lennox TCA060S2
Information
Performance data for DX single speed cooling coil model.
This data corresponds to the following EnergyPlus model:
Coil:Cooling:DX:SingleSpeed,
Lennox TCA060S2, !- Name
CoolingCoilAvailSched, !- Availability Schedule Name
18452.7, !- Rated Total Cooling Capacity {W}
0.75, !- Rated Sensible Heat Ratio
4.07, !- Rated COP
0.944, !- Rated Air Flow Rate {m3/s}
, !- Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)}
DXCoilAirInletNode, !- Air Inlet Node Name
DXCoilAirOutletNode, !- Air Outlet Node Name
Lennox TCA060S2 CapFT, !- Total Cooling Capacity Function of Temperature Curve Name
Lennox TCA060S2 CapFFF, !- Total Cooling Capacity Function of Flow Fraction Curve Name
Lennox TCA060S2 EIRFT, !- Energy Input Ratio Function of Temperature Curve Name
Lennox TCA060S2 EIRFFF, !- Energy Input Ratio Function of Flow Fraction Curve Name
Lennox TCA060S2 PLFFPLR; !- Part Load Fraction Correlation Curve Name
Extends from Buildings.Fluid.HeatExchangers.DXCoils.Data.SingleSpeed.Generic (Generic data record for SingleSpeed DXCoils).
Parameters
| Type | Name | Default | Description |
|---|
| Real | minSpeRat | 0.2 | Minimum speed ratio |
| Stage | sta[nSta] | {Buildings.Fluid.HeatExchang... | Data record for coil performance at each stage |
| Minimum conditions |
| MassFlowRate | m_flow_small | 0.0001*sta[1].nomVal.m_flow_... | Small mass flow rate for regularization near zero flow [kg/s] |
Modelica definition
record Lennox_TCA060S2 =
Buildings.Fluid.HeatExchangers.DXCoils.Data.SingleSpeed.Generic (sta = {
Buildings.Fluid.HeatExchangers.DXCoils.Data.Generic.BaseClasses.Stage(spe=1800,
nomVal= Buildings.Fluid.HeatExchangers.DXCoils.Data.Generic.BaseClasses.NominalValues(
Q_flow_nominal= -18452.7,
COP_nominal= 4.07,
SHR_nominal= 0.75,
m_flow_nominal= 1.2*0.944),
perCur=
Buildings.Fluid.HeatExchangers.DXCoils.Data.Generic.BaseClasses.PerformanceCurve(
capFunT= {0.9274018,-0.0049893,0.0010446,0.0003500,-0.0000300,-0.0002957},
capFunFF= {0.7539683,0.3650794,-0.1190476},
EIRFunT= {0.5480534,0.0256216,-0.0006559,-0.0031147,0.0006074,-0.0006367},
EIRFunFF= {1.0120192,-0.0420673,0.0300481},
TConInMin= 273.15 + 29.44,
TConInMax= 273.15 + 46.11,
TEvaInMin= 273.15 + 17.22,
TEvaInMax= 273.15 + 21.67,
ffMin= 0.8,
ffMax= 1.2))}) "Lennox TCA060S2";
Carrier Centurion 50PG06
Information
Performance data for DX single speed cooling coil model.
This data corresponds to the following EnergyPlus model:
Coil:Cooling:DX:SingleSpeed,
Carrier Centurion 50PG06, !- Name
CoolingCoilAvailSched, !- Availability Schedule Name
18276.96, !- Rated Total Cooling Capacity {W}
0.74, !- Rated Sensible Heat Ratio
4.15, !- Rated COP
0.944, !- Rated Air Flow Rate {m3/s}
, !- Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)}
DXCoilAirInletNode, !- Air Inlet Node Name
DXCoilAirOutletNode, !- Air Outlet Node Name
Carrier Centurion 50PG06 CapFT, !- Total Cooling Capacity Function of Temperature Curve Name
Carrier Centurion 50PG06 CapFFF, !- Total Cooling Capacity Function of Flow Fraction Curve Name
Carrier Centurion 50PG06 EIRFT, !- Energy Input Ratio Function of Temperature Curve Name
Carrier Centurion 50PG06 EIRFFF, !- Energy Input Ratio Function of Flow Fraction Curve Name
Carrier Centurion 50PG06 PLFFPLR; !- Part Load Fraction Correlation Curve Name
Extends from Buildings.Fluid.HeatExchangers.DXCoils.Data.SingleSpeed.Generic (Generic data record for SingleSpeed DXCoils).
Parameters
| Type | Name | Default | Description |
|---|
| Real | minSpeRat | 0.2 | Minimum speed ratio |
| Stage | sta[nSta] | {Buildings.Fluid.HeatExchang... | Data record for coil performance at each stage |
| Minimum conditions |
| MassFlowRate | m_flow_small | 0.0001*sta[1].nomVal.m_flow_... | Small mass flow rate for regularization near zero flow [kg/s] |
Modelica definition
record Carrier_Centurion_50PG06 =
Buildings.Fluid.HeatExchangers.DXCoils.Data.SingleSpeed.Generic (sta = {
Buildings.Fluid.HeatExchangers.DXCoils.Data.Generic.BaseClasses.Stage(spe=1800,
nomVal= Buildings.Fluid.HeatExchangers.DXCoils.Data.Generic.BaseClasses.NominalValues(
Q_flow_nominal= -18276.96,
COP_nominal= 4.15,
SHR_nominal= 0.74,
m_flow_nominal= 1.2*0.944),
perCur=
Buildings.Fluid.HeatExchangers.DXCoils.Data.Generic.BaseClasses.PerformanceCurve(
capFunT= {0.9953455,-0.0118418,0.0012277,0.0030246,-0.0000702,-0.0003685},
capFunFF= {0.7705358,0.2848007,-0.0580891},
EIRFunT= {0.3802131,0.0199468,-0.0006682,0.0058933,0.0004646,-0.0004072},
EIRFunFF= {1.3439758,-0.5111244,0.1732549},
TConInMin= 273.15 + 15.56,
TConInMax= 273.15 + 51.67,
TEvaInMin= 273.15 + 12.22,
TEvaInMax= 273.15 + 26.67,
ffMin= 0.75,
ffMax= 1.25))}) "Carrier Centurion 50PG06";
Carrier Centurion 50PG12
Information
Performance data for DX single speed cooling coil model.
This data corresponds to the following EnergyPlus model:
Coil:Cooling:DX:SingleSpeed,
Carrier Centurion 50PG12, !- Name
CoolingCoilAvailSched, !- Availability Schedule Name
36788.24, !- Rated Total Cooling Capacity {W}
0.76, !- Rated Sensible Heat Ratio
4.05, !- Rated COP
1.888, !- Rated Air Flow Rate {m3/s}
, !- Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)}
DXCoilAirInletNode, !- Air Inlet Node Name
DXCoilAirOutletNode, !- Air Outlet Node Name
Carrier Centurion 50PG12 CapFT, !- Total Cooling Capacity Function of Temperature Curve Name
Carrier Centurion 50PG12 CapFFF, !- Total Cooling Capacity Function of Flow Fraction Curve Name
Carrier Centurion 50PG12 EIRFT, !- Energy Input Ratio Function of Temperature Curve Name
Carrier Centurion 50PG12 EIRFFF, !- Energy Input Ratio Function of Flow Fraction Curve Name
Carrier Centurion 50PG12 PLFFPLR; !- Part Load Fraction Correlation Curve Name
Extends from Buildings.Fluid.HeatExchangers.DXCoils.Data.SingleSpeed.Generic (Generic data record for SingleSpeed DXCoils).
Parameters
| Type | Name | Default | Description |
|---|
| Real | minSpeRat | 0.2 | Minimum speed ratio |
| Stage | sta[nSta] | {Buildings.Fluid.HeatExchang... | Data record for coil performance at each stage |
| Minimum conditions |
| MassFlowRate | m_flow_small | 0.0001*sta[1].nomVal.m_flow_... | Small mass flow rate for regularization near zero flow [kg/s] |
Modelica definition
record Carrier_Centurion_50PG12 =
Buildings.Fluid.HeatExchangers.DXCoils.Data.SingleSpeed.Generic (sta = {
Buildings.Fluid.HeatExchangers.DXCoils.Data.Generic.BaseClasses.Stage(spe=1800,
nomVal= Buildings.Fluid.HeatExchangers.DXCoils.Data.Generic.BaseClasses.NominalValues(
Q_flow_nominal= -36788.24,
COP_nominal= 4.05,
SHR_nominal= 0.76,
m_flow_nominal= 1.2*1.888),
perCur=
Buildings.Fluid.HeatExchangers.DXCoils.Data.Generic.BaseClasses.PerformanceCurve(
capFunT= {1.0013476,-0.0187754,0.0015312,0.0054931,-0.0000901,-0.0004408},
capFunFF= {0.6460191,0.5455414,-0.1910828},
EIRFunT= {0.3037085,0.0310288,-0.0009543,0.0053687,0.0004729,-0.0004469},
EIRFunFF= {1.3637624,-0.5775338,0.2130374},
TConInMin= 273.15 + 15.56,
TConInMax= 273.15 + 51.67,
TEvaInMin= 273.15 + 12.22,
TEvaInMax= 273.15 + 26.67,
ffMin= 0.75,
ffMax= 1.25))}) "Carrier Centurion 50PG12";
Carrier Centurion 50PG24
Information
Performance data for DX single speed cooling coil model.
This data corresponds to the following EnergyPlus model:
Coil:Cooling:DX:SingleSpeed,
Carrier Centurion 50PG24, !- Name
CoolingCoilAvailSched, !- Availability Schedule Name
73810.8, !- Rated Total Cooling Capacity {W}
0.71, !- Rated Sensible Heat Ratio
3.95, !- Rated COP
3.776, !- Rated Air Flow Rate {m3/s}
, !- Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)}
DXCoilAirInletNode, !- Air Inlet Node Name
DXCoilAirOutletNode, !- Air Outlet Node Name
Carrier Centurion 50PG24 CapFT, !- Total Cooling Capacity Function of Temperature Curve Name
Carrier Centurion 50PG24 CapFFF, !- Total Cooling Capacity Function of Flow Fraction Curve Name
Carrier Centurion 50PG24 EIRFT, !- Energy Input Ratio Function of Temperature Curve Name
Carrier Centurion 50PG24 EIRFFF, !- Energy Input Ratio Function of Flow Fraction Curve Name
Carrier Centurion 50PG24 PLFFPLR; !- Part Load Fraction Correlation Curve Name
Extends from Buildings.Fluid.HeatExchangers.DXCoils.Data.SingleSpeed.Generic (Generic data record for SingleSpeed DXCoils).
Parameters
| Type | Name | Default | Description |
|---|
| Real | minSpeRat | 0.2 | Minimum speed ratio |
| Stage | sta[nSta] | {Buildings.Fluid.HeatExchang... | Data record for coil performance at each stage |
| Minimum conditions |
| MassFlowRate | m_flow_small | 0.0001*sta[1].nomVal.m_flow_... | Small mass flow rate for regularization near zero flow [kg/s] |
Modelica definition
record Carrier_Centurion_50PG24 =
Buildings.Fluid.HeatExchangers.DXCoils.Data.SingleSpeed.Generic (sta = {
Buildings.Fluid.HeatExchangers.DXCoils.Data.Generic.BaseClasses.Stage(spe=1800,
nomVal= Buildings.Fluid.HeatExchangers.DXCoils.Data.Generic.BaseClasses.NominalValues(
Q_flow_nominal= -73810.8,
COP_nominal= 3.95,
SHR_nominal= 0.71,
m_flow_nominal= 1.2*3.776),
perCur=
Buildings.Fluid.HeatExchangers.DXCoils.Data.Generic.BaseClasses.PerformanceCurve(
capFunT= {0.5781158,0.0405917,0.0000113,-0.0095022,0.0000001,-0.0000573},
capFunFF= {0.8328798,0.2403628,-0.0725624},
EIRFunT= {0.5909553,-0.0496529,0.0016569,0.0397786,0.0003938,-0.0016575},
EIRFunFF= {1.0440554,-0.0701720,0.0258826},
TConInMin= 273.15 + 15.56,
TConInMax= 273.15 + 51.67,
TEvaInMin= 273.15 + 12.22,
TEvaInMax= 273.15 + 26.67,
ffMin= 0.75,
ffMax= 1.25))}) "Carrier Centurion 50PG24";
Carrier Comfort 50ES060
Information
Performance data for DX single speed cooling coil model.
This data corresponds to the following EnergyPlus model:
Coil:Cooling:DX:SingleSpeed,
Carrier Comfort 50ES060, !- Name
CoolingCoilAvailSched, !- Availability Schedule Name
17500.95, !- Rated Total Cooling Capacity {W}
0.78, !- Rated Sensible Heat Ratio
3.9, !- Rated COP
0.944, !- Rated Air Flow Rate {m3/s}
, !- Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)}
DXCoilAirInletNode, !- Air Inlet Node Name
DXCoilAirOutletNode, !- Air Outlet Node Name
Carrier Comfort 50ES060 CapFT, !- Total Cooling Capacity Function of Temperature Curve Name
Carrier Comfort 50ES060 CapFFF, !- Total Cooling Capacity Function of Flow Fraction Curve Name
Carrier Comfort 50ES060 EIRFT, !- Energy Input Ratio Function of Temperature Curve Name
Carrier Comfort 50ES060 EIRFFF, !- Energy Input Ratio Function of Flow Fraction Curve Name
Carrier Comfort 50ES060 PLFFPLR; !- Part Load Fraction Correlation Curve Name
Extends from Buildings.Fluid.HeatExchangers.DXCoils.Data.SingleSpeed.Generic (Generic data record for SingleSpeed DXCoils).
Parameters
| Type | Name | Default | Description |
|---|
| Real | minSpeRat | 0.2 | Minimum speed ratio |
| Stage | sta[nSta] | {Buildings.Fluid.HeatExchang... | Data record for coil performance at each stage |
| Minimum conditions |
| MassFlowRate | m_flow_small | 0.0001*sta[1].nomVal.m_flow_... | Small mass flow rate for regularization near zero flow [kg/s] |
Modelica definition
record Carrier_Comfort_50ES060 =
Buildings.Fluid.HeatExchangers.DXCoils.Data.SingleSpeed.Generic (sta = {
Buildings.Fluid.HeatExchangers.DXCoils.Data.Generic.BaseClasses.Stage(spe=1800,
nomVal= Buildings.Fluid.HeatExchangers.DXCoils.Data.Generic.BaseClasses.NominalValues(
Q_flow_nominal= -17500.95,
COP_nominal= 3.9,
SHR_nominal= 0.78,
m_flow_nominal= 1.2*0.944),
perCur=
Buildings.Fluid.HeatExchangers.DXCoils.Data.Generic.BaseClasses.PerformanceCurve(
capFunT= {1.6380187,-0.0747347,0.0029747,0.0015201,-0.0000519,-0.0004509},
capFunFF= {0.8185792,0.2831771,-0.1017563},
EIRFunT= {-0.2209648,0.1033303,-0.0030061,-0.0070657,0.0006322,-0.0002496},
EIRFunFF= {1.0380778,-0.2013868,0.1633090},
TConInMin= 273.15 + 23.89,
TConInMax= 273.15 + 51.67,
TEvaInMin= 273.15 + 13.89,
TEvaInMax= 273.15 + 22.22,
ffMin= 0.875,
ffMax= 1.125))}) "Carrier Comfort 50ES060";
Carrier Weathermaster 50HJ006
Information
Performance data for DX single speed cooling coil model.
This data corresponds to the following EnergyPlus model:
Coil:Cooling:DX:SingleSpeed,
Carrier Weathermaster 50HJ006, !- Name
CoolingCoilAvailSched, !- Availability Schedule Name
18687, !- Rated Total Cooling Capacity {W}
0.73, !- Rated Sensible Heat Ratio
3.9, !- Rated COP
0.944, !- Rated Air Flow Rate {m3/s}
, !- Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)}
DXCoilAirInletNode, !- Air Inlet Node Name
DXCoilAirOutletNode, !- Air Outlet Node Name
Carrier Weathermaster 50HJ006 CapFT, !- Total Cooling Capacity Function of Temperature Curve Name
Carrier Weathermaster 50HJ006 CapFFF, !- Total Cooling Capacity Function of Flow Fraction Curve Name
Carrier Weathermaster 50HJ006 EIRFT, !- Energy Input Ratio Function of Temperature Curve Name
Carrier Weathermaster 50HJ006 EIRFFF, !- Energy Input Ratio Function of Flow Fraction Curve Name
Carrier Weathermaster 50HJ006 PLFFPLR; !- Part Load Fraction Correlation Curve Name
Extends from Buildings.Fluid.HeatExchangers.DXCoils.Data.SingleSpeed.Generic (Generic data record for SingleSpeed DXCoils).
Parameters
| Type | Name | Default | Description |
|---|
| Real | minSpeRat | 0.2 | Minimum speed ratio |
| Stage | sta[nSta] | {Buildings.Fluid.HeatExchang... | Data record for coil performance at each stage |
| Minimum conditions |
| MassFlowRate | m_flow_small | 0.0001*sta[1].nomVal.m_flow_... | Small mass flow rate for regularization near zero flow [kg/s] |
Modelica definition
record Carrier_Weathermaster_50HJ006 =
Buildings.Fluid.HeatExchangers.DXCoils.Data.SingleSpeed.Generic (sta = {
Buildings.Fluid.HeatExchangers.DXCoils.Data.Generic.BaseClasses.Stage(spe=1800,
nomVal= Buildings.Fluid.HeatExchangers.DXCoils.Data.Generic.BaseClasses.NominalValues(
Q_flow_nominal= -18687,
COP_nominal= 3.9,
SHR_nominal= 0.73,
m_flow_nominal= 1.2*0.944),
perCur=
Buildings.Fluid.HeatExchangers.DXCoils.Data.Generic.BaseClasses.PerformanceCurve(
capFunT= {0.3116765,0.0622847,-0.0008633,-0.0066556,-0.0000462,0.0001349},
capFunFF= {0.6583072,0.5294956,-0.1869478},
EIRFunT= {1.0505234,-0.0653230,0.0021068,0.0235557,0.0004542,-0.0014092},
EIRFunFF= {1.3293472,-0.5218591,0.1918220},
TConInMin= 273.15 + 23.89,
TConInMax= 273.15 + 51.67,
TEvaInMin= 273.15 + 16.67,
TEvaInMax= 273.15 + 22.22,
ffMin= 0.75,
ffMax= 1.25))}) "Carrier Weathermaster 50HJ006";
Carrier Weathermaster 50HJ012
Information
Performance data for DX single speed cooling coil model.
This data corresponds to the following EnergyPlus model:
Coil:Cooling:DX:SingleSpeed,
Carrier Weathermaster 50HJ012, !- Name
CoolingCoilAvailSched, !- Availability Schedule Name
36846.82, !- Rated Total Cooling Capacity {W}
0.73, !- Rated Sensible Heat Ratio
3.71, !- Rated COP
1.888, !- Rated Air Flow Rate {m3/s}
, !- Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)}
DXCoilAirInletNode, !- Air Inlet Node Name
DXCoilAirOutletNode, !- Air Outlet Node Name
Carrier Weathermaster 50HJ012 CapFT, !- Total Cooling Capacity Function of Temperature Curve Name
Carrier Weathermaster 50HJ012 CapFFF, !- Total Cooling Capacity Function of Flow Fraction Curve Name
Carrier Weathermaster 50HJ012 EIRFT, !- Energy Input Ratio Function of Temperature Curve Name
Carrier Weathermaster 50HJ012 EIRFFF, !- Energy Input Ratio Function of Flow Fraction Curve Name
Carrier Weathermaster 50HJ012 PLFFPLR; !- Part Load Fraction Correlation Curve Name
Extends from Buildings.Fluid.HeatExchangers.DXCoils.Data.SingleSpeed.Generic (Generic data record for SingleSpeed DXCoils).
Parameters
| Type | Name | Default | Description |
|---|
| Real | minSpeRat | 0.2 | Minimum speed ratio |
| Stage | sta[nSta] | {Buildings.Fluid.HeatExchang... | Data record for coil performance at each stage |
| Minimum conditions |
| MassFlowRate | m_flow_small | 0.0001*sta[1].nomVal.m_flow_... | Small mass flow rate for regularization near zero flow [kg/s] |
Modelica definition
record Carrier_Weathermaster_50HJ012 =
Buildings.Fluid.HeatExchangers.DXCoils.Data.SingleSpeed.Generic (sta = {
Buildings.Fluid.HeatExchangers.DXCoils.Data.Generic.BaseClasses.Stage(spe=1800,
nomVal= Buildings.Fluid.HeatExchangers.DXCoils.Data.Generic.BaseClasses.NominalValues(
Q_flow_nominal= -36846.82,
COP_nominal= 3.71,
SHR_nominal= 0.73,
m_flow_nominal= 1.2*1.888),
perCur=
Buildings.Fluid.HeatExchangers.DXCoils.Data.Generic.BaseClasses.PerformanceCurve(
capFunT= {0.5878544,0.0247382,0.0001631,-0.0034960,-0.0000889,0.0001450},
capFunFF= {0.7232943,0.4292712,-0.1525863},
EIRFunT= {0.6445678,-0.0198276,0.0010284,0.0222812,0.0004996,-0.0015296},
EIRFunFF= {1.2158796,-0.3411366,0.1251095},
TConInMin= 273.15 + 23.89,
TConInMax= 273.15 + 51.67,
TEvaInMin= 273.15 + 16.67,
TEvaInMax= 273.15 + 22.22,
ffMin= 0.75,
ffMax= 1.25))}) "Carrier Weathermaster 50HJ012";
Carrier Weathermaster 50HJ024
Information
Performance data for DX single speed cooling coil model.
This data corresponds to the following EnergyPlus model:
Coil:Cooling:DX:SingleSpeed,
Carrier Weathermaster 50HJ024, !- Name
CoolingCoilAvailSched, !- Availability Schedule Name
73517.9, !- Rated Total Cooling Capacity {W}
0.76, !- Rated Sensible Heat Ratio
3.73, !- Rated COP
3.776, !- Rated Air Flow Rate {m3/s}
, !- Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)}
DXCoilAirInletNode, !- Air Inlet Node Name
DXCoilAirOutletNode, !- Air Outlet Node Name
Carrier Weathermaster 50HJ024 CapFT, !- Total Cooling Capacity Function of Temperature Curve Name
Carrier Weathermaster 50HJ024 CapFFF, !- Total Cooling Capacity Function of Flow Fraction Curve Name
Carrier Weathermaster 50HJ024 EIRFT, !- Energy Input Ratio Function of Temperature Curve Name
Carrier Weathermaster 50HJ024 EIRFFF, !- Energy Input Ratio Function of Flow Fraction Curve Name
Carrier Weathermaster 50HJ024 PLFFPLR; !- Part Load Fraction Correlation Curve Name
Extends from Buildings.Fluid.HeatExchangers.DXCoils.Data.SingleSpeed.Generic (Generic data record for SingleSpeed DXCoils).
Parameters
| Type | Name | Default | Description |
|---|
| Real | minSpeRat | 0.2 | Minimum speed ratio |
| Stage | sta[nSta] | {Buildings.Fluid.HeatExchang... | Data record for coil performance at each stage |
| Minimum conditions |
| MassFlowRate | m_flow_small | 0.0001*sta[1].nomVal.m_flow_... | Small mass flow rate for regularization near zero flow [kg/s] |
Modelica definition
record Carrier_Weathermaster_50HJ024 =
Buildings.Fluid.HeatExchangers.DXCoils.Data.SingleSpeed.Generic (sta = {
Buildings.Fluid.HeatExchangers.DXCoils.Data.Generic.BaseClasses.Stage(spe=1800,
nomVal= Buildings.Fluid.HeatExchangers.DXCoils.Data.Generic.BaseClasses.NominalValues(
Q_flow_nominal= -73517.9,
COP_nominal= 3.73,
SHR_nominal= 0.76,
m_flow_nominal= 1.2*3.776),
perCur=
Buildings.Fluid.HeatExchangers.DXCoils.Data.Generic.BaseClasses.PerformanceCurve(
capFunT= {1.1345120,-0.0239764,0.0012836,0.0023642,-0.0000802,-0.0001980},
capFunFF= {0.7578828,0.3524189,-0.1092772},
EIRFunT= {0.3439210,0.0215041,-0.0006539,0.0073217,0.0003160,-0.0002297},
EIRFunFF= {1.2167653,-0.3411749,0.1233570},
TConInMin= 273.15 + 15.56,
TConInMax= 273.15 + 51.67,
TEvaInMin= 273.15 + 12.22,
TEvaInMax= 273.15 + 26.67,
ffMin= 0.75,
ffMax= 1.25))}) "Carrier Weathermaster 50HJ024";
Goodman CPC060
Information
Performance data for DX single speed cooling coil model.
This data corresponds to the following EnergyPlus model:
Coil:Cooling:DX:SingleSpeed,
Goodman CPC060, !- Name
CoolingCoilAvailSched, !- Availability Schedule Name
17427.55, !- Rated Total Cooling Capacity {W}
0.72, !- Rated Sensible Heat Ratio
3.95, !- Rated COP
0.944, !- Rated Air Flow Rate {m3/s}
, !- Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)}
DXCoilAirInletNode, !- Air Inlet Node Name
DXCoilAirOutletNode, !- Air Outlet Node Name
Goodman CPC060 CapFT, !- Total Cooling Capacity Function of Temperature Curve Name
Goodman CPC060 CapFFF, !- Total Cooling Capacity Function of Flow Fraction Curve Name
Goodman CPC060 EIRFT, !- Energy Input Ratio Function of Temperature Curve Name
Goodman CPC060 EIRFFF, !- Energy Input Ratio Function of Flow Fraction Curve Name
Goodman CPC060 PLFFPLR; !- Part Load Fraction Correlation Curve Name
Extends from Buildings.Fluid.HeatExchangers.DXCoils.Data.SingleSpeed.Generic (Generic data record for SingleSpeed DXCoils).
Parameters
| Type | Name | Default | Description |
|---|
| Real | minSpeRat | 0.2 | Minimum speed ratio |
| Stage | sta[nSta] | {Buildings.Fluid.HeatExchang... | Data record for coil performance at each stage |
| Minimum conditions |
| MassFlowRate | m_flow_small | 0.0001*sta[1].nomVal.m_flow_... | Small mass flow rate for regularization near zero flow [kg/s] |
Modelica definition
record Goodman_CPC060 =
Buildings.Fluid.HeatExchangers.DXCoils.Data.SingleSpeed.Generic (sta = {
Buildings.Fluid.HeatExchangers.DXCoils.Data.Generic.BaseClasses.Stage(spe=1800,
nomVal= Buildings.Fluid.HeatExchangers.DXCoils.Data.Generic.BaseClasses.NominalValues(
Q_flow_nominal= -17427.55,
COP_nominal= 3.95,
SHR_nominal= 0.72,
m_flow_nominal= 1.2*0.944),
perCur=
Buildings.Fluid.HeatExchangers.DXCoils.Data.Generic.BaseClasses.PerformanceCurve(
capFunT= {1.3045870,-0.0618386,0.0024674,0.0081572,-0.0001826,-0.0001610},
capFunFF= {-0.9361345,3.4420168,-1.5058824},
EIRFunT= {0.1618862,0.0531671,-0.0015621,0.0077612,0.0001864,-0.0001388},
EIRFunFF= {2.2905751,-2.2915498,1.0009747},
TConInMin= 273.15 + 18.33,
TConInMax= 273.15 + 46.11,
TEvaInMin= 273.15 + 15,
TEvaInMax= 273.15 + 21.67,
ffMin= 0.875,
ffMax= 1.125))}) "Goodman CPC060";
York Affinity DNP060
Information
Performance data for DX single speed cooling coil model.
This data corresponds to the following EnergyPlus model:
Coil:Cooling:DX:SingleSpeed,
York Affinity DNP060, !- Name
CoolingCoilAvailSched, !- Availability Schedule Name
17200, !- Rated Total Cooling Capacity {W}
0.71, !- Rated Sensible Heat Ratio
3.88, !- Rated COP
0.8496, !- Rated Air Flow Rate {m3/s}
, !- Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)}
DXCoilAirInletNode, !- Air Inlet Node Name
DXCoilAirOutletNode, !- Air Outlet Node Name
York Affinity DNP060 CapFT, !- Total Cooling Capacity Function of Temperature Curve Name
York Affinity DNP060 CapFFF, !- Total Cooling Capacity Function of Flow Fraction Curve Name
York Affinity DNP060 EIRFT, !- Energy Input Ratio Function of Temperature Curve Name
York Affinity DNP060 EIRFFF, !- Energy Input Ratio Function of Flow Fraction Curve Name
York Affinity DNP060 PLFFPLR; !- Part Load Fraction Correlation Curve Name
Extends from Buildings.Fluid.HeatExchangers.DXCoils.Data.SingleSpeed.Generic (Generic data record for SingleSpeed DXCoils).
Parameters
| Type | Name | Default | Description |
|---|
| Real | minSpeRat | 0.2 | Minimum speed ratio |
| Stage | sta[nSta] | {Buildings.Fluid.HeatExchang... | Data record for coil performance at each stage |
| Minimum conditions |
| MassFlowRate | m_flow_small | 0.0001*sta[1].nomVal.m_flow_... | Small mass flow rate for regularization near zero flow [kg/s] |
Modelica definition
record York_Affinity_DNP060 =
Buildings.Fluid.HeatExchangers.DXCoils.Data.SingleSpeed.Generic (sta = {
Buildings.Fluid.HeatExchangers.DXCoils.Data.Generic.BaseClasses.Stage(spe=1800,
nomVal= Buildings.Fluid.HeatExchangers.DXCoils.Data.Generic.BaseClasses.NominalValues(
Q_flow_nominal= -17200,
COP_nominal= 3.88,
SHR_nominal= 0.71,
m_flow_nominal= 1.2*0.8496),
perCur=
Buildings.Fluid.HeatExchangers.DXCoils.Data.Generic.BaseClasses.PerformanceCurve(
capFunT= {0.9829911,-0.0197231,0.0016341,0.0058106,-0.0000309,-0.0005776},
capFunFF= {0.9268752,0.0902018,-0.0175149},
EIRFunT= {0.2246908,0.0390385,-0.0010832,0.0080036,0.0003449,-0.0004327},
EIRFunFF= {2.0004106,-2.4070885,1.3922562},
TConInMin= 273.15 + 23.89,
TConInMax= 273.15 + 51.67,
TEvaInMin= 273.15 + 13.89,
TEvaInMax= 273.15 + 25,
ffMin= 0.833,
ffMax= 1.167))}) "York Affinity DNP060";
York Affinity DNZ060
Information
Performance data for DX single speed cooling coil model.
This data corresponds to the following EnergyPlus model:
Coil:Cooling:DX:SingleSpeed,
York Affinity DNZ060, !- Name
CoolingCoilAvailSched, !- Availability Schedule Name
17395.3, !- Rated Total Cooling Capacity {W}
0.68, !- Rated Sensible Heat Ratio
4.24, !- Rated COP
0.826, !- Rated Air Flow Rate {m3/s}
, !- Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)}
DXCoilAirInletNode, !- Air Inlet Node Name
DXCoilAirOutletNode, !- Air Outlet Node Name
York Affinity DNZ060 CapFT, !- Total Cooling Capacity Function of Temperature Curve Name
York Affinity DNZ060 CapFFF, !- Total Cooling Capacity Function of Flow Fraction Curve Name
York Affinity DNZ060 EIRFT, !- Energy Input Ratio Function of Temperature Curve Name
York Affinity DNZ060 EIRFFF, !- Energy Input Ratio Function of Flow Fraction Curve Name
York Affinity DNZ060 PLFFPLR; !- Part Load Fraction Correlation Curve Name
Extends from Buildings.Fluid.HeatExchangers.DXCoils.Data.SingleSpeed.Generic (Generic data record for SingleSpeed DXCoils).
Parameters
| Type | Name | Default | Description |
|---|
| Real | minSpeRat | 0.2 | Minimum speed ratio |
| Stage | sta[nSta] | {Buildings.Fluid.HeatExchang... | Data record for coil performance at each stage |
| Minimum conditions |
| MassFlowRate | m_flow_small | 0.0001*sta[1].nomVal.m_flow_... | Small mass flow rate for regularization near zero flow [kg/s] |
Modelica definition
record York_Affinity_DNZ060 =
Buildings.Fluid.HeatExchangers.DXCoils.Data.SingleSpeed.Generic (sta = {
Buildings.Fluid.HeatExchangers.DXCoils.Data.Generic.BaseClasses.Stage(spe=1800,
nomVal= Buildings.Fluid.HeatExchangers.DXCoils.Data.Generic.BaseClasses.NominalValues(
Q_flow_nominal= -17395.3,
COP_nominal= 4.24,
SHR_nominal= 0.68,
m_flow_nominal= 1.2*0.826),
perCur=
Buildings.Fluid.HeatExchangers.DXCoils.Data.Generic.BaseClasses.PerformanceCurve(
capFunT= {1.2343140,-0.0398816,0.0019354,0.0062114,-0.0001247,-0.0003619},
capFunFF= {1.2527302,-0.7182445,0.4623738},
EIRFunT= {-0.1272387,0.0848124,-0.0021062,-0.0085792,0.0007783,-0.0005585},
EIRFunFF= {0.6529892,0.8193151,-0.4617716},
TConInMin= 273.15 + 23.89,
TConInMax= 273.15 + 51.67,
TEvaInMin= 273.15 + 13.89,
TEvaInMax= 273.15 + 25,
ffMin= 0.714,
ffMax= 1.2))}) "York Affinity DNZ060";
York Lattitude SJ060
Information
Performance data for DX single speed cooling coil model.
This data corresponds to the following EnergyPlus model:
Coil:Cooling:DX:SingleSpeed,
York Lattitude SJ060, !- Name
CoolingCoilAvailSched, !- Availability Schedule Name
17427.55, !- Rated Total Cooling Capacity {W}
0.70, !- Rated Sensible Heat Ratio
4.25, !- Rated COP
0.944, !- Rated Air Flow Rate {m3/s}
, !- Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)}
DXCoilAirInletNode, !- Air Inlet Node Name
DXCoilAirOutletNode, !- Air Outlet Node Name
York Lattitude SJ060 CapFT, !- Total Cooling Capacity Function of Temperature Curve Name
York Lattitude SJ060 CapFFF, !- Total Cooling Capacity Function of Flow Fraction Curve Name
York Lattitude SJ060 EIRFT, !- Energy Input Ratio Function of Temperature Curve Name
York Lattitude SJ060 EIRFFF, !- Energy Input Ratio Function of Flow Fraction Curve Name
York Lattitude SJ060 PLFFPLR; !- Part Load Fraction Correlation Curve Name
Extends from Buildings.Fluid.HeatExchangers.DXCoils.Data.SingleSpeed.Generic (Generic data record for SingleSpeed DXCoils).
Parameters
| Type | Name | Default | Description |
|---|
| Real | minSpeRat | 0.2 | Minimum speed ratio |
| Stage | sta[nSta] | {Buildings.Fluid.HeatExchang... | Data record for coil performance at each stage |
| Minimum conditions |
| MassFlowRate | m_flow_small | 0.0001*sta[1].nomVal.m_flow_... | Small mass flow rate for regularization near zero flow [kg/s] |
Modelica definition
record York_Lattitude_SJ060 =
Buildings.Fluid.HeatExchangers.DXCoils.Data.SingleSpeed.Generic (sta = {
Buildings.Fluid.HeatExchangers.DXCoils.Data.Generic.BaseClasses.Stage(spe=1800,
nomVal= Buildings.Fluid.HeatExchangers.DXCoils.Data.Generic.BaseClasses.NominalValues(
Q_flow_nominal= -17427.55,
COP_nominal= 4.25,
SHR_nominal= 0.70,
m_flow_nominal= 1.2*0.944),
perCur=
Buildings.Fluid.HeatExchangers.DXCoils.Data.Generic.BaseClasses.PerformanceCurve(
capFunT= {0.8277321,-0.0496772,0.0021600,0.0350767,-0.0004860,-0.0004331},
capFunFF= {1.3022329,-0.7346939,0.4379352},
EIRFunT= {0.1643011,0.0818978,-0.0021640,-0.0183702,0.0007849,-0.0003855},
EIRFunFF= {0.7757255,0.5279901,-0.3030465},
TConInMin= 273.15 + 23.89,
TConInMax= 273.15 + 51.67,
TEvaInMin= 273.15 + 13.89,
TEvaInMax= 273.15 + 22.22,
ffMin= 0.75,
ffMax= 1.25))}) "York Lattitude SJ060";
York Lattitude NM060
Information
Performance data for DX single speed cooling coil model.
This data corresponds to the following EnergyPlus model:
Coil:Cooling:DX:SingleSpeed,
York Lattitude NM060, !- Name
CoolingCoilAvailSched, !- Availability Schedule Name
17100, !- Rated Total Cooling Capacity {W}
0.70, !- Rated Sensible Heat Ratio
3.85, !- Rated COP
0.8024, !- Rated Air Flow Rate {m3/s}
, !- Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)}
DXCoilAirInletNode, !- Air Inlet Node Name
DXCoilAirOutletNode, !- Air Outlet Node Name
York Lattitude NM060 CapFT, !- Total Cooling Capacity Function of Temperature Curve Name
York Lattitude NM060 CapFFF, !- Total Cooling Capacity Function of Flow Fraction Curve Name
York Lattitude NM060 EIRFT, !- Energy Input Ratio Function of Temperature Curve Name
York Lattitude NM060 EIRFFF, !- Energy Input Ratio Function of Flow Fraction Curve Name
York Lattitude NM060 PLFFPLR; !- Part Load Fraction Correlation Curve Name
Extends from Buildings.Fluid.HeatExchangers.DXCoils.Data.SingleSpeed.Generic (Generic data record for SingleSpeed DXCoils).
Parameters
| Type | Name | Default | Description |
|---|
| Real | minSpeRat | 0.2 | Minimum speed ratio |
| Stage | sta[nSta] | {Buildings.Fluid.HeatExchang... | Data record for coil performance at each stage |
| Minimum conditions |
| MassFlowRate | m_flow_small | 0.0001*sta[1].nomVal.m_flow_... | Small mass flow rate for regularization near zero flow [kg/s] |
Modelica definition
record York_Lattitude_NM060 =
Buildings.Fluid.HeatExchangers.DXCoils.Data.SingleSpeed.Generic (sta = {
Buildings.Fluid.HeatExchangers.DXCoils.Data.Generic.BaseClasses.Stage(spe=1800,
nomVal= Buildings.Fluid.HeatExchangers.DXCoils.Data.Generic.BaseClasses.NominalValues(
Q_flow_nominal= -17100,
COP_nominal= 3.85,
SHR_nominal= 0.70,
m_flow_nominal= 1.2*0.8024),
perCur=
Buildings.Fluid.HeatExchangers.DXCoils.Data.Generic.BaseClasses.PerformanceCurve(
capFunT= {1.1028912,-0.0119627,0.0014640,-0.0041312,-0.0000388,-0.0003520},
capFunFF= {0.7060647,0.3967112,-0.1059134},
EIRFunT= {0.0281200,0.0456536,-0.0006039,0.0145030,0.0006477,-0.0014811},
EIRFunFF= {0.4662994,0.2484568,-0.0381443},
TConInMin= 273.15 + 23.89,
TConInMax= 273.15 + 51.67,
TEvaInMin= 273.15 + 13.89,
TEvaInMax= 273.15 + 25,
ffMin= 0.824,
ffMax= 1.47))}) "York Lattitude NM060";
York Predator ZF120
Information
Performance data for DX single speed cooling coil model.
This data corresponds to the following EnergyPlus model:
Coil:Cooling:DX:SingleSpeed,
York Predator ZF120, !- Name
CoolingCoilAvailSched, !- Availability Schedule Name
36905.4, !- Rated Total Cooling Capacity {W}
0.734, !- Rated Sensible Heat Ratio
4.06, !- Rated COP
1.888, !- Rated Air Flow Rate {m3/s}
, !- Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)}
DXCoilAirInletNode, !- Air Inlet Node Name
DXCoilAirOutletNode, !- Air Outlet Node Name
York Predator ZF120 CapFT, !- Total Cooling Capacity Function of Temperature Curve Name
York Predator ZF120 CapFFF, !- Total Cooling Capacity Function of Flow Fraction Curve Name
York Predator ZF120 EIRFT, !- Energy Input Ratio Function of Temperature Curve Name
York Predator ZF120 EIRFFF, !- Energy Input Ratio Function of Flow Fraction Curve Name
York Predator ZF120 PLFFPLR; !- Part Load Fraction Correlation Curve Name
Extends from Buildings.Fluid.HeatExchangers.DXCoils.Data.SingleSpeed.Generic (Generic data record for SingleSpeed DXCoils).
Parameters
| Type | Name | Default | Description |
|---|
| Real | minSpeRat | 0.2 | Minimum speed ratio |
| Stage | sta[nSta] | {Buildings.Fluid.HeatExchang... | Data record for coil performance at each stage |
| Minimum conditions |
| MassFlowRate | m_flow_small | 0.0001*sta[1].nomVal.m_flow_... | Small mass flow rate for regularization near zero flow [kg/s] |
Modelica definition
record York_Predator_ZF120 =
Buildings.Fluid.HeatExchangers.DXCoils.Data.SingleSpeed.Generic (sta = {
Buildings.Fluid.HeatExchangers.DXCoils.Data.Generic.BaseClasses.Stage(spe=1800,
nomVal= Buildings.Fluid.HeatExchangers.DXCoils.Data.Generic.BaseClasses.NominalValues(
Q_flow_nominal= -36905.4,
COP_nominal= 4.06,
SHR_nominal= 0.734,
m_flow_nominal= 1.2*1.888),
perCur=
Buildings.Fluid.HeatExchangers.DXCoils.Data.Generic.BaseClasses.PerformanceCurve(
capFunT= {1.2083456,-0.0287633,0.0022322,0.0019731,-0.0000541,-0.0007392},
capFunFF= {0.6735828,0.4697959,-0.1469388},
EIRFunT= {0.4822073,0.0401530,-0.0015820,-0.0116025,0.0006758,-0.0001198},
EIRFunFF= {1.3074459,-0.4421330,0.1377204},
TConInMin= 273.15 + 23.89,
TConInMax= 273.15 + 51.67,
TEvaInMin= 273.15 + 13.89,
TEvaInMax= 273.15 + 25,
ffMin= 0.625,
ffMax= 1.25))}) "York Predator ZF120";
York Sunline ZR060
Information
Performance data for DX single speed cooling coil model.
This data corresponds to the following EnergyPlus model:
Coil:Cooling:DX:SingleSpeed,
York Sunline ZR060, !- Name
CoolingCoilAvailSched, !- Availability Schedule Name
18687, !- Rated Total Cooling Capacity {W}
0.685, !- Rated Sensible Heat Ratio
3.98, !- Rated COP
0.944, !- Rated Air Flow Rate {m3/s}
, !- Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)}
DXCoilAirInletNode, !- Air Inlet Node Name
DXCoilAirOutletNode, !- Air Outlet Node Name
York Sunline ZR060 CapFT, !- Total Cooling Capacity Function of Temperature Curve Name
York Sunline ZR060 CapFFF, !- Total Cooling Capacity Function of Flow Fraction Curve Name
York Sunline ZR060 EIRFT, !- Energy Input Ratio Function of Temperature Curve Name
York Sunline ZR060 EIRFFF, !- Energy Input Ratio Function of Flow Fraction Curve Name
York Sunline ZR060 PLFFPLR; !- Part Load Fraction Correlation Curve Name
Extends from Buildings.Fluid.HeatExchangers.DXCoils.Data.SingleSpeed.Generic (Generic data record for SingleSpeed DXCoils).
Parameters
| Type | Name | Default | Description |
|---|
| Real | minSpeRat | 0.2 | Minimum speed ratio |
| Stage | sta[nSta] | {Buildings.Fluid.HeatExchang... | Data record for coil performance at each stage |
| Minimum conditions |
| MassFlowRate | m_flow_small | 0.0001*sta[1].nomVal.m_flow_... | Small mass flow rate for regularization near zero flow [kg/s] |
Modelica definition
record York_Sunline_ZR060 =
Buildings.Fluid.HeatExchangers.DXCoils.Data.SingleSpeed.Generic (sta = {
Buildings.Fluid.HeatExchangers.DXCoils.Data.Generic.BaseClasses.Stage(spe=1800,
nomVal= Buildings.Fluid.HeatExchangers.DXCoils.Data.Generic.BaseClasses.NominalValues(
Q_flow_nominal= -18687,
COP_nominal= 3.98,
SHR_nominal= 0.685,
m_flow_nominal= 1.2*0.944),
perCur=
Buildings.Fluid.HeatExchangers.DXCoils.Data.Generic.BaseClasses.PerformanceCurve(
capFunT= {1.1491510,-0.0161007,0.0015936,-0.0027657,-0.0000236,-0.0004692},
capFunFF= {0.3148231,1.0463502,-0.3708016},
EIRFunT= {0.1210878,0.0560928,-0.0012307,0.0092825,0.0005999,-0.0010492},
EIRFunFF= {1.9711221,-1.6315991,0.6688369},
TConInMin= 273.15 + 23.89,
TConInMax= 273.15 + 51.67,
TEvaInMin= 273.15 + 13.89,
TEvaInMax= 273.15 + 25,
ffMin= 0.625,
ffMax= 1.25))}) "York Sunline ZR060";
York Sunline DR060
Information
Performance data for DX single speed cooling coil model.
This data corresponds to the following EnergyPlus model:
Coil:Cooling:DX:SingleSpeed,
York Sunline DR060, !- Name
CoolingCoilAvailSched, !- Availability Schedule Name
17398.26, !- Rated Total Cooling Capacity {W}
0.69, !- Rated Sensible Heat Ratio
4.05, !- Rated COP
0.944, !- Rated Air Flow Rate {m3/s}
, !- Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)}
DXCoilAirInletNode, !- Air Inlet Node Name
DXCoilAirOutletNode, !- Air Outlet Node Name
York Sunline DR060 CapFT, !- Total Cooling Capacity Function of Temperature Curve Name
York Sunline DR060 CapFFF, !- Total Cooling Capacity Function of Flow Fraction Curve Name
York Sunline DR060 EIRFT, !- Energy Input Ratio Function of Temperature Curve Name
York Sunline DR060 EIRFFF, !- Energy Input Ratio Function of Flow Fraction Curve Name
York Sunline DR060 PLFFPLR; !- Part Load Fraction Correlation Curve Name
Extends from Buildings.Fluid.HeatExchangers.DXCoils.Data.SingleSpeed.Generic (Generic data record for SingleSpeed DXCoils).
Parameters
| Type | Name | Default | Description |
|---|
| Real | minSpeRat | 0.2 | Minimum speed ratio |
| Stage | sta[nSta] | {Buildings.Fluid.HeatExchang... | Data record for coil performance at each stage |
| Minimum conditions |
| MassFlowRate | m_flow_small | 0.0001*sta[1].nomVal.m_flow_... | Small mass flow rate for regularization near zero flow [kg/s] |
Modelica definition
record York_Sunline_DR060 =
Buildings.Fluid.HeatExchangers.DXCoils.Data.SingleSpeed.Generic (sta = {
Buildings.Fluid.HeatExchangers.DXCoils.Data.Generic.BaseClasses.Stage(spe=1800,
nomVal= Buildings.Fluid.HeatExchangers.DXCoils.Data.Generic.BaseClasses.NominalValues(
Q_flow_nominal= -17398.26,
COP_nominal= 4.05,
SHR_nominal= 0.69,
m_flow_nominal= 1.2*0.944),
perCur=
Buildings.Fluid.HeatExchangers.DXCoils.Data.Generic.BaseClasses.PerformanceCurve(
capFunT= {1.4767927,-0.0614116,0.0027182,-0.0010838,-0.0000353,-0.0003531},
capFunFF= {0.9156325,0.0076960,0.0769601},
EIRFunT= {-0.2918107,0.0950527,-0.0026508,0.0070978,0.0005090,-0.0006143},
EIRFunFF= {0.9336732,0.2228647,-0.1628839},
TConInMin= 273.15 + 23.89,
TConInMax= 273.15 + 51.67,
TEvaInMin= 273.15 + 13.89,
TEvaInMax= 273.15 + 22.22,
ffMin= 0.75,
ffMax= 1.25))}) "York Sunline DR060";
York Sunline ZF240
Information
Performance data for DX single speed cooling coil model.
This data corresponds to the following EnergyPlus model:
Coil:Cooling:DX:SingleSpeed,
York Sunline ZF240, !- Name
CoolingCoilAvailSched, !- Availability Schedule Name
81807, !- Rated Total Cooling Capacity {W}
0.70, !- Rated Sensible Heat Ratio
3.59, !- Rated COP
3.776, !- Rated Air Flow Rate {m3/s}
, !- Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)}
DXCoilAirInletNode, !- Air Inlet Node Name
DXCoilAirOutletNode, !- Air Outlet Node Name
York Sunline ZF240 CapFT, !- Total Cooling Capacity Function of Temperature Curve Name
York Sunline ZF240 CapFFF, !- Total Cooling Capacity Function of Flow Fraction Curve Name
York Sunline ZF240 EIRFT, !- Energy Input Ratio Function of Temperature Curve Name
York Sunline ZF240 EIRFFF, !- Energy Input Ratio Function of Flow Fraction Curve Name
York Sunline ZF240 PLFFPLR; !- Part Load Fraction Correlation Curve Name
Extends from Buildings.Fluid.HeatExchangers.DXCoils.Data.SingleSpeed.Generic (Generic data record for SingleSpeed DXCoils).
Parameters
| Type | Name | Default | Description |
|---|
| Real | minSpeRat | 0.2 | Minimum speed ratio |
| Stage | sta[nSta] | {Buildings.Fluid.HeatExchang... | Data record for coil performance at each stage |
| Minimum conditions |
| MassFlowRate | m_flow_small | 0.0001*sta[1].nomVal.m_flow_... | Small mass flow rate for regularization near zero flow [kg/s] |
Modelica definition
record York_Sunline_ZF240 =
Buildings.Fluid.HeatExchangers.DXCoils.Data.SingleSpeed.Generic (sta = {
Buildings.Fluid.HeatExchangers.DXCoils.Data.Generic.BaseClasses.Stage(spe=1800,
nomVal= Buildings.Fluid.HeatExchangers.DXCoils.Data.Generic.BaseClasses.NominalValues(
Q_flow_nominal= -81807,
COP_nominal= 3.59,
SHR_nominal= 0.70,
m_flow_nominal= 1.2*3.776),
perCur=
Buildings.Fluid.HeatExchangers.DXCoils.Data.Generic.BaseClasses.PerformanceCurve(
capFunT= {1.0477109,-0.0126686,0.0012838,0.0012381,-0.0000551,-0.0003875},
capFunFF= {0.6042146,0.6557209,-0.2667894},
EIRFunT= {0.4544209,0.0213827,-0.0007051,0.0028662,0.0004214,-0.0003177},
EIRFunFF= {1.4410769,-0.7566253,0.3239453},
TConInMin= 273.15 + 23.89,
TConInMax= 273.15 + 51.67,
TEvaInMin= 273.15 + 13.89,
TEvaInMax= 273.15 + 25,
ffMin= 0.625,
ffMax= 1.25))}) "York Sunline ZF240";
York Sunline DJ240
Information
Performance data for DX single speed cooling coil model.
This data corresponds to the following EnergyPlus model:
Coil:Cooling:DX:SingleSpeed,
York Sunline DJ240, !- Name
CoolingCoilAvailSched, !- Availability Schedule Name
73518, !- Rated Total Cooling Capacity {W}
0.75, !- Rated Sensible Heat Ratio
4.096, !- Rated COP
3.776, !- Rated Air Flow Rate {m3/s}
, !- Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)}
DXCoilAirInletNode, !- Air Inlet Node Name
DXCoilAirOutletNode, !- Air Outlet Node Name
York Sunline DJ240 CapFT, !- Total Cooling Capacity Function of Temperature Curve Name
York Sunline DJ240 CapFFF, !- Total Cooling Capacity Function of Flow Fraction Curve Name
York Sunline DJ240 EIRFT, !- Energy Input Ratio Function of Temperature Curve Name
York Sunline DJ240 EIRFFF, !- Energy Input Ratio Function of Flow Fraction Curve Name
York Sunline DJ240 PLFFPLR; !- Part Load Fraction Correlation Curve Name
Extends from Buildings.Fluid.HeatExchangers.DXCoils.Data.SingleSpeed.Generic (Generic data record for SingleSpeed DXCoils).
Parameters
| Type | Name | Default | Description |
|---|
| Real | minSpeRat | 0.2 | Minimum speed ratio |
| Stage | sta[nSta] | {Buildings.Fluid.HeatExchang... | Data record for coil performance at each stage |
| Minimum conditions |
| MassFlowRate | m_flow_small | 0.0001*sta[1].nomVal.m_flow_... | Small mass flow rate for regularization near zero flow [kg/s] |
Modelica definition
record York_Sunline_DJ240 =
Buildings.Fluid.HeatExchangers.DXCoils.Data.SingleSpeed.Generic (sta = {
Buildings.Fluid.HeatExchangers.DXCoils.Data.Generic.BaseClasses.Stage(spe=1800,
nomVal= Buildings.Fluid.HeatExchangers.DXCoils.Data.Generic.BaseClasses.NominalValues(
Q_flow_nominal= -73518,
COP_nominal= 4.096,
SHR_nominal= 0.75,
m_flow_nominal= 1.2*3.776),
perCur=
Buildings.Fluid.HeatExchangers.DXCoils.Data.Generic.BaseClasses.PerformanceCurve(
capFunT= {1.3804089,-0.0801861,0.0033588,0.0118882,-0.0001339,-0.0005357},
capFunFF= {0.7894654,0.1996615,0.0111454},
EIRFunT= {-0.1635113,0.1222397,-0.0037107,-0.0070372,0.0005052,-0.0002069},
EIRFunFF= {1.5272381,-0.9652850,0.4418485},
TConInMin= 273.15 + 23.89,
TConInMax= 273.15 + 51.67,
TEvaInMin= 273.15 + 13.89,
TEvaInMax= 273.15 + 22.22,
ffMin= 0.75,
ffMax= 1.175))}) "York Sunline DJ240";
Automatically generated Fri Dec 13 11:34:31 2013.
Generic
Buildings.Fluid.HeatExchangers.DXCoils.Data.SingleSpeed.Generic