Buildings.Utilities.Comfort

Home > Modelica

Buildings.Utilities.Comfort

Library with models for comfort

Information

This package contains models for comfort.

Extends from Modelica.Icons.VariantsPackage (Icon for package containing variants).

Package Content

Name Description

Fanger Thermal comfort model according to Fanger

Examples Collection of models that illustrate model use and test models

Name	Description
Fanger	Thermal comfort model according to Fanger
Examples	Collection of models that illustrate model use and test models

Buildings.Utilities.Comfort.Fanger

Thermal comfort model according to Fanger

Buildings.Utilities.Comfort.Fanger

Information

Thermal comfort model according to Fanger, as described in the ASHRAE Fundamentals (1997).

The thermal sensation of a human being is mainly related to the thermal balance of its body as a whole. This balance is influenced by two groups of factors, personal and physical. The activity level and clothing thermal insulation of the subject form the group of personal factors, while the environmental parameters: air temperature, mean radiant temperature, air velocity, and air humidity compose the group of physical factors. When the personal factors have been estimated and the physical factors have been measured the thermal sensation for the body as a whole (general thermal comfort) can be predicted by calculating the PMV index. The PPD index, obtained from the PMV index, provides information on thermal discomfort (thermal dissatisfaction) by predicting the percentage of people likely to feel too hot or too cold in the given thermal environment.

The Predicted Mean Vote (PMV) model combines four physical variables (air temperature, air velocity, mean radiant temperature, and relative humidity), and two personal variables (clothing insulation and activity level) into an index that can be used to predict the average thermal sensation of a large group of people.

To determine appropriate thermal conditions, practitioners refer to standards such as ASHRAE Standard 55 (ASHRAE, 1992) and ISO Standard 7730 (ISO, 1994). These standards define temperature ranges that should result in thermal satisfaction for at least 80% of occupants in a space.

PMV thermal sensation scale

The PMV index predicts the mean value of the votes of a large group of people on the following 7-point thermal sensation scale:

Cold	Cool	Slightly cool	Neutral	Slightly warm	Warm	Hot
-3	-2	-1	0	+1	+2	+3

Operative temperature

For a given space there exists an optimum operative temperature corresponding to PMV=0 (neutral). The operative temperature is defined as: The uniform temperature of an imaginary black enclosure in which an occupant would exchange the same amount of heat by radiation plus convection as in the actual nonuniform environment. The operative temperature is computed as the average of the air temperature and the mean radiant temperature, weighted by their respective heat transfer coefficients (see ASHRAE Fundamentals, 1997, page 8.3, eq (8)).

Optimum operative temperatures

Winter: activity 1.2 met,
clothing = 0.9 clo (sweater, long sleeve shirt, heavy pants),
air flow = 30 fpm (0.15 m/sec),
mean radiant temperature equal to air temperature,
Optimum Operative Temperature (top) = 22.7° C (71° F)

Summer: clothing = 0.5 clo,
air flow = 50 fpm (0.25 m/sec),
Optimum Operative Temperature (top) = 24.4° C (76° F).

All equation numbers in the model refer to the ASHRAE Handbook Fundamentals, Chapter 8, Thermal Comfort, 1997.

Usual ranges of variables (ISO)

M = 46 to 232 W/m^2 (0.8 to 4 met)
ICl = 0 to 2 clo (0 to 0.310 m^2*K/W)
TAir_degC = 10 to 30° C
TRad_degC = 10 to 40° C
vAir = 0 to 1 m/s
pSte = 0 to 2700 Pa

Insulation for clothing ensembles

Clothing is defined in terms of clo units. Clo is a unit used to express the thermal insulation provided by garments and clothing ensembles, where 1 clo = 0.155 (m^2*K/W) (ASHRAE 55-92).

The following table is obtained from ASHRAE page 8.8

Clothing ensemble clo

ASHRAE Standard 55 Winter 0.90

ASHRAE Standard 55 Summer 0.50

Walking shorts, short-sleeve shirt 0.36

Trousers, long-sleeve shirt 0.61

Trousers, long-sleeve shirt, suit jacket 0.96

Trousers, long-sleeve shirt, suit jacket, T-shirt 1.14

Trousers, long-sleeve shirt, long-sleeve sweater, T-shirt 1.01

Same as above + suit jacket, long underwear bottoms 1.30

Sweat pants, sweat shirt 0.74

Knee-length skirt, short-sleeve shirt, panty hose, sandals 0.54

Knee-length skirt, long-sleeve shirt, full slip, panty hose 0.67

Knee-length skirt, long-sleeve shirt, half slip, panty hose, long sleeve sweater 1.10

Long-sleeve coveralls, T-shirt 0.72

Insulated coveralls, long-sleeve, thermal underwear, long underwear bottoms 1.37

Clothing ensemble	clo
ASHRAE Standard 55 Winter	0.90
ASHRAE Standard 55 Summer	0.50
Walking shorts, short-sleeve shirt	0.36
Trousers, long-sleeve shirt	0.61
Trousers, long-sleeve shirt, suit jacket	0.96
Trousers, long-sleeve shirt, suit jacket, T-shirt	1.14
Trousers, long-sleeve shirt, long-sleeve sweater, T-shirt	1.01
Same as above + suit jacket, long underwear bottoms	1.30
Sweat pants, sweat shirt	0.74
Knee-length skirt, short-sleeve shirt, panty hose, sandals	0.54
Knee-length skirt, long-sleeve shirt, full slip, panty hose	0.67
Knee-length skirt, long-sleeve shirt, half slip, panty hose, long sleeve sweater	1.10
Long-sleeve coveralls, T-shirt	0.72
Insulated coveralls, long-sleeve, thermal underwear, long underwear bottoms	1.37

Metabolic rates

One met is defined as 58.2 Watts per square meter which is equal to the energy produced per unit surface area of a seated person at rest.

The following table is obtained from ASHRAE page 8.6.

Activity W/m2 body surface area

ASHRAE Standard 55 58.2

reclining 45

seated and quiet 60

sedentary activity (reading, writing) 60

standing, relaxed 70

office (filling while standing) 80

office (walking) 100

Sleeping 40

Seated quiet 60

Standing Relaxed 70

Walking 3.2 - 6.4km/h 115-220

Reading 55

Writing 60

Typing 65

Lifting/packing 120

Driving Car 60-115

Driving Heavy vehicle 185

Cooking 95-115

Housecleaning 115-200

Machine work 105-235

Pick and shovel work 235-280

Dancing-Social 140-225

Calisthenics 175-235

Basketball 290-440

Wrestling 410-505

Activity	W/m2 body surface area
ASHRAE Standard 55	58.2
reclining	45
seated and quiet	60
sedentary activity (reading, writing)	60
standing, relaxed	70
office (filling while standing)	80
office (walking)	100
Sleeping	40
Seated quiet	60
Standing Relaxed	70
Walking 3.2 - 6.4km/h	115-220
Reading	55
Writing	60
Typing	65
Lifting/packing	120
Driving Car	60-115
Driving Heavy vehicle	185
Cooking	95-115
Housecleaning	115-200
Machine work	105-235
Pick and shovel work	235-280
Dancing-Social	140-225
Calisthenics	175-235
Basketball	290-440
Wrestling	410-505

References

ASHRAE Handbook, Fundamentals (SI Edition). American Society of Heating, Refrigerating and Air-Conditioning Engineers, Chapter 8, Thermal Comfort; pages 8.1-8.26; Atlanta, USA, 1997.
International Standards Organization (ISO). Moderate Thermal Environments: Determination of the PMV and PPD Indices and Specification of the Conditions for Thermal Comfort (ISO 7730). Geneva, Switzerland: ISO. 1994.
Charles, K.E. Fanger Thermal Comfort and Draught Models. Institute for Research in Construction National Research Council of Canada, Ottawa, K1A 0R6, Canada. IRC Research Report RR-162. October 2003. http://irc.nrc-cnrc.gc.ca/ircpubs.
Data, References and Links at: Thermal Comfort; Dr. Sam C M Hui Department of Mechanical Engineering The University of Hong Kong MEBS6006 Environmental Services I; http://me.hku.hk/msc-courses/MEBS6006/index.html

Extends from Buildings.BaseClasses.BaseIcon (Base icon).

Parameters

Type Name Default Description

HeatFlux W 0 Rate of mechanical work accomplished (must be non-positive, typically equal to 0) [W/m2]

CoefficientOfHeatTransfer hRad 0.8*4.7 Radiative heat transfer coefficient [W/(m2.K)]

Conditional inputs

Boolean use_vAir_in false Get the air velocity from the input connector

Boolean use_M_in false Get the metabolic rate from the input connector

Boolean use_ICl_in true Get the clothing insulation from the input connector

Boolean use_pAir_in false Get the air pressure from the input connector

Velocity vAir 0.05 Fixed value for air velocity [m/s]

HeatFlux M 60 Fixed value for metabolic rate [W/m2]

Real ICl Fixed value for clothing insulation in units of clo (summer=0.5; winter=0.9)

Pressure pAir 101325 Fixed value for air pressure [Pa]

Type	Name	Default	Description
HeatFlux	W	0	Rate of mechanical work accomplished (must be non-positive, typically equal to 0) [W/m2]
CoefficientOfHeatTransfer	hRad	0.8*4.7	Radiative heat transfer coefficient [W/(m2.K)]
Conditional inputs
Boolean	use_vAir_in	false	Get the air velocity from the input connector
Boolean	use_M_in	false	Get the metabolic rate from the input connector
Boolean	use_ICl_in	true	Get the clothing insulation from the input connector
Boolean	use_pAir_in	false	Get the air pressure from the input connector
Velocity	vAir	0.05	Fixed value for air velocity [m/s]
HeatFlux	M	60	Fixed value for metabolic rate [W/m2]
Real	ICl		Fixed value for clothing insulation in units of clo (summer=0.5; winter=0.9)
Pressure	pAir	101325	Fixed value for air pressure [Pa]

Connectors

Type Name Description

output RealOutput PMV PMV

output RealOutput PPD PPD [0.05...1]

input RealInput TAir Air temperature [K]

input RealInput TRad Radiation temperature [K]

input RealInput phi Relative humidity

input RealInput pAir_in Air pressure [Pa]

input RealInput ICl_in Clothing thermal resistance in clo

input RealInput vAir_in Air velocity

input RealInput M_in Metabolic heat generation in W/m2 (not in met) [W/m2]

Type	Name	Description
output RealOutput	PMV	PMV
output RealOutput	PPD	PPD [0.05...1]
input RealInput	TAir	Air temperature [K]
input RealInput	TRad	Radiation temperature [K]
input RealInput	phi	Relative humidity
input RealInput	pAir_in	Air pressure [Pa]
input RealInput	ICl_in	Clothing thermal resistance in clo
input RealInput	vAir_in	Air velocity
input RealInput	M_in	Metabolic heat generation in W/m2 (not in met) [W/m2]

Modelica definition

model Fanger "Thermal comfort model according to Fanger"
extends Buildings.BaseClasses.BaseIcon;

  Modelica.Blocks.Interfaces.RealOutput PMV "PMV";
  Modelica.Blocks.Interfaces.RealOutput PPD "PPD [0.05...1]";

  parameter Modelica.SIunits.HeatFlux W(max=0)=0 
    "Rate of mechanical work accomplished (must be non-positive, typically equal to 0)";
  parameter Modelica.SIunits.CoefficientOfHeatTransfer hRad(
    min=0,
    max=10)=0.8*4.7 "Radiative heat transfer coefficient";

  parameter Boolean use_vAir_in=false 
    "Get the air velocity from the input connector";
  parameter Boolean use_M_in= false 
    "Get the metabolic rate from the input connector";
  parameter Boolean use_ICl_in= true 
    "Get the clothing insulation from the input connector";
  parameter Boolean use_pAir_in= false 
    "Get the air pressure from the input connector";

  parameter Modelica.SIunits.Velocity vAir= 0.05 "Fixed value for air velocity";
  parameter Modelica.SIunits.HeatFlux M = 60 "Fixed value for metabolic rate";
  parameter Real ICl 
    "Fixed value for clothing insulation in units of clo (summer=0.5; winter=0.9)";
  parameter Modelica.SIunits.Pressure pAir = 101325 
    "Fixed value for air pressure";

  Modelica.Blocks.Interfaces.RealInput TAir(final quantity="Temperature",
                                          final unit = "K", displayUnit = "degC") 
    "Air temperature";
  Modelica.Blocks.Interfaces.RealInput TRad(final quantity="Temperature",
                                          final unit = "K", displayUnit = "degC") 
    "Radiation temperature";

  Modelica.SIunits.Temperature TOpe "Operative temperature";
  Modelica.SIunits.Temperature TClo "Surface temperature of clothing";
  Modelica.SIunits.Temperature TSki(
    min=273.15+10,
    max=273.15+42) "Skin temperature";

  Modelica.Blocks.Interfaces.RealInput phi(min=0, max=1) "Relative humidity";
  Modelica.Blocks.Interfaces.RealInput pAir_in(
    final quantity="Pressure",
    final unit="Pa",
    min=0) if use_pAir_in "Air pressure";
  Modelica.Blocks.Interfaces.RealInput ICl_in if use_ICl_in 
    "Clothing thermal resistance in clo";
  Modelica.Blocks.Interfaces.RealInput vAir_in if 
       use_vAir_in "Air velocity";
  Modelica.Blocks.Interfaces.RealInput M_in(
    min=40,
    max=600,
    final quantity="HeatFlux",
    final unit="W/m2") if use_M_in 
    "Metabolic heat generation in W/m2 (not in met)";

  Modelica.SIunits.CoefficientOfHeatTransfer hCom(
    min=0,
    max=10) "Combined heat transfer coefficient";

  Modelica.SIunits.CoefficientOfHeatTransfer hCon(
    min=0,
    max=10) "Convective heat transfer coefficient";

  Modelica.SIunits.Pressure pSte(
    min=0,
    max=3000) "Partial pressure of water vapor in ambient air";

  Modelica.SIunits.HeatFlux L "Thermal load of the body";
  Real fCl(min=0) "Clothing area factor (61)";
  Modelica.SIunits.ThermalInsulance RCl "Thermal resistance of clothing (10)";

protected 
  Buildings.Utilities.Psychrometrics.X_pTphi steRat 
    "Model to compute the steam mass fraction";
  Real fCl1 "work variable for fCl";
  Real fCl2 "work variable for fCl";
  Real aux "Auxiliary variable used to eliminate common subexpressions";

  Modelica.Blocks.Interfaces.RealInput vAir_in_internal 
    "Needed to connect to conditional connector";
    Modelica.Blocks.Interfaces.RealInput M_in_internal(
    min=40,
    max=600,
    final quantity="HeatFlux",
    final unit="W/m2") "Needed to connect to conditional connector";
  Modelica.Blocks.Interfaces.RealInput ICl_in_internal 
    "Needed to connect to conditional connector";
  Modelica.Blocks.Interfaces.RealInput pAir_in_internal(
    final quantity="Pressure",
    final unit="Pa",
    min=0) "Needed to connect to conditional connector";

initial equation 
 assert(W <= 0, "Parameter W must be equal to zero or negative.");
equation 
  // Conditional connectors
  connect(vAir_in, vAir_in_internal);
  if not use_vAir_in then
    vAir_in_internal = vAir;
  end if;
  connect(M_in, M_in_internal);
  if not use_M_in then
    M_in_internal = M;
  end if;
  connect(ICl_in, ICl_in_internal);
  if not use_ICl_in then
    ICl_in_internal = ICl;
  end if;
  connect(pAir_in, pAir_in_internal);
  if not use_pAir_in then
    pAir_in_internal = pAir;
  end if;

  TSki = 308.85 - 0.0275*(M_in_internal - W);

  // partial pressure of steam
  steRat.p_in = pAir_in_internal;
  connect(steRat.T, TAir);
  connect(steRat.phi, phi);
  pSte = Psychrometrics.Functions.pW_X(X_w=steRat.X[1], p=pAir_in_internal);

  // clothing insulation value
  RCl = 0.155 * ICl_in_internal;
  // clothing area factor
  fCl1 = 1.00 + 0.2*ICl_in_internal;
  fCl2 = 1.05 + 0.1*ICl_in_internal;

  // fcl eq (61)
  fCl = fCl1 + (fCl2 - fCl1)*Buildings.Utilities.Math.Functions.smoothHeaviside(
                                 x=(ICl_in_internal - 0.5), delta=0.01);
  // hCon, table 6, Mitchell
  hCon = 8.3*Buildings.Utilities.Math.Functions.smoothMax(x1=vAir_in_internal*vAir_in_internal,
                                                          x2=0.0375213,
                                                          deltaX=0.01)^0.3;
  hCom = hRad + hCon;

  // operative temperature (8)
  TOpe = (hRad*TRad + hCon*TAir)/hCom;

  // Clothing temperature (59)
  aux = - 3.05*(5.73 - 0.007*(M_in_internal - W) - pSte*1E-3)
        - 0.42*((M_in_internal - W) - 58.15)
        - 0.0173*M_in_internal*(5.87 - pSte*1E-3)
        - 0.0014*M_in_internal*(307.15 - TAir);

  TClo = Modelica.SIunits.Conversions.from_degC(35.7 - 0.0275 * (M_in_internal-W)
                 - RCl * (  (M_in_internal-W)
                 + aux));
  // heat load on body, see (58)
  L = (M_in_internal - W)
      - 3.96*1e-8*fCl*(TClo^4 - TRad^4)
      - fCl*hCon*(TClo - TAir)
      + aux;

  // PMV (62)
  PMV = (0.303*Modelica.Math.exp(-0.036*M) + 0.028)*L;
  // PPD (64)
  PPD = 1 - 0.95*Modelica.Math.exp(-(0.03353*PMV^4 + 0.2179*PMV^2));
end Fanger;

Automatically generated Wed May 15 11:58:29 2013.